| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Various improvements to the codepath that writes out pack bitmaps.
* tb/pack-bitmap: (24 commits)
pack-bitmap-write: better reuse bitmaps
pack-bitmap-write: relax unique revwalk condition
pack-bitmap-write: use existing bitmaps
pack-bitmap: factor out 'add_commit_to_bitmap()'
pack-bitmap: factor out 'bitmap_for_commit()'
pack-bitmap-write: ignore BITMAP_FLAG_REUSE
pack-bitmap-write: build fewer intermediate bitmaps
pack-bitmap.c: check reads more aggressively when loading
pack-bitmap-write: rename children to reverse_edges
t5310: add branch-based checks
commit: implement commit_list_contains()
bitmap: implement bitmap_is_subset()
pack-bitmap-write: fill bitmap with commit history
pack-bitmap-write: pass ownership of intermediate bitmaps
pack-bitmap-write: reimplement bitmap writing
ewah: add bitmap_dup() function
ewah: implement bitmap_or()
ewah: make bitmap growth less aggressive
ewah: factor out bitmap growth
rev-list: die when --test-bitmap detects a mismatch
...
|
|
Hotfix for a topic of this cycle.
* ma/maintenance-crontab-fix:
t7900-maintenance: test for magic markers
gc: fix handling of crontab magic markers
git-maintenance.txt: add missing word
|
|
Fix to a regression introduced during this cycle.
* dl/checkout-p-merge-base:
checkout -p: handle tree arguments correctly again
|
|
"git pack-redandant" when there is only one packfile used to crash,
which has been corrected.
* jx/pack-redundant-on-single-pack:
pack-redundant: fix crash when one packfile in repo
|
|
On `git maintenance start`, we add a few entries to the user's cron
table. We wrap our entries using two magic markers, "# BEGIN GIT
MAINTENANCE SCHEDULE" and "# END GIT MAINTENANCE SCHEDULE". At a later
`git maintenance stop`, we will go through the table and remove these
lines. Or rather, we will remove the "BEGIN" marker, the "END" marker
and everything between them.
Alas, we have a bug in how we detect the "END" marker: we don't. As we
loop through all the lines of the crontab, if we are in the "old
region", i.e., the region we're aiming to remove, we make an early
`continue` and don't get as far as checking for the "END" marker. Thus,
once we've seen our "BEGIN", we remove everything until the end of the
file.
Rewrite the logic for identifying these markers. There are four cases
that are mutually exclusive: The current line starts a region or it ends
it, or it's firmly within the region, or it's outside of it (and should
be printed).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a segmentation fault.
The bug is caused by dereferencing `new_branch_info->commit` when it is
`NULL`, which is the case when the tree-ish argument is actually a tree,
not a commit-ish. This was introduced in 5602b500c3c (builtin/checkout:
fix `git checkout -p HEAD...` bug, 2020-10-07), where we tried to ensure
that the special tree-ish `HEAD...` is handled correctly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ab/unreachable-break:
style: do not "break" in switch() after "return"
|
|
Our users are going to be trained to prepare for future change of
init.defaultBranch configuration variable.
* js/init-defaultbranch-advice:
init: provide useful advice about init.defaultBranch
get_default_branch_name(): prepare for showing some advice
branch -m: allow renaming a yet-unborn branch
init: document `init.defaultBranch` better
|
|
Fix potential server side resource deallocation issues when
responding to a partial clone request.
* tb/partial-clone-filters-fix:
upload-pack.c: don't free allowed_filters util pointers
builtin/clone.c: don't ignore transport_fetch_refs() errors
|
|
Command `git pack-redundant --all` will crash if there is only one
packfile in the repository. This is because, if there is only one
packfile in local_packs, `cmp_local_packs` will do nothing and will
leave `pl->unique_objects` as uninitialized.
Also add testcases for repository with no packfile and one packfile
in t5323.
Reported-by: Daniel C. Klauer <daniel.c.klauer@web.de>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove this unreachable code. It was found by SunCC, it's found by a
non-fatal warning emitted by SunCC. It's one of the things it's more
vehement about than GCC & Clang.
It complains about a lot of other similarly unreachable code, e.g. a
BUG(...) without a "return", and a "return 0" after a long if/else,
both of whom have "return" statements. Those are also genuine
redundancies to a compiler, but arguably make the code a bit easier to
read & less fragile to maintain.
These return/break cases are just unnecessary however, and as seen
here the surrounding code just did a plain "return" without a "break"
already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to introduce a message giving users running `git init` some
advice about `init.defaultBranch`. This will necessarily be done in
`repo_default_branch_name()`.
Not all code paths want to show that advice, though. In particular, the
`git clone` codepath _specifically_ asks for `init_db()` to be quiet,
via the `INIT_DB_QUIET` flag.
In preparation for showing users above-mentioned advice, let's change
the function signature of `get_default_branch_name()` to accept the
parameter `quiet`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In one of the next commits, we would like to give users some advice
regarding the initial branch name, and how to modify it.
To that end, it would be good if `git branch -m <name>` worked in a
freshly initialized repository without any commits. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of non-reentrant localtime() has been removed.
* tb/bugreport-no-localtime:
builtin/bugreport.c: use thread-safe localtime_r()
|
|
"git maintenance run/start/stop" needed to be run in a repository
to hold the lockfile they use, but didn't make sure they are
actually in a repository, which has been corrected.
* rs/maintenance-run-outside-repo:
t7900: fix typo: "test_execpt_success"
maintenance: fix SEGFAULT when no repository
|
|
Code clean-up.
* ma/grep-init-default:
MyFirstObjectWalk: drop `init_walken_defaults()`
grep: copy struct in one fell swoop
grep: use designated initializers for `grep_defaults`
grep: don't set up a "default" repo for grep
|
|
The transport layer was taught to optionally exchange the session
ID assigned by the trace2 subsystem during fetch/push transactions.
* js/trace2-session-id:
receive-pack: log received client session ID
send-pack: advertise session ID in capabilities
upload-pack, serve: log received client session ID
fetch-pack: advertise session ID in capabilities
transport: log received server session ID
serve: advertise session ID in v2 capabilities
receive-pack: advertise session ID in v0 capabilities
upload-pack: advertise session ID in v0 capabilities
trace2: add a public function for getting the SID
docs: new transfer.advertiseSID option
docs: new capability to advertise session IDs
|
|
"git maintenance" command had trouble working in a directory whose
pathname contained an ERE metacharacter like '+'.
* ds/maintenance-part-3:
maintenance: use 'git config --fixed-value'
|
|
Various subcommands of "git config" that takes value_regex
learn the "--literal-value" option to take the value_regex option
as a literal string.
* ds/config-literal-value:
config doc: value-pattern is not necessarily a regexp
config: implement --fixed-value with --get*
config: plumb --fixed-value into config API
config: add --fixed-value option, un-implemented
t1300: add test for --replace-all with value-pattern
t1300: test "set all" mode with value-pattern
config: replace 'value_regex' with 'value_pattern'
config: convert multi_replace to flags
|
|
"git update-ref --stdin" learns to take multiple transactions in a
single session.
* ps/update-ref-multi-transaction:
update-ref: disallow "start" for ongoing transactions
p1400: use `git-update-ref --stdin` to test multiple transactions
update-ref: allow creation of multiple transactions
t1400: avoid touching refs on filesystem
|
|
The on-disk bitmap format has a flag to mark a bitmap to be "reused".
This is a rather curious feature, and works like this:
- a run of pack-objects would decide to mark the last 80% of the
bitmaps it generates with the reuse flag
- the next time we generate bitmaps, we'd see those reuse flags from
the last run, and mark those commits as special:
- we'd be more likely to select those commits to get bitmaps in
the new output
- when generating the bitmap for a selected commit, we'd reuse the
old bitmap as-is (rearranging the bits to match the new pack, of
course)
However, neither of these behaviors particularly makes sense.
Just because a commit happened to be bitmapped last time does not make
it a good candidate for having a bitmap this time. In particular, we may
choose bitmaps based on how recent they are in history, or whether a ref
tip points to them, and those things will change. We're better off
re-considering fresh which commits are good candidates.
Reusing the existing bitmap _is_ a reasonable thing to do to save
computation. But only reusing exact bitmaps is a weak form of this. If
we have an old bitmap for A and now want a new bitmap for its child, we
should be able to compute that only by looking at trees and that are new
to the child. But this code would consider only exact reuse (which is
perhaps why it was eager to select those commits in the first place).
Furthermore, the recent switch to the reverse-edge algorithm for
generating bitmaps dropped this optimization entirely (and yet still
performs better).
So let's do a few cleanups:
- drop the whole "reusing bitmaps" phase of generating bitmaps. It's
not helping anything, and is mostly unused code (or worse, code that
is using CPU but not doing anything useful)
- drop the use of the on-disk reuse flag to select commits to bitmap
- stop setting the on-disk reuse flag in bitmaps we generate (since
nothing respects it anymore)
We will keep a few innards of the reuse code, which will help us
implement a more capable version of the "reuse" optimization:
- simplify rebuild_existing_bitmaps() into a function that only builds
the mapping of bits between the old and new orders, but doesn't
actually convert any bitmaps
- make rebuild_bitmap() public; we'll call it lazily to convert bitmaps
as we traverse (using the mapping created above)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If 'git clone' couldn't execute 'transport_fetch_refs()' (e.g., because
of an error on the remote's side in 'git upload-pack'), then it will
silently ignore it.
Even though this has been the case at least since clone was ported to C
(way back in 8434c2f1af (Build in clone, 2008-04-27)), 'git fetch'
doesn't ignore these and reports any failures it sees.
That suggests that ignoring the return value in 'git clone' is simply an
oversight that should be corrected. That's exactly what this patch does.
(Noticing and fixing this is no coincidence, we'll want it in the next
patch in order to demonstrate a regression in 'git upload-pack' via a
'git clone'.)
There's no additional logging here, but that matches how 'git fetch'
handles the same case. An assumption there is that whichever part of
transport_fetch_refs() fails will complain loudly, so any additional
logging here is redundant.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the logic to deal with a repack operation that ended up
creating the same packfile.
* tb/repack-simplify:
builtin/repack.c: don't move existing packs out of the way
builtin/repack.c: keep track of what pack-objects wrote
repack: make "exts" array available outside cmd_repack()
|
|
"git pull --rebase --recurse-submodules" checked for local changes
in a wrong range and failed to run correctly when it should.
* pb/pull-rebase-recurse-submodules:
pull: check for local submodule modifications with the right range
t5572: describe '--rebase' tests a little more
t5572: add notes on a peculiar test
pull --rebase: compute rebase arguments in separate function
|
|
To generate its filename, the 'git bugreport' builtin asks the system
for the current time with 'localtime()'. Since this uses a shared
buffer, it is not thread-safe.
Even though 'git bugreport' is not multi-threaded, using localtime() can
trigger some static analysis tools to complain, and a quick
$ git grep -oh 'localtime\(_.\)\?' -- **/*.c | sort | uniq -c
shows that the only usage of the thread-unsafe 'localtime' is in a piece
of documentation.
So, convert this instance to use the thread-safe version for
consistency, and to appease some analysis tools.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Multiple "credential-store" backends can race to lock the same
file, causing everybody else but one to fail---reattempt locking
with some timeout to reduce the rate of the failure.
* sa/credential-store-timeout:
crendential-store: use timeout when locking file
|
|
Error message fix.
* km/stash-error-message-fix:
stash: add missing space to an error message
|
|
Fix formulation of an error message with two placeholders in "git
worktree add" subcommand.
* mt/worktree-error-message-fix:
worktree: fix order of arguments in error message
|
|
Fix an option name in "gc" documentation.
* ab/gc-keep-base-option:
gc: rename keep_base_pack variable for --keep-largest-pack
gc docs: change --keep-base-pack to --keep-largest-pack
|
|
UI improvement.
* js/pull-rebase-use-advise:
pull: colorize the hint about setting `pull.rebase`
|
|
The "git maintenance run" and "git maintenance start/stop" commands
holds a file-based lock at the .git/maintenance.lock and
.git/schedule.lock respectively. These locks are used to ensure only
one maintenance process is executed at the time as both operations
involves writing data into the git repository.
The path to the lock file is built using
"the_repository->objects->odb->path" that results in SEGFAULT when we
have no repository available as "the_repository->objects->odb" is
set to NULL.
Let's teach maintenance command to use RUN_SETUP option that will
provide the validation and fail when running outside of a repository.
Hence fixing the SEGFAULT for all three operations and making the
behaviour consistent across all subcommands.
Setting the RUN_SETUP also provides the same protection for all
subcommands given that the "register" and "unregister" also requires to
be executed inside a repository.
Furthermore let's remove the local validation implemented by the
"register" and "unregister" as this will not be required anymore with
the new option.
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix broken sorting of maintenance tasks.
* rs/gc-sort-func-cast-fix:
gc: fix cast in compare_tasks_by_selection()
|
|
The code was not prepared to deal with pack .idx file that is
larger than 4GB.
* jk/4gb-idx:
packfile: detect overflow in .idx file size checks
block-sha1: take a size_t length parameter
fsck: correctly compute checksums on idx files larger than 4GB
use size_t to store pack .idx byte offsets
compute pack .idx byte offsets using size_t
|
|
The exchange between receive-pack and proc-receive hook did not
carefully check for errors.
* jx/t5411-flake-fix:
receive-pack: use default version 0 for proc-receive
receive-pack: gently write messages to proc-receive
t5411: new helper filter_out_user_friendly_and_stable_output
|
|
When a repository's leading directories contain regex metacharacters,
the config calls for 'git maintenance register' and 'git maintenance
unregister' are not careful enough. Use the new --fixed-value option
to direct the config machinery to use exact string matches. This is a
more robust option than escaping these arguments in a piecemeal fashion.
For the test, require that we are not running on Windows since the '+'
and '*' characters are not allowed on that filesystem.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config builtin does its own regex matching of values for the --get,
--get-all, and --get-regexp modes. Plumb the existing 'flags' parameter
to the get_value() method so we can initialize the value-pattern argument
as a fixed string instead of a regex pattern.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git_config_set_multivar_in_file_gently() and related methods now
take a 'flags' bitfield, so add a new bit representing the --fixed-value
option from 'git config'. This alters the purpose of the value_pattern
parameter to be an exact string match. This requires some initialization
changes in git_config_set_multivar_in_file_gently() and a new strcmp()
call in the matches() method.
The new CONFIG_FLAGS_FIXED_VALUE flag is initialized in builtin/config.c
based on the --fixed-value option, and that needs to be updated in
several callers.
This patch only affects some of the modes of 'git config', and the rest
will be completed in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git config' builtin takes a 'value-pattern' parameter for several
actions. This can cause confusion when expecting exact value matches
instead of regex matches, especially when the input string contains
metacharacters. While callers can escape the patterns themselves, it
would be more friendly to allow an argument to disable the pattern
matching in favor of an exact string match.
Add a new '--fixed-value' option that does not currently change the
behavior. The implementation will be filled in by later changes for
each appropriate action. For now, check and test that --fixed-value
will abort the command when included with an incompatible action or
without a 'value-pattern' argument.
The name '--fixed-value' was chosen over something simpler like
'--fixed' because some commands allow regular expressions on the
key in addition to the value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'value_regex' argument in the 'git config' builtin is poorly named,
especially related to an upcoming change that allows exact string
matches instead of ERE pattern matches.
Perform a mostly mechanical change of every instance of 'value_regex' to
'value_pattern' in the codebase. This is only critical for documentation
and error messages, but it is best to be consistent inside the codebase,
too.
For documentation, use 'value-pattern' which is better punctuation. This
affects Documentation/git-config.txt and the usage in builtin/config.c,
which was already mixed between 'value_regex' and 'value-regex'.
I gave some thought to leaving the value_regex variables inside config.c
that are regex_t pointers. However, it is probably best to keep the name
consistent with the rest of the variables.
This does not update the translations inside the po/ directory, as that
creates conflicts with ongoing work. The input strings should
automatically update through automation, and a few of the output strings
currently use "[value_regex]" directly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will extend the flexibility of the config API. Before doing so, let's
take an existing 'int multi_replace' parameter and replace it with a new
'unsigned flags' parameter that can take multiple options as a bit field.
Update all callers that specified multi_replace to now specify the
CONFIG_FLAGS_MULTI_REPLACE flag. To add more clarity, extend the
documentation of git_config_set_multivar_in_file() including a clear
labeling of its arguments. Other config API methods in config.h require
only a change of the final parameter from 'int' to 'unsigned'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When holding the lock for rewriting the credential file, use a timeout
to avoid race conditions when the credentials file needs to be updated
in parallel.
An example would be doing `fetch --all` on a repository with several
remotes that need credentials, using parallel fetching.
The timeout can be configured using "credentialStore.lockTimeoutMS",
defaulting to 1 second.
Signed-off-by: Simão Afonso <simao.afonso@powertools-tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Restore a space that was lost in 8a0fc8d19d (stash: convert apply to
builtin, 2019-02-25).
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
|
|
"git rev-parse" learned the "--end-of-options" to help scripts to
safely take a parameter that is supposed to be a revision, e.g.
"git rev-parse --verify -q --end-of-options $rev".
* jk/rev-parse-end-of-options:
rev-parse: handle --end-of-options
rev-parse: put all options under the "-" check
rev-parse: don't accept options after dashdash
|
|
The maximum length of output filenames "git format-patch" creates
has become configurable (used to be capped at 64).
* jc/format-patch-name-max:
format-patch: make output filename configurable
|
|
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git worktree add` (without --force) errors out when given a path
that is already registered as a worktree and the path is missing on
disk. But the `cmd` and `path` strings are switched on the error
message. Let's fix that.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in an earlier change the keep_base_pack variable name is a
relic from an earlier on-list version of ae4e89e549 ("gc: add
--keep-largest-pack option", 2018-04-15) before it was renamed to
--keep-largest-pack.
Let's change the variable name to avoid that confusion, it's easier to
read the code if there's a 1=1 mapping between the variable name and
option name.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In d18c950a69f (pull: warn if the user didn't say whether to rebase or
to merge, 2020-03-09), a new hint was introduced to encourage users to
make a conscious decision about whether they want their pull to merge or
to rebase by configuring the `pull.rebase` setting.
This warning was clearly intended to advise users, but as pointed out in
https://lore.kernel.org/git/87ima2rdsm.fsf%40evledraar.gmail.com, it
uses `warning()` instead of `advise()`.
One consequence is that the advice is not colorized in the same manner
as other, similar messages. So let's use `advise()` instead.
Pointed-out-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Martin Ågren
Johannes Schindelin
Jiang Xin
Ævar Arnfjörð Bjarmason
Jeff King
Taylor Blau
Rafael Silva
Derrick Stolee
Simão Afonso
Kyle Meyer
Matheus Tavares