| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The multi-pack-index builtin writes multi-pack-index files, and
uses a 'write' verb to do so. Add a 'verify' verb that checks this
file matches the contents of the pack-indexes it replaces.
The current implementation is a no-op, but will be extended in
small increments in later commits.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running 'git pack-objects --local', we want to avoid packing
objects that are in an alternate. Currently, we check for these
objects using the packed_git_mru list, which excludes the pack-files
covered by a multi-pack-index.
Add a new iteration over the multi-pack-indexes to find these
copies and mark them as unwanted.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many places in the codebase that want to iterate over
all packfiles known to Git. The purposes are wide-ranging, and
those that can take advantage of the multi-pack-index already
do. So, use get_all_packs() instead of get_packed_git() to be
sure we are iterating over all packfiles.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The multi-pack-index builtin has a very simple command-line
interface. Instead of simply reporting usage, give the user a
hint to why the arguments failed.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
|
|
"git cherry-pick --quit" failed to remove CHERRY_PICK_HEAD even
though we won't be in a cherry-pick session after it returns, which
has been corrected.
* nd/cherry-pick-quit-fix:
cherry-pick: fix --quit not deleting CHERRY_PICK_HEAD
|
|
A few preliminary minor clean-ups in the area around submodules.
* sb/submodule-cleanup:
builtin/submodule--helper: remove stray new line
t7410: update to new style
|
|
After a partial clone, repeated fetches from promisor remote would
have accumulated many packfiles marked with .promisor bit without
getting them coalesced into fewer packfiles, hurting performance.
"git repack" now learned to repack them.
* jt/repack-promisor-packs:
repack: repack promisor objects if -a or -A is set
repack: refactor setup of pack-objects cmd
|
|
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
|
|
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
|
|
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.
* jk/for-each-object-iteration:
for_each_*_object: move declarations to object-store.h
cat-file: use a single strbuf for all output
cat-file: split batch "buf" into two variables
cat-file: use oidset check-and-insert
cat-file: support "unordered" output for --batch-all-objects
cat-file: rename batch_{loose,packed}_object callbacks
t1006: test cat-file --batch-all-objects with duplicates
for_each_packed_object: support iterating in pack-order
for_each_*_object: give more comprehensive docstrings
for_each_*_object: take flag arguments as enum
for_each_*_object: store flag definitions in a single location
|
|
"git pull --rebase=interactive" learned "i" as a short-hand for
"interactive".
* js/pull-rebase-type-shorthand:
pull --rebase=<type>: allow single-letter abbreviations for the type
|
|
The parse-options machinery learned to refrain from enclosing
placeholder string inside a "<bra" and "ket>" pair automatically
without PARSE_OPT_LITERAL_ARGHELP. Existing help text for option
arguments that are not formatted correctly have been identified and
fixed.
* rs/parse-opt-lithelp:
parse-options: automatically infer PARSE_OPT_LITERAL_ARGHELP
shortlog: correct option help for -w
send-pack: specify --force-with-lease argument help explicitly
pack-objects: specify --index-version argument help explicitly
difftool: remove angular brackets from argument help
add, update-index: fix --chmod argument help
push: use PARSE_OPT_LITERAL_ARGHELP instead of unbalanced brackets
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--quit is supposed to be --abort but without restoring HEAD. Leaving
CHERRY_PICK_HEAD behind could make other commands mistake that
cherry-pick is still ongoing (e.g. "git commit --amend" will refuse to
work). Clean it too.
For --abort, this job of deleting CHERRY_PICK_HEAD is on "git reset"
so we don't need to do anything else. But let's add extra checks in
--abort tests to confirm.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" sometimes failed to update the remote-tracking refs,
which has been corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: unify ref in and out param
|
|
Leakfix.
* rs/remote-mv-leakfix:
remote: clear string_list after use in mv()
|
|
Doc fix.
* nd/pack-objects-threading-doc:
pack-objects: document about thread synchronization
|
|
The wire-protocol v2 relies on the client to send "ref prefixes" to
limit the bandwidth spent on the initial ref advertisement. "git
fetch $remote branch:branch" that asks tags that point into the
history leading to the "branch" automatically followed sent to
narrow prefix and broke the tag following, which has been fixed.
* jt/tag-following-with-proto-v2-fix:
fetch: send "refs/tags/" prefix upon CLI refspecs
t5702: test fetch with multiple refspecs at a time
|
|
Code clean-up to use size_t/ssize_t when they are the right type.
* jk/size-t:
strbuf_humanise: use unsigned variables
pass st.st_size as hint for strbuf_readlink()
strbuf_readlink: use ssize_t
strbuf: use size_t for length in intermediate variables
reencode_string: use size_t for string lengths
reencode_string: use st_add/st_mult helpers
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
The wire-protocol v2 relies on the client to send "ref prefixes" to
limit the bandwidth spent on the initial ref advertisement. "git
clone" when learned to speak v2 forgot to do so, which has been
corrected.
* bw/clone-ref-prefixes:
clone: send ref-prefixes when using protocol v2
|
|
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
|
|
The for_each_loose_object() and for_each_packed_object()
functions are meant to be part of a unified interface: they
use the same set of for_each_object_flags, and it's not
inconceivable that we might one day add a single
for_each_object() wrapper around them.
Let's put them together in a single file, so we can avoid
awkwardness like saying "the flags for this function are
over in cache.h". Moving the loose functions to packfile.h
is silly. Moving the packed functions to cache.h works, but
makes the "cache.h is a kitchen sink" problem worse. The
best place is the recently-created object-store.h, since
these are quite obviously related to object storage.
The for_each_*_in_objdir() functions do not use the same
flags, but they are logically part of the same interface as
for_each_loose_object(), and share callback signatures. So
we'll move those, as well, as they also make sense in
object-store.h.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we're in batch mode, we end up in batch_object_write()
for each object, which allocates its own strbuf for each
call. Instead, we can provide a single "scratch" buffer that
gets reused for each output. When running:
git cat-file --batch-all-objects --batch-check='%(objectname)'
on git.git, my best-of-five time drops from:
real 0m0.171s
user 0m0.159s
sys 0m0.012s
to:
real 0m0.133s
user 0m0.121s
sys 0m0.012s
Note that we could do this just by putting the "scratch"
pointer into "struct expand_data", but I chose instead to
add an extra parameter to the callstack. That's more
verbose, but it makes it a bit more obvious what is going
on, which in turn makes it easy to see where we need to be
releasing the string in the caller (right after the loop
which uses it in each case).
Based-on-a-patch-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use the "buf" strbuf for two things: to read incoming
lines, and as a scratch space for test-expanding the
user-provided format. Let's split this into two variables
with descriptive names, which makes their purpose and
lifetime more clear.
It will also help in a future patch when we start using the
"output" buffer for more expansions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't need to check if the oidset has our object before
we insert it; that's done as part of the insertion. We can
just rely on the return value from oidset_insert(), which
saves one hash lookup per object.
This measurable speedup is tiny and within the run-to-run
noise, but the result is simpler to read, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Side note, since we gain access to the right repository, we can stop
rely on the_repository in this code as well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're moving away from the_index in this code. "struct index_state *"
could be added to struct apply_state. But let's aim long term and put
struct repository here instead so that we could even avoid more global
states in the future. The index will be available via
apply_state->repo->index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since attr checking API now take the index, there's no need to set an
index in advance with this call. Most call sites are straightforward
because they either pass the_index or NULL (which defaults back to
the_index previously). There's only one suspicious call site in
unpack-trees.c where it sets a different index.
This code in unpack-trees is about to check out entries from the
new/temporary index after merging is done in it. The attributes will
be used by entry.c code to do crlf conversion if needed. entry.c now
respects struct checkout's istate field, and this field is correctly
set in unpack-trees.c, there should be no regression from this change.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
checkout-index.c needs update because if checkout->istate is NULL,
ie_match_stat() will crash. Previously this is ie_match_stat(&the_index, ..)
so it will not crash, but it is not technically correct either.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
write_eolinfo() does take an istate as function argument and it should
be used instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the convert API take an index_state instead of assuming the_index
in convert.c. All external call sites are converted blindly to keep
the patch simple and retain current behavior. Individual call sites
may receive further updates to use the right index instead of
the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the attr API take an index_state instead of assuming the_index in
attr code. All call sites are converted blindly to keep the patch
simple and retain current behavior. Individual call sites may receive
further updates to use the right index instead of the_index.
There is one ugly temporary workaround added in attr.c that needs some
more explanation.
Commit c24f3abace (apply: file commited with CRLF should roundtrip
diff and apply - 2017-08-19) forces one convert_to_git() call to NOT
read the index at all. But what do you know, we read it anyway by
falling back to the_index. When "istate" from convert_to_git is now
propagated down to read_attr_from_array() we will hit segfault
somewhere inside read_blob_data_from_index.
The right way of dealing with this is to kill "use_index" variable and
only follow "istate" but at this stage we are not ready for that:
while most git_attr_set_direction() calls just passes the_index to be
assigned to use_index, unpack-trees passes a different one which is
used by entry.c code, which has no way to know what index to use if we
delete use_index. So this has to be done later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This code is only needed for diff-tree (since f0c6b2a2fd ([PATCH]
Optimize diff-tree -[CM] --stdin - 2005-05-27)). Let the caller do the
preparation instead and avoid read_index() in diff.c code.
read_index() should be avoided (in addition to the_index) because it
uses get_index_file() underneath to get the path $GIT_DIR/index. This
effectively pulls the_repository in and may become the only reason to
pull a 'struct repository *' in diff.c. Let's keep the dependencies as
few as possible and kick it back to diff-tree.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you're going to access the contents of every object in a
packfile, it's generally much more efficient to do so in
pack order, rather than in hash order. That increases the
locality of access within the packfile, which in turn is
friendlier to the delta base cache, since the packfile puts
related deltas next to each other. By contrast, hash order
is effectively random, since the sha1 has no discernible
relationship to the content.
This patch introduces an "--unordered" option to cat-file
which iterates over packs in pack-order under the hood. You
can see the results when dumping all of the file content:
$ time ./git cat-file --batch-all-objects --buffer --batch | wc -c
6883195596
real 0m44.491s
user 0m42.902s
sys 0m5.230s
$ time ./git cat-file --unordered \
--batch-all-objects --buffer --batch | wc -c
6883195596
real 0m6.075s
user 0m4.774s
sys 0m3.548s
Same output, different order, way faster. The same speed-up
applies even if you end up accessing the object content in a
different process, like:
git cat-file --batch-all-objects --buffer --batch-check |
grep blob |
git cat-file --batch='%(objectname) %(rest)' |
wc -c
Adding "--unordered" to the first command drops the runtime
in git.git from 24s to 3.5s.
Side note: there are actually further speedups available
for doing it all in-process now. Since we are outputting
the object content during the actual pack iteration, we
know where to find the object and could skip the extra
lookup done by oid_object_info(). This patch stops short
of that optimization since the underlying API isn't ready
for us to make those sorts of direct requests.
So if --unordered is so much better, why not make it the
default? Two reasons:
1. We've promised in the documentation that --batch-all-objects
outputs in hash order. Since cat-file is plumbing,
people may be relying on that default, and we can't
change it.
2. It's actually _slower_ for some cases. We have to
compute the pack revindex to walk in pack order. And
our de-duplication step uses an oidset, rather than a
sort-and-dedup, which can end up being more expensive.
If we're just accessing the type and size of each
object, for example, like:
git cat-file --batch-all-objects --buffer --batch-check
my best-of-five warm cache timings go from 900ms to
1100ms using --unordered. Though it's possible in a
cold-cache or under memory pressure that we could do
better, since we'd have better locality within the
packfile.
And one final question: why is it "--unordered" and not
"--pack-order"? The answer is again two-fold:
1. "pack order" isn't a well-defined thing across the
whole set of objects. We're hitting loose objects, as
well as objects in multiple packs, and the only
ordering we're promising is _within_ a single pack. The
rest is apparently random.
2. The point here is optimization. So we don't want to
promise any particular ordering, but only to say that
we will choose an ordering which is likely to be
efficient for accessing the object content. That leaves
the door open for further changes in the future without
having to add another compatibility option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're not really doing the batch-show operation in these
callbacks, but just collecting the set of objects. That
distinction will become more important in a future patch, so
let's rename them now to avoid cluttering that diff.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After using this command extensively for the last two months, this
developer came to the conclusion that even if the dual color mode still
leaves a lot of room for confusion about what was actually changed, the
non-dual color mode is substantially worse in that regard.
Therefore, we really want to make the dual color mode the default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When showing what changed between old and new commits, we show a diff of
the patches. This diff is a diff between diffs, therefore there are
nested +/- signs, and it can be relatively hard to understand what is
going on.
With the --dual-color option, the preimage and the postimage are colored
like the diffs they are, and the *outer* +/- sign is inverted for
clarity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When showing the diff between corresponding patches of the two branch
versions, we have to make up a fake filename to run the diff machinery.
That filename does not carry any meaningful information, hence tbdiff
suppresses it. So we should, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main information in the `range-diff` view comes from the list of
matching and non-matching commits, the diffs are additional information.
Indenting them helps with the reading flow.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like tbdiff, we now show the diff between matching patches. This is
a "diff of two diffs", so it can be a bit daunting to read for the
beginner.
An alternative would be to display an interdiff, i.e. the hypothetical
diff which is the result of first reverting the old diff and then
applying the new diff.
Especially when rebasing frequently, an interdiff is often not feasible,
though: if the old diff cannot be applied in reverse (due to a moving
upstream), an interdiff can simply not be inferred.
This commit brings `range-diff` closer to feature parity with regard
to tbdiff.
To make `git range-diff` respect e.g. color.diff.* settings, we have
to adjust git_branch_config() accordingly.
Note: while we now parse diff options such as --color, the effect is not
yet the same as in tbdiff, where also the commit pairs would be colored.
This is left for a later commit.
Note also: while tbdiff accepts the `--no-patches` option to suppress
these diffs between patches, we prefer the `-s` (or `--no-patch`) option
that is automatically supported via our use of diff_opt_parse().
And finally note: to support diff options, we have to call
`parse_options()` such that it keeps unknown options, and then loop over
those and let `diff_opt_parse()` handle them. After that loop, we have
to call `parse_options()` again, to make sure that no unknown options
are left.
Helped-by: Thomas Gummerer <t.gummerer@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At this stage, `git range-diff` can determine corresponding commits
of two related commit ranges. This makes use of the recently introduced
implementation of the linear assignment algorithm.
The core of this patch is a straight port of the ideas of tbdiff, the
apparently dormant project at https://github.com/trast/tbdiff.
The output does not at all match `tbdiff`'s output yet, as this patch
really concentrates on getting the patch matching part right.
Note: due to differences in the diff algorithm (`tbdiff` uses the Python
module `difflib`, Git uses its xdiff fork), the cost matrix calculated
by `range-diff` is different (but very similar) to the one calculated
by `tbdiff`. Therefore, it is possible that they find different matching
commits in corner cases (e.g. when a patch was split into two patches of
roughly equal length).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command does not do a whole lot so far, apart from showing a usage
that is oddly similar to that of `git tbdiff`. And for a good reason:
the next commits will turn `range-branch` into a full-blown replacement
for `tbdiff`.
At this point, we ignore tbdiff's color options, as they will all be
implemented later using diff_options.
Since f318d739159 (generate-cmds.sh: export all commands to
command-list.h, 2018-05-10), every new command *requires* a man page to
build right away, so let's also add a blank man page, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, repack does not touch promisor packfiles at all, potentially
causing the performance of repositories that have many such packfiles to
drop. Therefore, repack all promisor objects if invoked with -a or -A.
This is done by an additional invocation of pack-objects on all promisor
objects individually given, which takes care of deduplication and allows
the resulting packfiles to respect flags such as --max-pack-size.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subsequent patch will teach repack to run pack-objects with some same
and some different arguments if repacking of promisor objects is
required. Refactor the setup of the pack-objects cmd so that setting up
the arguments common to both is done in a function.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git for Windows' original 4aa8b8c8283 (Teach 'git pull' to handle
--rebase=interactive, 2011-10-21) had support for the very convenient
abbreviation
git pull --rebase=i
which was later lost when it was ported to the builtin `git pull`, and
it was not introduced before the patch eventually made it into Git as
f5eb87b98dd (pull: allow interactive rebase with --rebase=interactive,
2016-01-13).
However, it is *really* a useful short hand for the occasional rebasing
pull on branches that do not usually want to be rebased.
So let's reintroduce this convenience, at long last.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Junio C Hamano
Stefan Beller
Nguyễn Thái Ngọc Duy
Jeff King
Johannes Schindelin
Jonathan Tan