| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "--push-option=<string>" option to "git push" now defaults to a
list of strings configured via push.pushOption variable.
* mp/push-pushoption-config:
builtin/push.c: add push.pushOption config
|
|
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
|
|
"git pull" has been taught to accept "--[no-]signoff" option and
pass it down to "git merge".
* wk/pull-signoff:
pull: pass --signoff/--no-signoff to "git merge"
|
|
GSoC.
* pc/submodule-helper:
submodule: port submodule subcommand 'status' from shell to C
submodule--helper: introduce for_each_listed_submodule()
submodule--helper: introduce get_submodule_displaypath()
|
|
An early part of piece-by-piece rewrite of "git bisect".
* pb/bisect-helper:
bisect--helper: `is_expected_rev` & `check_expected_revs` shell function in C
t6030: explicitly test for bisection cleanup
bisect--helper: `bisect_clean_state` shell function in C
bisect--helper: `write_terms` shell function in C
bisect--helper: rewrite `check_term_format` shell function in C
bisect--helper: use OPT_CMDMODE instead of OPT_BOOL
|
|
A broken access to object databases in recent update to "git grep
--recurse-submodules" has been fixed.
* bw/grep-recurse-submodules:
grep: take the read-lock when adding a submodule
|
|
"git commit", after making a commit, did not check for errors when
asking on what branch it made the commit, which has been correted.
* ao/check-resolve-ref-unsafe-result:
commit: check result of resolve_ref_unsafe
|
|
Some codepaths did not check for errors when asking what branch the
HEAD points at, which have been fixed.
* jk/misc-resolve-ref-unsafe-fixes:
worktree: handle broken symrefs in find_shared_symref()
log: handle broken HEAD in decoration check
remote: handle broken symrefs
test-ref-store: avoid passing NULL to printf
|
|
Calling cmd_foo() as if it is a general purpose helper function is
a no-no. Correct two instances of such to set an example.
* jc/no-cmd-as-subroutine:
merge-ours: do not use cmd_*() as a subroutine
describe: do not use cmd_*() as a subroutine
|
|
An earlier update made it possible to use an on-stack in-core
lockfile structure (as opposed to having to deliberately leak an
on-heap one). Many codepaths have been updated to take advantage
of this new facility.
* ma/lockfile-fixes:
read_cache: roll back lock in `update_index_if_able()`
read-cache: leave lock in right state in `write_locked_index()`
read-cache: drop explicit `CLOSE_LOCK`-flag
cache.h: document `write_locked_index()`
apply: remove `newfd` from `struct apply_state`
apply: move lockfile into `apply_state`
cache-tree: simplify locking logic
checkout-index: simplify locking logic
tempfile: fix documentation on `delete_tempfile()`
lockfile: fix documentation on `close_lock_file_gently()`
treewide: prefer lockfiles on the stack
sha1_file: do not leak `lock_file`
|
|
With --recurse-submodules, we add each submodule that we encounter to
the list of alternate object databases. With threading, our changes to
the list are not protected against races. Indeed, ThreadSanitizer
reports a race when we call `add_to_alternates_memory()` around the same
time that another thread is reading in the list through
`read_sha1_file()`.
Take the grep read-lock while adding the submodule. The lock is used to
serialize uses of non-thread-safe parts of Git's API, including
`read_sha1_file()`.
Helped-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Push options need to be given explicitly, via the command line as "git
push --push-option <option>". Add the config option push.pushOption,
which is a multi-valued option, containing push options that are sent
by default.
When push options are set in the lower-priority configulation file
(e.g. /etc/gitconfig, or $HOME/.gitconfig), they can be unset later in
the more specific repository config by the empty string.
Add tests and update documentation as well.
Signed-off-by: Marius Paliga <marius.paliga@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's possible for resolve_ref_unsafe() to return NULL with a
REF_ISSYMREF flag if a symref points to a broken ref. In
this case, the read_remote_branches() function will segfault
passing the name to xstrdup().
This is hard to trigger in practice, since this function is
used as a callback to for_each_ref(), which will skip broken
refs in the first place (so it would have to be broken
racily, or for us to see a transient filesystem error).
If we see such a racy broken outcome let's treat it as "not
a symref". This is exactly the same thing that would happen
in the non-racy case (our function would not be called at
all, as for_each_ref would skip the broken symref).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add check of the resolved HEAD reference while printing of a commit summary.
resolve_ref_unsafe() may return NULL pointer if underlying calls of lstat() or
open() fail in files_read_raw_ref().
Such situation can be caused by race: file becomes inaccessible to this moment.
Signed-off-by: Andrey Okoshkin <a.okoshkin@samsung.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
|
|
* sb/branch-avoid-repeated-strbuf-release:
branch: reset instead of release a strbuf
|
|
A mismerge fix.
* mg/timestamp-t-fix:
name-rev: change ULONG_MAX to TIME_MAX
|
|
"git cat-file --textconv" started segfaulting recently, which
has been corrected.
* jk/diff-blob:
cat-file: handle NULL object_context.path
|
|
"git describe --match" learned to take multiple patterns in v2.13
series, but the feature ignored the patterns after the first one
and did not work at all. This has been fixed.
* jk/describe-omit-some-refs:
describe: fix matching to actually match all patterns
|
|
"git gc" tries to avoid running two instances at the same time by
reading and writing pid/host from and to a lock file; it used to
use an incorrect fscanf() format when reading, which has been
corrected.
* aw/gc-lockfile-fscanf-fix:
gc: call fscanf() with %<len>s, not %<len>c, when reading hostname
|
|
Unlike "git commit-tree < file", "git commit-tree -F file" did not
pass the contents of the file verbatim and instead completed an
incomplete line at the end, if exists. The latter has been updated
to match the behaviour of the former.
* rk/commit-tree-make-F-verbatim:
commit-tree: do not complete line in -F input
|
|
Fix regression to "gitk --bisect" by a recent update.
* mh/packed-ref-store-prep:
rev-parse: don't trim bisect refnames
|
|
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
|
|
The expansion returned from strbuf_check_branch_ref always starts with
"refs/heads/" by construction, but there is nothing about its name or
advertised API making that obvious. This command is used to process
human-supplied input from the command line and is usually not the
inner loop, so we can spare some cycles to be more defensive. Instead
of hard-coding the offset strlen("refs/heads/") to skip, verify that
the expansion actually starts with refs/heads/.
[jn: split out from a larger patch, added explanation]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 11b087adfd (ref-filter: consult want_color() before
emitting colors, 2017-07-13), we expect that setting
"color.ui" to "always" will enable color tag formats even
without a tty. As that commit was built on top of
136c8c8b8f (color: check color.ui in git_default_config(),
2017-07-13) from the same series, we didn't need to touch
tag's config parsing at all.
However, since we reverted 136c8c8b8f, we now need to
explicitly call git_color_default_config() to make this
work.
Let's do so, and also restore the test dropped in 0c88bf5050
(provide --color option for all ref-filter users,
2017-10-03). That commit swapped out our "color.ui=always"
test for "--color" in preparation for "always" going away.
But since it is here to stay, we should test both cases.
Note that for-each-ref also lost its color.ui support as
part of reverting 136c8c8b8f. But as a plumbing command, it
should _not_ respect the color.ui config. Since it also
gained a --color option in 0c88bf5050, that's the correct
way to ask it for color. We'll continue to test that, and
confirm that "color.ui" is not respected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 136c8c8b8fa39f1315713248473dececf20f8fe7.
That commit was trying to address a bug caused by 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10), in which
plumbing like diff-tree defaulted to "auto" color, but did
not respect a "color.ui" directive to disable it.
But it also meant that we started respecting "color.ui" set
to "always". This was a known problem, but 4c7f1819b3 argued
that nobody ought to be doing that. However, that turned out
to be wrong, and we got a number of bug reports related to
"add -p" regressing in v2.14.2.
Let's revert 136c8c8b8, fixing the regression to "add -p".
This leaves the problem from 4c7f1819b3 unfixed, but:
1. It's a pretty obscure problem in the first place. I
only noticed it while working on the color code, and we
haven't got a single bug report or complaint about it.
2. We can make a more moderate fix on top by respecting
"never" but not "always" for plumbing commands. This
is just the minimal fix to go back to the working state
we had before v2.14.2.
Note that this isn't a pure revert. We now have a test in
t3701 which shows off the "add -p" regression. This can be
flipped to success.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
jk/ref-filter-colors-fix-maint
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
|
|
Convert resolve_ref_unsafe to take a pointer to struct object_id by
converting one remaining caller to use struct object_id, removing the
temporary NULL pointer check in expand_ref, converting the declaration
and definition, and applying the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3.hash, E4)
+ resolve_ref_unsafe(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_ref_unsafe(E1, E2, E3->hash, E4)
+ resolve_ref_unsafe(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the head_sha1 member to be head_oid instead. This is required
to convert resolve_ref_unsafe.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the declaration and definition of resolve_gitlink_ref to use
struct object_id and apply the following semantic patch:
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3.hash)
+ resolve_gitlink_ref(E1, E2, &E3)
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3->hash)
+ resolve_gitlink_ref(E1, E2, E3)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
reflog_expire already used struct object_id internally, but it did not
take it as a parameter. Adjust the parameter (and the callers) to pass
a pointer to struct object_id instead of a pointer to unsigned char.
Remove the temporary inserted earlier as it is no longer required.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the callers and internals, including struct read_ref_at_cb, of
read_ref_at to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert peel_ref (and its corresponding backend) to struct object_id.
This transformation was done with an update to the declaration,
definition, comments, and test helper and the following semantic patch:
@@
expression E1, E2;
@@
- peel_ref(E1, E2.hash)
+ peel_ref(E1, &E2)
@@
expression E1, E2;
@@
- peel_ref(E1, E2->hash)
+ peel_ref(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is one of the last unconverted callers to peel_ref. While we're
fixing that, convert the rest of the file, since it will need to be
converted at some point anyway.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert traverse_bitmap_commit_list and the callbacks it takes to use a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the remaining uses of unsigned char [20] to struct object_id.
This conversion is needed for dwim_log.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the callers of these functions just pass the hash member of a
struct object_id, so convert them to use a pointer to struct object_id
directly. Insert a check for NULL in expand_ref on a temporary basis;
this check can be removed when resolve_ref_unsafe is converted as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All but two of the call sites already have parameters using the hash
parameter of struct object_id, so convert them to take a pointer to the
struct directly. Also convert refs_read_refs_full, the underlying
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the callers already pass the hash member of struct object_id, so
update them to pass a pointer to the struct directly,
This transformation was done with an update to declaration and
definition and the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3.hash, E4)
+ resolve_refdup(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3->hash, E4)
+ resolve_refdup(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert check_connected and the callbacks it takes to use struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the ref transaction code to use struct object_id. Remove one
NULL pointer check which was previously inserted around a dereference;
since we now pass a pointer to struct object_id directly through, the
code we're calling handles this for us.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert delete_ref and refs_delete_ref to take a pointer to struct
object_id. Update the documentation accordingly, including referring to
null_oid in lowercase, as it is not a #define constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge can take --signoff, but without pull passing --signoff down, it
is inconvenient to use; allow 'pull' to take the option and pass it
through.
The order of options in merge-options.txt is mostly alphabetical by
long option since 7c85d274 (Documentation/merge-options.txt: order
options in alphabetical groups, 2009-10-22). The long-option bit
didn't make it into the commit message, but it's under the fold in
[1]. I've put --signoff between --log and --stat to preserve the
alphabetical order.
[1]: https://public-inbox.org/git/87iqe7zspn.fsf@jondo.cante.net/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The call to cmd_diff_index() "git merge-ours" makes has been working
by accident that the function did not call exit(3), and the caller
exited almost immediately after making a call, but it sets a bad
precedent for people to cut and paste.
For finding out if the index exactly matches the HEAD (or a given
tree-ish), there is index_differs_from() which is exactly written
for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cmd_foo() function is a moral equivalent of 'main' for a Git
subcommand 'git foo', and as such, it is allowed to do many things
that make it unsuitable to be called as a subroutine, including
- call exit(3) to terminate the process;
- allocate resource held and used throughout its lifetime, without
releasing it upon return/exit;
- rely on global variables being initialized at program startup,
and update them as needed, making another clean invocation of the
function impossible.
The call to cmd_diff_index() "git describe" makes has been working
by accident that the function did not call exit(3); it sets a bad
precedent for people to cut and paste.
We could invoke it via the run_command() interface, but the diff
family of commands have helper functions in diff-lib.c that are
meant to be usable as subroutines, and using the latter does not
make the resulting code all that longer. Use it.
Note that there is also an invocation of cmd_name_rev() at the end;
"git describe --contains" massages its command line arguments to be
suitable for "git name-rev" invocation and jumps to it, never to
regain control. This call is left as-is as an exception to the
rule. When we start to allow calling name-rev repeatedly as a
helper function, we would be able to remove this call as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ds/avoid-overflow-in-midpoint-computation:
cleanup: fix possible overflow errors in binary search
|
|
A common mistake when writing binary search is to allow possible
integer overflow by using the simple average:
mid = (min + max) / 2;
Instead, use the overflow-safe version:
mid = min + (max - min) / 2;
This translation is safe since the operation occurs inside a loop
conditioned on "min < max". The included changes were found using
the following git grep:
git grep '/ *2;' '*.c'
Making this cleanup will prevent future review friction when a new
binary search is contructed based on existing code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Martin Ågren
Marius Paliga
Jeff King
Andrey Okoshkin
brian m. carlson
W. Trevor King
Derrick Stolee