| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The cmd_foo() function is a moral equivalent of 'main' for a Git
subcommand 'git foo', and as such, it is allowed to do many things
that make it unsuitable to be called as a subroutine, including
- call exit(3) to terminate the process;
- allocate resource held and used throughout its lifetime, without
releasing it upon return/exit;
- rely on global variables being initialized at program startup,
and update them as needed, making another clean invocation of the
function impossible.
The call to cmd_diff_index() "git describe" makes has been working
by accident that the function did not call exit(3); it sets a bad
precedent for people to cut and paste.
We could invoke it via the run_command() interface, but the diff
family of commands have helper functions in diff-lib.c that are
meant to be usable as subroutines, and using the latter does not
make the resulting code all that longer. Use it.
Note that there is also an invocation of cmd_name_rev() at the end;
"git describe --contains" massages its command line arguments to be
suitable for "git name-rev" invocation and jumps to it, never to
regain control. This call is left as-is as an exception to the
rule. When we start to allow calling name-rev repeatedly as a
helper function, we would be able to remove this call as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* rs/merge-microcleanup:
merge: use skip_prefix()
|
|
Message fix.
* rj/add-chmod-error-message:
builtin/add: add detail to a 'cannot chmod' error message
|
|
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
|
|
Memory leak in an error codepath has been plugged.
* rs/fsck-obj-leakfix:
fsck: free buffers on error in fsck_obj()
|
|
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
|
|
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
|
|
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
|
|
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
|
|
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
If this works out OK, I think there are low-hanging fruits in
other commands like "git branch" that outputs long list in one mode
while taking input in another.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
|
|
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
|
|
Code cleanup.
* jt/subprocess-handshake:
sub-process: refactor handshake to common function
Documentation: migrate sub-process docs to header
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
|
|
Code cleanup.
* dc/fmt-merge-msg-microcleanup:
fmt-merge-msg: fix coding style
|
|
API fix.
* js/run-process-parallel-api-fix:
run_processes_parallel: change confusing task_cb convention
|
|
Code clean-up.
* rs/pack-objects-pbase-cleanup:
pack-objects: remove unnecessary NULL check
|
|
Code clean-up.
* jt/fsck-code-cleanup:
fsck: cleanup unused variable
object: remove "used" field from struct object
fsck: remove redundant parse_tree() invocation
|
|
Code clean-up.
* rs/move-array:
ls-files: don't try to prune an empty index
apply: use COPY_ARRAY and MOVE_ARRAY in update_image()
use MOVE_ARRAY
add MOVE_ARRAY
|
|
"git commit" when seeing an totally empty message said "you did not
edit the message", which is clearly wrong. The message has been
corrected.
* ks/commit-abort-on-empty-message-fix:
commit: check for empty message before the check for untouched template
|
|
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
|
|
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
|
|
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
write_merge_state() writes out the merge heads, mode, and msg. But we
may want to write out heads, mode without the msg. So, split out heads
(+mode) into a separate function write_merge_heads() that is called by
write_merge_state().
No funtional change so far, except when these non-atomic writes are
interrupted: we write heads-mode-msg now when we used to write
heads-msg-mode.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
prepare_to_commit() cannot be reached in the non-squash case:
It is called by merge_trivial() and finish_automerge() only, but the
calls to the latter are somewhat hard to track:
If option_commit is not set, the code in cmd_merge() uses a fake
conflict return code (ret=1) to avoid writing the tree, which also
avoids setting automerge_was_ok (just as in the proper ret==1 case), so
that finish_automerge() is not called.
To ensure that no code change breaks that assumption, safe-guard
prepare_to_commit() by a BUG() statement.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the code for releasing tree buffers and commit buffers in
fsck_obj() to the end of the function and make sure it's executed no
matter of an error is encountered or not.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of a magic string length constant by using skip_prefix() instead
of starts_with().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to adding the missing newline, add the x-ecutable bit
'mode change' character to the error message. This message now has
the same form as similar messages output by 'update-index'.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If there was no 'Signed-off-by:' trailer but another trailer such as
'Reported-by:' then 'git am --signoff' would add a blank line between
the existing trailers and the added 'Signed-off-by:' line. e.g.
Rebase accepts '--rerere-autoupdate' as an option but only honors
it if '-m' is also given. Fix it for a non-interactive rebase by
passing on the option to 'git am' and 'git cherry-pick'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Fix by using the code provided for this purpose in sequencer.c.
Change the tests so that they check the formatting of the
'Signed-off-by:' lines rather than just grepping for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach 'git clone --recurse-submodules' to respect the '-q' option by
passing down the quiet flag to the process which handles cloning of
submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch taught `git tag` to only respect `pager.tag` in
list-mode. That patch left the default value of `pager.tag` at "off".
After that patch, it makes sense to let the default value be "on"
instead, since it will help with listing many tags, but will not hurt
users of `git tag -a` as it would have before. Make that change. Update
documentation and tests.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using, e.g., `git -c pager.tag tag -a new-tag` results in errors such as
"Vim: Warning: Output is not to a terminal" and a garbled terminal.
Someone who makes use of both `git tag -a` and `git tag -l` will
probably not set `pager.tag`, so that `git tag -a` will actually work,
at the cost of not paging output of `git tag -l`.
Use the mechanisms introduced in two earlier patches to ignore
`pager.tag` in git.c and let the `git tag` builtin handle it on its own.
Only respect `pager.tag` when running in list-mode.
There is a window between where the pager is started before and after
this patch. This means that early errors can behave slightly different
before and after this patch. Since operation-parsing has to happen
inside this window, this can be seen with `git -c pager.tag="echo pager
is used" tag -l --unknown-option`. This change in paging-behavior should
be acceptable since it only affects erroneous usages.
Update the documentation and update tests.
If an alias is used to run `git tag -a`, then `pager.tag` will still be
respected. Document this known breakage. It will be fixed in a later
commit. Add a similar test for `-l`, which works.
Noticed-by: Anatoly Borodin <anatoly.borodin@gmail.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user gives us no starting point for a traversal, we
want to complain with our normal usage message. But if they
tried to do so with "--all" or "--glob", but that happened
not to match any refs, the usage message isn't helpful. We
should just give them the empty output they asked for
instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cherry-pick and revert should not accept --[no-]rerere-autoupdate once
they have started.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Save the rerere-autoupdate setting so that it is remembered after
stopping for the user to resolve conflicts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
|
|
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
|
|
Remove the unused variable "heads" from cmd_fsck().
This variable was made unused in commit c3271a0 ("fsck: do not fallback
"git fsck <bogus>" to "git fsck"", 2017-01-17).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Align argument list and place opening brace on its own line.
Signed-off-by: Dimitrios Christidis <dimitrios@christidis.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By declaring the task_cb parameter of type `void **`, the signature of
the get_next_task method suggests that the "task-specific cookie" can be
defined in that method, and the signatures of the start_failure and of
the task_finished methods declare that parameter of type `void *`,
suggesting that those methods are mere users of said cookie.
That convention makes a total lot of sense, because the tasks are pretty
much dead when one of the latter two methods is called: there would be
little use to reset that cookie at that point because nobody would be
able to see the change afterwards.
However, this is not what the code actually does. For all three methods,
it passes the *address* of pp->children[i].data.
As reasoned above, this behavior makes no sense. So let's change the
implementation to adhere to the convention suggested by the signatures.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 06bf4ad1d (push: propagate remote and refspec with
--recurse-submodules) push was taught how to propagate a refspec down to
submodules when the '--recurse-submodules' flag is given. The only refspecs
that are allowed to be propagated are ones which name a ref which exists
in both the superproject and the submodule, with the caveat that 'HEAD'
was disallowed.
This patch teaches push-check (the submodule helper which determines if
a refspec can be propagated to a submodule) to permit propagating 'HEAD'
if and only if the superproject and the submodule both have the same
named branch checked out and the submodule is not in a detached head
state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "used" field in struct object is only used by builtin/fsck. Remove
that field and modify builtin/fsck to use a flag instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If obj->type == OBJ_TREE, an invocation of fsck_walk() will invoke
parse_tree() and return quickly if that returns nonzero, so it is of no
use for traverse_one_object() to invoke parse_tree() in this situation
before invoking fsck_walk(). Remove that code.
The behavior of traverse_one_object() is changed slightly in that it now
returns -1 instead of 1 in the case that parse_tree() fails, but this is
not an issue because its only caller (traverse_reachable) does not care
about the value as long as it is nonzero.
This code was introduced in commit 271b8d2 ("builtin-fsck: move away
from object-refs to fsck_walk", 2008-02-25). The same issue existed in
that commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If done_pbase_paths is NULL then done_pbase_paths_num must be zero and
done_pbase_path_pos() returns -1 without accessing the array, so the
check is not necessary.
If the invariant was violated then the check would make sure we keep
on going and allocate the necessary amount of memory in the next
ALLOC_GROW call. That sounds nice, but all array entries except for
one would contain garbage data.
If the invariant was violated without the check we'd get a segfault in
done_pbase_path_pos(), i.e. an observable crash, alerting us of the
presence of a bug.
Currently there is no such bug: Only the functions check_pbase_path()
and cleanup_preferred_base() change pointer and counter, and both make
sure to keep them in sync. Get rid of the check anyway to allow us to
see if later changes introduce such a defect, and to simplify the code.
Detected by Coverity Scan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
|
|
The check for whether the template given to 'git commit' is untouched
is done before the empty message check. This results in a wrong error
message being displayed in the following case. When the user removes
everything in template completely to abort the commit he is shown the
"template untouched" error which is wrong. He should be shown the
"empty message" error.
Do the empty message check before checking for an untouched template
thus fixing this issue.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Exit early when asked to prune an index that contains no entries to
begin with. This avoids pointer arithmetic on istate->cache, which is
possibly NULL in that case.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the code for moving members inside of an array and make it more
robust by using the helper macro MOVE_ARRAY. It calculates the size
based on the specified number of elements for us and supports NULL
pointers when that number is zero. Raw memmove(3) calls with NULL can
cause the compiler to (over-eagerly) optimize out later NULL checks.
This patch was generated with contrib/coccinelle/array.cocci and spatch
(Coccinelle).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pull --rebase --recurse-submodules" learns to rebase the
branch in the submodules to an updated base.
* sb/pull-rebase-submodule:
builtin/fetch cleanup: always set default value for submodule recursing
pull: optionally rebase submodules (remote submodule changes only)
builtin/fetch: parse recurse-submodules-default at default options parsing
builtin/fetch: factor submodule recurse parsing out to submodule config
|
|
Update the hashmap API so that data to customize the behaviour of
the comparison function can be specified at the time a hashmap is
initialized.
* sb/hashmap-customize-comparison:
hashmap: migrate documentation from Documentation/technical into header
patch-ids.c: use hashmap correctly
hashmap.h: compare function has access to a data field
|
|
Code cleanup.
* ab/grep-lose-opt-regflags:
grep: remove redundant REG_NEWLINE when compiling fixed regex
grep: remove regflags from the public grep_opt API
grep: remove redundant and verbose re-assignments to 0
grep: remove redundant "fixed" field re-assignment to 0
grep: adjust a redundant grep pattern type assignment
grep: remove redundant double assignment to 0
|
|
When color placeholders like %(color:red) are used in a
ref-filter format, we unconditionally output the colors,
even if the user has asked us for no colors. This usually
isn't a problem when the user is constructing a --format on
the command line, but it means we may do the wrong thing
when the format is fed from a script or alias. For example:
$ git config alias.b 'branch --format=%(color:green)%(refname)'
$ git b --no-color
should probably omit the green color. Likewise, running:
$ git b >branches
should probably also omit the color, just as we would for
all baked-in coloring (and as we recently started to do for
user-specified colors in --pretty formats).
This commit makes both of those cases work by teaching
the ref-filter code to consult want_color() before
outputting any color. The color flag in ref_format defaults
to "-1", which means we'll consult color.ui, which in turn
defaults to the usual isatty() check on stdout. However,
callers like git-branch which support their own color config
(and command-line options) can override that.
The new tests independently cover all three of the callers
of ref-filter (for-each-ref, tag, and branch). Even though
these seem redundant, it confirms that we've correctly
plumbed through all of the necessary config to make colors
work by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Michael J Gruber
René Scharfe
Ramsay Jones
Phillip Wood
Brandon Williams
Martin Ågren
Jeff King
Jonathan Tan
Dimitrios Christidis
Johannes Schindelin
Kaartic Sivaraam