| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message update/clarification.
* sg/worktree-remove-errormsg:
worktree remove: clarify error message on dirty worktree
|
|
The code to write commit-graph over given commit object names has
been made a bit more robust.
* sg/commit-graph-validate:
commit-graph: error out on invalid commit oids in 'write --stdin-commits'
commit-graph: turn a group of write-related macro flags into an enum
t5318-commit-graph: use 'test_expect_code'
|
|
"git checkout" and "git restore" to re-populate the index from a
tree-ish (typically HEAD) did not work correctly for a path that
was removed and then added again with the intent-to-add bit, when
the corresponding working tree file was empty. This has been
corrected.
* vn/restore-empty-ita-corner-case-fix:
restore: add test for deleted ita files
checkout.c: unstage empty deleted ita files
|
|
Codepaths to walk tree objects have been audited for integer
overflows and hardened.
* jk/tree-walk-overflow:
tree-walk: harden make_traverse_path() length computations
tree-walk: add a strbuf wrapper for make_traverse_path()
tree-walk: accept a raw length for traverse_path_len()
tree-walk: use size_t consistently
tree-walk: drop oid from traverse_info
setup_traverse_info(): stop copying oid
|
|
"git grep --recurse-submodules" that looks at the working tree
files looked at the contents in the index in submodules, instead of
files in the working tree.
* mt/grep-submodules-working-tree:
grep: fix worktree case in submodules
|
|
To avoid data loss, 'git worktree remove' refuses to delete a worktree
if it's dirty or contains untracked files. However, the error message
only mentions that the worktree "is dirty", even if the worktree in
question is in fact clean, but contains untracked files:
$ git worktree add test-worktree
Preparing worktree (new branch 'test-worktree')
HEAD is now at aa53e60 Initial
$ >test-worktree/untracked-file
$ git worktree remove test-worktree/
fatal: 'test-worktree/' is dirty, use --force to delete it
$ git -C test-worktree/ diff
$ git -C test-worktree/ diff --cached
$ # Huh? Where are those dirty files?!
Clarify this error message to say that the worktree "contains modified
or untracked files".
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While 'git commit-graph write --stdin-commits' expects commit object
ids as input, it accepts and silently skips over any invalid commit
object ids, and still exits with success:
# nonsense
$ echo not-a-commit-oid | git commit-graph write --stdin-commits
$ echo $?
0
# sometimes I forgot that refs are not good...
$ echo HEAD | git commit-graph write --stdin-commits
$ echo $?
0
# valid tree OID, but not a commit OID
$ git rev-parse HEAD^{tree} | git commit-graph write --stdin-commits
$ echo $?
0
$ ls -l .git/objects/info/commit-graph
ls: cannot access '.git/objects/info/commit-graph': No such file or directory
Check that all input records are indeed valid commit object ids and
return with error otherwise, the same way '--stdin-packs' handles
invalid input; see e103f7276f (commit-graph: return with errors during
write, 2019-06-12).
Note that it should only return with error when encountering an
invalid commit object id coming from standard input. However,
'--reachable' uses the same code path to process object ids pointed to
by all refs, and that includes tag object ids as well, which should
still be skipped over. Therefore add a new flag to 'enum
commit_graph_write_flags' and a corresponding field to 'struct
write_commit_graph_context', so we can differentiate between those two
cases.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for making "git log" use the mailmap by default.
* jc/log-mailmap-flip-defaults:
log: really flip the --mailmap default
log: flip the --mailmap default unconditionally
|
|
It is possible to delete a committed file from the index and then add it
as intent-to-add. After `git checkout HEAD <pathspec>`, the file should
be identical in the index and HEAD. The command already works correctly
if the file has contents in HEAD. This patch provides the desired
behavior even when the file is empty in HEAD.
`git checkout HEAD <pathspec>` calls tree.c:read_tree_1(), with fn
pointing to checkout.c:update_some(). update_some() creates a new cache
entry but discards it when its mode and oid match those of the old
entry. A cache entry for an ita file and a cache entry for an empty file
have the same oid. Therefore, an empty deleted ita file previously
passed both of these checks, and the new entry was discarded, so the
file remained unchanged in the index. After this fix, if the file is
marked as ita in the cache, then we avoid discarding the new entry and
add the new entry to the cache instead.
This change should not affect newly added ita files. For those, inside
tree.c:read_tree_1(), tree_entry_interesting() returns
entry_not_interesting, so fn is never called.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Varun Naik <vcnaik94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the docs, test the interaction between the new default,
configuration and command line option, in addition to actually
flipping the default.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All but one of the callers of make_traverse_path() allocate a new heap
buffer to store the path. Let's give them an easy way to write to a
strbuf, which saves them from computing the length themselves (which is
especially tricky when they want to add to the path). It will also make
it easier for us to change the make_traverse_path() interface in a
future patch to improve its bounds-checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We take a "struct name_entry", but only care about the length of the
path name. Let's just take that length directly, making it easier to use
the function from callers that sometimes do not have a name_entry at
all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Squelch unneeded and misleading warnings from "repack" when the
command attempts to generate pack bitmaps without explicitly asked
for by the user.
* jk/repack-silence-auto-bitmap-warning:
repack: simplify handling of auto-bitmaps and .keep files
repack: silence warnings when auto-enabled bitmaps cannot be built
t7700: clean up .keep file in bitmap-writing test
|
|
It turns out that being cautious to warn against upcoming default
change was an unpopular behaviour, and such a care can easily be
defeated by distro packagers to render it ineffective anyway.
Just flip the default, with only a mention in the release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Compilation fix.
* jk/no-system-includes-in-dot-c:
wt-status.h: drop stdio.h include
verify-tag: drop signal.h include
|
|
As the previous commit shows, the presence of an oid in each level of
the traverse_info is confusing and ultimately not necessary. Let's drop
it to make it clear that it will not always be set (as well as convince
us that it's unused, and let the compiler catch any merges with other
branches that do add new uses).
Since the oid is part of name_entry, we'll actually stop embedding a
name_entry entirely, and instead just separately hold the pathname, its
length, and the mode.
This makes the resulting code slightly more verbose as we have to pass
those elements around individually. But it also makes it more clear what
each code path is going to use (and in most of the paths, we really only
care about the pathname itself).
A few of these conversions are noisier than they need to be, as they
also take the opportunity to rename "len" to "namelen" for clarity
(especially where we also have "pathlen" or "ce_len" alongside).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We assume that if setup_traverse_info() is passed a non-empty "base"
string, that string is pointing into a tree object and we can read the
object oid by skipping past the trailing NUL.
As it turns out, this is not true for either of the two calls, and we
may end up reading garbage bytes:
1. In git-merge-tree, our base string is either empty (in which case
we'd never run this code), or it comes from our traverse_path()
helper. The latter overallocates a buffer by the_hash_algo->rawsz
bytes, but then fills it with only make_traverse_path(), leaving
those extra bytes uninitialized (but part of a legitimate heap
buffer).
2. In unpack_trees(), we pass o->prefix, which is some arbitrary
string from the caller. In "git read-tree --prefix=foo", for
instance, it will point to the command-line parameter, and we'll
read 20 bytes past the end of the string.
Interestingly, tools like ASan do not detect (2) because the process
argv is part of a big pre-allocated buffer. So we're reading trash, but
it's trash that's probably part of the next argument, or the
environment.
You can convince it to fail by putting something like this at the
beginning of common-main.c's main() function:
{
int i;
for (i = 0; i < argc; i++)
argv[i] = xstrdup_or_null(argv[i]);
}
That puts the arguments into their own heap buffers, so running:
make SANITIZE=address test
will find problems when "read-tree --prefix" is used (e.g., in t3030).
Doubly interesting, even with the hackery above, this does not fail
prior to ea82b2a085 (tree-walk: store object_id in a separate member,
2019-01-15). That commit switched setup_traverse_info() to actually
copying the hash, rather than simply pointing to it. That pointer was
always pointing to garbage memory, but that commit started actually
dereferencing the bytes, which is what triggers ASan.
That also implies that nobody actually cares about reading these oid
bytes anyway (or at least no path covered by our tests). And manual
inspection of the code backs that up (I'll follow this patch with some
cleanups that show definitively this is the case, but they're quite
invasive, so it's worth doing this fix on its own).
So let's drop the bogus hashcpy(), along with the confusing oversizing
in merge-tree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7328482253 (repack: disable bitmaps-by-default if .keep files
exist, 2019-06-29) taught repack to prefer disabling bitmaps to
duplicating objects (unless bitmaps were asked for explicitly).
But there's an easier way to do this: if we keep passing the
--honor-pack-keep flag to pack-objects when auto-enabling bitmaps, then
pack-objects already makes the same decision (it will disable bitmaps
rather than duplicate). Better still, pack-objects can actually decide
to do so based not just on the presence of a .keep file, but on whether
that .keep file actually impacts the new pack we're making (so if we're
racing with a push or fetch, for example, their temporary .keep file
will not block us from generating bitmaps if they haven't yet updated
their refs).
And because repack uses the --write-bitmap-index-quiet flag, we don't
have to worry about pack-objects generating confusing warnings when it
does see a .keep file. We can confirm this by tweaking the .keep test to
check repack's stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on various config options, a full repack may not be able to
build a reachability bitmap index (e.g., if pack.packSizeLimit forces us
to write multiple packs). In these cases pack-objects may write a
warning to stderr.
Since 36eba0323d (repack: enable bitmaps by default on bare repos,
2019-03-14), we may generate these warnings even when the user did not
explicitly ask for bitmaps. This has two downsides:
- it can be confusing, if they don't know what bitmaps are
- a daemonized auto-gc will write this to its log file, and the
presence of the warning may suppress further auto-gc (until
gc.logExpiry has elapsed)
Let's have repack communicate to pack-objects that the choice to turn on
bitmaps was not made explicitly by the user, which in turn allows
pack-objects to suppress these warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running git-grep with --recurse-submodules results in a cached grep for
the submodules even when --cached is not used. This makes all
modifications in submodules' tracked files be always ignored when
grepping. Solve that making git-grep respect the cached option when
invoking grep_cache() inside grep_submodule(). Also, add tests to
ensure that the desired behavior is performed.
Reported-by: Daniel Zaoui <jackdanielz@eyomi.org>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few leftover cleanup to "git rebase" in C.
* js/rebase-cleanup:
git: mark cmd_rebase as requiring a worktree
rebase: fix white-space
|
|
Code restructuring during 2.20 period broke fetching tags via
"import" based transports.
* fc/fetch-with-import-fix:
fetch: fix regression with transport helpers
fetch: make the code more understandable
fetch: trivial cleanup
t5801 (remote-helpers): add test to fetch tags
t5801 (remote-helpers): cleanup refspec stuff
|
|
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
commit-graph: extract write_commit_graph_file()
commit-graph: extract copy_oids_to_commits()
commit-graph: extract count_distinct_commits()
commit-graph: extract fill_oids_from_all_packs()
commit-graph: extract fill_oids_from_commit_hex()
commit-graph: extract fill_oids_from_packs()
commit-graph: create write_commit_graph_context
commit-graph: remove Future Work section
commit-graph: collapse parameters into flags
commit-graph: return with errors during write
commit-graph: fix the_repository reference
|
|
Code clean-up to avoid signed integer overlaps during binary search.
* rs/avoid-overflow-in-midpoint-computation:
cleanup: fix possible overflow errors in binary search, part 2
|
|
"git interpret-trailers" always treated '#' as the comment
character, regardless of core.commentChar setting, which has been
corrected.
* jk/trailers-use-config:
interpret-trailers: load default config
|
|
"git stash show 23" used to work, but no more after getting
rewritten in C; this regression has been corrected.
* tg/stash-ref-by-index-fix:
stash: fix show referencing stash index
|
|
"git rebase --abort" used to leave refs/rewritten/ when concluding
"git rebase -r", which has been corrected.
* pw/rebase-abort-clean-rewritten:
rebase --abort/--quit: cleanup refs/rewritten
sequencer: return errors from sequencer_remove_state()
rebase: warn if state directory cannot be removed
rebase: fix a memory leak
|
|
The codepath to compute delta islands used to spew progress output
without giving the callers any way to squelch it, which has been
fixed.
* jk/delta-islands-progress-fix:
delta-islands: respect progress flag
|
|
"git submodule foreach" did not protect command line options passed
to the command to be run in each submodule correctly, when the
"--recursive" option was in use.
* ms/submodule-foreach-fix:
submodule foreach: fix recursion of options
|
|
The configuration variable rebase.rescheduleFailedExec should be
effective only while running an interactive rebase and should not
affect anything when running an non-interactive one, which was not
the case. This has been corrected.
* js/rebase-reschedule-applies-only-to-interactive:
rebase --am: ignore rebase.rescheduleFailedExec
|
|
"git rm" to resolve a conflicted path leaked an internal message
"needs merge" before actually removing the path, which was
confusing. This has been corrected.
* jc/denoise-rm-to-resolve:
rm: resolving by removal is not a warning-worthy event
|
|
"git clean" silently skipped a path when it cannot lstat() it; now
it gives a warning.
* js/clean-report-too-long-a-path:
clean: show an error message when the path is too long
|
|
Doc update.
* po/doc-branch:
doc branch: provide examples for listing remote tracking branches
|
|
Code cleanup.
* js/bisect-helper-check-get-oid-return-value:
bisect--helper: verify HEAD could be parsed before continuing
|
|
"git fetch" into a lazy clone forgot to fetch base objects that are
necessary to complete delta in a thin packfile, which has been
corrected.
* jt/partial-clone-missing-ref-delta-base:
t5616: cover case of client having delta base
t5616: use correct flag to check object is missing
index-pack: prefetch missing REF_DELTA bases
t5616: refactor packfile replacement
|
|
When creating a partial clone, the object filtering criteria is
recorded for the origin of the clone, but this incorrectly used a
hardcoded name "origin" to name that remote; it has been corrected
to honor the "--origin <name>" option.
* xl/record-partial-clone-origin:
clone: respect user supplied origin name when setting up partial clone
|
|
The data collected by fsmonitor was not properly written back to
the on-disk index file, breaking t7519 tests occasionally, which
has been corrected.
* js/fsmonitor-unflake:
mark_fsmonitor_valid(): mark the index as changed if needed
fill_stat_cache_info(): prepare for an fsmonitor fix
|
|
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
|
|
"git am -i --resolved" segfaulted after trying to see a commit as
if it were a tree, which has been corrected.
* jk/am-i-resolved-fix:
am: fix --interactive HEAD tree resolution
am: drop tty requirement for --interactive
am: read interactive input from stdin
am: simplify prompt response handling
|
|
A relative pathname given to "git init --template=<path> <repo>"
ought to be relative to the directory "git init" gets invoked in,
but it instead was made relative to the repository, which has been
corrected.
* nd/init-relative-template-fix:
init: make --template path relative to $CWD
|
|
"git rm" to resolve a conflicted path leaked an internal message
"needs merge" before actually removing the path, which was
confusing. This has been corrected.
* jc/denoise-rm-to-resolve:
rm: resolving by removal is not a warning-worthy event
|
|
"git clean" silently skipped a path when it cannot lstat() it; now
it gives a warning.
* js/clean-report-too-long-a-path:
clean: show an error message when the path is too long
|
|
"git stash --keep-index" did not work correctly on paths that have
been removed, which has been fixed.
* tg/stash-keep-index-with-removed-paths:
stash: fix handling removed files with --keep-index
|
|
Adjust the dir-iterator API and apply it to the local clone
optimization codepath.
* mt/dir-iterator-updates:
clone: replace strcmp by fspathcmp
clone: use dir-iterator to avoid explicit dir traversal
clone: extract function from copy_or_link_directory
clone: copy hidden paths at local clone
dir-iterator: add flags parameter to dir_iterator_begin
dir-iterator: refactor state machine model
dir-iterator: use warning_errno when possible
dir-iterator: add tests for dir-iterator API
clone: better handle symlinked files at .git/objects/
clone: test for our behavior on odd objects/* content
|
|
The "git log" command learns to issue a warning when log.mailmap
configuration is not set and --[no-]mailmap option is not used, to
prepare users for future versions of Git that uses the mailmap by
default.
* ac/log-use-mailmap-by-default-transition:
tests: defang pager tests by explicitly disabling the log.mailmap warning
documentation: mention --no-use-mailmap and log.mailmap false setting
log: add warning for unspecified log.mailmap setting
|
|
Many GIT_TEST_* environment variables control various aspects of
how our tests are run, but a few followed "non-empty is true, empty
or unset is false" while others followed the usual "there are a few
ways to spell true, like yes, on, etc., and also ways to spell
false, like no, off, etc." convention.
* ab/test-env:
env--helper: mark a file-local symbol as static
tests: make GIT_TEST_FAIL_PREREQS a boolean
tests: replace test_tristate with "git env--helper"
tests README: re-flow a previously changed paragraph
tests: make GIT_TEST_GETTEXT_POISON a boolean
t6040 test: stop using global "script" variable
config.c: refactor die_bad_number() to not call gettext() early
env--helper: new undocumented builtin wrapping git_env_*()
config tests: simplify include cycle test
|
|
We skipped marking the "rebase" built-in as requiring a .git/ directory
and a worktree only to allow to spawn the scripted version of `git
rebase`.
Now that we no longer have that escape hatch, we can change that to the
canonical form.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Eric Wong
Junio C Hamano
SZEDER Gábor
Jean-Noël Avila
Varun Naik
Jeff King
Matheus Tavares
Johannes Schindelin