| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
|
|
Code clean-up to hide vreportf() from public API.
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
|
|
Code refactoring in the reflog part of refs API.
* ab/reflog-prep:
reflog + refs-backend: move "verbose" out of the backend
refs files-backend: assume cb->newlog if !EXPIRE_REFLOGS_DRY_RUN
reflog: reduce scope of "struct rev_info"
reflog expire: don't use lookup_commit_reference_gently()
reflog expire: refactor & use "tip_commit" only for UE_NORMAL
reflog expire: use "switch" over enum values
reflog: change one->many worktree->refnames to use a string_list
reflog expire: narrow scope of "cb" in cmd_reflog_expire()
reflog delete: narrow scope of "cmd" passed to count_reflog_ent()
|
|
"git stash" by default triggers its "push" action, but its
implementation also made "git stash -h" to show short help only for
"git stash push", which has been corrected.
* ab/do-not-limit-stash-help-to-push:
stash: don't show "git stash push" usage on bad "git stash" usage
|
|
"git fetch" and "git pull" are now declared sparse-index clean.
Also "git ls-files" learns the "--sparse" option to help debugging.
* ds/fetch-pull-with-sparse-index:
test-read-cache: remove --table, --expand options
t1091/t3705: remove 'test-tool read-cache --table'
t1092: replace 'read-cache --table' with 'ls-files --sparse'
ls-files: add --sparse option
fetch/pull: use the sparse index
|
|
Use of certain "git rev-list" options with "git fast-export"
created nonsense results (the worst two of which being "--reverse"
and "--invert-grep --grep=<foo>"). The use of "--first-parent" is
made to behave a bit more sensible than before.
* ws/fast-export-with-revision-options:
fast-export: fix surprising behavior with --first-parent
|
|
Certain sparse-checkout patterns that are valid in non-cone mode
led to segfault in cone mode, which has been corrected.
* ds/sparse-checkout-malformed-pattern-fix:
sparse-checkout: refuse to add to bad patterns
sparse-checkout: fix OOM error with mixed patterns
sparse-checkout: fix segfault on malformed patterns
|
|
Two fixes around "git repack".
* ds/repack-fixlets:
repack: make '--quiet' disable progress
repack: respect kept objects with '--write-midx -b'
|
|
The default merge message prepared by "git merge" records the name
of the current branch; the name can be overridden with a new option
to allow users to pretend a merge is made on a different branch.
* jc/merge-detached-head-name:
merge: allow to pretend a merge is made into a different branch
|
|
"git am" learns "--empty=(stop|drop|keep)" option to tweak what is
done to a piece of e-mail without a patch in it.
* xw/am-empty:
am: support --allow-empty to record specific empty patches
am: support --empty=<option> to handle empty patches
doc: git-format-patch: describe the option --always
|
|
Many git commands that deal with working tree files try to remove a
directory that becomes empty (i.e. "git switch" from a branch that
has the directory to another branch that does not would attempt
remove all files in the directory and the directory itself). This
drops users into an unfamiliar situation if the command was run in
a subdirectory that becomes subject to removal due to the command.
The commands have been taught to keep an empty directory if it is
the directory they were started in to avoid surprising users.
* en/keep-cwd:
t2501: simplify the tests since we can now assume desired behavior
dir: new flag to remove_dir_recurse() to spare the original_cwd
dir: avoid incidentally removing the original_cwd in remove_path()
stash: do not attempt to remove startup_info->original_cwd
rebase: do not attempt to remove startup_info->original_cwd
clean: do not attempt to remove startup_info->original_cwd
symlinks: do not include startup_info->original_cwd in dir removal
unpack-trees: add special cwd handling
unpack-trees: refuse to remove startup_info->original_cwd
setup: introduce startup_info->original_cwd
t2501: add various tests for removing the current working directory
|
|
The "init" and "set" subcommands in "git sparse-checkout" have been
unified for a better user experience and performance.
* en/sparse-checkout-set:
sparse-checkout: remove stray trailing space
clone: avoid using deprecated `sparse-checkout init`
Documentation: clarify/correct a few sparsity related statements
git-sparse-checkout.txt: update to document init/set/reapply changes
sparse-checkout: enable reapply to take --[no-]{cone,sparse-index}
sparse-checkout: enable `set` to initialize sparse-checkout mode
sparse-checkout: split out code for tweaking settings config
sparse-checkout: disallow --no-stdin as an argument to set
sparse-checkout: add sanity-checks on initial sparsity state
sparse-checkout: break apart functions for sparse_checkout_(set|add)
sparse-checkout: pass use_stdin as a parameter instead of as a global
|
|
New interface into the tmp-objdir API to help in-core use of the
quarantine feature.
* ns/tmp-objdir:
tmp-objdir: disable ref updates when replacing the primary odb
tmp-objdir: new API for creating temporary writable databases
|
|
"git format-patch" uses a single rev_info instance and then exits.
Mark the structure with UNLEAK() macro to squelch leak sanitizer.
* jc/unleak-log:
format-patch: mark rev_info with UNLEAK
|
|
When in cone mode sparse-checkout, it is unclear how 'git
sparse-checkout add <dir1> ...' should behave if the existing
sparse-checkout file does not match the cone mode patterns. Change the
behavior to fail with an error message about the existing patterns.
Also, all cone mode patterns start with a '/' character, so add that
restriction. This is necessary for our example test 'cone mode: warn on
bad pattern', but also requires modifying the example sparse-checkout
file we use to test the warnings related to recognizing cone mode
patterns.
This error checking would cause a failure further down the test script
because of a test that adds non-cone mode patterns without cleaning them
up. Perform that cleanup as part of the test now.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test to t1091-sparse-checkout-builtin.sh that would result in an
infinite loop and out-of-memory error before this change. The issue
relies on having non-cone-mode patterns while trying to modify the
patterns in cone-mode.
The fix is simple, allowing us to break from the loop when the input
path does not contain a slash, as the "dir" pattern we added does not.
This is only a fix to the critical out-of-memory error. A better
response to such a strange state will follow in a later change.
Reported-by: Calbabreaker <calbabreaker@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch --set-upstream" did not check if there is a current
branch, leading to a segfault when it is run on a detached HEAD,
which has been corrected.
* ab/fetch-set-upstream-while-detached:
pull, fetch: fix segfault in --set-upstream option
|
|
Move the handling of the "verbose" flag entirely out of
"refs/files-backend.c" and into "builtin/reflog.c". This allows the
backend to stop knowing about the EXPIRE_REFLOGS_VERBOSE flag.
The expire_reflog_ent() function shouldn't need to deal with the
implementation detail of whether or not we're emitting verbose output,
by doing this the --verbose output becomes backend-agnostic, so
reftable will get the same output.
I think the output is rather bad currently, and should e.g. be
implemented with some better future mode of progress.[ch], but that's
a topic for another improvement.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "cmd.stalefix" handling added in 1389d9ddaa6 (reflog expire
--fix-stale, 2007-01-06) to use a locally scoped "struct
rev_info". This code relies on mark_reachable_objects() twiddling
flags in the walked objects.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the initial implementation of "git reflog" in 4264dc15e19 (git
reflog expire, 2006-12-19) we had this
lookup_commit_reference_gently().
I don't think we've ever found tags that we need to recursively
dereference in reflogs, so this should at least be changed to a
"lookup commit" as I'm doing here, although I can't think of a way
where it mattered in practice.
I also think we'd probably like to just die here if we have a NULL
object, but as this code needs to handle potentially broken
repositories let's just show an "error" but continue, the non-quiet
lookup_commit() will do for us. None of our tests cover the case where
"commit" is NULL after this lookup.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an intermediate variable for "tip_commit" in
reflog_expiry_prepare(), and only add it to the struct if we're
handling the UE_NORMAL case.
The code behaves the same way as before, but this makes the control
flow clearer, and the shorter name allows us to fold a 4-line i/else
into a one-line ternary instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code added in 03cb91b18cc (reflog --expire-unreachable: special
case entries in "HEAD" reflog, 2010-04-09) to use a "switch" statement
with an exhaustive list of "case" statements instead of doing numeric
comparisons against the enum labels.
Now we won't assume that "x != UE_ALWAYS" means "(x == UE_HEAD || x ||
UE_NORMAL)". That assumption is true now, but we'd introduce subtle
bugs here if that were to change, now the compiler will notice and
error out on such errors.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the FLEX_ARRAY pattern added in bda3a31cc79 (reflog-expire:
Avoid creating new files in a directory inside readdir(3) loop,
2008-01-25) the string-list API instead.
This does not change any behavior, allows us to delete much of this
code as it's replaced by things we get from the string-list API for
free, as a result we need just one struct to keep track of this data,
instead of two.
The "DUP" -> "string_list_append_nodup(..., strbuf_detach(...))"
pattern here is the same as that used in a recent memory leak fix in
b202e51b154 (grep: fix a "path_list" memory leak, 2021-10-22).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with the preceding change for "reflog delete", change the "cb_data"
we pass to callbacks to be &cb.cmd itself, instead of passing &cb and
having the callback lookup cb->cmd.
This makes it clear that the "cb" itself is the same memzero'd
structure on each iteration of the for-loops that use &cb, except for
the "cmd" member.
The "struct expire_reflog_policy_cb" we pass to reflog_expire() will
have the members that aren't "cmd" modified by the callbacks, but
before we invoke them everything except "cmd" is zero'd out.
This included the "tip_commit", "mark_list" and "tips". It might have
looked as though we were re-using those between iterations, but the
first thing we did in reflog_expiry_prepare() was to either NULL them,
or clobber them with another value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "cb_data" we pass to the count_reflog_ent() to be the
&cb.cmd itself, instead of passing &cb and having the callback lookup
cb->cmd.
This makes it clear that the "cb" itself is the same memzero'd
structure on each iteration of the for-loop that uses &cb, except for
the "cmd" member.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Existing callers to 'git ls-files' are expecting file names, not
directories. It is best to expand a sparse index to show all of the
contained files in this case.
However, expert users may want to inspect the contents of the index
itself including which directories are sparse. Add a --sparse option to
allow users to request this information.
During testing, I noticed that options such as --modified did not affect
the output when the files in question were outside the sparse-checkout
definition. Tests are added to document this preexisting behavior and
how it remains unchanged with the sparse index and the --sparse option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git fetch' and 'git pull' commands parse the index in order to
determine if submodules exist. Without command_requires_full_index=0,
this will expand a sparse index, causing slow performance even when
there is no new data to fetch.
The .gitmodules file will never be inside a sparse directory entry, and
even if it was, the index_name_pos() method would expand the sparse
index if needed as we search for the path by name. These commands do not
iterate over the index, which is the typical thing we are careful about
when integrating with the sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach diff and blame to work well with sparse index.
* ld/sparse-diff-blame:
blame: enable and test the sparse index
diff: enable and test the sparse index
diff: replace --staged with --cached in t1092 tests
repo-settings: prepare_repo_settings only in git repos
test-read-cache: set up repo after git directory
commit-graph: return if there is no git directory
git: ensure correct git directory setup with -h
|
|
"git name-rev" has been tweaked to give output that is shorter and
easier to understand.
* en/name-rev-shorter-output:
name-rev: prefer shorter names over following merges
|
|
"git fetch" without the "--update-head-ok" option ought to protect
a checked out branch from getting updated, to prevent the working
tree that checks it out to go out of sync. The code was written
before the use of "git worktree" got widespread, and only checked
the branch that was checked out in the current worktree, which has
been updated.
(originally called ak/fetch-not-overwrite-any-current-branch)
* ak/protect-any-current-branch:
branch: protect branches checked out in all worktrees
receive-pack: protect current branch for bare repository worktree
receive-pack: clean dead code from update_worktree()
fetch: protect branches checked out in all worktrees
worktree: simplify find_shared_symref() memory ownership model
branch: lowercase error messages
receive-pack: lowercase error messages
fetch: lowercase error messages
|
|
Extend the signing of objects with SSH keys and learn to pay
attention to the key validity time range when verifying.
* fs/ssh-signing-key-lifetime:
ssh signing: verify ssh-keygen in test prereq
ssh signing: make fmt-merge-msg consider key lifetime
ssh signing: make verify-tag consider key lifetime
ssh signing: make git log verify key lifetime
ssh signing: make verify-commit consider key lifetime
ssh signing: add key lifetime test prereqs
ssh signing: use sigc struct to pass payload
t/fmt-merge-msg: make gpgssh tests more specific
t/fmt-merge-msg: do not redirect stderr
|
|
When "git log" implicitly enabled the "decoration" processing
without being explicitly asked with "--decorate" option, it failed
to read and honor the settings given by the "--decorate-refs"
option.
* jk/log-decorate-opts-with-implicit-decorate:
log: load decorations with --simplify-by-decoration
log: handle --decorate-refs with userformat "%d"
|
|
The revision traversal machinery typically processes and returns all
children before any parent. fast-export needs to operate in the
reverse fashion, handling parents before any of their children in
order to build up the history starting from the root commit(s). This
would be a clear case where we could just use the revision traversal
machinery's "reverse" option to achieve this desired affect.
However, this wasn't what the code did. It added its own array for
queuing. The obvious hand-rolled solution would be to just push all
the commits into the array and then traverse afterwards, but it didn't
quite do that either. It instead attempted to process anything it
could as soon as it could, and once it could, check whether it could
process anything that had been queued. As far as I can tell, this was
an effort to save a little memory in the case of multiple root commits
since it could process some commits before queueing all of them. This
involved some helper functions named has_unshown_parent() and
handle_tail(). For typical invocations of fast-export, this
alternative essentially amounted to a hand-rolled method of reversing
the commits -- it was a bunch of work to duplicate the revision
traversal machinery's "reverse" option.
This hand-rolled reversing mechanism is actually somewhat difficult to
reason about. It takes some time to figure out how it ensures in
normal cases that it will actually process all traversed commits
(rather than just dropping some and not printing anything for them).
And it turns out there are some cases where the code does drop commits
without handling them, and not even printing an error or warning for
the user. Due to the has_unshown_parent() checks, some commits could
be left in the array at the end of the "while...get_revision()" loop
which would be unprocessed. This could be triggered for example with
git fast-export main -- --first-parent
or non-sensical traversal rules such as
git fast-export main -- --grep=Merge --invert-grep
While most traversals that don't include all parents should likely
trigger errors in fast-export (or at least require being used in
combination with --reference-excluded-parents), the --first-parent
traversal is at least reasonable and it'd be nice if it didn't just drop
commits. It'd also be nice for future readers of the code to have a
simpler "reverse traversal" mechanism. Use the "reverse" option of the
revision traversal machinery to achieve both.
Even for the non-sensical traversal flags like the --grep one above,
this would be an improvement. For example, in that case, the code
previously would have silently truncated history to only those commits
that do not have an ancestor containing "Merge" in their commit message.
After this code change, that case would include all commits without
"Merge" in their commit message -- but any commit that previously had a
"Merge"-mentioning parent would lose that parent
(likely resulting in many new root commits). While the new behavior is
still odd, it is at least understandable given that
--reference-excluded-parents is not the default.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: William Sprent <williams@unity3d.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a series of patches for a topic-B depends on having topic-A,
the workflow to prepare the topic-B branch would look like this:
$ git checkout -b topic-B main
$ git merge --no-ff --no-edit topic-A
$ git am <mbox-for-topic-B
When topic-A gets updated, recreating the first merge and rebasing
the rest of the topic-B, all on detached HEAD, is a useful
technique. After updating topic-A with its new round of patches:
$ git checkout topic-B
$ prev=$(git rev-parse 'HEAD^{/^Merge branch .topic-A. into}')
$ git checkout --detach $prev^1
$ git merge --no-ff --no-edit topic-A
$ git rebase --onto HEAD $prev @{-1}^0
$ git checkout -B @{-1}
This will
(0) check out the current topic-B.
(1) find the previous merge of topic-A into topic-B.
(2) detach the HEAD to the parent of the previous merge.
(3) merge the updated topic-A to it.
(4) reapply the patches to rebuild the rest of topic-B.
(5) update topic-B with the result.
without contaminating the reflog of topic-B too much. topic-B@{1}
is the "logically previous" state before topic-A got updated, for
example. At (4), comparison (e.g. range-diff) between HEAD and
@{-1} is a meaningful way to sanity check the result, and the same
can be done at (5) by comparing topic-B and topic-B@{1}.
But there is one glitch. The merge into the detached HEAD done in
the step (3) above gives us "Merge branch 'topic-A' into HEAD", and
does not say "into topic-B".
Teach the "--into-name=<branch>" option to "git merge" and its
underlying "git fmt-merge-message", to pretend as if we were merging
into <branch>, no matter what branch we are actually merging into,
when they prepare the merge message. The pretend name honors the
usual "into <target>" suppression mechanism, which can be seen in
the tests added here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While testing some ideas in 'git repack', I ran it with '--quiet' and
discovered that some progress output was still shown. Specifically, the
output for writing the multi-pack-index showed the progress.
The 'show_progress' variable in cmd_repack() is initialized with
isatty(2) and is not modified at all by the '--quiet' flag. The
'--quiet' flag modifies the po_args.quiet option which is translated
into a '--quiet' flag for the 'git pack-objects' child process. However,
'show_progress' is used to directly send progress information to the
multi-pack-index writing logic which does not use a child process.
The fix here is to modify 'show_progress' to be false if po_opts.quiet
is true, and isatty(2) otherwise. This new expectation simplifies a
later condition that checks both.
Update the documentation to make it clear that '-q' will disable all
progress in addition to ensuring the 'git pack-objects' child process
will receive the flag.
Use 'test_terminal' to check that this works to get around the isatty(2)
check.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Historically, we needed a single packfile in order to have reachability
bitmaps. This introduced logic that when 'git repack' had a '-b' option
that we should stop sending the '--honor-pack-keep' option to the 'git
pack-objects' child process, ensuring that we create a packfile
containing all reachable objects.
In the world of multi-pack-index bitmaps, we no longer need to repack
all objects into a single pack to have valid bitmaps. Thus, we should
continue sending the '--honor-pack-keep' flag to 'git pack-objects'.
The fix is very simple: only disable the flag when writing bitmaps but
also _not_ writing the multi-pack-index.
This opens the door to new repacking strategies that might want to keep
some historical set of objects in a stable pack-file while only
repacking more recent objects.
To test, create a new 'test_subcommand_inexact' helper that is more
flexible than 'test_subcommand'. This allows us to look for the
--honor-pack-keep flag without over-indexing on the exact set of
arguments.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comand uses a single instance of rev_info on stack, makes a
single revision traversal and exit. Mark the resources held by the
rev_info structure with UNLEAK().
We do not do this at lower level in revision.c or cmd_log_walk(), as
a new caller of the revision traversal API can make unbounded number
of rev_info during a single run, and UNLEAK() would not a be
suitable mechanism to deal with such a caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the usage message emitted by "git stash --invalid-option" to
emit usage information for "git stash" in general, and not just for
the "push" command. I.e. before:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--] [<pathspec>...]]
[...]
After:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash list [<options>]
or: git stash show [<options>] [<stash>]
or: git stash drop [-q|--quiet] [<stash>]
or: git stash ( pop | apply ) [--index] [-q|--quiet] [<stash>]
or: git stash branch <branchname> [<stash>]
or: git stash clear
or: git stash [push [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--pathspec-from-file=<file> [--pathspec-file-nul]]
[--] [<pathspec>...]]
or: git stash save [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [<message>]
[...]
That we emitted the usage for just "push" in the case of the
subcommand not being explicitly specified was an unintentional
side-effect of how it was implemented. When it was converted to C in
d553f538b8a (stash: convert push to builtin, 2019-02-25) the pattern
of having per-subcommand usage information was rightly continued. The
"git-stash.sh" shellscript did not have that, and always printed the
equivalent of "git_stash_usage".
But in doing so the case of push being implicit and explicit was
conflated. A variable was added to track this in 8c3713cede7 (stash:
eliminate crude option parsing, 2020-02-17), but it did not update the
usage output accordingly.
This still leaves e.g. "git stash push -h" emitting the
"git_stash_usage" output, instead of "git_stash_push_usage". That
should be fixed, but is a much deeper misbehavior in parse_options()
not being aware of subcommands at all. I.e. in how
PARSE_OPT_KEEP_UNKNOWN and PARSE_OPT_NO_INTERNAL_HELP combine in
commands such as "git stash".
Perhaps PARSE_OPT_KEEP_UNKNOWN should imply
PARSE_OPT_NO_INTERNAL_HELP, or better yet parse_options() should be
extended to fully handle these subcommand cases that we handle
manually in "git stash", "git commit-graph", "git multi-pack-index"
etc. All of those musings would be a much bigger change than this
isolated fix though, so let's leave that for some other time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option helps to record specific empty patches in the middle
of an am session, which does create empty commits only when:
1. the index has not changed
2. lacking a branch
When the index has changed, "--allow-empty" will create a non-empty
commit like passing "--continue" or "--resolved".
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since that the command 'git-format-patch' can include patches of
commits that emit no changes, the 'git-am' command should also
support an option, named as '--empty', to specify how to handle
those empty patches. In this commit, we have implemented three
valid options ('stop', 'drop' and 'keep').
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commits marked `sparse-checkout init` as deprecated; we
can just use `set` instead here and pass it no paths.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Folks may want to switch to or from cone mode, or to or from a
sparse-index without changing their sparsity paths. Allow them to do so
using the reapply command.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previously suggested workflow:
git sparse-checkout init ...
git sparse-checkout set ...
Suffered from three problems:
1) It would delete nearly all files in the first step, then
restore them in the second. That was poor performance and
forced unnecessary rebuilds.
2) The two-step process resulted in two progress bars, which
was suboptimal from a UI point of view for wrappers that
invoked both of these commands but only exposed a single
command to their end users.
3) With cone mode, the first step would delete nearly all
ignored files everywhere, because everything was considered
to be outside of the specified sparsity paths. (The user was
not allowed to specify any sparsity paths in the `init` step.)
Avoid these problems by teaching `set` to understand the extra
parameters that `init` takes and performing any necessary initialization
if not already in a sparse checkout.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`init` has some code for handling updates to either cone mode or
the sparse-index setting. We would like to be able to reuse this
elsewhere, namely in `set` and `reapply`. Split this function out,
and make it slightly more general so it can handle being called from
the new callers.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We intentionally added --stdin as an option to `sparse-checkout set`,
but didn't intend for --no-stdin to be permitted as well.
Reported-by: Victoria Dye <vdye@github.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most sparse-checkout subcommands (list, add, reapply) only make sense
when already in a sparse state. Add a quick check that will error out
early if this is not the case.
Also document with a comment why we do not exit early in `disable` even
when core.sparseCheckout starts as false.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
sparse_checkout_set() was reused by sparse_checkout_add() with the only
difference being a single parameter being passed to that function.
However, we would like sparse_checkout_set() to do the same work that
sparse_checkout_init() does if sparse checkouts are not already enabled.
To facilitate this transition, give each mode their own copy of the
function. This does not introduce any behavioral changes; that will
come in a subsequent patch.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
add_patterns_from_input() has relied on a global variable,
set_opts.use_stdin, which has been used by both the `set` and `add`
subcommands of sparse-checkout. Once we introduce an
add_opts.use_stdin, the hardcoding of set_opts.use_stdin will be
incorrect. Pass the value as function parameter instead to allow us to
make subsequent changes.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Derrick Stolee
Elijah Newren
Ævar Arnfjörð Bjarmason
William Sprent
Josh Steadmon
徐沛文 (Aleen)