| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The 'meld' backend of the "git mergetool" learned to give the
underlying 'meld' the '--auto-merge' option, which would help
reduce the amount of text that requires manual merging.
* ls/mergetool-meld-auto-merge:
mergetool: allow auto-merge for meld to follow the vim-diff behavior
|
|
"git index-pack" learned to resolve deltified objects with greater
parallelism.
* jt/threaded-index-pack:
index-pack: make quantum of work smaller
index-pack: make resolve_delta() assume base data
index-pack: calculate {ref,ofs}_{first,last} early
index-pack: remove redundant child field
index-pack: unify threaded and unthreaded code
index-pack: remove redundant parameter
Documentation: deltaBaseCacheLimit is per-thread
|
|
"format-patch --range-diff=<prev> <origin>..HEAD" has been taught
not to ignore <origin> when <prev> is a single version.
* es/format-patch-interdiff-cleanup:
format-patch: use 'origin' as start of current-series-range when known
diff-lib: tighten show_interdiff()'s interface
diff: move show_interdiff() from its own file to diff-lib
|
|
Optimization around submodule handling.
* os/fetch-submodule-optim:
fetch: do not look for submodule changes in unchanged refs
|
|
Unlike "git config --local", "git config --worktree" did not fail
early and cleanly when started outside a git repository.
* mt/config-fail-nongit-early:
config: complain about --worktree outside of a git repo
|
|
"git status --short" quoted a path with SP in it when tracked, but
not those that are untracked, ignored or unmerged. They are all
shown quoted consistently.
* jc/quote-path-cleanup:
quote: turn 'nodq' parameter into a set of flags
quote: rename misnamed sq_lookup[] to cq_lookup[]
wt-status: consistently quote paths in "status --short" output
quote_path: code clarification
quote_path: optionally allow quoting a path with SP in it
quote_path: give flags parameter to quote_path()
quote_path: rename quote_path_relative() to quote_path()
|
|
"git worktree add" learns that the "-d" is a synonym to "--detach"
option to create a new worktree without being on a branch.
* es/wt-add-detach:
git-worktree.txt: discuss branch-based vs. throwaway worktrees
worktree: teach `add` to recognize -d as shorthand for --detach
git-checkout.txt: document -d short option for --detach
|
|
The "add -i/-p" machinery has been written in C but it is not used
by default yet. It is made default to those who are participating
in feature.experimental experiment.
* jc/add-i-use-builtin-experimental:
add -i: use the built-in version when feature.experimental is set
|
|
Leakfix.
* rs/refspec-leakfix:
refspec: add and use refspec_appendf()
push: release strbufs used for refspec formatting
|
|
Misc cleanups.
* rs/misc-cleanups:
pack-bitmap-write: use hashwrite_be32() in write_hash_cache()
midx: use hashwrite_u8() in write_midx_header()
fast-import: use write_pack_header()
|
|
Make the mergetool used with "meld" backend behave similarly to "vimdiff" by
telling it to auto-merge non-conflicting parts and highlight the conflicting
parts when `mergetool.meld.useAutoMerge` is configured with `true`, or `auto`
for detecting the `--auto-merge` option automatically.
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Lin Sun <lin.sun@zoom.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The quote_path() function computes a path (relative to its base
directory) and c-quotes the result if necessary. Teach it to take a
flags parameter to allow its behaviour to be enriched later.
No behaviour change intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no quote_path_absolute() or anything that causes confusion,
and one of the two large consumers already rename the long name
locally with a preprocessor macro.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
|
|
Fixups to a topic in 'next'.
* ss/submodule-summary-in-c-fixes:
t7421: eliminate 'grep' check in t7421.4 for mingw compatibility
submodule: fix style in function definition
submodule: eliminate unused parameters from print_submodule_summary()
|
|
"git worktree" gained a "repair" subcommand to help users recover
after moving the worktrees or repository manually without telling
Git. Also, "git init --separate-git-dir" no longer corrupts
administrative data related to linked worktrees.
* es/worktree-repair:
init: make --separate-git-dir work from within linked worktree
init: teach --separate-git-dir to repair linked worktrees
worktree: teach "repair" to fix outgoing links to worktrees
worktree: teach "repair" to fix worktree back-links to main worktree
worktree: add skeleton "repair" command
|
|
Leakfix.
* jk/worktree-check-clean-leakfix:
worktree: fix leak in check_clean_worktree()
|
|
When a packfile is removed by "git repack", multi-pack-index gets
cleared; the code was taught to do so less aggressively by first
checking if the midx actually refers to a pack that no longer
exists.
* tb/repack-clearing-midx:
midx: traverse the local MIDX first
builtin/repack.c: invalidate MIDX only when necessary
|
|
Yet another subcommand of "git submodule" is getting rewritten in C.
* ss/submodule-summary-in-c:
submodule: port submodule subcommand 'summary' from shell to C
t7421: introduce a test script for verifying 'summary' output
submodule: rename helper functions to avoid ambiguity
submodule: remove extra line feeds between callback struct and macro
|
|
Running `git config --worktree` outside of a git repository hits a BUG()
when trying to enumerate the worktrees. Let's catch this error earlier
and die() with a friendlier message.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, when index-pack resolves deltas, it does not split up delta
trees into threads: each delta base root (an object that is not a
REF_DELTA or OFS_DELTA) can go into its own thread, but all deltas on
that root (direct or indirect) are processed in the same thread.
This is a problem when a repository contains a large text file (thus,
delta-able) that is modified many times - delta resolution time during
fetching is dominated by processing the deltas corresponding to that
text file.
This patch contains a solution to that. When cloning using
git -c core.deltabasecachelimit=1g clone \
https://fuchsia.googlesource.com/third_party/vulkan-cts
on my laptop, clone time improved from 3m2s to 2m5s (using 3 threads,
which is the default).
The solution is to have a global work stack. This stack contains delta
bases (objects, whether appearing directly in the packfile or generated
by delta resolution, that themselves have delta children) that need to
be processed; whenever a thread needs work, it peeks at the top of the
stack and processes its next unprocessed child. If a thread finds the
stack empty, it will look for more delta base roots to push on the stack
instead.
The main weakness of having a global work stack is that more time is
spent in the mutex, but profiling has shown that most time is spent in
the resolution of the deltas themselves, so this shouldn't be an issue
in practice. In any case, experimentation (as described in the clone
command above) shows that this patch is a net improvement.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When formatting a patch series over `origin..HEAD`, one would expect
that range to be used as the current-series-range when computing a
range-diff between the previous and current versions of a patch series.
However, infer_range_diff_ranges() ignores `origin..HEAD` when
--range-diff=<prev> specifies a single revision rather than a range, and
instead unexpectedly computes the current-series-range based upon
<prev>. Address this anomaly by unconditionally using `origin..HEAD` as
the current-series-range regardless of <prev> as long as `origin` is
known, and only fall back to basing current-series-range on <prev> when
`origin` is not known.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To compute and show an interdiff, show_interdiff() needs only the two
OID's to compare and a diffopts, yet it expects callers to supply an
entire rev_info. The demand for rev_info is not only overkill, but also
places unnecessary burden on potential future callers which might not
otherwise have a rev_info at hand. Address this by tightening its
signature to require only the items it needs instead of a full rev_info.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
show_interdiff() is a relatively small function and not likely to grow
larger or more complicated. Rather than dedicating an entire source file
to it, relocate it to diff-lib.c which houses other "take two things and
compare them" functions meant to be re-used but not so low-level as to
reside in the core diff implementation.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have had parallel implementations of "add -i/-p" since 2.25 and
have been using them from various codepaths since 2.26 days, but
never made the built-in version the default.
We have found and fixed a handful of corner case bugs in the
built-in version, and it may be a good time to start switching over
the user base from the scripted version to the built-in version.
Let's enable the built-in version for those who opt into the
feature.experimental guinea-pig program to give wider exposure.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Like `git switch` and `git checkout`, `git worktree add` can check out a
branch or set up a detached HEAD. However, unlike those other commands,
`git worktree add` does not understand -d as shorthand for --detach,
which may confound users accustomed to using -d for this purpose.
Address this shortcoming by teaching `add` to recognize -d for --detach,
thus bringing it in line with the other commands.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Call write_pack_header() to hash and write a pack header instead of
open-coding this function. This gets rid of duplicate code and of the
magic version number 2 -- which has been used here since c90be46abd
(Changed fast-import's pack header creation to use pack.h, 2006-08-16)
and in pack.h (again) since 29f049a0c2 (Revert "move pack creation to
version 3", 2006-10-14).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function for building a refspec using printf-style formatting. It
frees callers from managing their own buffer. Use it throughout the
tree to shorten and simplify its callers.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
map_refspec() either returns the passed in ref string or a detached
strbuf. This makes it hard for callers to release the possibly
allocated memory, and set_refspecs() consequently leaks it.
Let map_refspec() append any refspecs directly and release its own
strbufs after use. Rename it to refspec_append_mapped() and don't
return anything to reflect its increased responsibility.
set_refspecs() also leaks its strbufs. Do the same here and directly
call refspec_append() in each if branch instead of holding onto a
detached strbuf, then dispose of the allocated memory after use. We
need to add an else branch for the final call because all the other
conditional branches already add their formatted refspec now.
setup_push_upstream() and setup_push_current() forgot to release their
strbufs as well; plug these leaks, too, while at it.
None of these leaks were likely to impact users, because the number
and sizes of refspecs are usually small and the allocations are only
done once per program run. Clean them up nevertheless, as another
step on the long road towards zero memory leaks.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching recursively with submodules, for each ref in the
superproject, we call check_for_new_submodule_commits() which collects all
the objects that have to be checked for submodule changes on
calculate_changed_submodule_paths(). On the first call, it also collects all
the existing refs for excluding them from the scan.
calculate_changed_submodule_paths() creates an argument array with all the
collected new objects, followed by --not and all the old objects. This argv
is passed to setup_revisions, which parses each argument, converts it back
to an oid and resolves the object. The parsing itself also does redundant
work, because it is treated like user input, while in fact it is a full
oid. So it needlessly attempts to look it up as ref (checks if it has ^, ~
etc.), checks if it is a file name etc.
For a repository with many refs, all of this is expensive. But if the fetch
in the superproject did not update the ref (i.e. the objects that are
required to exist in the submodule did not change), there is no need to
include it in the list.
Before commit be76c212 (fetch: ensure submodule objects fetched,
2018-12-06), submodule reference changes were only detected for refs that
were changed, but not for new refs. This commit covered also this case, but
what it did was to just include every ref.
This change should reduce the number of scanned refs by about half (except
the case of a no-op fetch, which will not scan any ref), because all the
existing refs will still be listed after --not.
The regression was reported here:
https://public-inbox.org/git/CAGHpTBKSUJzFSWc=uznSu2zB33qCSmKXM-
iAjxRCpqNK5bnhRg@mail.gmail.com/
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* hl/bisect-doc-clarify-bad-good-ordering:
bisect: swap command-line options in documentation
|
|
Updates to on-demand fetching code in lazily cloned repositories.
* jt/lazy-fetch:
fetch: no FETCH_HEAD display if --no-write-fetch-head
fetch-pack: remove no_dependents code
promisor-remote: lazy-fetch objects in subprocess
fetch-pack: do not lazy-fetch during ref iteration
fetch: only populate existing_refs if needed
fetch: avoid reading submodule config until needed
fetch: allow refspecs specified through stdin
negotiator/noop: add noop fetch negotiator
|
|
A handful of places in in-tree code still relied on being able to
execute the git subcommands, especially built-ins, in "git-foo"
form, which have been corrected.
* jc/undash-in-tree-git-callers:
credential-cache: use child_process.args
cvsexportcommit: do not run git programs in dashed form
transport-helper: do not run git-remote-ext etc. in dashed form
|
|
Trim an unused binary and turn a bunch of commands into built-in.
* jk/slimmed-down:
drop vcs-svn experiment
make git-fast-import a builtin
make git-bugreport a builtin
make credential helpers builtins
Makefile: drop builtins from MSVC pdb list
|
|
"git rebase -i" learns a bit more options.
* pw/rebase-i-more-options:
t3436: do not run git-merge-recursive in dashed form
rebase: add --reset-author-date
rebase -i: support --ignore-date
rebase -i: support --committer-date-is-author-date
am: stop exporting GIT_COMMITTER_DATE
rebase -i: add --ignore-whitespace flag
|
|
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
887952b8c6 ("fetch: optionally allow disabling FETCH_HEAD update",
2020-08-18) introduced the ability to disable writing to FETCH_HEAD
during fetch, but did not suppress the "<source> -> FETCH_HEAD" message
when this ability is used. This message is misleading in this case,
because FETCH_HEAD is not written. Also, because "fetch" is used to
lazy-fetch missing objects in a partial clone, this significantly
clutters up the output in that case since the objects to be fetched are
potentially numerous.
Therefore, suppress this message when --no-write-fetch-head is passed
(but not when --dry-run is set).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git restore/checkout --no-overlay" with wildcarded pathspec
mistakenly removed matching paths in subdirectories, which has been
corrected.
* rs/checkout-no-overlay-pathspec-fix:
checkout, restore: make pathspec recursive
|
|
Preliminary code clean-up before introducing "negative refspec".
* jk/refspecs-cleanup:
refspec: make sure stack refspec_item variables are zeroed
refspec: fix documentation referring to refspec_item
|
|
Accesses to two pseudorefs have been updated to properly use ref
API.
* hn/refs-pseudorefs:
sequencer: treat REVERT_HEAD as a pseudo ref
builtin/commit: suggest update-ref for pseudoref removal
sequencer: treat CHERRY_PICK_HEAD as a pseudo ref
refs: make refs_ref_exists public
|
|
Long ago, we decided to use 3 threads by default when running the
index-pack task in parallel, which has been adjusted a bit upwards.
* jk/index-pack-w-more-threads:
index-pack: adjust default threading cap
p5302: count up to online-cpus for thread tests
p5302: disable thread-count parameter tests by default
|
|
The intention of `git init --separate-work-dir=<path>` is to move the
.git/ directory to a location outside of the main worktree. When used
within a linked worktree, however, rather than moving the .git/
directory as intended, it instead incorrectly moves the worktree's
.git/worktrees/<id> directory to <path>, thus disconnecting the linked
worktree from its parent repository and breaking the worktree in the
process since its local .git file no longer points at a location at
which it can find the object database. Fix this broken behavior.
An intentional side-effect of this change is that it also closes a
loophole not caught by ccf236a23a (init: disallow --separate-git-dir
with bare repository, 2020-08-09) in which the check to prevent
--separate-git-dir being used in conjunction with a bare repository was
unable to detect the invalid combination when invoked from within a
linked worktree. Therefore, add a test to verify that this loophole is
closed, as well.
Reported-by: Henré Botha <henrebotha@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A linked worktree's .git file is a "gitfile" pointing at the
.git/worktrees/<id> directory within the repository. When `git init
--separate-git-dir=<path>` is used on an existing repository to relocate
the repository's .git/ directory to a different location, it neglects to
update the .git files of linked worktrees, thus breaking the worktrees
by making it impossible for them to locate the repository. Fix this by
teaching --separate-git-dir to repair the .git file of each linked
worktree to point at the new repository location.
Reported-by: Henré Botha <henrebotha@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The .git/worktrees/<id>/gitdir file points at the location of a linked
worktree's .git file. Its content must be of the form
/path/to/worktree/.git (from which the location of the worktree itself
can be derived by stripping the "/.git" suffix). If the gitdir file is
deleted or becomes corrupted or outdated, then Git will be unable to
find the linked worktree. An easy way for the gitdir file to become
outdated is for the user to move the worktree manually (without using
"git worktree move"). Although it is possible to manually update the
gitdir file to reflect the new linked worktree location, doing so
requires a level of knowledge about worktree internals beyond what a
user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
.git/worktrees/<id>/gitdir files automatically. (For this to work, the
command must either be invoked from within the worktree whose gitdir
file requires repair, or from within the main or any linked worktree by
providing the path of the broken worktree as an argument to "git
worktree repair".)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The .git file in a linked worktree is a "gitfile" which points back to
the .git/worktrees/<id> entry in the main worktree or bare repository.
If a worktree's .git file is deleted or becomes corrupted or outdated,
then the linked worktree won't know how to find the repository or any of
its own administrative files (such as 'index', 'HEAD', etc.). An easy
way for the .git file to become outdated is for the user to move the
main worktree or bare repository. Although it is possible to manually
update each linked worktree's .git file to reflect the new repository
location, doing so requires a level of knowledge about worktree
internals beyond what a user should be expected to know offhand.
Therefore, teach "git worktree repair" how to repair broken or outdated
worktree .git files automatically. (For this to work, the command must
be invoked from within the main worktree or bare repository, or from
within a worktree which has not become disconnected from the repository
-- such as one which was created after the repository was moved.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a repository has an alternate object directory configured, callers
can traverse through each alternate's MIDX by walking the '->next'
pointer.
But, when 'prepare_multi_pack_index_one()' loads multiple MIDXs, it
places the new ones at the front of this pointer chain, not at the end.
This can be confusing for callers such as 'git repack -ad', causing test
failures like in t7700.6 with 'GIT_TEST_MULTI_PACK_INDEX=1'.
The occurs when dropping a pack known to the local MIDX with alternates
configured that have their own MIDX. Since the alternate's MIDX is
returned via 'get_multi_pack_index()', 'midx_contains_pack()' returns
true (which is correct, since it traverses through the '->next' pointer
to find the MIDX in the chain that does contain the requested object).
But, we call 'clear_midx_file()' on 'the_repository', which drops the
MIDX at the path of the first MIDX in the chain, which (in the case of
t7700.6 is the one in the alternate).
This patch addresses that by:
- placing the local MIDX first in the chain when calling
'prepare_multi_pack_index_one()', and
- introducing a new 'get_local_multi_pack_index()', which explicitly
returns the repository-local MIDX, if any.
Don't impose an additional order on the MIDX's '->next' pointer beyond
that the first item in the chain must be local if one exists so that we
avoid a quadratic insertion.
Likewise, use 'get_local_multi_pack_index()' in
'remove_redundant_pack()' to fix the formerly broken t7700.6 when run
with 'GIT_TEST_MULTI_PACK_INDEX=1'.
Finally, note that the MIDX ordering invariant is only preserved by the
insertion order in 'prepare_packed_git()', which traverses through the
ODB's '->next' pointer, meaning we visit the local object store first.
This fragility makes this an undesirable long-term solution if more
callers are added, but it is acceptable for now since this is the only
caller.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The positional arguments are specified in this order: "bad" then "good".
To avoid confusion, the options above the positional arguments
are now specified in the same order. They can still be specified in any
order since they're options, not positional arguments.
Signed-off-by: Hugo Locurcio <hugo.locurcio@hugo.pro>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
|
|
The 'grep' check in test 4 of t7421 resulted in the failure of t7421 on
Windows due to a different error message
error: cannot spawn git: No such file or directory
instead of
fatal: exec 'rev-parse': cd to 'my-subm' failed: No such file or directory
Tighten up the check to compute 'src_abbrev' by guarding the
'verify_submodule_committish()' call using `p->status !='D'`, so that
the former isn't called in case of non-existent submodule directory,
consequently, there is no such error message on any execution
environment. The same need not be implemented for 'dst_abbrev' and is
rather redundant since the conditional 'if (S_ISGITLINK(p->mod_dst))'
already guards the 'verify_submodule_committish()' when we have a
status of 'D'.
Therefore, eliminate the 'grep' check in t7421. Instead, verify the
absence of an error message by doing a 'test_must_be_empty' on the
file containing the error.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Worktree administrative files can become corrupted or outdated due to
external factors. Although, it is often possible to recover from such
situations by hand-tweaking these files, doing so requires intimate
knowledge of worktree internals. While information necessary to make
such repairs manually can be obtained from git-worktree.txt and
gitrepository-layout.txt, we can assist users more directly by teaching
git-worktree how to repair its administrative files itself (at least to
some extent). Therefore, add a "git worktree repair" command which
attempts to correct common problems which may arise due to factors
beyond Git's control.
At this stage, the "repair" command is a mere skeleton; subsequent
commits will flesh out the functionality.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Lin Sun
Matheus Tavares
Jonathan Tan
Eric Sunshine
René Scharfe
Orgad Shaneh
Taylor Blau
Hugo Locurcio
Shourya Shukla