| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code cleanup.
* tb/shallow-cleanup:
shallow: use struct 'shallow_lock' for additional safety
shallow.h: document '{commit,rollback}_shallow_file'
shallow: extract a header file for shallow-related functions
commit: make 'commit_graft_pos' non-static
|
|
The <stdlib.h> header on NetBSD brings in its own definition of
hmac() function (eek), which conflicts with our own and unrelated
function with the same name. Our function has been renamed to work
around the issue.
* cb/avoid-colliding-with-netbsd-hmac:
builtin/receive-pack: avoid generic function name hmac()
|
|
"git restore --staged --worktree" now defaults to take the contents
out of "HEAD", instead of erring out.
* es/restore-staged-from-head-by-default:
restore: default to HEAD when combining --staged and --worktree
|
|
"git branch" and other "for-each-ref" variants accepted multiple
--sort=<key> options in the increasing order of precedence, but it
had a few breakages around "--ignore-case" handling, and tie-breaking
with the refname, which have been fixed.
* jk/for-each-ref-multi-key-sort-fix:
ref-filter: apply fallback refname sort only after all user sorts
ref-filter: apply --ignore-case to all sorting keys
|
|
In error messages that "git switch" mentions its option to create a
new branch, "-b/-B" options were shown, where "-c/-C" options
should be, which has been corrected.
* dl/switch-c-option-in-error-message:
switch: fix errors and comments related to -c and -C
|
|
Code cleanup.
* dl/push-recurse-submodules-fix:
push: unset PARSE_OPT_OPTARG for --recurse-submodules
|
|
Code cleanup.
* dl/opt-callback-cleanup:
Use OPT_CALLBACK and OPT_CALLBACK_F
|
|
By default, files are restored from the index for --worktree, and from
HEAD for --staged. When --worktree and --staged are combined, --source
must be specified to disambiguate the restore source[1], thus making it
cumbersome to restore a file in both the worktree and the index.
However, HEAD is also a reasonable default for --worktree when combined
with --staged, so make it the default anytime --staged is used (whether
combined with --worktree or not).
[1]: Due to an oversight, the --source requirement, though documented,
is not actually enforced.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fabec2c5c3 (builtin/receive-pack: switch to use the_hash_algo, 2019-08-18)
renames hmac_sha1 to hmac, as it was updated to use the hash function used
by git (which won't be sha1 in the future).
hmac() is provided by NetBSD >= 8 libc and therefore conflicts as shown by :
builtin/receive-pack.c:421:13: error: conflicting types for 'hmac'
static void hmac(unsigned char *out,
^~~~
In file included from ./git-compat-util.h:172:0,
from ./builtin.h:4,
from builtin/receive-pack.c:1:
/usr/include/stdlib.h:305:10: note: previous declaration of 'hmac' was here
ssize_t hmac(const char *, const void *, size_t, const void *, size_t, void *,
^~~~
Rename it again to hmac_hash to reflect it will use the git's defined hash
function and avoid the conflict, while at it update a comment to better
describe the HMAC function that was used.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the ref-filter users (for-each-ref, branch, and tag) take an
--ignore-case option which makes filtering and sorting case-insensitive.
However, this option was applied only to the first element of the
ref_sorting list. So:
git for-each-ref --ignore-case --sort=refname
would do what you expect, but:
git for-each-ref --ignore-case --sort=refname --sort=taggername
would sort the primary key (taggername) case-insensitively, but sort the
refname case-sensitively. We have two options here:
- teach callers to set ignore_case on the whole list
- replace the ref_sorting list with a struct that contains both the
list of sorting keys, as well as options that apply to _all_
keys
I went with the first one here, as it gives more flexibility if we later
want to let the users set the flag per-key (presumably through some
special syntax when defining the key; for now it's all or nothing
through --ignore-case).
The new test covers this by sorting on both tagger and subject
case-insensitively, which should compare "a" and "A" identically, but
still sort them before "b" and "B". We'll break ties by sorting on the
refname to give ourselves a stable output (this is actually supposed to
be done automatically, but there's another bug which will be fixed in
the next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error and verbose trace messages from "git push" did not redact
credential material embedded in URLs.
* js/anonymise-push-url-in-errors:
push: anonymize URLs in error messages and warnings
|
|
The "bugreport" tool.
* es/bugreport:
bugreport: drop extraneous includes
bugreport: add compiler info
bugreport: add uname info
bugreport: gather git version and build info
bugreport: add tool to generate debugging info
help: move list_config_help to builtin/help
|
|
Incompatible options "--root" and "--fork-point" of "git rebase"
have been marked and documented as being incompatible.
* en/rebase-root-and-fork-point-are-incompatible:
rebase: display an error if --root and --fork-point are both provided
|
|
"git blame" learns to take advantage of the "changed-paths" Bloom
filter stored in the commit-graph file.
* ds/blame-on-bloom:
test-bloom: check that we have expected arguments
test-bloom: fix some whitespace issues
blame: drop unused parameter from maybe_changed_path
blame: use changed-path Bloom filters
tests: write commit-graph with Bloom filters
revision: complicated pathspecs disable filters
|
|
Introduce an extension to the commit-graph to make it efficient to
check for the paths that were modified at each commit using Bloom
filters.
* gs/commit-graph-path-filter:
bloom: ignore renames when computing changed paths
commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag
t4216: add end to end tests for git log with Bloom filters
revision.c: add trace2 stats around Bloom filter usage
revision.c: use Bloom filters to speed up path based revision walks
commit-graph: add --changed-paths option to write subcommand
commit-graph: reuse existing Bloom filters during write
commit-graph: write Bloom filters to commit graph file
commit-graph: examine commits by generation number
commit-graph: examine changed-path objects in pack order
commit-graph: compute Bloom filters for changed paths
diff: halt tree-diff early after max_changes
bloom.c: core Bloom filter implementation for changed paths.
bloom.c: introduce core Bloom filter constructs
bloom.c: add the murmur3 hash implementation
commit-graph: define and use MAX_NUM_CHUNKS
|
|
"git commit-graph write" learned different ways to write out split
files.
* tb/commit-graph-split-strategy:
Revert "commit-graph.c: introduce '--[no-]check-oids'"
commit-graph.c: introduce '--[no-]check-oids'
commit-graph.h: replace 'commit_hex' with 'commits'
oidset: introduce 'oidset_size'
builtin/commit-graph.c: introduce split strategy 'replace'
builtin/commit-graph.c: introduce split strategy 'no-merge'
builtin/commit-graph.c: support for '--split[=<strategy>]'
t/helper/test-read-graph.c: support commit-graph chains
|
|
Fix in-core inconsistency after fetching into a shallow repository
that broke the code to write out commit-graph.
* tb/reset-shallow:
shallow.c: use '{commit,rollback}_shallow_file'
t5537: use test_write_lines and indented heredocs for readability
|
|
In previous patches, the functions 'commit_shallow_file' and
'rollback_shallow_file' were introduced to reset the shallowness
validity checks on a repository after potentially modifying
'.git/shallow'.
These functions can be made safer by wrapping the 'struct lockfile *' in
a new type, 'shallow_lock', so that they cannot be called with a raw
lock (and potentially misused by other code that happens to possess a
lockfile, but has nothing to do with shallowness).
This patch introduces that type as a thin wrapper around 'struct
lockfile', and updates the two aforementioned functions and their
callers to use it.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In d787d311db (checkout: split part of it to new command 'switch',
2019-03-29), the `git switch` command was created by extracting the
common functionality of cmd_checkout() in checkout_main(). However, in
b7b5fce270 (switch: better names for -b and -B, 2019-03-29), the branch
creation and force creation options for 'switch' were changed to -c and
-C, respectively. As a result of this, error messages and comments that
previously referred to `-b` and `-B` became invalid for `git switch`.
For error messages that refer to `-b` and `-B`, use a format string
instead so that `-c` and `-C` can be printed when `git switch` is
invoked.
Reported-by: Robert Simpson
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git update-ref --stdin" learned a handful of new verbs to let the
user control ref update transactions more explicitly, which helps
as an ingredient to implement two-phase commit-style atomic
ref-updates across multiple repositories.
* ps/transactional-update-ref-stdin:
update-ref: implement interactive transaction handling
update-ref: read commands in a line-wise fashion
update-ref: move transaction handling into `update_refs_stdin()`
update-ref: pass end pointer instead of strbuf
update-ref: drop unused argument for `parse_refname`
update-ref: organize commands in an array
strbuf: provide function to append whole lines
git-update-ref.txt: add missing word
refs: fix segfault when aborting empty transaction
|
|
The directory traversal code had redundant recursive calls which
made its performance characteristics exponential with respect to
the depth of the tree, which was corrected.
* en/fill-directory-exponential:
completion: fix 'git add' on paths under an untracked directory
Fix error-prone fill_directory() API; make it only return matches
dir: replace double pathspec matching with single in treat_directory()
dir: include DIR_KEEP_UNTRACKED_CONTENTS handling in treat_directory()
dir: replace exponential algorithm with a linear one
dir: refactor treat_directory to clarify control flow
dir: fix confusion based on variable tense
dir: fix broken comment
dir: consolidate treat_path() and treat_one_path()
dir: fix simple typo in comment
t3000: add more testcases testing a variety of ls-files issues
t7063: more thorough status checking
|
|
"sparse-checkout" UI improvements.
* en/sparse-checkout:
sparse-checkout: provide a new reapply subcommand
unpack-trees: failure to set SKIP_WORKTREE bits always just a warning
unpack-trees: provide warnings on sparse updates for unmerged paths too
unpack-trees: make sparse path messages sound like warnings
unpack-trees: split display_error_msgs() into two
unpack-trees: rename ERROR_* fields meant for warnings to WARNING_*
unpack-trees: move ERROR_WOULD_LOSE_SUBMODULE earlier
sparse-checkout: use improved unpack_trees porcelain messages
sparse-checkout: use new update_sparsity() function
unpack-trees: add a new update_sparsity() function
unpack-trees: pull sparse-checkout pattern reading into a new function
unpack-trees: do not mark a dirty path with SKIP_WORKTREE
unpack-trees: allow check_updates() to work on a different index
t1091: make some tests a little more defensive against failures
unpack-trees: simplify pattern_list freeing
unpack-trees: simplify verify_absent_sparse()
unpack-trees: remove unused error type
unpack-trees: fix minor typo in comment
|
|
The stash entry created by "git rebase --autosquash" to keep the
initial dirty state were discarded by mistake upon "git rebase
--quit", which has been corrected.
* dl/merge-autostash-rebase-quit-fix:
rebase: save autostash entry into stash reflog on --quit
|
|
"git merge" learns the "--autostash" option.
* dl/merge-autostash: (22 commits)
pull: pass --autostash to merge
t5520: make test_pull_autostash() accept expect_parent_num
merge: teach --autostash option
sequencer: implement apply_autostash_oid()
sequencer: implement save_autostash()
sequencer: unlink autostash in apply_autostash()
sequencer: extract perform_autostash() from rebase
rebase: generify create_autostash()
rebase: extract create_autostash()
reset: extract reset_head() from rebase
rebase: generify reset_head()
rebase: use apply_autostash() from sequencer.c
sequencer: rename stash_sha1 to stash_oid
sequencer: make apply_autostash() accept a path
rebase: use read_oneliner()
sequencer: make read_oneliner() extern
sequencer: configurably warn on non-existent files
sequencer: make read_oneliner() accept flags
sequencer: make file exists check more efficient
sequencer: stop leaking buf
...
|
|
This reverts commit 7a9ce0269bc0f4ef230f930b3910b70ac3142552,
which has not yet gained consensus.
|
|
"git grep" did not quote a path with unusual character like other
commands (like "git diff", "git status") do, but did quote when run
from a subdirectory, both of which has been corrected.
* mt/grep-cquote-path:
grep: follow conventions for printing paths w/ unusual chars
|
|
The "--decorate-refs" and "--decorate-refs-exclude" options "git
log" takes have learned a companion configuration variable
log.excludeDecoration that sits at the lowest priority in the
family.
* ds/log-exclude-decoration-config:
log: add log.excludeDecoration config option
log-tree: make ref_filter_match() a helper method
|
|
"git diff-tree --pretty --notes" used to hit an assertion failure,
as it forgot to initialize the notes subsystem.
* tb/diff-tree-with-notes:
diff-tree.c: load notes machinery when required
|
|
Allowing the user to split a patch hunk while "git stash -p" does
not work well; a band-aid has been added to make this (partially)
work better.
* js/stash-p-fix:
stash -p: (partially) fix bug concerning split hunks
t3904: fix incorrect demonstration of a bug
|
|
Code in builtin/*, i.e. those can only be called from within
built-in subcommands, that implements bulk of a couple of
subcommands have been moved to libgit.a so that they could be used
by others.
* dl/libify-a-few:
Lib-ify prune-packed
Lib-ify fmt-merge-msg
|
|
"git diff" in a partial clone learned to avoid lazy loading blob
objects in more casese when they are not needed.
* jt/avoid-prefetch-when-able-in-diff:
diff: restrict when prefetching occurs
diff: refactor object read
diff: make diff_populate_filespec_options struct
promisor-remote: accept 0 as oid_nr in function
|
|
"git commit-graph write --expire-time=<timestamp>" did not use the
given timestamp correctly, which has been corrected.
* ds/commit-graph-expiry-fix:
commit-graph: fix buggy --expire-time option
|
|
"git log" learns "--[no-]mailmap" as a synonym to "--[no-]use-mailmap"
* jc/log-no-mailmap:
log: give --[no-]use-mailmap a more sensible synonym --[no-]mailmap
clone: reorder --recursive/--recurse-submodules
parse-options: teach "git cmd -h" to show alias as alias
|
|
The config API made mixed uses of int and size_t types to represent
length of various pieces of text it parsed, which has been updated
to use the correct type (i.e. size_t) throughout.
* jk/config-use-size-t:
config: reject parsing of files over INT_MAX
config: use size_t to store parsed variable baselen
git_config_parse_key(): return baselen as size_t
config: drop useless length variable in write_pair()
parse_config_key(): return subsection len as size_t
remote: drop auto-strlen behavior of make_branch() and make_rewrite()
|
|
Validation of push certificate has been made more robust against
timing attacks.
* bc/constant-memequal:
receive-pack: compilation fix
builtin/receive-pack: use constant-time comparison for HMAC value
|
|
Just like 47abd85ba0 (fetch: Strip usernames from url's before storing
them, 2009-04-17) and later 882d49ca5c (push: anonymize URL in status
output, 2016-07-13), and even later c1284b21f243 (curl: anonymize URLs
in error messages and warnings, 2019-03-04) this change anonymizes URLs
(read: strips them of user names and especially passwords) in
user-facing error messages and warnings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a03b55530a (merge: teach --autostash option, 2020-04-07), the
--autostash option was introduced for `git merge`. Notably, when
`git merge --quit` is run with an autostash entry present, it is saved
into the stash reflog. This is contrasted with the current behaviour of
`git rebase --quit` where the autostash entry is simply just dropped out
of existence.
Adopt the behaviour of `git merge --quit` in `git rebase --quit` and
save the autostash entry into the stash reflog instead of just deleting
it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the usage for `git push` is shown, it includes the following
lines
--recurse-submodules[=(check|on-demand|no)]
control recursive pushing of submodules
which seem to indicate that the argument for --recurse-submodules is
optional. However, we cannot actually run that optiion without an
argument:
$ git push --recurse-submodules
fatal: recurse-submodules missing parameter
Unset PARSE_OPT_OPTARG so that it is clear that this option requires an
argument. Since the parse-options machinery guarantees that an argument
is present now, assume that `arg` is set in the else of
option_parse_recurse_submodules().
Reported-by: Andrew White <andrew.white@audinate.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--root implies we want to rebase all commits since the beginning of
history. --fork-point means we want to use the reflog of the specified
upstream to find the best common ancestor between <upstream> and
<branch> and only rebase commits since that common ancestor. These
options are clearly contradictory, so throw an error (instead of
segfaulting on a NULL pointer) if both are specified.
Reported-by: Alexander Berg <alexander.berg@atos.net>
Documentation-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In bd0b42aed3 (fetch-pack: do not take shallow lock unnecessarily,
2019-01-10), the author noted that 'is_repository_shallow' produces
visible side-effect(s) by setting 'is_shallow' and 'shallow_stat'.
This is a problem for e.g., fetching with '--update-shallow' in a
shallow repository with 'fetch.writeCommitGraph' enabled, since the
update to '.git/shallow' will cause Git to think that the repository
isn't shallow when it is, thereby circumventing the commit-graph
compatibility check.
This causes problems in shallow repositories with at least shallow refs
that have at least one ancestor (since the client won't have those
objects, and therefore can't take the reachability closure over commits
when writing a commit-graph).
Address this by introducing thin wrappers over 'commit_lock_file' and
'rollback_lock_file' for use specifically when the lock is held over
'.git/shallow'. These wrappers (appropriately called
'commit_shallow_file' and 'rollback_shallow_file') call into their
respective functions in 'lockfile.h', but additionally reset validity
checks used by the shallow machinery.
Replace each instance of 'commit_lock_file' and 'rollback_lock_file'
with 'commit_shallow_file' and 'rollback_shallow_file' when the lock
being held is over the '.git/shallow' file.
As a result, 'prune_shallow' can now only be called once (since
'check_shallow_file_for_update' will die after calling
'reset_repository_shallow'). But, this is OK since we only call
'prune_shallow' at most once per process.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow "git rebase" to reapply all local commits, even if the may be
already in the upstream, without checking first.
* jt/rebase-allow-duplicate:
rebase --merge: optionally skip upstreamed commits
|
|
"git rebase" (again) learns to honor "--no-keep-empty", which lets
the user to discard commits that are empty from the beginning (as
opposed to the ones that become empty because of rebasing). The
interactive rebase also marks commits that are empty in the todo.
* en/rebase-no-keep-empty:
rebase: fix an incompatible-options error message
rebase: reinstate --no-keep-empty
rebase -i: mark commits that begin empty in todo editor
|
|
The interactive input from various codepaths are consolidated and
any prompt possibly issued earlier are fflush()ed before we read.
* js/flush-prompt-before-interative-input:
interactive: explicitly `fflush` stdout before expecting input
interactive: refactor code asking the user for interactive input
|
|
Code simplification.
* ma/simplify-merge-config-parsing:
merge: use skip_prefix to parse config key
|
|
The output from "git format-patch" uses RFC 2047 encoding for
non-ASCII letters on From: and Subject: headers, so that it can
directly be fed to e-mail programs. A new option has been added
to produce these headers in raw.
* eb/format-patch-no-encode-headers:
format-patch: teach --no-encode-email-headers
|
|
"git rebase" learned the "--no-gpg-sign" option to countermand
commit.gpgSign the user may have.
* dd/no-gpg-sign:
Documentation: document merge option --no-gpg-sign
Documentation: merge commit-tree --[no-]gpg-sign
Documentation: reword commit --no-gpg-sign
Documentation: document am --no-gpg-sign
cherry-pick/revert: honour --no-gpg-sign in all case
rebase.c: honour --no-gpg-sign
|
|
The logic to auto-follow tags by "git clone --single-branch" was
not careful to avoid lazy-fetching unnecessary tags, which has been
corrected.
* jk/use-quick-lookup-in-clone-for-tag-following:
clone: use "quick" lookup while following tags
|
|
Code cleanup.
* jk/oid-array-cleanups:
oidset: stop referring to sha1-array
ref-filter: stop referring to "sha1 array"
bisect: stop referring to sha1_array
test-tool: rename sha1-array to oid-array
oid_array: rename source file from sha1-array
oid_array: use size_t for iteration
oid_array: use size_t for count and allocation
|
Junio C Hamano
Eric Sunshine
Carlo Marcelo Arenas Belón
Jeff King
Taylor Blau
Denton Liu
Johannes Schindelin
Elijah Newren