| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Receive-pack feeds its input to either index-pack or
unpack-objects, which will happily accept as many bytes as
a sender is willing to provide. Let's allow an arbitrary
cutoff point where we will stop writing bytes to disk.
Cleaning up what has already been written to disk is a
related problem that is not addressed by this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When receiving a pack-file, it can be useful to abort the
`git unpack-objects`, if the pack-file is too big.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When receiving a pack-file, it can be useful to abort the
`git index-pack`, if the pack-file is too big.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout --detach <branch>" used to give the same advice
message as that is issued when "git checkout <tag>" (or anything
that is not a branch name) is given, but asking with "--detach" is
an explicit enough sign that the user knows what is going on. The
advice message has been squelched in this case.
* sb/checkout-explit-detach-no-advice:
checkout: do not mention detach advice for explicit --detach option
|
|
Small code and comment clean-up.
* jk/tighten-alloc:
receive-pack: use FLEX_ALLOC_MEM in queue_command()
correct FLEXPTR_* example in comment
|
|
When a user asked for a detached HEAD specifically with `--detach`,
we do not need to give advice on what a detached HEAD state entails as
we can assume they know what they're getting into as they asked for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the macro FLEX_ALLOC_MEM instead of open-coding it. This shortens
and simplifies the code a bit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git rebase" tries to compare set of changes on the updated
upstream and our own branch, it computes patch-id for all of these
changes and attempts to find matches. This has been optimized by
lazily computing the full patch-id (which is expensive) to be
compared only for changes that touch the same set of paths.
* kw/patch-ids-optim:
rebase: avoid computing unnecessary patch IDs
patch-ids: add flag to create the diff patch id using header only data
patch-ids: replace the seen indicator with a commit pointer
patch-ids: stop using a hand-rolled hashmap implementation
|
|
"git mv dir non-existing-dir/" did not work in some environments
the same way as existing mainstream platforms. The code now moves
"dir" to "non-existing-dir", without relying on rename("A", "B/")
that strips the trailing slash of '/'.
* js/mv-dir-to-new-directory:
git mv: do not keep slash in `git mv dir non-existing-dir/`
|
|
A small code clean-up.
* rs/use-strbuf-add-unique-abbrev:
use strbuf_add_unique_abbrev() for adding short hashes
|
|
A small code clean-up.
* rs/merge-add-strategies-simplification:
merge: use string_list_split() in add_strategies()
|
|
A small code clean-up.
* rs/child-process-init:
use CHILD_PROCESS_INIT to initialize automatic variables
|
|
Fix-up to an error codepath in a topic already in 'master'.
* sb/submodule-clone-retry:
submodule--helper: use parallel processor correctly
|
|
Not-so-recent rewrite of "git am" that started making internal
calls into the commit machinery had an unintended regression, in
that no matter how many seconds it took to apply many patches, the
resulting committer timestamp for the resulting commits were all
the same.
* jk/reset-ident-time-per-commit:
am: reset cached ident date for each patch
|
|
The `rebase` family of Git commands avoid applying patches that were
already integrated upstream. They do that by using the revision walking
option that computes the patch IDs of the two sides of the rebase
(local-only patches vs upstream-only ones) and skipping those local
patches whose patch ID matches one of the upstream ones.
In many cases, this causes unnecessary churn, as already the set of
paths touched by a given commit would suffice to determine that an
upstream patch has no local equivalent.
This hurts performance in particular when there are a lot of upstream
patches, and/or large ones.
Therefore, let's introduce the concept of a "diff-header-only" patch ID,
compare those first, and only evaluate the "full" patch ID lazily.
Please note that in contrast to the "full" patch IDs, those
"diff-header-only" patch IDs are prone to collide with one another, as
adjacent commits frequently touch the very same files. Hence we now
have to be careful to allow multiple hash entries with the same hash.
We accomplish that by using the hashmap_add() function that does not even
test for hash collisions. This also allows us to evaluate the full patch ID
lazily, i.e. only when we found commits with matching diff-header-only
patch IDs.
We add a performance test that demonstrates ~1-6% improvement. In
practice this will depend on various factors such as how many upstream
changes and how big those changes are along with whether file system
caches are cold or warm. As Git's test suite has no way of catching
performance regressions, we also add a regression test that verifies
that the full patch ID computation is skipped when the diff-header-only
computation suffices.
Signed-off-by: Kevin Willford <kcwillford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few updates to "git submodule update".
Use of "| wc -l" break with BSD variant of 'wc'.
* sb/submodule-update-dot-branch:
t7406: fix breakage on OSX
submodule update: allow '.' for branch value
submodule--helper: add remote-branch helper
submodule-config: keep configured branch around
submodule--helper: fix usage string for relative-path
submodule update: narrow scope of local variable
submodule update: respect depth in subsequent fetches
t7406: future proof tests with hard coded depth
|
|
"git am -3" calls "git merge-recursive" when it needs to fall back
to a three-way merge; this call has been turned into an internal
subroutine call instead of spawning a separate subprocess.
* js/am-3-merge-recursive-direct:
merge-recursive: flush output buffer even when erroring out
merge_trees(): ensure that the callers release output buffer
merge-recursive: offer an option to retain the output in 'obuf'
merge-recursive: write the commit title in one go
merge-recursive: flush output buffer before printing error messages
am -3: use merge_recursive() directly again
merge-recursive: switch to returning errors instead of dying
merge-recursive: handle return values indicating errors
merge-recursive: allow write_tree_from_memory() to error out
merge-recursive: avoid returning a wholesale struct
merge_recursive: abort properly upon errors
prepare the builtins for a libified merge_recursive()
merge-recursive: clarify code in was_tracked()
die(_("BUG")): avoid translating bug messages
die("bug"): report bugs consistently
t5520: verify that `pull --rebase` shows the helpful advice when failing
|
|
* js/commit-slab-decl-fix:
commit-slab.h: avoid duplicated global static variables
config.c: avoid duplicated global static variables
|
|
"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.
* jt/format-patch-from-config:
format-patch: format.from gives the default for --from
|
|
Not-so-recent rewrite of "git am" that started making internal
calls into the commit machinery had an unintended regression, in
that no matter how many seconds it took to apply many patches, the
resulting committer timestamp for the resulting commits were all
the same.
* jk/reset-ident-time-per-commit:
am: reset cached ident date for each patch
|
|
* rs/use-strbuf-addstr:
use strbuf_addstr() instead of strbuf_addf() with "%s"
use strbuf_addstr() for adding constant strings to a strbuf
|
|
"git commit --help" said "--no-verify" is only about skipping the
pre-commit hook, and failed to say that it also skipped the
commit-msg hook.
* os/no-verify-skips-commit-msg-too:
commit: describe that --no-verify skips the commit-msg hook in the help text
|
|
The use of strbuf in "git rm" to build filename to remove was a bit
suboptimal, which has been fixed.
* rs/rm-strbuf-optim:
rm: reuse strbuf for all remove_dir_recursively() calls
|
|
Users of the parse_options_concat() API function need to allocate
extra slots in advance and fill them with OPT_END() when they want
to decide the set of supported options dynamically, which makes the
code error-prone and hard to read. This has been corrected by tweaking
the API to allocate and return a new copy of "struct option" array.
* jk/parse-options-concat:
parse_options: allocate a new array when concatenating
|
|
When developing another patch series I had a temporary state in
which git-clone would segfault, when the call was prepared in
prepare_to_clone_next_submodule. This lead to the call failing,
i.e. in `update_clone_task_finished` the task was scheduled to be
tried again. The second call to prepare_to_clone_next_submodule
would return 0, as the segfaulted clone did create the .git file
already, such that was not considered to need to be cloned again. I
was seeing the "BUG: ce was a submodule before?\n" message, which
was the correct behavior at the time as my local code was
buggy. When trying to debug this failure, I tried to use printing
messages into the strbuf that is passed around, but these messages
were never printed as the die(..) doesn't flush the `err` strbuf.
When implementing the die() in 665b35ecc (2016-06-09, "submodule--helper:
initial clone learns retry logic"), I considered this condition to be
a severe condition, which should lead to an immediate abort as we do not
trust ourselves any more. However the queued messages in `err` are valuable
so let's not toss them out by immediately dying, but a graceful return.
Another thing to note: The error message itself was misleading. A return
value of 0 doesn't indicate the passed in `ce` is not a submodule any more,
but just that we do not consider cloning it any more.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Repeating the definition of a static variable seems to be valid in C.
Nevertheless, it is bad style because it can cause confusion, definitely
when it becomes necessary to change the type.
d64ec16 (git config: reorganize to use parseopt, 2009-02-21) added two
static variables near the top of the file config.c without removing the
definitions of the two variables that occurs later in the file.
The two variables were needed earlier in the file in the newly
introduced parseopt structure. These references were removed later in
d0e08d6 (config: fix parsing of "git config --get-color some.key -1",
2014-11-20).
Remove the redundant, younger, definitions near the top of the file and
keep the original definitions that occur later.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A small memory leak in the command line parsing of "git blame"
has been plugged.
* jk/parseopt-string-list:
blame: drop strdup of string literal
|
|
* rs/use-strbuf-addstr:
use strbuf_addstr() instead of strbuf_addf() with "%s"
use strbuf_addstr() for adding constant strings to a strbuf
|
|
"git pack-objects" has a few options that tell it not to pack
objects found in certain packfiles, which require it to scan .idx
files of all available packs. The codepaths involved in these
operations have been optimized for a common case of not having any
non-local pack and/or any .kept pack.
* jk/pack-objects-optim:
pack-objects: compute local/ignore_pack_keep early
pack-objects: break out of want_object loop early
find_pack_entry: replace last_found_pack with MRU cache
add generic most-recently-used list
sha1_file: drop free_pack_by_name
t/perf: add tests for many-pack scenarios
|
|
More i18n marking.
* va/i18n:
i18n: config: unfold error messages marked for translation
i18n: notes: mark comment for translation
|
|
The reflog output format is documented better, and a new format
--date=unix to report the seconds-since-epoch (without timezone)
has been added.
* jk/reflog-date:
date: clarify --date=raw description
date: add "unix" format
date: document and test "raw-local" mode
doc/pretty-formats: explain shortening of %gd
doc/pretty-formats: describe index/time formats for %gd
doc/rev-list-options: explain "-g" output formats
doc/rev-list-options: clarify "commit@{Nth}" for "-g" option
|
|
Code clean-up.
* pb/commit-editmsg-path:
builtin/commit.c: memoize git-path for COMMIT_EDITMSG
|
|
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
|
|
"git blame file" allowed the lineage of lines in the uncommitted,
unadded contents of "file" to be inspected, but it refused when
"file" did not appear in the current commit. When "file" was
created by renaming an existing file (but the change has not been
committed), this restriction was unnecessarily tight.
* mh/blame-worktree:
t/t8003-blame-corner-cases.sh: Use here documents
blame: allow to blame paths freshly added to the index
|
|
When calling `rename("dir", "non-existing-dir/")` on Linux, it silently
succeeds, stripping the trailing slash of the second argument.
This is all good and dandy but this behavior disagrees with the specs at
http://pubs.opengroup.org/onlinepubs/9699919799/functions/rename.html
that state clearly regarding the 2nd parameter (called `new`):
If the `new` argument does not resolve to an existing directory
entry for a file of type directory and the `new` argument
contains at least one non- <slash> character and ends with one
or more trailing <slash> characters after all symbolic links
have been processed, `rename()` shall fail.
Of course, we would like `git mv dir non-existing-dir/` to succeed (and
rename the directory "dir" to "non-existing-dir"). Let's be extra
careful to remove the trailing slash in that case.
This lets t7001-mv.sh pass in Bash on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Call string_list_split() for cutting a space separated list into pieces
instead of reimplementing it based on struct strategy. The attr member
of struct strategy was not used split_merge_strategies(); it was a pure
string operation. Also be nice and clean up once we're done splitting;
the old code didn't bother freeing any of the allocated memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Initialize struct child_process variables already when they're defined.
That's shorter and saves a function call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Call strbuf_addstr() for adding a simple string to a strbuf instead of
using the heavier strbuf_addf(). This is shorter and documents the
intent more clearly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier tweak to make "submodule update" retry a failing clone
of submodules was buggy and caused segfault, which has been fixed.
* sb/submodule-clone-retry:
submodule-helper: fix indexing in clone retry error reporting path
git-submodule: forward exit code of git-submodule--helper more faithfully
|
|
Gerrit has a "superproject subscription" feature[1], that triggers a
commit in a superproject that is subscribed to its submodules.
Conceptually this Gerrit feature can be done on the client side with
Git via (except for raciness, error handling etc):
while [ true ]; do
git -C <superproject> submodule update --remote --force
git -C <superproject> commit -a -m "Update submodules"
git -C <superproject> push
done
for each branch in the superproject. To ease the configuration in Gerrit
a special value of "." has been introduced for the submodule.<name>.branch
to mean the same branch as the superproject[2], such that you can create a
new branch on both superproject and the submodule and this feature
continues to work on that new branch.
Now we find projects in the wild with such a .gitmodules file.
The .gitmodules used in these Gerrit projects do not conform
to Gits understanding of how .gitmodules should look like.
This teaches Git to deal gracefully with this syntax as well.
The redefinition of "." does no harm to existing projects unaware of
this change, as "." is an invalid branch name in Git, so we do not
expect such projects to exist.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a later patch we want to enhance the logic for the branch selection.
Rewrite the current logic to be in C, so we can directly use C when
we enhance the logic.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" and "git clone" learned to give better progress meters
to the end user who is waiting on the terminal.
* jk/push-progress:
receive-pack: send keepalives during quiet periods
receive-pack: turn on connectivity progress
receive-pack: relay connectivity errors to sideband
receive-pack: turn on index-pack resolving progress
index-pack: add flag for showing delta-resolution progress
clone: use a real progress meter for connectivity check
check_connected: add progress flag
check_connected: relay errors to alternate descriptor
check_everything_connected: use a struct with named options
check_everything_connected: convert to argv_array
rev-list: add optional progress reporting
check_everything_connected: always pass --quiet to rev-list
|
|
Users of the parse_options_concat() API function need to allocate
extra slots in advance and fill them with OPT_END() when they want
to decide the set of supported options dynamically, which makes the
code error-prone and hard to read. This has been corrected by tweaking
the API to allocate and return a new copy of "struct option" array.
* jk/parse-options-concat:
parse_options: allocate a new array when concatenating
|
|
"git push" learned to accept and pass extra options to the
receiving end so that hooks can read and react to them.
* sb/push-options:
add a test for push options
push: accept push options
receive-pack: implement advertising and receiving push options
push options: {pre,post}-receive hook learns about push options
|
|
"git commit --help" said "--no-verify" is only about skipping the
pre-commit hook, and failed to say that it also skipped the
commit-msg hook.
* os/no-verify-skips-commit-msg-too:
commit: describe that --no-verify skips the commit-msg hook in the help text
|
|
This strdup was added as part of 58dbfa2 (blame: accept
multiple -L ranges, 2013-08-06) to be consistent with
parse_opt_string_list(), which appends to the same list.
But as of 7a7a517 (parse_opt_string_list: stop allocating
new strings, 2016-06-13), we should stop using strdup (to
match parse_opt_string_list, and for all the reasons
described in that commit; namely that it does nothing useful
and causes us to leak the memory).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we compute the date to go in author/committer lines of
commits, or tagger lines of tags, we get the current date
once and then cache it for the rest of the program. This is
a good thing in some cases, like "git commit", because it
means we do not racily assign different times to the
author/committer fields of a single commit object.
But as more programs start to make many commits in a single
process (e.g., the recently builtin "git am"), it means that
you'll get long strings of commits with identical committer
timestamps (whereas before, we invoked "git commit" many
times and got true timestamps).
This patch addresses it by letting callers reset the cached
time, which means they'll get a fresh time on their next
call to git_committer_info() or git_author_info(). The first
caller to do so is "git am", which resets the time for each
patch it applies.
It would be nice if we could just do this automatically
before filling in the ident fields of commit and tag
objects. Unfortunately, it's hard to know where a particular
logical operation begins and ends.
For instance, if commit_tree_extended() were to call
reset_ident_date() before getting the committer/author
ident, that doesn't quite work; sometimes the author info is
passed in to us as a parameter, and it may or may not have
come from a previous call to ident_default_date(). So in
those cases, we lose the property that the committer and the
author timestamp always match.
You could similarly put a date-reset at the end of
commit_tree_extended(). That actually works in the current
code base, but it's fragile. It makes the assumption that
after commit_tree_extended() finishes, the caller has no
other operations that would logically want to fall into the
same timestamp.
So instead we provide the tool to easily do the reset, and
let the high-level callers use it to annotate their own
logical operations.
There's no automated test, because it would be inherently
racy (it depends on whether the program takes multiple
seconds to run). But you can see the effect with something
like:
# make a fake 100-patch series
top=$(git rev-parse HEAD)
bottom=$(git rev-list --first-parent -100 HEAD | tail -n 1)
git log --format=email --reverse --first-parent \
--binary -m -p $bottom..$top >patch
# now apply it; this presumably takes multiple seconds
git checkout --detach $bottom
git am <patch
# now count the number of distinct committer times;
# prior to this patch, there would only be one, but
# now we'd typically see several.
git log --format=%ct $bottom.. | sort -u
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Internally we call the underscore version of relative_path, but externally
we present an API with no underscores.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls.
In http-push.c it becomes easier to see what's going on without having
to verfiy that the definition of PROPFIND_ALL_REQUEST doesn't contain
any format specifiers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Christian Couder
Junio C Hamano
Stefan Beller
René Scharfe
Kevin Willford
Johannes Sixt
Johannes Schindelin
Eric Sunshine