| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code clean-up.
* ps/grep-help-all-callback-arg:
grep: correctly initialize help-all option
|
|
This reverts commit 2bf15a3330a26183adc8563dbeeacc11294b8a01, whose
intention was good, but the verbosity levels used in merge-recursive
turns out to be rather uneven. For example, a merge of two branches
with conflicting submodule updates used to report CONFLICT: output
with --quiet but no longer (which *is* desired), while the final
"Automatic merge failed; fix conflicts and then commit" message is
still shown even with --quiet (which *is* inconsistent).
Originally reported by Bryan Turner; it is too early to declare what
the concensus is, but it seems that we would need to level the
verbosity levels used in merge strategy backends before we can go
forward. In the meantime, we'd revert to the old behaviour until
that happens.
cf. $gmane/267245
|
|
"git merge --quiet" did not squelch messages from the underlying
merge-recursive strategy.
* jk/merge-quiet:
merge: pass verbosity flag down to merge-recursive
|
|
A push into an unborn branch, with "receive.denyCurrentBranch" set
to "updateInstead", did not check out the working tree as expected.
* jc/update-instead-into-void:
push-to-deploy: allow pushing into an unborn branch and updating it
|
|
The "help-all" option is being initialized with a wrong value.
While being semantically wrong this can also cause a segmentation
fault in gcc on ARMv7 hardfloat platforms with a hardened
toolchain. Fix this by initializing with a NULL value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes "git merge --quiet" really quiet when we call
into merge-recursive.
Note that we can't just pass our flag down as-is; the two
parts of the code use different scales. We center at "0" as
normal for git-merge (with "--quiet" giving a negative
value), but merge-recursive uses "2" as its center. This
patch passes a negative value to merge-recursive rather than
"1", though, as otherwise the user would have to use "-qqq"
to squelch all messages (but the downside is that the user
cannot distinguish between levels 0-2 if without resorting
to the GIT_MERGE_VERBOSITY variable).
We may want to review and renormalize the message severities
in merge-recursive, but that does not have to happen now.
This is at least in improvement in the sense that we are
respecting "--quiet" at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Setting receive.denycurrentbranch to updateinstead and pushing into
the current branch, when the working tree and the index is truly
clean, is supposed to reset the working tree and the index to match
the tree of the pushed commit. This did not work when pushing into
an unborn branch.
The code that drives push-to-checkout hook needs no change, as the
interface is defined so that hook can decide what to do when the
push is coming to an unborn branch and take an appropriate action
since the beginning.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
|
|
Code clean-up.
* jc/report-path-error-to-dir:
report_path_error(): move to dir.c
|
|
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
|
|
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
|
|
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
|
|
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
|
|
"git tag -h" used to show the "--column" and "--sort" options
that are about listing in a wrong section.
* jk/tag-h-column-is-a-listing-option:
tag: fix some mis-organized options in "-h" listing
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
oldlines is allocated earlier in the function and also freed on the
successful code path.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`old` is not used outside the loop and would get lost
once we reach the goto.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* sb/leaks:
builtin/help.c: fix memory leak
bundle.c: fix memory leak
connect.c: do not leak "conn" after showing diagnosis
|
|
Portability fixes and workarounds for shell scripts have been added
to help BSD-derived systems.
* km/bsd-shells:
t5528: do not fail with FreeBSD shell
help.c: use SHELL_PATH instead of hard-coded "/bin/sh"
git-compat-util.h: move SHELL_PATH default into header
git-instaweb: use @SHELL_PATH@ instead of /bin/sh
git-instaweb: allow running in a working tree subdirectory
|
|
"git branch" on a detached HEAD always said "(detached from xyz)",
even when "git status" would report "detached at xyz". The HEAD is
actually at xyz and haven't been moved since it was detached in
such a case, but the user cannot read what the current value of
HEAD is when "detached from" is used.
* mg/detached-head-report:
branch: name detached HEAD analogous to status
wt-status: refactor detached HEAD analysis
|
|
If we are repacking with "-ad", we will drop any unreachable
objects. Likewise, using "-Ad --unpack-unreachable=<time>"
will drop any old, unreachable objects. In these cases, we
want to make sure the reachability we compute with "--all"
is complete. We can do this by passing GIT_REF_PARANOIA=1 in
the environment to pack-objects.
Note that "-Ad" is safe already, because it only loosens
unreachable objects. It is up to "git prune" to avoid
deleting them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prune should know about broken objects at the tips of refs,
so that we can feed them to our traversal rather than
ignoring them. It's better for us to abort the operation on
the broken object than it is to start deleting objects with
an incomplete view of the reachability namespace.
Note that for missing objects, aborting is the best we can
do. For a badly-named ref, we technically could use its sha1
as a reachability tip. However, the iteration code just
feeds us a null sha1, so there would be a reasonable amount
of code involved to pass down our wishes. It's not really
worth trying to do better, because this is a case that
should happen extremely rarely, and the message we provide:
fatal: unable to parse object: refs/heads/bogus:name
is probably enough to point the user in the right direction.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not usually end our errors with a full stop, but it
looks especially bad when you use die_errno, which adds a
colon, like:
fatal: could not create work tree dir 'foo'.: No such file or directory
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If clone fails, we generally try to clean up any directories
we've created. We do this by installing an atexit handler,
so that we don't have to manually trigger cleanup. However,
since we install this after touching the filesystem, any
errors between our initial mkdir() and our atexit() call
will result in us leaving a crufty directory around.
We can fix this by moving our atexit() call earlier. It's OK
to do it before the junk_work_tree variable is set, because
remove_junk makes sure the variable is initialized. This
means we "activate" the handler by assigning to the
junk_work_tree variable, which we now bump down to just
after we call mkdir(). We probably do not want to do it
before, because a plausible reason for mkdir() to fail is
EEXIST (i.e., we are racing with another "git init"), and we
would not want to remove their work.
OTOH, this is probably not that big a deal; we will allow
cloning into an empty directory (and skip the mkdir), which
is already racy (i.e., one clone may see the other's empty
dir and start writing into it). Still, it does not hurt to
err on the side of caution here.
Note that writing into junk_work_tree and junk_git_dir after
installing the handler is also technically racy, as we call
our handler on an async signal. Depending on the platform,
we could see a sheared write to the variables. Traditionally
we have not worried about this, and indeed we already do
this later in the function. If we want to address that, it
can come as a separate topic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When grep is called with the --quiet option, the pager is initialized
despite not being used. When the pager is "less", anything output by
previous commands and not ended with a newline is overwritten:
$ echo -n aaa; echo bbb
aaabbb
$ echo -n aaa; git grep -q foo; echo bbb
bbb
This can be worked around, for example, by making sure STDOUT is not a
TTY or more directly by setting git's pager to "cat":
$ echo -n aaa; git grep -q foo > /dev/null; echo bbb
aaabbb
$ echo -n aaa; PAGER=cat git grep -q foo; echo bbb
aaabbb
But prevent calling the pager in the first place, which would also
save an unnecessary fork().
Signed-off-by: Wilhelm Schuermann <wimschuermann@googlemail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification.
* rs/deflate-init-cleanup:
zlib: initialize git_zstream in git_deflate_init{,_gzip,_raw}
|
|
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Description given by "grep -h" for its --exclude-standard option
was phrased poorly.
* nd/grep-exclude-standard-help-fix:
grep: correct help string for --exclude-standard
|
|
"git apply" was not very careful about reading from, removing,
updating and creating paths outside the working tree (under
--index/--cached) or the current directory (when used as a
replacement for GNU patch).
* jc/apply-beyond-symlink:
apply: do not touch a file beyond a symbolic link
apply: do not read from beyond a symbolic link
apply: do not read from the filesystem under --index
apply: reject input that touches outside the working area
|
|
Running "git tag -h" currently prints:
[...]
Tag creation options
[...]
--column[=<style>] show tag list in columns
--sort <type> sort tags
Tag listing options
--contains <commit> print only tags that contain the commit
--points-at <object> print only tags of the object
The "--column" and "--sort" options should go under the "Tag listing" group.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user has set SHELL_PATH in the Makefile then we
should respect that value and use it.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various issues around "reflog expire", e.g. using --updateref when
expiring a reflog for a symbolic reference, have been corrected
and/or made saner.
* mh/expire-updateref-fixes:
reflog_expire(): never update a reference to null_sha1
reflog_expire(): ignore --updateref for symbolic references
reflog: improve and update documentation
struct ref_lock: delete the force_write member
lock_ref_sha1_basic(): do not set force_write for missing references
write_ref_sha1(): move write elision test to callers
write_ref_sha1(): remove check for lock == NULL
|
|
The prompt string "remove?" used when "git clean -i" asks the user
if a path should be removed was localizable, but the code always
expects a substring of "yes" to tell it to go ahead. Always show
[y/N] as part of this prompt to hint that the answer is not (yet)
localized.
* ja/clean-confirm-i18n:
Add hint interactive cleaning
|
|
Description given by "grep -h" for its --exclude-standard option
was phrased poorly.
* nd/grep-exclude-standard-help-fix:
grep: correct help string for --exclude-standard
|
|
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
|
|
"git status" carefully names a detached HEAD "at" resp. "from" a rev or
ref depending on whether the detached HEAD has moved since. "git branch"
always uses "from", which can be confusing, because a status-aware user
would interpret this as moved detached HEAD.
Make "git branch" use the same logic and wording.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git blame" died, trying to free an uninitialized piece of memory.
* es/blame-commit-info-fix:
builtin/blame: destroy initialized commit_info only
|
|
"git merge-file" did not work correctly in a subdirectory.
* ab/merge-file-prefix:
merge-file: correctly open files when in a subdir
|
|
Code clean-up.
* dp/remove-duplicated-header-inclusion:
do not include the same header twice
|
|
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
|
|
Simplify the ref transaction API around how "the ref should be
pointing at this object" is specified.
* mh/refs-have-new:
refs.h: remove duplication in function docstrings
update_ref(): improve documentation
ref_transaction_verify(): new function to check a reference's value
ref_transaction_delete(): check that old_sha1 is not null_sha1
ref_transaction_create(): check that new_sha1 is valid
commit: avoid race when creating orphan commits
commit: add tests of commit races
ref_transaction_delete(): remove "have_old" parameter
ref_transaction_update(): remove "have_old" parameter
struct ref_update: move "have_old" into "flags"
refs.c: change some "flags" to "unsigned int"
refs: remove the gap in the REF_* constant values
refs: move REF_DELETING to refs.c
|
|
Revamp the "git reflog" usage documentation in the manpage and the
command help to match the current reality and improve its clarity:
* Add documentation for some options that had been left out.
* Group the subcommands and options more logically and move more
common subcommands/options higher.
* Improve some explanations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git apply --whitespace=fix" fixed whitespace errors in the common
context lines but did so without reporting.
* jc/apply-ws-fix-expands-report:
apply: detect and mark whitespace errors in context lines when fixing
|
|
"git apply" was not very careful about reading from, removing,
updating and creating paths outside the working tree (under
--index/--cached) or the current directory (when used as a
replacement for GNU patch).
* jc/apply-beyond-symlink:
apply: do not touch a file beyond a symbolic link
apply: do not read from beyond a symbolic link
apply: do not read from the filesystem under --index
apply: reject input that touches outside the working area
|
|
For translators, specify that a [y/N] reply is needed.
Also capitalize the first word in the prompt, as all the other
interactive prompts from this command are capitalized.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current help string is about --no-exclude-standard. But "git grep -h"
would show --exclude-standard instead. Flip the string. See 0a93fb8
(grep: teach --untracked and --exclude-standard options - 2011-09-27)
for more info about these options.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* dp/remove-duplicated-header-inclusion:
do not include the same header twice
|
Junio C Hamano
Patrick Steinhardt
Jeff King
Stefan Beller
Wilhelm Schuermann
Dave Olszewski
Kyle J. McKay
Michael J Gruber
René Scharfe
Michael Haggerty
Jean-Noel Avila
Nguyễn Thái Ngọc Duy