| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When "cat-file --batch-all-objects" iterates over each object, it knows
where to find each one. But when we look up details of the object, we
don't use that information at all.
This patch teaches it to use the pack/offset pair when we're iterating
over objects in a pack. This yields a measurable speed improvement
(timings on a fully packed clone of linux.git):
Benchmark #1: ./git.old cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
Time (mean ± σ): 8.128 s ± 0.118 s [User: 7.968 s, System: 0.156 s]
Range (min … max): 8.007 s … 8.301 s 10 runs
Benchmark #2: ./git.new cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
Time (mean ± σ): 4.294 s ± 0.064 s [User: 4.167 s, System: 0.125 s]
Range (min … max): 4.227 s … 4.457 s 10 runs
Summary
'./git.new cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"' ran
1.89 ± 0.04 times faster than './git.old cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
The implementation is pretty simple: we just call packed_object_info()
instead of oid_object_info_extended() when we can. Most of the changes
are just plumbing the pack/offset pair through the callstack. There is
one subtlety: replace lookups are not handled by packed_object_info().
But since those are disabled for --batch-all-objects, and since we'll
only have pack info when that option is in effect, we don't have to
worry about that.
There are a few limitations to this optimization which we could address
with further work:
- I didn't bother recording when we found an object loose. Technically
this could save us doing a fruitless lookup in the pack index. But
opening and mmap-ing a loose object is so expensive in the first
place that this doesn't matter much. And if your repository is large
enough to care about per-object performance, most objects are going
to be packed anyway.
- This works only in --unordered mode. For the sorted mode, we'd have
to record the pack/offset pair as part of our oid-collection. That's
more code, plus at least 16 extra bytes of heap per object. It would
probably still be a net win in runtime, but we'd need to measure.
- For --batch, this still helps us with getting the object metadata,
but we still do a from-scratch lookup for the object contents. This
probably doesn't matter that much, because the lookup cost will be
much smaller relative to the cost of actually unpacking and printing
the objects.
For small objects, we could probably swap out read_object_file() for
using packed_object_info() with a "object_info.contentp" to get the
contents. But we'd still need to deal with streaming for larger
objects. A better path forward here is to teach the initial
oid_object_info_extended() / packed_object_info() calls to retrieve
the contents of smaller objects while they are already being
accessed. That would save the extra lookup entirely. But it's a
non-trivial feature to add to the object_info code, so I left it for
now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we originally added --batch-all-objects, it stuffed everything into
an oid_array(), and then iterated over that array with a callback to
write the actual output.
When we later added --unordered, that code path writes immediately as we
discover each object, but just calls the same batch_object_cb() as our
entry point to the writing code. That callback has a narrow interface;
it only receives the oid, but we know much more about each object in the
unordered write (which we'll make use of in the next patch). So let's
just call batch_object_write() directly. The callback wasn't saving us
much effort.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we're enumerating all objects in the object database, it doesn't
make sense to respect refs/replace. The point of this option is to
enumerate all of the objects in the database at a low level. By
definition we'd already show the replacement object's contents (under
its real oid), and showing those contents under another oid is almost
certainly working against what the user is trying to do.
Note that you could make the same argument for something like:
git show-index <foo.idx |
awk '{print $2}' |
git cat-file --batch
but there we can't know in cat-file exactly what the user intended,
because we don't know the source of the input. They could be trying to
do low-level debugging, or they could be doing something more high-level
(e.g., imagine a porcelain built around cat-file for its object
accesses). So in those cases, we'll have to rely on the user specifying
"git --no-replace-objects" to tell us what to do.
One _could_ make an argument that "cat-file --batch" is sufficiently
low-level plumbing that it should not respect replace-objects at all
(and the caller should do any replacement if they want it). But we have
been doing so for some time. The history is a little tangled:
- looking back as far as v1.6.6, we would not respect replace refs for
--batch-check, but would for --batch (because the former used
sha1_object_info(), and the replace mechanism only affected actual
object reads)
- this discrepancy was made even weirder by 98e2092b50 (cat-file:
teach --batch to stream blob objects, 2013-07-10), where we always
output the header using the --batch-check code, and then printed the
object separately. This could lead to "cat-file --batch" dying (when
it notices the size or type changed for a non-blob object) or even
producing bogus output (in streaming mode, we didn't notice that we
wrote the wrong number of bytes).
- that persisted until 1f7117ef7a (sha1_file: perform object
replacement in sha1_object_info_extended(), 2013-12-11), which then
respected replace refs for both forms.
So it has worked reliably this way for over 7 years, and we should make
sure it continues to do so. That could also be an argument that
--batch-all-objects should not change behavior (which this patch is
doing), but I really consider the current behavior to be an unintended
bug. It's a side effect of how the code is implemented (feeding the oids
back into oid_object_info() rather than looking at what we found while
reading the loose and packed object storage).
The implementation is straight-forward: we just disable the global
read_replace_refs flag when we're in --batch-all-objects mode. It would
perhaps be a little cleaner to change the flag we pass to
oid_object_info_extended(), but that's not enough. We also read objects
via read_object_file() and stream_blob_to_fd(). The former could switch
to its _extended() form, but the streaming code has no mechanism for
disabling replace refs. Setting the global flag works, and as a bonus,
it's impossible to have any "oops, we're sometimes replacing the object
and sometimes not" bugs in the output (like the ones caused by
98e2092b50 above).
The tests here cover the regular-input and --batch-all-objects cases,
for both --batch-check and --batch. There is a test in t6050 that covers
the regular-input case with --batch already, but this new one goes much
further in actually verifying the output (plus covering --batch-check
explicitly). This is perhaps a little overkill and the tests would be
simpler just covering --batch-check, but I wanted to make sure we're
checking that --batch output is consistent between the header and the
content. The global-flag technique used here makes that easy to get
right, but this is future-proofing us against regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification.
* rs/use-fspathhash:
use fspathhash() everywhere
|
|
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
|
|
"git checkout" and "git commit" learn to work without unnecessarily
expanding sparse indexes.
* ds/commit-and-checkout-with-sparse-index:
unpack-trees: resolve sparse-directory/file conflicts
t1092: document bad 'git checkout' behavior
checkout: stop expanding sparse indexes
sparse-index: recompute cache-tree
commit: integrate with sparse-index
p2000: compress repo names
p2000: add 'git checkout -' test and decrease depth
|
|
Leak plugging.
* ah/plugleaks:
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
ref-filter: also free head for ATOM_HEAD to avoid leak
diffcore-rename: move old_dir/new_dir definition to plug leak
builtin/for-each-repo: remove unnecessary argv copy to plug leak
builtin/submodule--helper: release unused strbuf to avoid leak
environment: move strbuf into block to plug leak
fmt-merge-msg: free newly allocated temporary strings when done
|
|
Rewrite of "git submodule" in C continues.
* ar/submodule-add:
submodule: drop unused sm_name parameter from show_fetch_remotes()
submodule--helper: introduce add-clone subcommand
submodule--helper: refactor module_clone()
submodule: prefix die messages with 'fatal'
t7400: test failure to add submodule in tracked path
|
|
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduced the function fspathhash() for calculating path hashes while
respecting the configuration option core.ignorecase. Call it instead of
open-coding it; the resulting code is shorter and less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code that gives an error message in "git multi-pack-index" when
no subcommand is given tried to print a NULL pointer as a strong,
which has been corrected.
* tb/reverse-midx:
multi-pack-index: fix potential segfault without sub-command
|
|
"git status" codepath learned to work with sparsely populated index
without hydrating it fully.
* ds/status-with-sparse-index:
t1092: document bad sparse-checkout behavior
fsmonitor: integrate with sparse index
wt-status: expand added sparse directory entries
status: use sparse-index throughout
status: skip sparse-checkout percentage with sparse-index
diff-lib: handle index diffs with sparse dirs
dir.c: accept a directory as part of cone-mode patterns
unpack-trees: unpack sparse directory entries
unpack-trees: rename unpack_nondirectories()
unpack-trees: compare sparse directories correctly
unpack-trees: preserve cache_bottom
t1092: add tests for status/add and sparse files
t1092: expand repository data shape
t1092: replace incorrect 'echo' with 'cat'
sparse-index: include EXTENDED flag when expanding
sparse-index: skip indexes with unmerged entries
|
|
"git diff --merge-base" documentation has been updated.
* dl/diff-merge-base:
git-diff: fix missing --merge-base docs
|
|
Many "printf"-like helper functions we have have been annotated
with __attribute__() to catch placeholder/parameter mismatches.
* ab/attribute-format:
advice.h: add missing __attribute__((format)) & fix usage
*.h: add a few missing __attribute__((format))
*.c static functions: add missing __attribute__((format))
sequencer.c: move static function to avoid forward decl
*.c static functions: don't forward-declare __attribute__
|
|
Optimize "git log" for cases where we wasted cycles to load ref
decoration data that may not be needed.
* jk/log-decorate-optim:
load_ref_decorations(): fix decoration with tags
add_ref_decoration(): rename s/type/deco_type/
load_ref_decorations(): avoid parsing non-tag objects
object.h: add lookup_object_by_type() function
object.h: expand docstring for lookup_unknown_object()
log: avoid loading decorations for userformats that don't need it
pretty.h: update and expand docstring for userformat_find_requirements()
|
|
"git worktree add --lock" learned to record why the worktree is
locked with a custom message.
* sm/worktree-add-lock:
worktree: teach `add` to accept --reason <string> with --lock
worktree: mark lock strings with `_()` for translation
t2400: clean up '"add" worktree with lock' test
|
|
"git commit --allow-empty-message" won't abort the operation upon
an empty message, but the hint shown in the editor said otherwise.
* hj/commit-allow-empty-message:
commit: remove irrelavent prompt on `--allow-empty-message`
commit: reorganise commit hint strings
|
|
- cmd_rebase populates rebase_options.strategy with newly allocated
strings, hence we need to free those strings at the end of cmd_rebase
to avoid a leak.
- In some cases: get_replay_opts() is called, which prepares replay_opts
using data from rebase_options. We used to simply copy the pointer
from rebase_options.strategy, however that would now result in a
double-free because sequencer_remove_state() is eventually used to
free replay_opts.strategy. To avoid this we xstrdup() strategy when
adding it to replay_opts.
The original leak happens because we always populate
rebase_options.strategy, but we don't always enter the path that calls
get_replay_opts() and later sequencer_remove_state() - in other words
we'd always allocate a new string into rebase_options.strategy but
only sometimes did we free it. We now make sure that rebase_options
and replay_opts both own their own copies of strategy, and each copy
is free'd independently.
This was first seen when running t0021 with LSAN, but t2012 helped catch
the fact that we can't just free(options.strategy) at the end of
cmd_rebase (as that can cause a double-free). LSAN output from t0021:
LSAN output from t0021:
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa71eb8 in xstrdup wrapper.c:29:14
#2 0x61b1cc in cmd_rebase builtin/rebase.c:1779:22
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6b3fad in main common-main.c:52:11
#8 0x7f267b512349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 4 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge_name() calls dwim_ref(), which allocates a new string into
found_ref. Therefore add a free() to avoid leaking found_ref.
LSAN output from t0021:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa8beb8 in xstrdup wrapper.c:29:14
#2 0x954054 in expand_ref refs.c:671:12
#3 0x953cb6 in repo_dwim_ref refs.c:644:22
#4 0x5d3759 in dwim_ref refs.h:162:9
#5 0x5d3759 in merge_name builtin/merge.c:517:6
#6 0x5d3759 in collect_parents builtin/merge.c:1214:5
#7 0x5cf60d in cmd_merge builtin/merge.c:1458:16
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6bdbfd in main common-main.c:52:11
#13 0x7f0430502349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 16 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These leaks all happen at the end of cmd_mv, hence don't matter in any
way. But we still fix the easy ones and squash the rest to get us closer
to being able to run tests without leaks.
LSAN output from t0050:
Direct leak of 384 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa0a7e1 in add_entry string-list.c:44:2
#3 0xa0a7e1 in string_list_insert string-list.c:58:14
#4 0x5dac03 in cmd_mv builtin/mv.c:248:4
#5 0x4ce83e in run_builtin git.c:475:11
#6 0x4ccafe in handle_builtin git.c:729:3
#7 0x4cb01c in run_argv git.c:818:4
#8 0x4cb01c in cmd_main git.c:949:19
#9 0x6bd9ad in main common-main.c:52:11
#10 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bd09 in do_xmalloc wrapper.c:41:8
#2 0x5dbc34 in internal_prefix_pathspec builtin/mv.c:32:2
#3 0x5da575 in cmd_mv builtin/mv.c:158:14
#4 0x4ce83e in run_builtin git.c:475:11
#5 0x4ccafe in handle_builtin git.c:729:3
#6 0x4cb01c in run_argv git.c:818:4
#7 0x4cb01c in cmd_main git.c:949:19
#8 0x6bd9ad in main common-main.c:52:11
#9 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bd09 in do_xmalloc wrapper.c:41:8
#2 0x5dbc34 in internal_prefix_pathspec builtin/mv.c:32:2
#3 0x5da4e4 in cmd_mv builtin/mv.c:148:11
#4 0x4ce83e in run_builtin git.c:475:11
#5 0x4ccafe in handle_builtin git.c:729:3
#6 0x4cb01c in run_argv git.c:818:4
#7 0x4cb01c in cmd_main git.c:949:19
#8 0x6bd9ad in main common-main.c:52:11
#9 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x49a9a2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xa8c119 in xcalloc wrapper.c:140:8
#2 0x5da585 in cmd_mv builtin/mv.c:159:22
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6bd9ad in main common-main.c:52:11
#8 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x49a9a2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xa8c119 in xcalloc wrapper.c:140:8
#2 0x5da4f8 in cmd_mv builtin/mv.c:149:10
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6bd9ad in main common-main.c:52:11
#8 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa00226 in strbuf_grow strbuf.c:98:2
#3 0xa00226 in strbuf_vaddf strbuf.c:394:3
#4 0xa065c7 in xstrvfmt strbuf.c:981:2
#5 0xa065c7 in xstrfmt strbuf.c:991:8
#6 0x9e7ce7 in prefix_path_gently setup.c:115:15
#7 0x9e7fa6 in prefix_path setup.c:128:12
#8 0x5dbdbf in internal_prefix_pathspec builtin/mv.c:55:23
#9 0x5da575 in cmd_mv builtin/mv.c:158:14
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6bd9ad in main common-main.c:52:11
#15 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa00226 in strbuf_grow strbuf.c:98:2
#3 0xa00226 in strbuf_vaddf strbuf.c:394:3
#4 0xa065c7 in xstrvfmt strbuf.c:981:2
#5 0xa065c7 in xstrfmt strbuf.c:991:8
#6 0x9e7ce7 in prefix_path_gently setup.c:115:15
#7 0x9e7fa6 in prefix_path setup.c:128:12
#8 0x5dbdbf in internal_prefix_pathspec builtin/mv.c:55:23
#9 0x5da4e4 in cmd_mv builtin/mv.c:148:11
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6bd9ad in main common-main.c:52:11
#15 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 558 byte(s) leaked in 7 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_for_each_repo() copies argv into args (a strvec), which is later
passed into run_command_on_repo(), which in turn copies that strvec onto
the end of child.args. The initial copy is unnecessary (we never modify
args). We therefore choose to just pass argv directly into
run_command_on_repo(), which lets us avoid the copy and fixes the leak.
LSAN output from t0068:
Direct leak of 192 byte(s) in 1 object(s) allocated from:
#0 0x7f63bd4ab8b0 in realloc (/usr/lib64/libasan.so.4+0xdc8b0)
#1 0x98d7e6 in xrealloc wrapper.c:126
#2 0x916914 in strvec_push_nodup strvec.c:19
#3 0x916a6e in strvec_push strvec.c:26
#4 0x4be4eb in cmd_for_each_repo builtin/for-each-repo.c:49
#5 0x410dcd in run_builtin git.c:475
#6 0x410dcd in handle_builtin git.c:729
#7 0x414087 in run_argv git.c:818
#8 0x414087 in cmd_main git.c:949
#9 0x40e9ec in main common-main.c:52
#10 0x7f63bc9fa349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 22 byte(s) in 2 object(s) allocated from:
#0 0x7f63bd445e30 in __interceptor_strdup (/usr/lib64/libasan.so.4+0x76e30)
#1 0x98d698 in xstrdup wrapper.c:29
#2 0x916a63 in strvec_push strvec.c:26
#3 0x4be4eb in cmd_for_each_repo builtin/for-each-repo.c:49
#4 0x410dcd in run_builtin git.c:475
#5 0x410dcd in handle_builtin git.c:729
#6 0x414087 in run_argv git.c:818
#7 0x414087 in cmd_main git.c:949
#8 0x40e9ec in main common-main.c:52
#9 0x7f63bc9fa349 in __libc_start_main (/lib64/libc.so.6+0x24349)
See also discussion about the original implementation below - this code
appears to have evolved from a callback explaining the double-strvec-copy
pattern, but there's no strong reason to keep that now:
https://lore.kernel.org/git/68bbeca5-314b-08ee-ef36-040e3f3814e9@gmail.com/
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
relative_url() populates sb. In the normal return path, its buffer is
detached using strbuf_detach(). However the early return path does
nothing with sb, which means that sb's memory is leaked - therefore
we add a release to avoid this leak.
The reset is also only necessary for the normal return path, hence we
move it down to after the early-return to avoid unnecessary work.
LSAN output from t0060:
Direct leak of 121 byte(s) in 1 object(s) allocated from:
#0 0x7f31246f28b0 in realloc (/usr/lib64/libasan.so.4+0xdc8b0)
#1 0x98d7d6 in xrealloc wrapper.c:126
#2 0x909a60 in strbuf_grow strbuf.c:98
#3 0x90bf00 in strbuf_vaddf strbuf.c:401
#4 0x90c321 in strbuf_addf strbuf.c:335
#5 0x5cb78d in relative_url builtin/submodule--helper.c:182
#6 0x5cbe46 in resolve_relative_url_test builtin/submodule--helper.c:248
#7 0x410dcd in run_builtin git.c:475
#8 0x410dcd in handle_builtin git.c:729
#9 0x414087 in run_argv git.c:818
#10 0x414087 in cmd_main git.c:949
#11 0x40e9ec in main common-main.c:52
#12 0x7f3123c41349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 121 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This parameter has not been used since the function was introduced in
8c8195e9c3 (submodule--helper: introduce add-clone subcommand,
2021-07-10).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', once it is determined that
we have to create a merge commit, calls 'create_autostash' if
'--autostash' is given.
As explained in a03b55530a, and made more abvious by the tests added in
that commit, the autostash is then applied if the merge succeeds, either
directly or by committing (after conflict resolution or if '--no-commit'
was given), or if the merge is aborted with 'git merge --abort'. In some
other cases, like the user calling 'git reset --merge' or 'git merge
--quit', the autostash is not applied, but saved in the stash list.
However, there exists a scenario that creates an autostash but does not
apply nor save it to the stash list: if the chosen merge strategy
completely fails to handle the merge, i.e. 'try_merge_strategy' returns
2.
Apply the autostash in that case also. An easy way to test that is to
try to merge more than two commits but explicitely ask for the 'recursive'
merge strategy.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', in the fast-forward case,
calls 'create_autostash' before calling 'checkout_fast_forward' if
'--autostash' is given.
However, if 'checkout_fast_forward' fails, the autostash is not applied
to the working tree, nor saved in the stash list, since the code simply
calls 'goto done'.
Be more helpful to the user by applying the autostash in that case.
An easy way to test a failing fast-forward is when we are merging a
branch that has a tracked file that conflicts with an untracked file in
the working tree.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The variable 'best_strategy' holds the name of the merge strategy that
resulted in fewer conflicts, if several strategies were tried. When
that's the case but the best strategy was not the first one tried, we
inform the user which strategy was the "best" one before recreating the
merge and leaving the conflicted files in the tree.
This informational message is missing the word "strategy", so it shows
something like:
Using the recursive to prepare resolving by hand.
Fix that.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rev-list" learns to omit the "commit <object-name>" header
lines from the output with the `--no-commit-header` option.
* bc/rev-list-without-commit-line:
rev-list: add option for --pretty=format without header
|
|
Since cd57bc41bb (builtin/multi-pack-index.c: display usage on
unrecognized command, 2021-03-30) we have used a "usage" label to avoid
having two separate callers of usage_with_options (one when no arguments
are given, and another for unrecognized sub-commands).
But the first caller has been broken since cd57bc41bb, since it will
happily jump to usage without arguments, and then pass argv[0] to the
"unrecognized subcommand" error.
Many compilers will save us from a segfault here, but the end result is
ugly, since it mentions an unrecognized subcommand when we didn't even
pass one, and (on GCC) includes "(null)" in its output.
Move the "usage" label down past the error about unrecognized
subcommands so that it is only triggered when it should be. While we're
at it, bulk up our test coverage in this area, too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup around struct_type_init() functions.
* ab/struct-init:
string-list.h users: change to use *_{nodup,dup}()
string-list.[ch]: add a string_list_init_{nodup,dup}()
dir.[ch]: replace dir_init() with DIR_INIT
*.c *_init(): define in terms of corresponding *_INIT macro
*.h: move some *_INIT to designated initializers
|
|
Tiny code clean-up.
* ar/help-micro-cleanup:
help: convert git_cmd to page in one place
|
|
Code clean-up.
* ar/submodule-helper-include-cleanup:
submodule--helper: remove redundant include
|
|
Code clean-up and leak plugging in "git bundle".
* ab/bundle-updates:
bundle: remove "ref_list" in favor of string-list.c API
bundle.c: use a temporary variable for OIDs and names
bundle cmd: stop leaking memory from parse_options_cmd_bundle()
|
|
Fill test gaps.
* ab/show-branch-tests:
show-branch tests: add missing tests
show-branch: don't <COLOR></RESET> for space characters
show-branch tests: modernize test code
show-branch tests: rename the one "show-branch" test file
|
|
Code recently added to support common ancestry negotiation during
"git push" did not sanity check its arguments carefully enough.
* ab/fetch-negotiate-segv-fix:
fetch: fix segfault in --negotiate-only without --negotiation-tip=*
fetch: document the --negotiate-only option
send-pack.c: move "no refs in common" abort earlier
|
|
The default reason stored in the lock file, "added with --lock",
is unlikely to be what the user would have given in a separate
`git worktree lock` command. Allowing `--reason` to be specified
along with `--lock` when adding a working tree gives the user control
over the reason for locking without needing a second command.
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previous changes did the necessary improvements to unpack-trees.c and
diff-lib.c in order to modify a sparse index based on its comparision
with a tree. The only remaining work is to remove some
ensure_full_index() calls and add tests that verify that the index is
not expanded in our interesting cases. Include 'switch' and 'restore' in
these tests, as they share a base implementation with 'checkout'.
Here are the relevant performance results from
p2000-sparse-operations.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------
2000.18: git checkout -f - (full-v3) 0.49(0.43+0.03) 0.47(0.39+0.05) -4.1%
2000.19: git checkout -f - (full-v4) 0.45(0.37+0.06) 0.42(0.37+0.05) -6.7%
2000.20: git checkout -f - (sparse-v3) 0.76(0.71+0.07) 0.04(0.03+0.04) -94.7%
2000.21: git checkout -f - (sparse-v4) 0.75(0.72+0.04) 0.05(0.06+0.04) -93.3%
It is important to compare the full index case to the sparse index case,
as the previous results for the sparse index were inflated by the index
expansion. For index v4, this is an 88% improvement.
On an internal repository with over two million paths at HEAD and a
sparse-checkout definition containing ~60,000 of those paths, 'git
checkout' went from 3.5s to 297ms with this change. The theoretical
optimum where only those ~60,000 paths exist was 275ms, so the extra
sparse directory entries contribute a 22ms overhead.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update 'git commit' to allow using the sparse-index in memory without
expanding to a full one. The only place that had an ensure_full_index()
call was in cache_tree_update(). The recursive algorithm for
update_one() was already updated in 2de37c536 (cache-tree: integrate
with sparse directory entries, 2021-03-03) to handle sparse directory
entries in the index.
Most of this change involves testing different command-line options that
allow specifying which on-disk changes should be included in the commit.
This includes no options (only take currently-staged changes), -a (take
all tracked changes), and --include (take a list of specific changes).
To simplify testing that these options do not expand the index, update
the test that previously verified that 'git status' does not expand the
index with a helper method, ensure_not_expanded().
This allows 'git commit' to operate much faster when the sparse-checkout
cone is much smaller than the full list of files at HEAD.
Here are the relevant lines from p2000-sparse-operations.sh:
Test HEAD~1 HEAD
----------------------------------------------------------------------------------
2000.14: git commit -a -m A (full-v3) 0.35(0.26+0.06) 0.36(0.28+0.07) +2.9%
2000.15: git commit -a -m A (full-v4) 0.32(0.26+0.05) 0.34(0.28+0.06) +6.3%
2000.16: git commit -a -m A (sparse-v3) 0.63(0.59+0.06) 0.04(0.05+0.05) -93.7%
2000.17: git commit -a -m A (sparse-v4) 0.64(0.59+0.08) 0.04(0.04+0.04) -93.8%
It is important to compare the full-index case to the sparse-index case,
so the improvement for index version v4 is actually an 88% improvement in
this synthetic example.
In a real repository with over two million files at HEAD and 60,000
files in the sparse-checkout definition, the time for 'git commit -a'
went from 2.61 seconds to 134ms. I compared this to the result if the
index only contained the paths in the sparse-checkout definition and
found the theoretical optimum to be 120ms, so the out-of-cone paths only
add a 12% overhead.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By testing 'git -c core.fsmonitor= status -uno', we can check for the
simplest index operations that can be made sparse-aware. The necessary
implementation details are already integrated with sparse-checkout, so
modify command_requires_full_index to be zero for cmd_status().
In refresh_index(), we loop through the index entries to refresh their
stat() information. However, sparse directories have no stat()
information to populate. Ignore these entries.
This allows 'git status' to no longer expand a sparse index to a full
one. This is further tested by dropping the "-uno" option and adding an
untracked file into the worktree.
The performance test p2000-sparse-checkout-operations.sh demonstrates
these improvements:
Test HEAD~1 HEAD
-----------------------------------------------------------------------------
2000.2: git status (full-index-v3) 0.31(0.30+0.05) 0.31(0.29+0.06) +0.0%
2000.3: git status (full-index-v4) 0.31(0.29+0.07) 0.34(0.30+0.08) +9.7%
2000.4: git status (sparse-index-v3) 2.35(2.28+0.10) 0.04(0.04+0.05) -98.3%
2000.5: git status (sparse-index-v4) 2.35(2.24+0.15) 0.05(0.04+0.06) -97.9%
Note that since HEAD~1 was expanding the sparse index by parsing trees,
it was artificially slower than the full index case. Thus, the 98%
improvement is misleading, and instead we should celebrate the 0.34s to
0.05s improvement of 85%. This is more indicative of the peformance
gains we are expecting by using a sparse index.
Note: we are dropping the assignment of core.fsmonitor here. This is not
necessary for the test script as we are not altering the config any
other way. Correct integration with FS Monitor will be validated in
later changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- default lock string, "added with --lock"
- temporary lock string, "initializing"
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
|
|
Some more code and doc clarification around "git push".
* fc/push-simple-updates-cleanup:
push: don't get a full remote object
push: only check same_remote when needed
push: remove trivial function
push: remove redundant check
push: factor out the typical case
push: get rid of all the setup_push_* functions
push: trivial simplifications
push: make setup_push_* return the dst
push: only get the branch when needed
push: factor out null branch check
push: split switch cases
push: return immediately in trivial switch case
push: create new get_upstream_ref() helper
|
|
Some code and doc clarification around "git push".
* fc/push-simple-updates:
doc: push: explain default=simple correctly
push: remove unused code in setup_push_upstream()
push: simplify setup_push_simple()
push: reorganize setup_push_simple()
push: copy code to setup_push_simple()
push: hedge code of default=simple
push: rename !triangular to same_remote
|
|
"git cat-file --batch-all-objects"" misbehaved when "--batch" is in
use and did not ask for certain object traits.
* zh/cat-file-batch-fix:
cat-file: merge two block into one
cat-file: handle trivial --batch format with --batch-all-objects
|
|
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `git diff --merge-base` was introduced at around Git 2.30, the
documentation included a few errors.
In the example given for `git diff --cached --merge-base`, the
`--cached` flag was omitted for the `--merge-base` example. Add the
missing flag.
In the `git diff <commit>` case, we failed to mention that
`--merge-base` is an available option. Give the usage of `--merge-base`
as an option there.
Finally, there are two errors in the usage of `git diff`. Firstly, we do
not mention `--merge-base` in the `git diff --cached` case. Mention it
so that it's consistent with the documentation. Secondly, we put the
`[--merge-base]` in between `<commit>` and `[<commit>...]`. Move the
`[--merge-base]` so that it's beside `[<options>]` which is a more
logical grouping.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
9cf6d3357aa (Add git-index-pack utility, 2005-10-12) and
466dbc42f58 (receive-pack: Send internal errors over side-band #2,
2010-02-10) we added these static functions and forward-declared their
__attribute__((printf)).
I think this may have been to work around some compiler limitation at
the time, but in any case we have a lot of code that uses the briefer
way of declaring these that I'm using here, so if we had any such
issues with compilers we'd have seen them already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's add a new "add-clone" subcommand to `git submodule--helper` with
the goal of converting part of the shell code in git-submodule.sh
related to `git submodule add` into C code. This new subcommand clones
the repository that is to be added, and checks out to the appropriate
branch.
This is meant to be a faithful conversion that leaves the behaviour of
'cmd_add()' script unchanged.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Prathamesh Chavan <pc44800@gmail.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Separate out the core logic of module_clone() from the flag
parsing---this way we can call the equivalent of the `submodule--helper
clone` subcommand directly within C, without needing to push arguments
in a strvec.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even when the `--allow-empty-message` option is given, "git commit"
offers an interactive editor session with prefilled message that says
the commit will be aborted if the buffer is emptied, which is wrong.
Remove the "an empty message aborts" part from the message when the
option is given to fix it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Hu Jialun <hujialun@comp.nus.edu.sg>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Strings of hint messages inserted into editor on interactive commit was
scattered in-line, rendering the code harder to understand at first
glance.
Extract those messages out into separate variables to make the code
outline easier to follow.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Hu Jialun <hujialun@comp.nus.edu.sg>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
René Scharfe
Andrzej Hunt
Philippe Blain
Taylor Blau
Stephen Manz
Derrick Stolee
Ævar Arnfjörð Bjarmason
Denton Liu
Atharva Raykar
brian m. carlson
Hu Jialun