| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
|
|
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
|
|
Unlike "git apply", "git patch-id" did not handle patches with
hunks that has only 1 line in either preimage or postimage, which
has been corrected.
* jz/patch-id-hunk-header-parsing-fix:
patch-id: fix scan_hunk_header on diffs with 1 line of before/after
patch-id: fix antipatterns in tests
|
|
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
|
|
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
|
|
Typofix.
* sy/diff-usage-typofix:
builtin/diff.c: fix "git-diff" usage string typo
|
|
When "git fetch --prune" failed to prune the refs it wanted to
prune, the command issued error messages but exited with exit
status 0, which has been corrected.
* tg/fetch-prune-exit-code-fix:
fetch --prune: exit with error if pruning fails
|
|
Leakfix.
* en/sparse-checkout-leakfix:
sparse-checkout: fix a couple minor memory leaks
|
|
Typofix.
* rc/negotiate-only-typofix:
fetch: fix negotiate-only error message
|
|
Cloning from a repository that does not yet have any branches or
tags but has other refs resulted in a "remote transport reported
error", which has been corrected.
* jt/clone-not-quite-empty:
clone: support unusual remote ref configurations
|
|
"git sparse-checkout init" failed to write into $GIT_DIR/info
directory when the repository was created without one, which has
been corrected to auto-create it.
* jt/sparse-checkout-leading-dir-fix:
sparse-checkout: create leading directory
|
|
Leakfix.
* en/plug-leaks-in-merge:
merge: fix memory leaks in cmd_merge()
merge-ort: fix memory leak in merge_ort_internal()
|
|
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
|
|
"git name-rev --stdin" does not behave like usual "--stdin" at
all. Start the process of renaming it to "--annotate-stdin".
* jc/name-rev-stdin:
name-rev.c: use strbuf_getline instead of limited size buffer
name-rev: deprecate --stdin in favor of --annotate-stdin
|
|
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
|
|
"git update-index --refresh" has been taught to deal better with
racy timestamps (just like "git status" already does).
* ms/update-index-racy:
update-index: refresh should rewrite index in case of racy timestamps
t7508: add tests capturing racy timestamp handling
t7508: fix bogus mtime verification
test-lib: introduce API for verifying file mtime
|
|
Use the parse-options API in "git reflog" command.
* jc/reflog-parse-options:
builtin/reflog.c: use parse-options api for expire, delete subcommands
|
|
Assorted updates to "git cat-file", especially "-h".
* ab/cat-file:
cat-file: s/_/-/ in typo'd usage_msg_optf() message
cat-file: don't whitespace-pad "(...)" in SYNOPSIS and usage output
cat-file: use GET_OID_ONLY_TO_DIE in --(textconv|filters)
object-name.c: don't have GET_OID_ONLY_TO_DIE imply *_QUIETLY
cat-file: correct and improve usage information
cat-file: fix remaining usage bugs
cat-file: make --batch-all-objects a CMDMODE
cat-file: move "usage" variable to cmd_cat_file()
cat-file docs: fix SYNOPSIS and "-h" output
parse-options API: add a usage_msg_optf()
cat-file tests: test messaging on bad objects/paths
cat-file tests: test bad usage
|
|
Code clean-up.
* jc/find-header:
receive-pack.c: consolidate find header logic
|
|
"git pull --rebase" ignored the rebase.autostash configuration
variable when the remote history is a descendant of our history,
which has been corrected.
* pb/pull-rebase-autostash-fix:
pull --rebase: honor rebase.autostash when fast-forwarding
|
|
Remove mistaken right square brackets from "git-diff"
usage string. Make the usage string conform to "git-diff"
documentation (Documentation/git-diff.txt).
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Normally diffs will contain a hunk header of the format
"@@ -2,2 +2,15 @@ code". However when there is only 1 line of
change, the unified diff format allows for the second comma
separated value to be omitted in either before or after
line counts.
This can produce hunk headers that look like
"@@ -2 +2,18 @@ code" or "@@ -2,2 +2 @@ code".
As a result, scan_hunk_header mistakenly returns the line
number as line count, which then results in unpredictable
parsing errors with the rest of the patch, including giving
multiple lines of output for a single commit.
Fix by explicitly setting line count to 1 when there is
no comma, and add a test.
apply.c contains this same logic except it is correct. A
worthwhile future project might be to unify these two diff
parsers so they both benefit from fixes.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since some callers may want to send warning messages to somewhere other
than stdout/stderr, stop printing "warning: Cannot merge binary files"
from ll-merge and instead modify the return status of ll_merge() to
indicate when a merge of binary files has occurred. Message printing
probably does not belong in a "low-level merge" anyway.
This commit continues printing the message as-is, just from the callers
instead of within ll_merge(). Future changes will start handling the
message differently in the merge-ort codepath.
There was one special case here: the callers in rerere.c do NOT check
for and print such a message; since those code paths explicitly skip
over binary files, there is no reason to check for a return status of
LL_MERGE_BINARY_CONFLICT or print the related message.
Note that my methodology included first modifying ll_merge() to return
a struct, so that the compiler would catch all the callers for me and
ensure I had modified all of them. After modifying all of them, I then
changed the struct to an enum.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --remerge-diff option will need to create new blobs and trees
representing the "automatic merge" state. If one is traversing a
long project history, one can easily get hundreds of thousands of
loose objects generated during `log --remerge-diff`. However, none of
those loose objects are needed after we have completed our diff
operation; they can be summarily deleted.
Add a new helper function to tmp_objdir to discard all the contained
objects, and call it after each merge is handled.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When this option is specified, we remerge all (two parent) merge commits
and diff the actual merge commit to the automatically created version,
in order to show how users removed conflict markers, resolved the
different conflict versions, and potentially added new changes outside
of conflict regions in order to resolve semantic merge problems (or,
possibly, just to hide other random changes).
This capability works by creating a temporary object directory and
marking it as the primary object store. This makes it so that any blobs
or trees created during the automatic merge are easily removable
afterwards by just deleting all objects from the temporary object
directory.
There are a few ways that this implementation is suboptimal:
* `log --remerge-diff` becomes slow, because the temporary object
directory can fill with many loose objects while running
* the log output can be muddied with misplaced "warning: cannot merge
binary files" messages, since ll-merge.c unconditionally writes those
messages to stderr while running instead of allowing callers to
manage them.
* important conflict and warning messages are simply dropped; thus for
conflicts like modify/delete or rename/rename or file/directory which
are not representable with content conflict markers, there may be no
way for a user of --remerge-diff to know that there had been a
conflict which was resolved (and which possibly motivated other
changes in the merge commit).
* when fixing the previous issue, note that some unimportant conflict
and warning messages might start being included. We should instead
make sure these remain dropped.
Subsequent commits will address these issues.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pushing a hidden ref, e.g.:
$ git push origin HEAD:refs/hidden/foo
"receive-pack" will reject our request with an error message like this:
! [remote rejected] HEAD -> refs/hidden/foo (deny updating a hidden ref)
The remote side ("git-receive-pack") will not create the hidden ref as
expected, but the pack file sent by "git-send-pack" is left inside the
remote repository. I.e. the quarantine directory is not purged as it
should be.
Add a checkpoint before calling "tmp_objdir_migrate()" and after calling
the "pre-receive" hook to purge that temporary data in the quarantine
area when there is no command ready to run.
The reason we do not add the checkpoint before the "pre-receive" hook,
but after it, is that the "pre-receive" hook is called with a switch-off
"skip_broken" flag, and all commands, even broken ones, should be fed
by calling "feed_receive_hook()".
Add a new test case in t5516 as well.
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Helped-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Chen Bojun <bojun.cbj@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pruning refs fails, we print an error to stderr, but still
exit 0 from 'git fetch'. Since this is a genuine error, fetch
should be exiting with some non-zero exit code. Make it so.
The --prune option was introduced in f360d844de ("builtin-fetch: add
--prune option", 2009-11-10). Unfortunately it's unclear from that
commit whether ignoring the exit code was an oversight or
intentional, but it feels like an oversight.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
|
|
The error message when invoking a negotiate-only fetch without providing
any tips incorrectly refers to a --negotiate-tip=* argument. Fix this to
use the actual argument, --negotiation-tip=*.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These were introduced in commit 55dfcf9591 ("sparse-checkout: clear
tracked sparse dirs", 2021-09-08) and missed in my review at the time.
Plug the leaks.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 8a2cd3f5123 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we removed support for `stash.useBuiltin`, but left a warning in its
place.
After almost two years, and several major versions, it is time to remove
even that warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 90a6bb98d11 (legacy stash -p: respect the add.interactive.usebuiltin
setting, 2019-12-21), we added support to use the built-in `add -p` from
the scripted `stash -p`.
In 8a2cd3f5123 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we retired the scripted `stash` (including the scripted `stash -p`).
Therefore this support is no longer necessary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
|
|
In commits bc3ae46b42 ("rebase: do not attempt to remove
startup_info->original_cwd", 2021-12-09) and 0fce211ccc ("stash: do not
attempt to remove startup_info->original_cwd", 2021-12-09), we wanted to
allow the subprocess to know which directory the parent process was
running from, so that the subprocess could protect it. However...
When run from a non-main worktree, setup_git_directory() will note
that the discovered git directory
(/PATH/TO/.git/worktree/non-main-worktree) does not match
DEFAULT_GIT_DIR_ENVIRONMENT (see setup_discovered_git_dir()), and
decide to set GIT_DIR in the environment. This matters because...
Whenever git is run with the GIT_DIR environment variable set, and
GIT_WORK_TREE not set, it presumes that '.' is the working tree. So...
This combination results in the subcommand being very confused about
the working tree. Fix it by also setting the GIT_WORK_TREE environment
variable along with setting cmd.dir.
A possibly more involved fix we could consider for later would be to
make setup.c set GIT_WORK_TREE whenever (a) it discovers both the git
directory and the working tree and (b) it decides to set GIT_DIR in the
environment. I did not attempt that here as such would be too big of a
change for a 2.35.1 release.
Test-case-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning a branchless and tagless but not refless remote using
protocol v0 or v1, Git calls transport_fetch_refs() with an empty ref
list. This makes the clone fail with the message "remote transport
reported error".
Git should have refrained from calling transport_fetch_refs(), just like
it does in the case that the remote is refless. Therefore, teach Git to
do this.
In protocol v2, this does not happen because the client passes
ref-prefix arguments that filter out non-branches and non-tags in the
ref advertisement, making the remote appear empty.
Note that this bug concerns logic in builtin/clone.c and only affects
cloning, not fetching.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We added an unrelated sanity checking that leads to a BUG() while
plugging a leak, which triggered in a repository with symrefs in
the local branch namespace that point at a ref outside. Partially
revert the change to avoid triggering the BUG().
* ab/checkout-branch-info-leakfix:
checkout: avoid BUG() when hitting a broken repository
|
|
When 9081a421 (checkout: fix "branch info" memory leaks, 2021-11-16)
cleaned up existing memory leaks, we added an unrelated sanity check
to ensure that a local branch is truly local and not a symref to
elsewhere that dies with BUG() otherwise. This was misguided in two
ways. First of all, such a tightening did not belong to a leak-fix
patch. And the condition it detected was *not* a bug in our program
but a problem in user data, where warning() or die() would have been
more appropriate.
As the condition is not fatal (the result of computing the local
branch name in the code that is involved in the faulty check is only
used as a textual label for the commit), let's revert the code to
the original state, i.e. strip "refs/heads/" to compute the local
branch name if possible, and otherwise leave it NULL. The consumer
of the information in merge_working_tree() is prepared to see NULL
in there and act accordingly.
cf. https://bugzilla.redhat.com/show_bug.cgi?id=2042920
Reported-by: Petr Šplíchal <psplicha@redhat.com>
Reported-by: Todd Zullinger <tmz@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There were two commit_lists created in cmd_merge() that were only
conditionally free()'d. Add a quick conditional call to
free_commit_list() for each of them at the end of the function.
Testing this commit against t6404 under valgrind shows that this patch
fixes the following two leaks:
16 bytes in 1 blocks are definitely lost in loss record 16 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x47FC93: reduce_parents (merge.c:1114)
by 0x4801EE: collect_parents (merge.c:1214)
by 0x480B56: cmd_merge (merge.c:1465)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
by 0x4E7DFA: main (common-main.c:56)
8 (16 direct, 32 indirect) bytes in 1 blocks are definitely lost in \
loss record 61 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x52A8F2: commit_list_insert_by_date (commit.c:620)
by 0x5270AC: get_merge_bases_many_0 (commit-reach.c:413)
by 0x52716C: repo_get_merge_bases (commit-reach.c:438)
by 0x480E5A: cmd_merge (merge.c:1520)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
There are still 3 leaks in chdir_notify_register() after this, but
chdir_notify_register() has been brought up on the list before and folks
were not a fan of fixing those, so I'm not touching them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating the sparse-checkout file, Git does not create the leading
directory, "$GIT_DIR/info", if it does not exist. This causes problems
if the repository does not have that directory. Therefore, ensure that
the leading directory is created.
This is the only "open" in builtin/sparse-checkout.c that does not have
a leading directory check. (The other one in write_patterns_and_update()
does.)
Note that the test needs to explicitly specify a template when running
"git init" because the default template used in the tests has the
"info/" directory included.
Helped-by: Jose Lopes <jabolopes@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
source: <3de40324bea6a1dd9bca2654721471e3809e87d8.1642538935.git.steadmon@google.com>
source: <c3c26192-aee9-185a-e559-b8735139e49c@web.de>
* js/branch-track-inherit:
branch,checkout: fix --track documentation
|
|
Follow the example set by 12909b6b (i18n: turn "options are
incompatible" into "cannot be used together", 2022-01-05) and use
the same message string to reduce the need for translation.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git fetch --negotiate-only` is an implementation detail of push
negotiation and, unlike most `git fetch` invocations, does not actually
update the main repository. Thus it should not update submodules even
if submodule recursion is enabled.
This is not just slow, it is wrong e.g. push negotiation with
"submodule.recurse=true" will cause submodules to be updated because it
invokes `git fetch --negotiate-only`.
Fix this by disabling submodule recursion if --negotiate-only was given.
Since this makes --negotiate-only and --recurse-submodules incompatible,
check for this invalid combination and die.
This does not use the "goto cleanup" introduced in the previous commit
because we want to recurse through submodules whenever a ref is fetched,
and this can happen without introducing new objects.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_fetch() does the following with the assumption that objects are
fetched:
* Run gc
* Write commit graphs (if enabled by fetch.writeCommitGraph=true)
However, neither of these tasks makes sense if objects are not fetched
e.g. `git fetch --negotiate-only` never fetches objects.
Speed up cmd_fetch() by bailing out early if we know for certain that
objects will not be fetched. cmd_fetch() can bail out early whenever
objects are not fetched, but for now this only considers
--negotiate-only.
The same optimization does not apply to `git fetch --dry-run` because
that actually fetches objects; the dry run refers to not updating refs.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace an early return with 'goto cleanup' in cmd_fetch() so that the
string_list is always cleared (the string_list_clear() call is purely
cleanup; the string_list is not reused). This makes cleanup consistent
so that a subsequent commit can use 'goto cleanup' to bail out early.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
* js/branch-track-inherit:
branch,checkout: fix --track usage strings
|
|
As Ævar pointed out in [1], the use of PARSE_OPT_LITERAL_ARGHELP with a
list of allowed parameters is not recommended. Both git-branch and
git-checkout were changed in d311566 (branch: add flags and config to
inherit tracking, 2021-12-20) to use this discouraged combination for
their --track flags.
Fix this by removing PARSE_OPT_LITERAL_ARGHELP, and changing the arghelp
to simply be "mode". Users may discover allowed values in the manual
pages.
[1]: https://lore.kernel.org/git/220111.86a6g3yqf9.gmgdl@evledraar.gmail.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"pull --rebase" internally uses the merge machinery when the other
history is a descendant of ours (i.e. perform fast-forward). This
came from [1], where the discussion was started from a feature
request to do so. It is a bit hard to read the rationale behind it
in the discussion, but it seems that it was an established fact for
everybody involved that does not even need to be mentioned that
fast-forwarding done with "rebase" was much undesirable than done
with "merge", and more importantly, the result left by "merge" is as
good as (or better than) that by "rebase".
Except for one thing. Because "git merge" does not (and should not)
honor rebase.autostash, "git pull" needs to read it and forward it
when we use "git merge" as a (hopefully better) substitute for "git
rebase" during the fast-forwarding. But we forgot to do so (we only
add "--[no-]autostash" to the "git merge" command when "git pull" itself
was invoked with "--[no-]autostash" command line option.
Make sure "git merge" is run with "--autostash" when
rebase.autostash is set and used to fast-forward the history on
behalf of "git rebase". Incidentally this change also takes care of
the case where
- "git pull --rebase" (without other command line options) is run
- "rebase.autostash" is not set
- The history fast-forwards
In such a case, "git merge" is run with an explicit "--no-autostash"
to prevent it from honoring merge.autostash configuration, which is
what we want. After all, we want the "git merge" to pretend as if
it is "git rebase" while being used for this purpose.
[1] https://lore.kernel.org/git/xmqqa8cfbkeq.fsf_-_@gitster.mtv.corp.google.com/
Reported-by: Tilman Vogel <tilman.vogel@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace unconditional index expansion in 'do_reupdate()' with one scoped to
only where a full index is needed. A full index is only required in
'do_reupdate()' when a sparse directory in the index differs from HEAD; in
that case, the index is expanded and the operation restarted.
Because the index should only be expanded if a sparse directory is modified,
add a test ensuring the index is not expanded when differences only exist
within the sparse cone.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable use of the sparse index with `update-index`. Most variations of
`update-index` work without explicitly expanding the index or making any
other updates in or outside of `update-index.c`.
The one usage requiring additional changes is `--cacheinfo`; if a file
inside a sparse directory was specified, the index would not be expanded
until after the cache tree is invalidated, leading to a mismatch between the
index and cache tree. This scenario is handled by rearranging
`add_index_entry_with_check`, allowing `index_name_stage_pos` to expand the
index *before* attempting to invalidate the relevant cache tree path,
avoiding cache tree/index corruption.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Shaoxuan Yuan
Jerry Zhang
Elijah Newren
Chen Bojun
Thomas Gummerer
Robert Coup
Johannes Schindelin
Jonathan Tan
René Scharfe
Glen Choo
Josh Steadmon
Philippe Blain
Victoria Dye