| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The new command "git restore" (together with "git switch") are added
to avoid the confusion of one-command-do-all "git checkout" for new
users. They are also helpful to avoid ambiguous context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands.
One nice thing about git-restore is the ability to restore
"everything", so it can be used in "git status" advice instead of both
"git checkout" and "git reset". The three commands suggested by "git
status" are add, rm and restore.
"git checkout" is also removed from "git help" (i.e. it's no longer
considered a commonly used command)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-restore is different from git-checkout that it only restores the
worktree by default, not both worktree and index. add--interactive
needs some update to support this mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a more specific option name to express its purpose. --force may come
back as an alias of --ignore-unmerged and possibly more. But since this
is a destructive operation, I don't see why we need to "force" anything
more. We already don't hold back.
When 'checkout --force' or 'restore --ignore-unmerged' is used, we may
also print warnings about unmerged entries being ignore. Since this is
not exactly warning (people tell us to do so), more informational, let
it be suppressed if --quiet is given. This is a behavior change for
git-checkout.
PS. The diff looks a bit iffy since --force is moved to
add_common_switch_branch_options() (i.e. for switching). But
git-checkout is also doing switching and inherits this --force.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git restore --staged" without --source does not make much sense since
by default we restore from the index. Instead of copying the index to
itself, set the default source to HEAD in this case, yielding behavior
that matches "git reset -- <paths>".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-checkout rejects plenty of invalid option combinations. Since
git-checkout is equivalent of either
git restore --source --staged --worktree
or
git restore --worktree
that still leaves the new mode 'git restore --index' unprotected. Reject
some more invalid option combinations.
The other new mode 'restore --source --worktree' does not need anything
else.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git checkout <tree-ish> <pathspec>' updates both index and
worktree. But updating the index when you want to restore worktree
files is non-intuitive. The index contains the data ready for the next
commit, and there's no indication that the user will want to commit
the restored versions.
'git restore' therefore by default only touches worktree. The user has
the option to update either the index with
git restore --staged --source=<tree> <path> (1)
or update both with
git restore --staged --worktree --source=<tree> <path> (2)
PS. Orignally I wanted to make worktree update default and form (1)
would add index update while also updating the worktree, and the user
would need to do "--staged --no-worktree" to update index only. But it
looks really confusing that "--staged" option alone updates both. So
now form (2) is used for both, which reads much more obvious.
PPS. Yes form (1) overlaps with "git reset <rev> <path>". I don't know
if we can ever turn "git reset" back to "_always_ reset HEAD and
optionally do something else".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Overlay mode is considered confusing when the command is about
restoring files on worktree. Disable it by default. The user can still
turn it on, or use 'git checkout' which still has overlay mode on by
default.
While at it, make the check in checkout_branch() stricter. Neither
--overlay or --no-overlay should be accepted in branch switching mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git restore" without arguments does not make much sense when
it's about restoring files (what files now?). We could default to
either
git restore .
or
git restore :/
Neither is intuitive. Make the user always give pathspec, force the
user to think the scope of restore they want because this is a
destructive operation.
"git restore -p" without pathspec is an exception to this
because it really is a separate mode. It will be treated as running
patch mode on the whole worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another departure from 'git checkout' syntax, which uses -- to
separate ref and pathspec. The observation is restore (or "git
checkout -- <pathspec>") is most often used to restore some files from
the index. If this is correct, we can simplify it by taking away the
ref, so that we can write
git restore some-file
without worrying about some-file being a ref and whether we need to do
git restore -- some-file
for safety. If the source of the restore comes from a tree, it will be
in the form of an option with value, e.g.
git restore --source=this-tree some-file
This is of course longer to type than using "--". But hopefully it
will not be used as often, and it is clearly easier to understand.
dwim_new_local_branch is no longer set (or unset) in cmd_restore_files()
because it's irrelevant because we don't really care about dwim-ing.
With accept_ref being unset, dwim can't happen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switching and creating branches always involves knowing the
<start-point> to begin the new branch from. Sometimes, people want to
create a new branch that does not have any commits yet; --orphan is a
flag to allow that.
--orphan overrides the default of HEAD for <start-point> instead causing
us to start from an empty history with all tracked files removed from
the index and working tree. The use of --orphan is incompatible with
specifying a <start-point>.
A note on the implementation. An alternative is just create a dummy
commit in-core with empty tree and switch to it. But there's a chance
the commit's SHA-1 may end up somewhere permanent like reflog. It's best
to make sure "commit" pointer is NULL to avoid it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless you know what you're doing, switching to another branch to do
something then switching back could be confusing. Worse, you may even
forget that you're in the middle of something. By the time you realize,
you may have done a ton of work and it gets harder to go back.
A new option --ignore-in-progress was considered but dropped because it
was not exactly clear what should happen. Sometimes you can switch away
and get back safely and resume the operation. Sometimes not. And the
git-checkout behavior is automatically clear merge/revert/cherry-pick,
which makes it a bit even more confusing [1].
We may revisit and add this option in the future. But for now play it
safe and not allow it (you can't even skip this check with --force). The
user is suggested to cancel the operation by themselves (and hopefully
they do consider the consequences, not blindly type the command), or to
create a separate worktree instead of switching. The third option is
the good old "git checkout", but it's not mentioned.
[1] CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we switch from one branch to another, it makes sense to show a
summary of local changes since there could be conflicts, or some files
left modified.... When switch is used solely for creating a new
branch (and "switch" to the same commit) or detaching, we don't really
need to show anything.
"git checkout" does it anyway for historical reasons. But we can start
with a clean slate with switch and don't have to.
This essentially reverts fa655d8411 (checkout: optimize "git checkout
-b <new_branch>" - 2018-08-16) and make it default for switch,
but also for -B and --detach. Users of big repos are encouraged to
move to switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is already the default in git-checkout. The real change in here is
just minor cleanup. The main excuse is to explain why dwim is kept default.
Contrary to detach mode that is easy to get into and confusing to get
back out. Automatically creating a tracking branch often does not kick
in as often (you would need a branch of the same name on a remote). And
since the branch creation is reported clearly, the user should be able
to undo/delete it if it's unwanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" automatically detaches branches and --detach is not
that useful (--no-detach is more likely). But for "switch", you
may want to use it more often once you're used to detached HEAD. This
of course adds -d to git-checkout but it does not harm (yet?) to do it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout <commit>" will checkout the commit in question and
detach HEAD from the current branch. It is naturally a right thing to
do once you get git references. But detached HEAD is a scary concept
to new users because we show a lot of warnings and stuff, and it could
be hard to get out of (until you know better).
To keep switch a bit more friendly to new users, we only allow
entering detached HEAD mode when --detach is given. "git
switch" must take a branch (unless you create a new branch,
then of course switch can take any commit-ish)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" can be executed without any arguments. What it does is
not exactly great: it switches from HEAD to HEAD and shows worktree
modification as a side effect.
Make switch reject this case. Just use "git status" if you want
that side effect. For switch, you have to either
- really switch a branch
- (explicitly) detach from the current branch
- create a new branch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command is about switching branch (or creating a new one) and
should not accept pathspec. This helps simplify ambiguation
handling. The other two ("git checkout" and "git restore") of
course do accept pathspec as before.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option is ancient. Nowadays reflog is enabled by default and
automatically created for new branches. Keep it in git-checkout only.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--discard-changes is a better name than --force for this option since
it's what really happens. --force is turned to an alias for
--discard-changes. But it's meant to be an alias for potentially more
force options in the future.
Side note. It's not obvious from the patch but --discard-changes also
affects submodules if --recurse-submodules is used. The knob to force
updating submodules is hidden behind unpack-trees.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The shortcut of these options do not make much sense when used with
switch. And their descriptions are also tied to checkout. Move -b/-B
to cmd_checkout() and new -c/-C with the same functionality in
cmd_switch_branch()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a preparation step for introducing new commands that do parts
of what checkout does. There will be two new commands, one is about
switching branches, detaching HEAD... one about checking out
paths. These share the a subset of command line options. The rest of
command line options are separate.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These local variables are referenced by struct option[]. This struct
will soon be broken down, moved away and we can't rely on local
variables anymore. Move these two to struct checkout_opts in
preparation for that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"opts" will soon be moved out of cmd_checkout(). To keep changes in
that patch smaller, convert "opts" to a pointer and keep the real
thing behind "real_opts".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is in preparation for the new command restore, which also
needs to parse opts->source_tree but does not need all the
disambiguation logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The include list becomes very long and frankly a bit unorganized. With
the exception of builtin.h, cache.h or git-compat-util.h which have to
come first, keep the rest sorted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff --no-index" may still want to access Git goodies like
--ext-diff and --textconv, but so far these have been ignored,
which has been corrected.
* jk/diff-no-index-initialize:
diff: reuse diff setup for --no-index case
|
|
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
|
|
Memfix.
* ab/receive-pack-use-after-free-fix:
receive-pack: fix use-after-free bug
|
|
"git prune" has been taught to take advantage of reachability
bitmap when able.
* jk/prune-optim:
t5304: rename "sha1" variables to "oid"
prune: check SEEN flag for reachability
prune: use bitmaps for reachability traversal
prune: lazily perform reachability traversal
|
|
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
|
|
"git prune-packed" did not notice and complain against excess
arguments given from the command line, which now it does.
* rj/prune-packed-excess-args:
prune-packed: check for too many arguments
|
|
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
* en/combined-all-paths:
log,diff-tree: add --combined-all-paths option
|
|
Update the implementation of pack-redundant for performance in a
repository with many packfiles.
* sc/pack-redundant:
pack-redundant: consistent sort method
pack-redundant: rename pack_list.all_objects
pack-redundant: new algorithm to find min packs
pack-redundant: delete redundant code
pack-redundant: delay creation of unique_objects
t5323: test cases for git-pack-redundant
|
|
"git branch" learned a new subcommand "--show-current".
* du/branch-show-current:
branch: introduce --show-current display option
|
|
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
|
|
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
|
|
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*
|
|
When "--no-index" is in effect (or implied by the arguments), git-diff
jumps early to a special code path to perform that diff. This means we
miss out on some settings like enabling --ext-diff and --textconv by
default.
Let's jump to the no-index path _after_ we've done more setup on
rev.diffopt. Since some of the options don't affect us (e.g., items
related to the index), let's re-order the setup into two blocks (see the
in-code comments).
Note that we also need to stop re-initializing the diffopt struct in
diff_no_index(). This should not be necessary, as it will already have
been initialized by cmd_diff() (and there are no other callers). That in
turn lets us drop the "repository" argument from diff_no_index (which
never made much sense, since the whole point is that you don't need a
repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When studying the performance of 'git push' we would like to know
how much time is spent at various parts of the command. One area
that could cause performance trouble is 'git pack-objects'.
Add trace2 regions around the three main actions taken in this
command:
1. Enumerate objects.
2. Prepare pack.
3. Write pack-file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Classify certain child processes as hooks.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The resolve_ref_unsafe() function can, and sometimes will in the case
of this codepath, return the char * passed to it to the caller. In
this case we construct a strbuf, free it, and then continue using the
dst_name after that free().
The code being fixed dates back to da3efdb17b ("receive-pack: detect
aliased updates which can occur with symrefs", 2010-04-19). When it
was originally added it didn't have this bug, it was introduced when
it was subsequently modified to use strbuf in 6b01ecfe22 ("ref
namespaces: Support remote repositories via upload-pack and
receive-pack", 2011-07-08).
This is theoretically a security issue, the C standard makes no
guarantees that a value you use after free() hasn't been poked at or
changed by something else on the system, but in practice modern OSs
will have mapped the relevant page to this process, so nothing else
would have used it. We do no further allocations between the free()
and use-after-free, so we ourselves didn't corrupt or change the
value.
Jeff investigated that and found: "It probably would be an issue if
the allocation were larger. glibc at least will use mmap()/munmap()
after some cutoff[1], in which case we'd get a segfault from hitting
the unmapped page. But for small allocations, it just bumps brk() and
the memory is still available for further allocations after
free(). [...] If you had a sufficiently large refname you might be
able to trigger the bug [...]. I tried to push such a ref. I had to
manually make a packed-refs file with the long name to avoid
filesystem limits (though probably you could have a long a/b/c/ name
on ext4). But the result can't actually be pushed, because it all has
to fit into a 64k pkt-line as part of the push protocol.".
An a alternative and more succinct way of implementing this would have
been to do the strbuf_release() at the end of check_aliased_update()
and use "goto out" instead of the early "return" statements. Hopefully
this approach of using a helper instead makes it easier to follow.
1. Jeff: "Weirdly, the mmap() cutoff on my glibc system is 135168
bytes. Which is...2^17 + 2^12? 33 pages? I'm sure there's a good
reason for that, but I didn't dig into it."
Reported-by: 王健强 <jianqiang.wang@securitygossip.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Nguyễn Thái Ngọc Duy
Junio C Hamano
Jeff King
Jeff Hostetler
Derrick Stolee
Ævar Arnfjörð Bjarmason