| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Error codepath fix.
* jk/config-blob-sans-repo:
config: die when --blob is used outside a repository
|
|
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
|
|
Error behaviour of "git grep" when it cannot read the index was
inconsistent with other commands that uses the index, which has
been corrected to error out early.
* sb/grep-die-on-unreadable-index:
grep: handle corrupt index files early
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
|
|
"git blame" learns to unhighlight uninteresting metadata from the
originating commit on lines that are the same as the previous one,
and also paint lines in different colors depending on the age of
the commit.
* sb/blame-color:
builtin/blame: add new coloring scheme config
builtin/blame: highlight recently changed lines
builtin/blame: dim uninteresting metadata lines
|
|
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
|
|
"git status" learned to honor a new status.renames configuration to
skip rename detection, which could be useful for those who want to
do so without disabling the default rename detection done by the
"git diff" command.
* bp/status-rename-config:
add status config and command line options for rename detection
|
|
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
|
|
Code clean-up to avoid non-standard-conformant pointer arithmetic.
* rs/no-null-ptr-arith-in-fast-export:
fast-export: avoid NULL pointer arithmetic
|
|
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
|
|
* maint: (25 commits)
Git 2.17.1
Git 2.16.4
Git 2.15.2
Git 2.14.4
Git 2.13.7
fsck: complain when .gitmodules is a symlink
index-pack: check .gitmodules files with --strict
unpack-objects: call fsck_finish() after fscking objects
fsck: call fsck_finish() after fscking objects
fsck: check .gitmodules content
fsck: handle promisor objects in .gitmodules check
fsck: detect gitmodules files
fsck: actually fsck blob data
fsck: simplify ".git" check
index-pack: make fsck error message more specific
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
...
|
|
Doc update.
* nd/pack-unreachable-objects-doc:
pack-objects: validation and documentation about unreachable options
|
|
"git status" learned to pay attention to UI related diff
configuration variables such as diff.renames.
* em/status-rename-config:
wt-status: use settings from git_diff_ui_config
|
|
"git format-patch --cover --attach" created a broken MIME multipart
message for the cover letter, which has been fixed by keeping the
cover letter as plain text file.
* bc/format-patch-cover-no-attach:
format-patch: make cover letters always text/plain
|
|
"git rebase" learned "--rebase-merges" to transplant the whole
topology of commit graph elsewhere.
* js/rebase-recreate-merge:
rebase -i --rebase-merges: add a section to the man page
rebase -i: introduce --rebase-merges=[no-]rebase-cousins
pull: accept --rebase=merges to recreate the branch topology
rebase --rebase-merges: avoid "empty merges"
sequencer: handle post-rewrite for merge commands
sequencer: make refs generated by the `label` command worktree-local
rebase --rebase-merges: add test for --keep-empty
rebase: introduce the --rebase-merges option
rebase-helper --make-script: introduce a flag to rebase merges
sequencer: fast-forward `merge` commands, if possible
sequencer: introduce the `merge` command
sequencer: introduce new commands to reset the revision
git-rebase--interactive: clarify arguments
sequencer: offer helpful advice when a command was rescheduled
sequencer: refactor how original todo list lines are accessed
sequencer: make rearrange_squash() a bit more obvious
sequencer: avoid using errno clobbered by rollback_lock_file()
|
|
"git pack-objects" needs to allocate tons of "struct object_entry"
while doing its work, and shrinking its size helps the performance
quite a bit.
* nd/pack-objects-pack-struct:
ci: exercise the whole test suite with uncommon code in pack-objects
pack-objects: reorder members to shrink struct object_entry
pack-objects: shrink delta_size field in struct object_entry
pack-objects: shrink size field in struct object_entry
pack-objects: clarify the use of object_entry::size
pack-objects: don't check size when the object is bad
pack-objects: shrink z_delta_size field in struct object_entry
pack-objects: refer to delta objects by index instead of pointer
pack-objects: move in_pack out of struct object_entry
pack-objects: move in_pack_pos out of struct object_entry
pack-objects: use bitfield for object_entry::depth
pack-objects: use bitfield for object_entry::dfs_state
pack-objects: turn type and in_pack_type to bitfields
pack-objects: a bit of document about struct object_entry
read-cache.c: make $GIT_TEST_SPLIT_INDEX boolean
|
|
"git worktree add" learned to check out an existing branch.
* tg/worktree-add-existing-branch:
worktree: teach "add" to check out existing branches
worktree: factor out dwim_branch function
worktree: improve message when creating a new worktree
worktree: remove extra members from struct add_opts
|
|
The functionality of "$GIT_DIR/info/grafts" has been superseded by
the "refs/replace/" mechanism for some time now, but the internal
code had support for it in many places, which has been cleaned up
in order to drop support of the "grafts" mechanism.
* js/deprecate-grafts:
Remove obsolete script to convert grafts to replace refs
technical/shallow: describe why shallow cannot use replace refs
technical/shallow: stop referring to grafts
filter-branch: stop suggesting to use grafts
Deprecate support for .git/info/grafts
Add a test for `git replace --convert-graft-file`
replace: introduce --convert-graft-file
replace: prepare create_graft() for converting graft files wholesale
replace: "libify" create_graft() and callees
replace: avoid using die() to indicate a bug
commit: Let the callback of for_each_mergetag return on error
argv_array: offer to split a string by whitespace
|
|
The codepath around object-info API has been taught to take the
repository object (which in turn tells the API which object store
the objects are to be located).
* sb/oid-object-info:
cache.h: allow oid_object_info to handle arbitrary repositories
packfile: add repository argument to cache_or_unpack_entry
packfile: add repository argument to unpack_entry
packfile: add repository argument to read_object
packfile: add repository argument to packed_object_info
packfile: add repository argument to packed_to_object_type
packfile: add repository argument to retry_bad_packed_offset
cache.h: add repository argument to oid_object_info
cache.h: add repository argument to oid_object_info_extended
|
|
The transport protocol v2 is getting updated further.
* bw/server-options:
fetch: send server options when using protocol v2
ls-remote: send server options when using protocol v2
serve: introduce the server-option capability
|
|
"git gc" in a large repository takes a lot of time as it considers
to repack all objects into one pack by default. The command has
been taught to pretend as if the largest existing packfile is
marked with ".keep" so that it is left untouched while objects in
other packs and loose ones are repacked.
* nd/repack-keep-pack:
pack-objects: show some progress when counting kept objects
gc --auto: exclude base pack if not enough mem to "repack -ad"
gc: handle a corner case in gc.bigPackThreshold
gc: add gc.bigPackThreshold config
gc: add --keep-largest-pack option
repack: add --keep-pack option
t7700: have closing quote of a test at the beginning of line
|
|
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
|
|
The code did not propagate the terminal width to subprocesses via
COLUMNS environment variable, which it now does. This caused
trouble to "git column" helper subprocess when "git tag --column=row"
tried to list the existing tags on a display with non-default width.
* nd/term-columns:
column: fix off-by-one default width
pager: set COLUMNS to term_columns()
|
|
Now that the internal fsck code has all of the plumbing we
need, we can start checking incoming .gitmodules files.
Naively, it seems like we would just need to add a call to
fsck_finish() after we've processed all of the objects. And
that would be enough to cover the initial test included
here. But there are two extra bits:
1. We currently don't bother calling fsck_object() at all
for blobs, since it has traditionally been a noop. We'd
actually catch these blobs in fsck_finish() at the end,
but it's more efficient to check them when we already
have the object loaded in memory.
2. The second pass done by fsck_finish() needs to access
the objects, but we're actually indexing the pack in
this process. In theory we could give the fsck code a
special callback for accessing the in-pack data, but
it's actually quite tricky:
a. We don't have an internal efficient index mapping
oids to packfile offsets. We only generate it on
the fly as part of writing out the .idx file.
b. We'd still have to reconstruct deltas, which means
we'd basically have to replicate all of the
reading logic in packfile.c.
Instead, let's avoid running fsck_finish() until after
we've written out the .idx file, and then just add it
to our internal packed_git list.
This does mean that the objects are "in the repository"
before we finish our fsck checks. But unpack-objects
already exhibits this same behavior, and it's an
acceptable tradeoff here for the same reason: the
quarantine mechanism means that pushes will be
fully protected.
In addition to a basic push test in t7415, we add a sneaky
pack that reverses the usual object order in the pack,
requiring that index-pack access the tree and blob during
the "finish" step.
This already works for unpack-objects (since it will have
written out loose objects), but we'll check it with this
sneaky pack for good measure.
Signed-off-by: Jeff King <peff@peff.net>
|
|
As with the previous commit, we must call fsck's "finish"
function in order to catch any queued objects for
.gitmodules checks.
This second pass will be able to access any incoming
objects, because we will have exploded them to loose objects
by now.
This isn't quite ideal, because it means that bad objects
may have been written to the object database (and a
subsequent operation could then reference them, even if the
other side doesn't send the objects again). However, this is
sufficient when used with receive.fsckObjects, since those
loose objects will all be placed in a temporary quarantine
area that will get wiped if we find any problems.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Now that the internal fsck code is capable of checking
.gitmodules files, we just need to teach its callers to use
the "finish" function to check any queued objects.
With this, we can now catch the malicious case in t7415 with
git-fsck.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Because fscking a blob has always been a noop, we didn't
bother passing around the blob data. In preparation for
content-level checks, let's fix up a few things:
1. The fsck_object() function just returns success for any
blob. Let's a noop fsck_blob(), which we can fill in
with actual logic later.
2. The fsck_loose() function in builtin/fsck.c
just threw away blob content after loading it. Let's
hold onto it until after we've called fsck_object().
The easiest way to do this is to just drop the
parse_loose_object() helper entirely. Incidentally,
this also fixes a memory leak: if we successfully
loaded the object data but did not parse it, we would
have left the function without freeing it.
3. When fsck_loose() loads the object data, it
does so with a custom read_loose_object() helper. This
function streams any blobs, regardless of size, under
the assumption that we're only checking the sha1.
Instead, let's actually load blobs smaller than
big_file_threshold, as the normal object-reading
code-paths would do. This lets us fsck small files, and
a NULL return is an indication that the blob was so big
that it needed to be streamed, and we can pass that
information along to fsck_blob().
Signed-off-by: Jeff King <peff@peff.net>
|
|
If fsck reports an error, we say only "Error in object".
This isn't quite as bad as it might seem, since the fsck
code would have dumped some errors to stderr already. But it
might help to give a little more context. The earlier output
would not have even mentioned "fsck", and that may be a clue
that the "fsck.*" or "*.fsckObjects" config may be relevant.
Signed-off-by: Jeff King <peff@peff.net>
|
|
* jk/submodule-name-verify-fix:
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_path: drop clever fallthrough
skip_prefix: add icase-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
path: match NTFS short names for more .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
Note that this includes two bits of evil-merge:
- there's a new call to verify_path() that doesn't actually
have a mode available. It should be OK to pass "0" here,
since we're just manipulating the untracked cache, not an
actual index entry.
- the lstat() in builtin/update-index.c:update_one() needs
to be updated to handle the fsmonitor case (without this
it still behaves correctly, but does an unnecessary
lstat).
|
|
There are a few reasons it's not a good idea to make
.gitmodules a symlink, including:
1. It won't be portable to systems without symlinks.
2. It may behave inconsistently, since Git may look at
this file in the index or a tree without bothering to
resolve any symbolic links. We don't do this _yet_, but
the config infrastructure is there and it's planned for
the future.
With some clever code, we could make (2) work. And some
people may not care about (1) if they only work on one
platform. But there are a few security reasons to simply
disallow it:
a. A symlinked .gitmodules file may circumvent any fsck
checks of the content.
b. Git may read and write from the on-disk file without
sanity checking the symlink target. So for example, if
you link ".gitmodules" to "../oops" and run "git
submodule add", we'll write to the file "oops" outside
the repository.
Again, both of those are problems that _could_ be solved
with sufficient code, but given the complications in (1) and
(2), we're better off just outlawing it explicitly.
Note the slightly tricky call to verify_path() in
update-index's update_one(). There we may not have a mode if
we're not updating from the filesystem (e.g., we might just
be removing the file). Passing "0" as the mode there works
fine; since it's not a symlink, we'll just skip the extra
checks.
Signed-off-by: Jeff King <peff@peff.net>
|
|
In the update_one(), we check verify_path() on the proposed
path before doing anything else. In preparation for having
verify_path() look at the file mode, let's stat the file
earlier, so we can check the mode accurately.
This is made a bit trickier by the fact that this function
only does an lstat in a few code paths (the ones that flow
down through process_path()). So we can speculatively do the
lstat() here and pass the results down, and just use a dummy
mode for cases where we won't actually be updating the index
from the filesystem.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Submodule "names" come from the untrusted .gitmodules file,
but we blindly append them to $GIT_DIR/modules to create our
on-disk repo paths. This means you can do bad things by
putting "../" into the name (among other things).
Let's sanity-check these names to avoid building a path that
can be exploited. There are two main decisions:
1. What should the allowed syntax be?
It's tempting to reuse verify_path(), since submodule
names typically come from in-repo paths. But there are
two reasons not to:
a. It's technically more strict than what we need, as
we really care only about breaking out of the
$GIT_DIR/modules/ hierarchy. E.g., having a
submodule named "foo/.git" isn't actually
dangerous, and it's possible that somebody has
manually given such a funny name.
b. Since we'll eventually use this checking logic in
fsck to prevent downstream repositories, it should
be consistent across platforms. Because
verify_path() relies on is_dir_sep(), it wouldn't
block "foo\..\bar" on a non-Windows machine.
2. Where should we enforce it? These days most of the
.gitmodules reads go through submodule-config.c, so
I've put it there in the reading step. That should
cover all of the C code.
We also construct the name for "git submodule add"
inside the git-submodule.sh script. This is probably
not a big deal for security since the name is coming
from the user anyway, but it would be polite to remind
them if the name they pick is invalid (and we need to
expose the name-checker to the shell anyway for our
test scripts).
This patch issues a warning when reading .gitmodules
and just ignores the related config entry completely.
This will generally end up producing a sensible error,
as it works the same as a .gitmodules file which is
missing a submodule entry (so "submodule update" will
barf, but "git clone --recurse-submodules" will print
an error but not abort the clone.
There is one minor oddity, which is that we print the
warning once per malformed config key (since that's how
the config subsystem gives us the entries). So in the
new test, for example, the user would see three
warnings. That's OK, since the intent is that this case
should never come up outside of malicious repositories
(and then it might even benefit the user to see the
message multiple times).
Credit for finding this vulnerability and the proof of
concept from which the test script was adapted goes to
Etienne Stalmans.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add --dissociate option to add and update commands, both clone helper commands
that already have the --reference option --dissociate pairs with.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you run "config --blob" outside of a repository, then we
eventually try to resolve the blob name and hit a BUG().
Let's catch this earlier and provide a useful message.
Note that we could also catch this much lower in the stack,
in git_config_from_blob_ref(). That might cover other
callsites, too, but it's unclear whether those ones would
actually be bugs or not. So let's leave the low-level
functions to assume the caller knows what it's doing (and
BUG() if it turns out it doesn't).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach fetch to generate ref-prefixes, to be used for server-side
filtering of the ref-advertisement, based on the configured fetch
refspec ('remote.<name>.fetch') when no user provided refspec exists.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using protocol v2 a client constructs a list of ref-prefixes which
are sent across the wire so that the server can do server-side filtering
of the ref-advertisement. The logic that does this exists for both
fetch and push (even though no push support for v2 currently exists yet)
and is roughly the same so lets consolidate this logic and make it
general enough that it can be used for both the push and fetch cases.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'match_push_refs()' to take a 'struct refspec' as a parameter
instead of an array of 'const char *'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove 'transprot_verify_remote_names()' because all callers have
migrated to using 'struct refspec' which performs the same checks in
'parse_refspec()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert send-pack.c to store refspecs in a 'struct refspec' instead of
as an array of 'const char *'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'transport_push()' to take a 'struct refspec' as a
parameter instead of an array of strings which represent
refspecs.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the refspecs in builtin/push.c to be stored in a 'struct
refspec' instead of being stored in a list of 'struct refspec_item's.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the error checking for using the "--mirror", "--all", and "--tags"
options earlier and explicitly check for the presence of the flags
instead of checking for a side-effect of the flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'query_refspecs()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'apply_refspecs()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'get_stale_heads()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'prune_refs()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'get_ref_map()' to take a 'struct refspec' as a parameter
instead of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'do_fetch()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the refmap in builtin/fetch.c to be stored in a
'struct refspec'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'fetch_one()' to use 'struct refspec'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Casey Fitzpatrick
Brandon Williams