| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Disable `command_requires_full_index` repo setting and add
`ensure_full_index` guards around code paths that cannot yet use sparse
directory index entries. `reset --soft` does not modify the index, so no
compatibility changes are needed for it to function without expanding the
index. For all other reset modes (`--mixed`, `--hard`, `--keep`, `--merge`),
the full index is expanded to prevent cache tree corruption and invalid
variable accesses.
Additionally, the `read_cache()` check verifying an uncorrupted index is
moved after argument parsing and preparing the repo settings. The index is
not used by the preceding argument handling, but `read_cache()` must be run
*after* enabling sparse index for the command (so that the index is not
expanded unnecessarily) and *before* using the index for reset (so that it
is verified as uncorrupted).
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change `update_index_from_diff` to set `skip-worktree` when applicable for
new index entries. When `git reset --mixed <tree-ish>` is run, entries in
the index with differences between the pre-reset HEAD and reset <tree-ish>
are identified and handled with `update_index_from_diff`. For each file, a
new cache entry in inserted into the index, created from the <tree-ish> side
of the reset (without changing the working tree). However, the newly-created
entry must have `skip-worktree` explicitly set in either of the following
scenarios:
1. the file is in the current index and has `skip-worktree` set
2. the file is not in the current index but is outside of a defined sparse
checkout definition
Not setting the `skip-worktree` bit leads to likely-undesirable results for
a user. It causes `skip-worktree` settings to disappear on the
"diff"-containing files (but *only* the diff-containing files), leading to
those files now showing modifications in `git status`. For example, when
running `git reset --mixed` in a sparse checkout, some file entries outside
of sparse checkout could show up as deleted, despite the user never deleting
anything (and not wanting them on-disk anyway).
Additionally, add a test to `t7102` to ensure `skip-worktree` is preserved
in a basic `git reset --mixed` scenario and update a failure-documenting
test from 19a0acc (t1092: test interesting sparse-checkout scenarios,
2021-01-23) with new expected behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename and invert value of `is_missing` to `is_in_reset_tree` to make the
variable more descriptive of what it represents.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression in "git commit-graph" command line parsing has been
corrected.
* tb/commit-graph-usage-fix:
builtin/multi-pack-index.c: disable top-level --[no-]progress
builtin/commit-graph.c: don't accept common --[no-]progress
|
|
"git rebase <upstream> <tag>" failed when aborted in the middle, as
it mistakenly tried to write the tag object instead of peeling it
to HEAD.
* pw/rebase-of-a-tag-fix:
rebase: dereference tags
rebase: use lookup_commit_reference_by_name()
rebase: use our standard error return value
t3407: rework rebase --quit tests
t3407: strengthen rebase --abort tests
t3407: use test_path_is_missing
t3407: rename a variable
t3407: use test_cmp_rev
t3407: use test_commit
t3407: run tests in $TEST_DIRECTORY
|
|
More code paths that use the hack to add submodule's object
database to the set of alternate object store have been cleaned up.
* jt/add-submodule-odb-clean-up:
revision: remove "submodule" from opt struct
repository: support unabsorbed in repo_submodule_init
submodule: remove unnecessary unabsorbed fallback
|
|
Message tweak.
* bs/difftool-msg-tweak:
difftool: fix word spacing in the usage strings
|
|
Doc update.
* ab/bundle-remove-verbose-option:
bundle: remove ignored & undocumented "--verbose" flag
|
|
Help text for "ls-files" options have been updated.
* bs/ls-files-opt-help-text-update:
ls-files: use imperative mood for -X and -z option description
|
|
"git difftool --dir-diff" mishandled symbolic links.
* da/difftool-dir-diff-symlink-fix:
difftool: fix symlink-file writing in dir-diff mode
|
|
Continued work on top of the hn/refs-errno-cleanup topic.
* ab/refs-files-cleanup:
refs/files: remove unused "errno != ENOTDIR" condition
refs/files: remove unused "errno == EISDIR" code
refs/files: remove unused "oid" in lock_ref_oid_basic()
refs API: remove OID argument to reflog_expire()
reflog expire: don't lock reflogs using previously seen OID
refs/files: add a comment about refs_reflog_exists() call
refs: make repo_dwim_log() accept a NULL oid
refs/debug: re-indent argument list for "prepare"
refs/files: remove unused "skip" in lock_raw_ref() too
refs/files: remove unused "extras/skip" in lock_ref_oid_basic()
refs: drop unused "flags" parameter to lock_ref_oid_basic()
refs/files: remove unused REF_DELETING in lock_ref_oid_basic()
refs/packet: add missing BUG() invocations to reflog callbacks
|
|
"git clone" from a repository whose HEAD is unborn into a bare
repository didn't follow the branch name the other side used, which
is corrected.
* jk/clone-unborn-head-in-bare:
clone: handle unborn branch in bare repos
|
|
"git stash", where the tentative change involves changing a
directory to a file (or vice versa), was confused, which has been
corrected.
* en/stash-df-fix:
stash: restore untracked files AFTER restoring tracked files
stash: avoid feeding directories to update-index
t3903: document a pair of directory/file bugs
|
|
In 73c3253d75e (bundle: framework for options before bundle file,
2019-11-10) the "git bundle" command was refactored to use
parse_options(). In that refactoring it started understanding the
"--verbose" flag before the subcommand, e.g.:
git bundle --verbose verify --quiet
However, nothing ever did anything with this "verbose" variable, and
the change wasn't documented. It appears to have been something that
escaped the lab, and wasn't flagged by reviewers at the time. Let's
just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* rs/use-xopen-in-index-pack:
index-pack: use xopen in init_thread
|
|
Code refactoring.
* jt/submodule-name-to-gitdir:
submodule: extract path to submodule gitdir func
|
|
The error in "git help no-such-git-command" is handled better.
* ma/help-w-check-for-requested-page:
help: make sure local html page exists before calling external processes
|
|
Adjust credential-cache helper to Windows.
* cb/unix-sockets-with-windows:
git-compat-util: include declaration for unix sockets in windows
credential-cache: check for windows specific errors
t0301: fixes for windows compatibility
|
|
An oddball OPTION_ARGUMENT feature has been removed from the
parse-options API.
* ab/retire-option-argument:
parse-options API: remove OPTION_ARGUMENT feature
difftool: use run_command() API in run_file_diff()
difftool: prepare "diff" cmdline in cmd_difftool()
difftool: prepare "struct child_process" in cmd_difftool()
|
|
Rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--bisect-next-check` subcommand
bisect--helper: reimplement `bisect_run` shell function in C
bisect--helper: reimplement `bisect_visualize()` shell function in C
run-command: make `exists_in_PATH()` non-static
t6030-bisect-porcelain: add test for bisect visualize
t6030-bisect-porcelain: add tests to control bisect run exit cases
|
|
Code clean-up.
* ab/gc-remove-unused-call:
gc: remove unused launchctl_get_uid() call
|
|
When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
|
|
"git update-ref --stdin" failed to flush its output as needed,
which potentially led the conversation to a deadlock.
* ps/update-ref-batch-flush:
t1400: avoid SIGPIPE race condition on fifo
update-ref: fix streaming of status updates
|
|
The difftool dir-diff mode handles symlinks by replacing them with their
readlink(2) values. This allows diff tools to see changes to symlinks
as if they were regular text diffs with the old and new path values.
This is analogous to what "git diff" displays when symlinks change.
The temporary diff directories that are created initially contain
symlinks because they get checked-out using a temporary index that
retains the original symlinks as checked-in to the repository.
A bug was introduced when difftool was rewritten in C that made
difftool write the readlink(2) contents into the pointed-to file rather
than the symlink itself. The write was going through the symlink and
writing to its target rather than writing to the symlink path itself.
Replace symlinks with raw text files by unlinking the symlink path
before writing the readlink(2) content into them.
When 18ec800512 (difftool: handle modified symlinks in dir-diff mode,
2017-03-15) added handling for modified symlinks this bug got recorded
in the test suite. The tests included the pointed-to symlink target
paths. These paths were being reported because difftool was erroneously
writing to them, but they should have never been reported nor written.
Correct the modified-symlinks test cases by removing the target files
from the expected output.
Add a test to ensure that symlinks are written with the readlink(2)
values and that the target files contain their original content.
Reported-by: Alan Blotz <work@blotz.org>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove spaces in `non - zero` and add a space between the diff
format/mode and option parentheses in difftool's usage strings.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usage description for -X and -z options use descriptive instead of
imperative mood. Edit it for consistency with other options.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A rebase started with 'git rebase <A> <B>' is conceptually to first
checkout <B> and run 'git rebase <A>' starting from that state. 'git
rebase --abort' in the middle of such a rebase should take us back to
the state we checked out <B>.
This used to work, even when <B> is a tag that points at a commit,
until Git 2.20.0 when the command was reimplemented in C. The command
now complains that the tag object itself cannot be checked out, which
may be technically correct but is not what the user asked to do.
Fix this old regression by using lookup_commit_reference_by_name()
when parsing <B>. The scripted version did not need to peel the tag
because the commands it passed the tag to (e.g 'git reset') peeled the
tag themselves.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
peel_committish() appears to have been copied from the scripted rebase
but it duplicates the functionality of
lookup_commit_reference_by_name() so lets use that instead.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git uses −1 to signal an error. The builtin rebase converts these to
+1 all over the place using !! (presumably because the in the scripted
version an error was signalled by +1). This is confusing and clutters
the code, we only need to convert the value when the function returns.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as the previous patch, let sub-commands which
support showing or hiding a progress meter handle parsing the
`--progress` or `--no-progress` option, but do not expose it as an
option to the top-level `multi-pack-index` builtin.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The run-command API has been updated so that the callers can easily
ask the file descriptors open for packfiles to be closed immediately
before spawning commands that may trigger auto-gc.
* js/run-command-close-packs:
Close object store closer to spawning child processes
run_auto_maintenance(): implicitly close the object store
run-command: offer to close the object store before running
run-command: prettify the `RUN_COMMAND_*` flags
pull: release packs before fetching
commit-graph: when closing the graph, also release the slab
|
|
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
|
|
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
|
|
Reimplementation of parts of "git submodule" in C continues.
* ar/submodule-run-update-procedure:
submodule--helper: run update procedures from C
|
|
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
|
|
More parts of "git submodule add" has been rewritten in C.
* ar/submodule-add-more:
submodule--helper: rename compute_submodule_clone_url()
submodule--helper: remove resolve-relative-url subcommand
submodule--helper: remove add-config subcommand
submodule--helper: remove add-clone subcommand
submodule--helper: convert the bulk of cmd_add() to C
dir: libify and export helper functions from clone.c
submodule--helper: remove repeated code in sync_submodule()
submodule--helper: refactor resolve_relative_url() helper
submodule--helper: add options for compute_submodule_clone_url()
|
|
Large part of "git submodule add" gets rewritten in C.
* ar/submodule-add-config:
submodule--helper: introduce add-config subcommand
|
|
Add progress display to "git bundle unbundle".
* ab/unbundle-progress:
bundle: show progress on "unbundle"
index-pack: add --progress-title option
bundle API: change "flags" to be "extra_index_pack_args"
bundle API: start writing API documentation
|
|
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
|
|
"git maintenance" scheduler learned to use systemd timers as a
possible backend.
* lh/systemd-timers:
maintenance: add support for systemd timers on Linux
maintenance: `git maintenance run` learned `--scheduler=<scheduler>`
cache.h: Introduce a generic "xdg_config_home_for(…)" function
|
|
The code to make "git grep" recurse into submodules has been
updated to migrate away from the "add submodule's object store as
an alternate object store" mechanism (which is suboptimal).
* jt/grep-wo-submodule-odb-as-alternate:
t7814: show lack of alternate ODB-adding
submodule-config: pass repo upon blob config read
grep: add repository to OID grep sources
grep: allocate subrepos on heap
grep: read submodule entry with explicit repo
grep: typesafe versions of grep_source_init
grep: use submodule-ODB-as-alternate lazy-addition
submodule: lazily add submodule ODBs as alternates
|
|
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
|
|
Optimize code that handles large number of refs in the "git fetch"
code path.
* ps/fetch-optim:
fetch: avoid second connectivity check if we already have all objects
fetch: merge fetching and consuming refs
fetch: refactor fetch refs to be more extendable
fetch-pack: optimize loading of refs via commit graph
connected: refactor iterator to return next object ID directly
fetch: avoid unpacking headers in object existence check
fetch: speed up lookup of want refs via commit-graph
|
|
When cloning a repository with an unborn HEAD, we'll set the local HEAD
to match it only if the local repository is non-bare. This is
inconsistent with all other combinations:
remote HEAD | local repo | local HEAD
-----------------------------------------------
points to commit | non-bare | same as remote
points to commit | bare | same as remote
unborn | non-bare | same as remote
unborn | bare | local default
So I don't think this is some clever or subtle behavior, but just a bug
in 4f37d45706 (clone: respect remote unborn HEAD, 2021-02-05). And it's
easy to see how we ended up there. Before that commit, the code to set
up the HEAD for an empty repo was guarded by "if (!option_bare)". That's
because the only thing it did was call install_branch_config(), and we
don't want to do so for a bare repository (unborn HEAD or not).
That commit put the handling of unborn HEADs into the same block, since
those also need to call install_branch_config(). But the unborn case has
an additional side effect of calling create_symref(), and we want that
to happen whether we are bare or not.
This patch just pulls all of the "figure out the default branch" code
out of the "!option_bare" block. Only the actual config installation is
kept there.
Note that this does mean we might allocate "ref" and not use it (if the
remote is empty but did not advertise an unborn HEAD). But that's not
really a big deal since this isn't a hot code path, and it keeps the
code simple. The alternative would be handling unborn_head_target
separately, but that gets confusing since its memory ownership is
tangled up with the "ref" variable.
There's just one new test, for the case we're fixing. The other ones in
the table are handled elsewhere (the unborn non-bare case just above,
and the actually-born cases in t5601, t5606, and t5609, as they do not
require v2's "unborn" protocol extension).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 84e4484f12 (commit-graph: use parse_options_concat(), 2021-08-23) we
unified common options of commit-graph's subcommands into a single
"common_opts" array.
But 84e4484f12 introduced a behavior change which is to accept the
"--[no-]progress" option before any sub-commands, e.g.,
git commit-graph --progress write ...
Prior to that commit, the above would error out with "unknown option".
There are two issues with this behavior change. First is that the
top-level --[no-]progress is not always respected. This is because
isatty(2) is performed in the sub-commands, which unconditionally
overwrites any --[no-]progress that was given at the top-level.
But the second issue is that the existing sub-commands of commit-graph
only happen to both have a sensible interpretation of what `--progress`
or `--no-progress` means. If we ever added a sub-command which didn't
have a notion of progress, we would be forced to ignore the top-level
`--[no-]progress` altogether.
Since we haven't released a version of Git that supports --[no-]progress
as a top-level option for `git commit-graph`, let's remove it.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* jc/prefix-filename-allocates:
hash-object: prefix_filename() returns allocated memory these days
|
|
Recent "diff -m" changes broke "gitk", which has been corrected.
* so/diff-index-regression-fix:
diff-index: restore -c/--cc options handling
|
|
We currently store each submodule gitdir in ".git/modules/<name>", but
this has problems with some submodule naming schemes, as described in a
comment in submodule_name_to_gitdir() in this patch.
Extract the determination of the location of a submodule's gitdir into
its own function submodule_name_to_gitdir(). For now, the problem
remains unsolved, but this puts us in a better position for finding a
solution.
This was motivated, at $DAYJOB, by a part of Android's repo hierarchy
[1]. In particular, there is a repo "build", and several repos of the
form "build/<name>".
This is based on earlier work by Brandon Williams [2].
[1] https://android.googlesource.com/platform/
[2] https://lore.kernel.org/git/20180808223323.79989-2-bmwill@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check that git.html exists, regardless of the page the user wants to open.
Checking whether the requested page exists instead gives us a smoother user
experience in two use cases:
1) The requested page doesn't exist
When calling a git command and there is an error, most users reasonably expect
git to produce an error message on the standard error stream, but in this case
we pass the filepath to git web--browse which passes it on to a browser (or a
helper program like xdg-open or start that should in turn open a browser)
without any error and many GUI based browsers or helpers won't output such a
message onto the standard error stream.
Especially the helper programs tend to show the corresponding error message in
a message box and wait for user input before exiting. This leaves users in
interactive console sessions without an error message in their console,
without a console prompt and without the help page they expected.
2) git.html is missing for some reason, but the user asked for some other page
We currently refuse to show any local html help page when we can't find
git.html. Even if the requested help page exists. If we check for the requested
page instead, we can show the user all available pages and only error out on
those that don't exist.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Connect and reset errors aren't what will be expected by POSIX but
are instead compatible with the ones used by WinSock.
To avoid any possibility of confusion with other systems, checks
for disconnection and availability had been abstracted into helper
functions that are platform specific.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Victoria Dye
Junio C Hamano
Ævar Arnfjörð Bjarmason
David Aguilar
Bagas Sanjaya
Phillip Wood
Taylor Blau
Jeff King
Jonathan Tan
Matthias Aßhauer
Carlo Marcelo Arenas Belón