| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code simplification by removing support for a caller that is long gone.
* ab/read-tree:
tree.h API: simplify read_tree_recursive() signature
tree.h API: expose read_tree_1() as read_tree_at()
archive: stop passing "stage" through read_tree_recursive()
ls-files: refactor away read_tree()
ls-files: don't needlessly pass around stage variable
tree.c API: move read_tree() into builtin/ls-files.c
ls-files tests: add meaningful --with-tree tests
show tests: add test for "git show <tree>"
|
|
"git commit --fixup=<commit>", which was to tweak the changes made
to the contents while keeping the original log message intact,
learned "--fixup=(amend|reword):<commit>", that can be used to
tweak both the message and the contents, and only the message,
respectively.
* cm/rebase-i-fixup-amend-reword:
doc/git-commit: add documentation for fixup=[amend|reword] options
t3437: use --fixup with options to create amend! commit
t7500: add tests for --fixup=[amend|reword] options
commit: add a reword suboption to --fixup
commit: add amend suboption to --fixup to create amend! commit
sequencer: export and rename subject_length()
|
|
"git repack" so far has been only capable of repacking everything
under the sun into a single pack (or split by size). A cleverer
strategy to reduce the cost of repacking a repository has been
introduced.
* tb/geometric-repack:
builtin/pack-objects.c: ignore missing links with --stdin-packs
builtin/repack.c: reword comment around pack-objects flags
builtin/repack.c: be more conservative with unsigned overflows
builtin/repack.c: assign pack split later
t7703: test --geometric repack with loose objects
builtin/repack.c: do not repack single packs with --geometric
builtin/repack.c: add '--geometric' option
packfile: add kept-pack cache for find_kept_pack_entry()
builtin/pack-objects.c: rewrite honor-pack-keep logic
p5303: measure time to repack with keep
p5303: add missing &&-chains
builtin/pack-objects.c: add '--stdin-packs' option
revision: learn '--no-kept-objects'
packfile: introduce 'find_kept_pack_entry()'
|
|
"git -c core.bare=false clone --bare ..." would have segfaulted,
which has been corrected.
* bc/clone-bare-with-conflicting-config:
builtin/init-db: handle bare clones when core.bare set to false
|
|
"git stash show" learned to optionally show untracked part of the
stash.
* dl/stash-show-untracked:
stash show: learn stash.showIncludeUntracked
stash show: teach --include-untracked and --only-untracked
|
|
Updates to memory allocation code around the use of pcre2 library.
* ab/grep-pcre2-allocfix:
grep/pcre2: move definitions of pcre2_{malloc,free}
grep/pcre2: move back to thread-only PCREv2 structures
grep/pcre2: actually make pcre2 use custom allocator
grep/pcre2: use pcre2_maketables_free() function
grep/pcre2: use compile-time PCREv2 version test
grep/pcre2: add GREP_PCRE2_DEBUG_MALLOC debug mode
grep/pcre2: prepare to add debugging to pcre2_malloc()
grep/pcre2: correct reference to grep_init() in comment
grep/pcre2: drop needless assignment to NULL
grep/pcre2: drop needless assignment + assert() on opt->pcre2
|
|
Update C code that sets a few configuration variables when a remote
is configured so that it spells configuration variable names in the
canonical camelCase.
* ab/remote-write-config-in-camel-case:
remote: write camel-cased *.pushRemote on rename
remote: add camel-cased *.tagOpt key, like clone
|
|
It does not make sense to make ".gitattributes", ".gitignore" and
".mailmap" symlinks, as they are supposed to be usable from the
object store (think: bare repositories where HEAD:.mailmap etc. are
used). When these files are symbolic links, we used to read the
contents of the files pointed by them by mistake, which has been
corrected.
* jk/open-dotgitx-with-nofollow:
mailmap: do not respect symlinks for in-tree .mailmap
exclude: do not respect symlinks for in-tree .gitignore
attr: do not respect symlinks for in-tree .gitattributes
exclude: add flags parameter to add_patterns()
attr: convert "macro_ok" into a flags field
add open_nofollow() helper
|
|
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d5 (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor away the read_tree() function into its only user,
overlay_tree_on_index().
First, change read_one_entry_opt() to use the strbuf parameter
read_tree_recursive() passes down in place. This finishes up a partial
refactoring started in 6a0b0b6de99 (tree.c: update read_tree_recursive
callback to pass strbuf as base, 2014-11-30).
Moving the rest into overlay_tree_on_index() makes this index juggling
we're doing easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that read_tree() has been moved to ls-files.c we can get rid of
the stage != 1 case that'll never happen.
Let's not use read_tree_recursive() as a pass-through to pass "stage =
1" either. For now we'll pass an unused "stage = 0" for consistency
with other read_tree_recursive() callers, that argument will be
removed in a follow-up commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the read_tree() API was added around the same time as
read_tree_recursive() in 94537c78a82 (Move "read_tree()" to
"tree.c"[...], 2005-04-22) and b12ec373b8e ([PATCH] Teach read-tree
about commit objects, 2005-04-20) things have gradually migrated over
to the read_tree_recursive() version.
Now builtin/ls-files.c is the last user of this code, let's move all
the relevant code there. This allows for subsequent simplification of
it, and an eventual move to read_tree_recursive().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a corner case bug in "git mv" on case insensitive systems,
which was introduced in 2.29 timeframe.
* tb/git-mv-icase-fix:
git mv foo FOO ; git mv foo bar gave an assert
|
|
CALLOC_ARRAY() macro replaces many uses of xcalloc().
* rs/calloc-array:
cocci: allow xcalloc(1, size)
use CALLOC_ARRAY
git-compat-util.h: drop trailing semicolon from macro definition
|
|
"git bisect" reimplemented more in C during 2.30 timeframe did not
take an annotated tag as a good/bad endpoint well. This regression
has been corrected.
* jk/bisect-peel-tag-fix:
bisect: peel annotated tags to commits
|
|
Code clean-up.
* jc/calloc-fix:
xcalloc: use CALLOC_ARRAY() when applicable
|
|
When 'git pack-objects --stdin-packs' encounters a commit in a pack, it
marks it as a starting point of a best-effort reachability traversal
that is used to populate the name-hash of the objects listed in the
given packs.
The traversal expects that it should be able to walk the ancestors of
all commits in a pack without issue. Ordinarily this is the case, but it
is possible to having missing parents from an unreachable part of the
repository. In that case, we'd consider any missing objects in the
unreachable portion of the graph to be junk.
This should be handled gracefully: since the traversal is best-effort
(i.e., we don't strictly need to fill in all of the name-hash fields),
we should simply ignore any missing links.
This patch does that (by setting the 'ignore_missing_links' bit on the
rev_info struct), and ensures we don't regress in the future by adding a
test which demonstrates this case.
It is a little over-eager, since it will also ignore missing links in
reachable parts of the packs (which would indicate a corrupted
repository), but '--stdin-packs' is explicitly *not* about reachability.
So this step isn't making anything worse for a repository which contains
packs missing reachable objects (since we never drop objects with
'--stdin-packs').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch fixes a bug where git-bisect doesn't handle receiving
annotated tags as "git bisect good <tag>", etc. It's a regression in
27257bc466 (bisect--helper: reimplement `bisect_state` & `bisect_head`
shell functions in C, 2020-10-15).
The original shell code called:
sha=$(git rev-parse --verify "$rev^{commit}") ||
die "$(eval_gettext "Bad rev input: \$rev")"
which will peel the input to a commit (or complain if that's not
possible). But the C code just calls get_oid(), which will yield the oid
of the tag.
The fix is to peel to a commit. The error message here is a little
non-idiomatic for Git (since it starts with a capital). I've mostly left
it, as it matches the other converted messages (like the "Bad rev input"
we print when get_oid() fails), though I did add an indication that it
was the peeling that was the problem. It might be worth taking a pass
through this converted code to modernize some of the error messages.
Note also that the test does a bare "grep" (not i18ngrep) on the
expected "X is the first bad commit" output message. This matches the
rest of the test script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are for codebase before Git 2.31
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git commit --fixup=reword:<commit>` aliases
`--fixup=amend:<commit> --only`, where it creates an empty "amend!"
commit that will reword <commit> without changing its contents when
it is rebased with `--autosquash`.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git commit --fixup=amend:<commit>` will create an "amend!" commit.
The resulting commit message subject will be "amend! ..." where
"..." is the subject line of <commit> and the initial message
body will be <commit>'s message.
The "amend!" commit when rebased with --autosquash will fixup the
contents and replace the commit message of <commit> with the
"amend!" commit's message body.
In order to prevent rebase from creating commits with an empty
message we refuse to create an "amend!" commit if commit message
body is empty.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 552955ed7f ("clone: use more conventional config/option layering",
2020-10-01), clone learned to read configuration options earlier in its
execution, before creating the new repository. However, that led to a
problem: if the core.bare setting is set to false in the global config,
cloning a bare repository segfaults. This happens because the
repository is falsely thought to be non-bare, but clone has set the work
tree to NULL, which is then dereferenced.
The code to initialize the repository already considers the fact that a
user might want to override the --bare option for git init, but it
doesn't take into account clone, which uses a different option. Let's
just check that the work tree is not NULL, since that's how clone
indicates that the repository is bare. This is also the case for git
init, so we won't be regressing that case.
Reported-by: Joseph Vusich <jvusich@amazon.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit teaches `git stash show --include-untracked`. It
may be desirable for a user to be able to always enable the
--include-untracked behavior. Teach the stash.showIncludeUntracked
config option which allows users to do this in a similar manner to
stash.showPatch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stash entries can be made with untracked files via
`git stash push --include-untracked`. However, because the untracked
files are stored in the third parent of the stash entry and not the
stash entry itself, running `git stash show` does not include the
untracked files as part of the diff.
With --include-untracked, untracked paths, which are recorded in the
third-parent if it exists, are shown in addition to the paths that have
modifications between the stash base and the working tree in the stash.
It is possible to manually craft a malformed stash entry where duplicate
untracked files in the stash entry will mask tracked files. We detect
and error out in that case via a custom unpack_trees() callback:
stash_worktree_untracked_merge().
Also, teach stash the --only-untracked option which only shows the
untracked files of a stash entry. This is similar to `git show stash^3`
but it is nice to provide a convenient abstraction for it so that users
do not have to think about the underlying implementation.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comment in this block is meant to indicate that passing '--all',
'--reflog', and so on aren't necessary when repacking with the
'--geometric' option.
But, it has two problems: first, it is factually incorrect ('--all' is
*not* incompatible with '--stdin-packs' as the comment suggests);
second, it is quite focused on the geometric case for a block that is
guarding against it.
Reword this comment to address both issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a number of places in the geometric repack code where we
multiply the number of objects in a pack by another unsigned value. We
trust that the number of objects in a pack is always representable by a
uint32_t, but we don't necessarily trust that that number can be
multiplied without overflow.
Sprinkle some unsigned_add_overflows() and unsigned_mult_overflows() in
split_pack_geometry() to check that we never overflow any unsigned types
when adding or multiplying them.
Arguably these checks are a little too conservative, and certainly they
do not help the readability of this function. But they are serving a
useful purpose, so I think they are worthwhile overall.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To determine the where to place the split when repacking with the
'--geometric' option, split_pack_geometry() assigns the "split" variable
and then decrements it in a loop.
It would be equivalent (and more readable) to assign the split to the
loop position after exiting the loop, so do that instead.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 0fabafd0b9 (builtin/repack.c: add '--geometric' option, 2021-02-22),
the 'git repack --geometric' code aborts early when there is zero or one
pack.
When there are no packs, this code does the right thing by placing the
split at "0". But when there is exactly one pack, the split is placed at
"1", which means that "git repack --geometric" (with any factor)
repacks all of the objects in a single pack.
This is wasteful, and the remaining code in split_pack_geometry() does
the right thing (not repacking the objects in a single pack) even when
only one pack is present.
Loosen the guard to only stop when there aren't any packs, and let the
rest of the code do the right thing. Add a test to ensure that this is
the case.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The following sequence, on a case-insensitive file system,
(strictly speeking with core.ignorecase=true)
leads to an assertion failure and leaves .git/index.lock behind.
git init
echo foo >foo
git add foo
git mv foo FOO
git mv foo bar
This regression was introduced in Commit 9b906af657,
"git-mv: improve error message for conflicted file"
The bugfix is to change the "file exist case-insensitive in the index"
into the correct "file exist (case-sensitive) in the index".
This avoids the "assert" later in the code and keeps setting up the
"ce" pointer for ce_stage(ce) done in the next else if.
This fixes
https://github.com/git-for-windows/git/issues/2920
Reported-By: Dan Moseley <Dan.Moseley@microsoft.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
|
|
"git push $there --delete ''" should have been diagnosed as an
error, but instead turned into a matching push, which has been
corrected.
* jc/push-delete-nothing:
push: do not turn --delete '' into a matching push
|
|
Messages update.
* js/params-vs-args:
replace "parameters" by "arguments" in error messages
|
|
The "git maintenance register" command had trouble registering bare
repositories, which had been corrected.
* es/maintenance-of-bare-repositories:
maintenance: fix incorrect `maintenance.repo` path with bare repository
|
|
Various fixes on "git add --chmod".
* mt/add-chmod-fixes:
add: propagate --chmod errors to exit status
add: mark --chmod error string for translation
add --chmod: don't update index when --dry-run is used
|
|
"git rebase --[no-]fork-point" gained a configuration variable
rebase.forkPoint so that users do not have to keep specifying a
non-default setting.
* ah/rebase-no-fork-point-config:
rebase: add a config option for --no-fork-point
|
|
"git grep" has been tweaked to be limited to the sparse checkout
paths.
* mt/grep-sparse-checkout:
grep: honor sparse-checkout on working tree searches
|
|
"git {diff,log} --{skip,rotate}-to=<path>" allows the user to
discard diff output for early paths or move them to the end of the
output.
* jc/diffcore-rotate:
diff: --{rotate,skip}-to=<path>
|
|
The error codepath around the "--temp/--prefix" feature of "git
checkout-index" has been improved.
* mt/checkout-index-corner-cases:
checkout-index: omit entries with no tempname from --temp output
write_entry(): fix misuses of `path` in error messages
|
|
Optimization in "git blame"
* rs/blame-optim:
blame: remove unnecessary use of get_commit_info()
|
|
"git rev-list" command learned "--disk-usage" option.
* jk/rev-list-disk-usage:
docs/rev-list: add some examples of --disk-usage
docs/rev-list: add an examples section
rev-list: add --disk-usage option for calculating disk usage
t: add --no-tag option to test_commit
|
|
When a remote is renamed don't change the canonical "*.pushRemote"
form to "*.pushremote". Fixes and tests for a minor bug in
923d4a5ca4f (remote rename/remove: handle branch.<name>.pushRemote
config values, 2020-01-27). See the preceding commit for why this does
& doesn't matter.
While we're at it let's also test that we handle the "*.pushDefault"
key correctly. The code to handle that was added in
b3fd6cbf294 (remote rename/remove: gently handle remote.pushDefault
config, 2020-02-01) and does the right thing, but nothing tested that
we wrote out the canonical camel-cased form.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change "git remote add" so that it adds a *.tagOpt key, and not the
lower-cased *.tagopt on "git remote add --no-tags", just as "git clone
--no-tags" would do.
This doesn't matter for anything that reads the config. It's just
prettier if we write config keys in their documented camelCase form to
user-readable config files.
When I added support for "clone -no-tags" in 0dab2468ee5 (clone: add a
--no-tags option to clone without tags, 2017-04-26) I made it use
the *.tagOpt form, but the older "git remote add" added in
111fb858654 (remote add: add a --[no-]tags option, 2010-04-20) has
been using *.tagopt all this time.
It's easy enough to add a test for this, so let's do that. We can't
use "git config -l" there, because it'll normalize the keys to their
lower-cased form. Let's add the test for "git clone" too for good
measure, not just to the "git remote" codepath we're fixing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `add` encounters an error while applying the --chmod changes, it
prints a message to stderr, but exits with a success code. This might
have been an oversight, as the command does exit with a non-zero code in
other situations where it cannot (or refuses to) update all of the
requested paths (e.g. when some of the given paths are ignored). So make
the exit behavior more consistent by also propagating --chmod errors to
the exit status.
Note: the test "all statuses changed in folder if . is given" uses paths
added by previous test cases, some of which might be symbolic links.
Because `git add --chmod` will now fail with such paths, this test would
depend on whether all the previous tests were executed, or only some
of them. Avoid that by running the test on a fresh repo with only
regular files.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This error message is intended for humans, so mark it for translation.
Also use error() instead of fprintf(stderr, ...), to make the
corresponding line a bit cleaner, and to display the "error:" prefix,
which helps classifying the nature/severity of the message.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git add --chmod` applies the mode changes even when `--dry-run` is
used. Fix that and add some tests for this option combination.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users (myself included) would prefer to have this feature off by
default because it can silently drop commits.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we added a syntax sugar "git push remote --delete <ref>" to
"git push" as a synonym to the canonical "git push remote :<ref>"
syntax at f517f1f2 (builtin-push: add --delete as syntactic sugar
for :foo, 2009-12-30), we weren't careful enough to make sure that
<ref> is not empty.
Blindly rewriting "--delete <ref>" to ":<ref>" means that an empty
string <ref> results in refspec ":", which is the syntax to ask for
"matching" push that does not delete anything.
Worse yet, if there were matching refs that can be fast-forwarded,
they would have been published prematurely, even if the user feels
that they are not ready yet to be pushed out, which would be a real
disaster.
Noticed-by: Tilman Vogel <tilman.vogel@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an error message informs the user about an incorrect command
invocation, it should refer to "arguments", not "parameters".
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The periodic maintenance tasks configured by `git maintenance start`
invoke `git for-each-repo` to run `git maintenance run` on each path
specified by the multi-value global configuration variable
`maintenance.repo`. Because `git for-each-repo` will likely be run
outside of the repositories which require periodic maintenance, it is
mandatory that the repository paths specified by `maintenance.repo` are
absolute.
Unfortunately, however, `git maintenance register` does nothing to
ensure that the paths it assigns to `maintenance.repo` are indeed
absolute, and may in fact -- especially in the case of a bare repository
-- assign a relative path to `maintenance.repo` instead. Fix this
problem by converting all paths to absolute before assigning them to
`maintenance.repo`.
While at it, also fix `git maintenance unregister` to convert paths to
absolute, as well, in order to ensure that it can correctly remove from
`maintenance.repo` a path assigned via `git maintenance register`.
Reported-by: Clement Moyroud <clement.moyroud@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Taylor Blau
Jeff King
Charvi Mendiratta
René Scharfe
brian m. carlson
Denton Liu
Torsten Bögershausen
Matheus Tavares
Alex Henrie
Johannes Sixt
Eric Sunshine