Age | Commit message (Collapse) | Author | Files | Lines |
|
Recent "git am" introduced a double-locking failure when used with
the "--3way" option that invokes rerere machinery.
* jk/am-rerere-lock-fix:
rerere: release lockfile in non-writing functions
|
|
'dt/commit-preserve-base-index-upon-opportunistic-cache-tree-update'
When re-priming the cache-tree opportunistically while committing
the in-core index as-is, we mistakenly invalidated the in-core
index too aggressively, causing the experimental split-index code
to unnecessarily rewrite the on-disk index file(s).
* dt/commit-preserve-base-index-upon-opportunistic-cache-tree-update:
commit: don't rewrite shared index unnecessarily
|
|
Error string fix.
* ah/reflog-typofix-in-error:
reflog: add missing single quote to error message
|
|
Usage string fix.
* ah/read-tree-usage-string:
read-tree: replace bracket set with parentheses to clarify usage
|
|
Usage string fix.
* ah/pack-objects-usage-strings:
pack-objects: place angle brackets around placeholders in usage strings
|
|
There's a bug in builtin/am.c in which we take a lock on
MERGE_RR recursively. But rather than fix am.c, this patch
fixes the confusing interface from rerere.c that caused the
bug. Read on for the gory details.
The setup_rerere() function both reads the existing MERGE_RR
file, and takes MERGE_RR.lock. In the rerere() and
rerere_forget() functions, we end up in write_rr(), which
will then commit the lock file.
But for functions like rerere_clear() that do not write to
MERGE_RR, we expect the caller to have handled
setup_rerere(). That caller would then need to release the
lockfile, but it can't; the lock struct is local to
rerere.c.
For builtin/rerere.c, this is OK. We run a single rerere
operation and then exit immediately, which has the side
effect of rolling back the lockfile.
But in builtin/am.c, this is actively wrong. If we run "git
am -3 --skip", we call setup-rerere twice without releasing
the lock:
1. The "--skip" causes us to call am_rerere_clear(), which
calls setup_rerere(), but never drops the lock.
2. We then proceed to the next patch.
3. The "--3way" may cause us to call rerere() to handle
conflicts in that patch, but we are already holding the
lock. The lockfile code dies with:
BUG: prepare_tempfile_object called for active object
We could fix this by having rerere_clear() call
rollback_lock_file(). But it feels a bit odd for it to roll
back a lockfile that it did not itself take. So let's
simplify the interface further, and handle setup_rerere in
the function itself, taking away the question from the
caller over whether they need to do so.
We can give rerere_gc() the same treatment, as well (even
though it doesn't have any callers besides builtin/rerere.c
at this point). Note that these functions don't take flags
from their callers to pass along to setup_rerere; that's OK,
because the flags would not be meaningful for what they are
doing.
Both of those functions need to hold the lock because even
though they do not write to MERGE_RR, they are still writing
and should be protected from a simultaneous "rerere" run.
But rerere_remaining(), "rerere diff", and "rerere status"
are all read-only operations. They want to setup_rerere(),
but do not care about taking the lock in the first place.
Since our update of MERGE_RR is the usual atomic rename done
by commit_lock_file, they can just do a lockless read. For
that, we teach setup_rerere a READONLY flag to avoid the
lock.
As a bonus, this pushes builtin/rerere.c's setup_rerere call
closer to the functions that use it. Which means that "git
rerere totally-bogus-command" will no longer silently
exit(0) in a repository without rerere enabled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git describe" without argument defaulted to describe the HEAD
commit, but "git describe --contains" didn't. Arguably, in a
repository used for active development, such defaulting would not
be very useful as the tip of branch is typically not tagged, but it
is better to be consistent.
* sg/describe-contains:
describe --contains: default to HEAD when no commit-ish is given
|
|
The client side codepaths in "git push" have been cleaned up
and the user can request to perform an optional "signed push",
i.e. sign only when the other end accepts signed push.
* db/push-sign-if-asked:
push: add a config option push.gpgSign for default signed pushes
push: support signing pushes iff the server supports it
builtin/send-pack.c: use parse_options API
config.c: rename git_config_maybe_bool_text and export it as git_parse_maybe_bool
transport: remove git_transport_options.push_cert
gitremote-helpers.txt: document pushcert option
Documentation/git-send-pack.txt: document --signed
Documentation/git-send-pack.txt: wrap long synopsis line
Documentation/git-push.txt: document when --signed may fail
|
|
"git notes merge" can be told with "--strategy=<how>" option how to
automatically handle conflicts; this can now be configured by
setting notes.mergeStrategy configuration variable.
* jk/notes-merge-config:
notes: teach git-notes about notes.<name>.mergeStrategy option
notes: add notes.mergeStrategy option to select default strategy
notes: add tests for --commit/--abort/--strategy exclusivity
notes: extract parse_notes_merge_strategy to notes-utils
notes: extract enum notes_merge_strategy to notes-utils.h
notes: document cat_sort_uniq rewriteMode
|
|
Recent reimplementation of "git am" changed the format of state
files kept in $GIT_DIR/rebase-apply/ without meaning to do so,
primarily because write_file() API was cumbersome to use and it was
easy to mistakenly make text files with incomplete lines. Update
write_file() interface to make it harder to misuse.
* jc/am-state-fix:
write_file(): drop caller-supplied LF from calls to create a one-liner file
write_file_v(): do not leave incomplete line at the end
write_file(): drop "fatal" parameter
builtin/am: make sure state files are text
builtin/am: introduce write_state_*() helper functions
|
|
"git log --cc" did not show any patch, even though most of the time
the user meant "git log --cc -p -m" to see patch output for commits
with a single parent, and combined diff for merge commits. The
command is taught to DWIM "--cc" (without "--raw" and other forms
of output specification) to "--cc -p -m".
* jc/log-p-cc:
builtin/log.c: minor reformat
log: show merge commit when --cc is given
log: when --cc is given, default to -p unless told otherwise
log: rename "tweak" helpers
|
|
"git rev-list" does not take "--notes" option, but did not complain
when one is given.
* jk/rev-list-has-no-notes:
rev-list: make it obvious that we do not support notes
|
|
The gitmodules API accessed from the C code learned to cache stuff
lazily.
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
|
|
"git config --list" output was hard to parse when values consist of
multiple lines. "--name-only" option is added to help this.
* sg/config-name-only:
get_urlmatch: avoid useless strbuf write
format_config: simplify buffer handling
format_config: don't init strbuf
config: restructure format_config() for better control flow
completion: list variable names reliably with 'git config --name-only'
config: add '--name-only' option to list only variable names
|
|
Remove a cache invalidation which would cause the shared index to be
rewritten on as-is commits.
When the cache-tree has changed, we need to update it. But we don't
necessarily need to update the shared index. So setting
active_cache_changed to SOMETHING_CHANGED is unnecessary. Instead, we
let update_main_cache_tree just update the CACHE_TREE_CHANGED bit.
In order to test this, make test-dump-split-index not segfault on
missing replace_bitmap/delete_bitmap. This new codepath is not called
now that the test passes, but is necessary to avoid a segfault when the
new test is run with the old builtin/commit.c code.
Signed-off-by: David Turner <dturner@twopensource.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
-u and -i can only be given if -m, --reset, or --prefix is given.
Without parentheses, it looks like -u and -i can be used no matter
what, and the second pair of brackets is confusing.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The error message can be seen by running
`git config gc.reflogexpire foo` and then `git reflog expire`.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/calloc-pathspec:
ps_matched: xcalloc() takes nmemb and then element size
|
|
Rewrite "am" in "C".
* pt/am-builtin:
i18n: am: fix typo in description of -b option
|
|
"git am" that was recently reimplemented in C had a performance
regression in "git am --abort" that goes back to the version before
an attempted (and failed) patch application.
* pt/am-builtin-abort-fix:
am --skip/--abort: merge HEAD/ORIG_HEAD tree into index
|
|
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
|
|
The "lockfile" API has been rebuilt on top of a new "tempfile" API.
* mh/tempfile:
credential-cache--daemon: use tempfile module
credential-cache--daemon: delete socket from main()
gc: use tempfile module to handle gc.pid file
lock_repo_for_gc(): compute the path to "gc.pid" only once
diff: use tempfile module
setup_temporary_shallow(): use tempfile module
write_shared_index(): use tempfile module
register_tempfile(): new function to handle an existing temporary file
tempfile: add several functions for creating temporary files
prepare_tempfile_object(): new function, extracted from create_tempfile()
tempfile: a new module for handling temporary files
commit_lock_file(): use get_locked_file_path()
lockfile: add accessor get_lock_file_path()
lockfile: add accessors get_lock_file_fd() and get_lock_file_fp()
create_bundle(): duplicate file descriptor to avoid closing it twice
lockfile: move documentation to lockfile.h and lockfile.c
|
|
After "git am --opt1" stops, running "git am --opt2" pays attention
to "--opt2" only for the patch that caused the original invocation
to stop.
* pt/am-builtin-options:
am: let --signoff override --no-signoff
am: let command-line options override saved options
test_terminal: redirect child process' stdin to a pty
|
|
When linked worktree is used, simultaneous "notes merge" instances
for the same ref in refs/notes/* are prevented from stomping on
each other.
* dt/notes-multiple:
notes: handle multiple worktrees
worktrees: add find_shared_symref
|
|
Two logical lines that were not overly long was split in the middle,
which made them read worse.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the callsites covered by this change call write_file() or
write_file_gently() to create a one-liner file. Drop the caller
supplied LF and let these callees to append it as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All existing callers to this function use it to produce a text file
or an empty file, and a new callsite that mimick them must end their
payload with a LF. If they forget to do so, the resulting file will
end with an incomplete line.
Teach write_file_v() to complete the incomplete line, if exists, so
that the callers do not have to.
With this, the caller-side fix in builtin/am.c becomes unnecessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git describe --contains' doesn't default to HEAD when no commit is
given, and it doesn't produce any output, not even an error:
~/src/git ((v2.5.0))$ ./git describe --contains
~/src/git ((v2.5.0))$ ./git describe --contains HEAD
v2.5.0^0
Unlike other 'git describe' options, the '--contains' code path is
implemented by calling 'name-rev' with a bunch of options plus all the
commit-ishes that were passed to 'git describe'. If no commit-ish was
present, then 'name-rev' got invoked with none, which then leads to the
behavior illustrated above.
Porcelain commands usually default to HEAD when no commit-ish is given,
and 'git describe' already does so in all other cases, so it should do
so with '--contains' as well.
Pass HEAD to 'name-rev' when no commit-ish is given on the command line
to make '--contains' behave consistently with other 'git describe'
options. While at it, use argv_array_pushv() instead of the loop to
pass commit-ishes to 'git name-rev'.
'git describe's short help already indicates that the commit-ish is
optional, but the synopsis in the man page doesn't, so update it
accordingly as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All callers except three passed 1 for the "fatal" parameter to ask
this function to die upon error, but to a casual reader of the code,
it was not all obvious what that 1 meant. Instead, split the
function into two based on a common write_file_v() that takes the
flag, introduce write_file_gently() as a new way to attempt creating
a file without dying on error, and make three callers to call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We forgot to terminate the payload given to write_file() with LF,
resulting in files that end with an incomplete line. Teach the
wrappers builtin/am uses to make sure it adds LF at the end as
necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many calls to write_file() that repeat the same pattern in
the implementation of the builtin version of "am". They all share
the same traits, i.e they
- produce a text file with a single string in it;
- have enough information to produce the entire contents of that
file;
- generate the pathname of the file by making a call to am_path(); and
- they ask write_file() to die() upon failure.
The slight differences among the call sites throw them into roughly
three categories:
- many write either "t" or "f" based on a boolean value to a file;
- some write the integer value in decimal text;
- some others write more general string, e.g. an object name in
hex, an empty string (i.e. the presense of the file itself serves
as a flag), etc.
Introduce three helpers, write_state_bool(), write_state_count() and
write_state_text(), to reduce direct calls to write_file().
This is a preparatory step for the next step to ensure that no
"state" file this command leaves in $GIT_DIR is with an incomplete
line at the end.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rev-list command does not have the internal
infrastructure to display notes. Running:
git rev-list --notes HEAD
will silently ignore the "--notes" option. Running:
git rev-list --notes --grep=. HEAD
will crash on an assert. Running:
git rev-list --format=%N HEAD
will place a literal "%N" in the output (it does not even
expand to an empty string).
Let's have rev-list tell the user that it cannot fill the
user's request, rather than silently producing wrong data.
Likewise, let's remove mention of the notes options from the
rev-list documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We defaulted to ignoring merge diffs because long long ago, in a
galaxy far away, we didn't have a great way to show the diffs. The
whole "--cc" option goes back to January '06 and commit d8f4790e6fe7
("diff-tree --cc: denser combined diff output for a merge commit").
And before that option - so for about 8 months - we had no good way
to show the diffs of merges in a good dense way. So the whole
"don't show diffs for merges by default" actually made a lot of
sense originally, because our merge diffs were not very useful.
And this was carried forward to this day. "git log --cc" still
ignores merge commits, and you need to say "git log -m --cc" to view
a sensible rendition of merge and non-merge commits, even with the
previous change to make "--cc" imply "-p".
Teach "git log" that "--cc" means the user wants to see interesting
changes in merge commits by turning "-m" on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--cc" option to "git log" is clearly a request to show some
sort of combined diff (be it --patch or --raw), but traditionally
we required the command line to explicitly ask for "git log -p --cc".
Teach the command line parser to treat a lone "--cc" as if the user
specified "-p --cc". Formats that do ask for other forms of diff
output, e.g. "log --raw --cc", are not overriden.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The revision walking API allows the callers to tweak its
configuration at the last minute, immediately after all the revision
and pathspec parameters are parsed from the command line but before
the default actions are decided based on them, by defining a "tweak"
callback function when calling setup_revisions(). Traditionally,
this facility was used by "git show" to turn on the patch output
"-p" by default when no diff output option (e.g. "--raw" or "-s" to
squelch the output altogether) is given on the command line, and
further give dense combined diffs "--cc" for merge commits when no
option to countermand it (e.g. "-m" to show pairwise patches).
Recently, "git log" started using the same facility, but we named
the callback function "default_follow_tweak()", as if the only kind
of tweaking we would want for "git log" will forever be limited to
turning "--follow" on by default when told by a configuration
variable. That was myopic.
Rename it to more generic name "log_setup_revisions_tweak()", and
match the one used by show "show_setup_revisions_tweak()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We create a strbuf only to insert a single string, pass the
resulting buffer to a function (which does not modify the
string), and then free it. We can just pass the original
string instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When formatting a config value into a strbuf, we may end
up stringifying it into a fixed-size buffer using sprintf,
and then copying that buffer into the strbuf. We can
eliminate the middle-man (and drop some calls to sprintf!)
by writing directly to the strbuf.
The reason it was written this way in the first place is
that we need to know before writing the value whether to
insert a delimiter. Instead of delaying the write of the
value, we speculatively write the delimiter, and roll it
back in the single case that cares.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's unusual for a function which writes to a passed-in
strbuf to call strbuf_init; that will throw away anything
already there, leaking memory. In this case, there are
exactly two callers; one relies on this initialization and
the other passes in an already-initialized buffer.
There's no leak, as the initialized buffer doesn't have
anything in it. But let's bump the strbuf_init out to the
one caller who needs it, making format_config more
idiomatic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 578625fa91 (config: add '--name-only' option to list only
variable names, 2015-08-10) modified format_config() such that it
returned from the middle of the function when showing only keys,
resulting in ugly code structure.
Reorganize the if statements and dealing with the key-value delimiter to
make the function easier to read.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though multiplication is commutative, the order of arguments
should be xcalloc(nmemb, size). ps_matched is an array of 1-byte
element whose size is the same as the number of pathspec elements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
|
|
Long overdue micro clean-up.
* jc/finalize-temp-file:
sha1_file.c: rename move_temp_to_file() to finalize_object_file()
|
|
"git clone $URL", when cloning from a site whose sole purpose is to
host a single repository (hence, no path after <scheme>://<site>/),
tried to use the site name as the new repository name, but did not
remove username or password when <site> part was of the form
<user>@<pass>:<host>. The code is taught to redact these.
* ps/guess-repo-name-at-root:
clone: abort if no dir name could be guessed
clone: do not use port number as dir name
clone: do not include authentication data in guessed dir
|
|
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
|
|
* sb/remove-unused-var-from-builtin-add:
add: remove dead code
|
|
The "rev-parse --parseopt" mode parsed the option specification
and the argument hint in a strange way to allow '=' and other
special characters in the option name while forbidding them from
the argument hint. This made it impossible to define an option
like "--pair <key>=<value>" with "pair=key=value" specification,
which instead would have defined a "--pair=key <value>" option.
* ib/scripted-parse-opt-better-hint-string:
rev-parse --parseopt: allow [*=?!] in argument hints
|
|
The low-level "git send-pack" did not honor 'user.signingkey'
configuration variable when sending a signed-push.
* db/send-pack-user-signingkey:
builtin/send-pack.c: respect user.signingkey
|
|
An attempt to delete a ref by pushing into a repositorywhose HEAD
symbolic reference points at an unborn branch that cannot be
created due to ref D/F conflict (e.g. refs/heads/a/b exists, HEAD
points at refs/heads/a) failed.
* jx/do-not-crash-receive-pack-wo-head:
receive-pack: crash when checking with non-exist HEAD
|