| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
What should happen if you run this command?
$ git ls-remote -h
It does not give a short-help for the command. Instead because "-h" is a
synonym for "--heads", it runs "git ls-remote --heads", and because there
is no remote specified on the command line, we run it against the default
"origin" remote, hence end up doing the same as
$ git ls-remote --heads origin
Fix this counter-intuitive behaviour by special casing a lone "-h" that
does not have anything else on the command line and calling usage().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dr/maint-ls-tree-prefix-recursion-fix:
ls-tree $di $dir: do not mistakenly recurse into directories
|
|
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Save future readers the trouble of tracing code to determine that the two
uses of branch->remote_name are safe when has_merge is set, by adding a
comment explaining that it is so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/error-removing-missing-note:
notes: Don't create (empty) commit when removing non-existing notes
|
|
* bc/maint-fetch-url-only:
builtin/fetch.c: ignore merge config when not fetching from branch's remote
t/t5510: demonstrate failure to fetch when current branch has merge ref
|
|
* en/d-f-conflict-fix:
fast-export: ensure that a renamed file is printed after all references
|
|
t9350 sets up a commit where a file is both copied and renamed. The output
of fast-export for this commit should look like this:
author ...
committer ...
from :19
C "file2" "file4"
R "file2" "file5"
The order of the two modification lines is derived from the result that
the diff machinery produces.
060df62 (fast-export: Fix output order of D/F changes) inserted a qsort
call that modifies the order of the diff result. Unfortunately, qsort need
not be stable. Therefore, it is possible that the 'R' line appears before
the 'C' line and the resulting fast-import stream is incorrect.
Fix it by forcing that the rename entry is printed after all other
modification lines with the same file name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/clean-exclude:
builtin/clean.c: Use STRING_LIST_INIT_NODUP.
|
|
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
|
|
* dg/local-mod-error-messages:
t7609-merge-co-error-msgs: test non-fast forward case too.
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
setup_unpack_trees_porcelain: take the whole options struct as parameter
Move set_porcelain_error_msgs to unpack-trees.c and rename it
Conflicts:
merge-recursive.c
|
|
* nd/clone-depth-zero:
clone: warn users --depth is ignored in local clones
|
|
* jn/apply-filename-with-sp:
apply: handle traditional patches with space in filename
tests: exercise "git apply" with weird filenames
apply: split quoted filename handling into new function
|
|
* jn/merge-custom-no-trivial:
t7606: Avoid using head as a file name
merge: let custom strategies intervene in trivial merges
t7606 (merge-theirs): modernize style
|
|
* jn/update-contrib-example-merge: (24 commits)
merge script: learn --[no-]rerere-autoupdate
merge script: notice @{-1} shorthand
merge script: handle --no-ff --no-commit correctly
merge script: --ff-only to disallow true merge
merge script: handle many-way octopus
merge script: handle -m --log correctly
merge script: forbid merge -s index
merge script: allow custom strategies
merge script: merge -X<option>
merge script: improve log message subject
merge script: refuse to merge during merge
merge script: tweak unmerged files message to match builtin
merge script: --squash, --ff from unborn branch are errors
fmt-merge-msg -m to override merge title
merge-base --independent to print reduced parent list in a merge
merge-base --octopus to mimic show-branch --merge-base
Documentation: add a SEE ALSO section for merge-base
t6200 (fmt-merge-msg): style nitpicks
t6010 (merge-base): modernize style
t7600 (merge): test merge from branch yet to be born
...
|
|
* jn/merge-renormalize:
merge-recursive --renormalize
rerere: never renormalize
rerere: migrate to parse-options API
t4200 (rerere): modernize style
ll-merge: let caller decide whether to renormalize
ll-merge: make flag easier to populate
Documentation/technical: document ll_merge
merge-trees: let caller decide whether to renormalize
merge-trees: push choice to renormalize away from low level
t6038 (merge.renormalize): check that it can be turned off
t6038 (merge.renormalize): try checkout -m and cherry-pick
t6038 (merge.renormalize): style nitpicks
Don't expand CRLFs when normalizing text during merge
Try normalizing files to avoid delete/modify conflicts when merging
Avoid conflicts when merging branches with mixed normalization
Conflicts:
builtin/rerere.c
t/t4200-rerere.sh
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This improves the usage output by adding builtin_merge_recursive_usage string
that follows the same pattern used by the other builtin commands.
The previous output for git merger-recursive was:
usage: merge-recursive <base>... -- <head> <remote> ...
Now the output is:
usage: git merge-recursive <base>... -- <head> <remote> ...
Since cmd_merge_recursive is used to handle four different commands we need
the %s in the usage string, so the following example:
$ git merge-subtree -h
Will output:
usage: git merge-subtree <base>... -- <head> <remote> ...
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Not only this makes the code clearer since setting up the porcelain error
message is meant to work with show_all_errors, but this fixes a call to
setup_unpack_trees_porcelain() in git_merge_trees() which did not set
show_all_errors.
add_rejected_path() used to double-check whether it was running in
plumbing mode. This check was ineffective since it was setting
show_all_errors too late for traverse_trees() to see it, and is made
useless by this patch. Remove it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a preparation patch to let setup_unpack_trees_porcelain set
show_all_errors itself.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function is currently dealing only with error messages, but the
intent of calling it is really to notify the unpack-tree mechanics that
it is running in porcelain mode.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sg/rerere-gc-old-still-used:
rerere: fix overeager gc
mingw_utime(): handle NULL times parameter
|
|
* dj/fetch-tagopt:
fetch: allow command line --tags to override config
|
|
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
|
|
* ab/maint-reset-mixed-w-pathspec-advice:
reset: suggest what to do upon "git reset --mixed <paths>"
|
|
* dj/fetch-tagopt:
fetch: allow command line --tags to override config
|
|
* en/d-f-conflict-fix:
merge-recursive: Avoid excessive output for and reprocessing of renames
merge-recursive: Fix multiple file rename across D/F conflict
t6031: Add a testcase covering multiple renames across a D/F conflict
merge-recursive: Fix typo
Mark tests that use symlinks as needing SYMLINKS prerequisite
t/t6035-merge-dir-to-symlink.sh: Remove TODO on passing test
fast-import: Improve robustness when D->F changes provided in wrong order
fast-export: Fix output order of D/F changes
merge_recursive: Fix renames across paths below D/F conflicts
merge-recursive: Fix D/F conflicts
Add a rename + D/F conflict testcase
Add additional testcases for D/F conflicts
Conflicts:
merge-recursive.c
|
|
* jn/paginate-fix:
t7006 (pager): add missing TTY prerequisites
merge-file: run setup_git_directory_gently() sooner
var: run setup_git_directory_gently() sooner
ls-remote: run setup_git_directory_gently() sooner
index-pack: run setup_git_directory_gently() sooner
config: run setup_git_directory_gently() sooner
bundle: run setup_git_directory_gently() sooner
apply: run setup_git_directory_gently() sooner
grep: run setup_git_directory_gently() sooner
shortlog: run setup_git_directory_gently() sooner
git wrapper: allow setup_git_directory_gently() be called earlier
setup: remember whether repository was found
git wrapper: introduce startup_info struct
Conflicts:
builtin/index-pack.c
|
|
* jn/maint-setup-fix:
setup: split off a function to handle ordinary .git directories
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
Conflicts:
builtin/index-pack.c
|
|
* en/fast-export-fix:
fast-export: Add a --full-tree option
fast-export: Fix dropping of files with --import-marks and path limiting
|
|
* sg/rerere-gc-old-still-used:
rerere: fix overeager gc
mingw_utime(): handle NULL times parameter
|
|
Extend remove_note() in the notes API to return whether or not a note was
actually removed. Use this in 'git notes remove' to skip the creation of
a notes commit when no notes were actually removed.
Also add a test illustrating the change in behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For "git status" and the diff family the submodule.*.ignore settings from
.git/config and .gitmodules can be used to override the default set via
diff.ignoreSubmodules on a per-submodule basis. Let's do this consistently
and teach checkout to use these settings too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
for-each-ref: fix objectname:short bug
tree-walk: Correct bitrotted comment about tree_entry()
Fix 'git log' early pager startup error case
|
|
When objectname:short was introduced, it forgot to copy the result of
find_unique_abbrev. Because the result of find_unique_abbrev is a
pointer to static buffer, this resulted in the same value being
substituted in for each ref.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git fetch' is supplied a single argument, it tries to match it
against a configured remote and then fetch the refs specified by the
named remote's fetchspec. Additionally, or alternatively, if the current
branch has a merge ref configured, and if the name of the remote supplied
to fetch matches the one in the branch's configuration, then git also adds
the merge ref to the list of refs to update.
If the argument to fetch does not specify a named remote, or if the name
supplied does not match the remote configured for the current branch, then
the current branch's merge configuration should not be considered.
git currently mishandles the case when the argument to fetch specifies a
GIT URL(i.e. not a named remote) and the current branch has a configured
merge ref. In this case, fetch should ignore the branch's merge ref and
attempt to fetch from the remote repository's HEAD branch. But, since
fetch only checks _whether_ the current branch has a merge ref configured,
and does _not_ check whether the branch's configured remote matches the
command line argument (until later), it will mistakenly enter the wrong
branch of an 'if' statement and will not fall back to fetch the HEAD branch.
The fetch ends up doing nothing and returns with a successful zero status.
Fix this by comparing the remote repository's name to the branch's remote
name, in addition to whether it has a configured merge ref, sooner, so that
fetch can correctly decide whether the branch's configuration is interesting
or not, and fall back to fetching from the remote's HEAD branch when
appropriate.
This fixes the test in t5510.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git checkout' reports uncommitted changes, it also does so for
submodules.
The default mode is now to look really hard into submodules, not only
for different commits, but also for modified files. Since this can be
pretty expensive when there are a lot (and large) submodules, there is
the diff.ignoreSubmodules option.
Let's respect that setting when 'git checkout' reports the uncommitted
changes, since it does nothing else than a 'git diff --name-status'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We start the pager too early for several git commands, which results in
the errors sometimes going to the pager rather than show up as errors.
This is often hidden by the fact that we pass in '-X' to less by default,
which causes 'less' to exit for small output, but if you do
export LESS=-S
you can then clearly see the problem by doing
git log --prretty
which shows the error message ("fatal: unrecognized argument: --prretty")
being sent to the pager.
This happens for pretty much all git commands that use USE_PAGER, and then
check arguments separately. But "git diff" does it too early too (even
though it does an explicit setup_pager() call)
This only fixes it for the trivial "git log" family case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Typos in code comments, an error message, documentation
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* gb/split-cmdline-errmsg:
split_cmdline: Allow caller to access error string
|
|
* sr/local-config:
config: add --local option
|
|
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Conflicts:
t/t3400-rebase.sh
|
|
When you call "git reset --mixed <paths>" git will warn that using mixed
with paths is deprecated:
warning: --mixed option is deprecated with paths.
That doesn't tell the user what he should use instead. Expand on the
warning and tell the user to just omit --mixed:
warning: --mixed with paths is deprecated; use 'git reset -- <paths>' instead
The exact wording of the warning was suggested by Jonathan Nieder.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To discover filenames from the --- and +++ lines in a traditional
unified diff, currently "git apply" scans forward for a whitespace
character on each line and stops there. It can't use the whole line
because "diff -u" likes to include timestamps, like so:
--- foo 2000-07-12 16:56:50.020000414 -0500
+++ bar 2010-07-12 16:56:50.020000414 -0500
The whitespace-seeking heuristic works great, even when the tab
has been converted to spaces by some email + copy-and-paste
related corruption.
Except for one problem: if the filename itself contains whitespace,
the inferred filename will be too short.
When Giuseppe ran into this problem, it was for a file creation
patch (for debian/licenses/LICENSE.global BSD-style Chromium).
So one can't use the list of files present in the index to deduce an
appropriate filename (not to mention that way lies madness; see
v0.99~402, 2005-05-31).
Instead, look for a timestamp and use that if present to mark the end
of the filename. If no timestamp is present, the old heuristic is
used, with one exception: the space character \040 is not considered
terminating whitespace any more unless it is followed by a timestamp.
Reported-by: Giuseppe Iuculano <iuculano@debian.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new find_name_gnu() function handles new-style '--- "a/foo"'
patch header lines, leaving find_name() itself a bit less
daunting.
Functional change: do not clobber the p-value when there are not
enough path components in a quoted file name to honor it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Brandon Casey
Johannes Sixt
Elijah Newren
Thiago Farina
Matthieu Moy
Johan Herland
Jens Lehmann
Jay Soffian
Johannes Schindelin
Linus Torvalds
Nguyễn Thái Ngọc Duy
Ralf Wildenhues
Ævar Arnfjörð Bjarmason
Jonathan Nieder