| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit 0d1a1517835a10818f2d40d8780a268dbb5e20ce.
When trying to switch to a different branch, that happens to be
checked out in another working tree, the user shouldn't have to
give up the other safety measures (like protecting the local changes
that overlap the difference between the branches) while defeating
the "no two checkouts of the same branch" safety.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a safeguard, checking out a branch already checked out by a different
worktree is disallowed. This behavior can be overridden with
--ignore-other-worktrees, however, this option is neither obvious nor
particularly discoverable. As a common safeguard override, --force is
more likely to come to mind. Therefore, overload it to also suppress the
check for a branch already checked out elsewhere.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a convenience, when <branch> is omitted from "git worktree <path>
<branch>" and neither -b nor -B is used, automatically create a new
branch named after <path>, as if "-b $(basename <path>)" was specified.
Thus, "git worktree add ../hotfix" creates a new branch named "hotfix"
and associates it with new worktree "../hotfix".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a convenience, like "git branch" and "git checkout -b", make
"git worktree add -b <newbranch> <path> <branch>" default to HEAD when
<branch> is omitted.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subsequent patch will also need to compute the basename of the new
worktree, so factor out this logic into a new function.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to allow linked worktree creation via "git checkout --to" from
a bare repository, 3473ad0 (checkout: don't require a work tree when
checking out into a new one, 2014-11-30) dropped git-checkout's
unconditional NEED_WORK_TREE requirement and instead performed worktree
setup conditionally based upon presence or absence of the --to option.
Now that --to has been retired and git-checkout is no longer responsible
for linked worktree creation, the NEED_WORK_TREE requirement can be
re-instated.
This effectively reverts 3473ad0, except for the tests it added which
now check bare repository behavior of "git worktree add" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that "git worktree add" has achieved user-facing feature-parity with
"git checkout --to", retire the latter.
Move the actual linked worktree creation functionality,
prepare_linked_checkout() and its helpers, verbatim from checkout.c to
worktree.c.
This effectively reverts changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30) with the
exception of merge_working_tree() and switch_branches() which still
require specialized knowledge that a the checkout is occurring in a
newly-created linked worktree (signaled to them by the private
GIT_CHECKOUT_NEW_WORKTREE environment variable).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add -b/-B options to create a new
branch and check it out in the new worktree.
(For brevity, only -b is mentioned in the synopsis; -B is omitted.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add a --detach option to detach HEAD
in the new worktree.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, "git worktree add" refuses to create a new worktree when
the requested branch is already checked out elsewhere. Add a --force
option to override this safeguard.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The plan is to relocate "git checkout --to" functionality to "git
worktree add". As a first step, introduce a bare-bones git-worktree
"add" command along with documentation. At this stage, "git worktree
add" merely invokes "git checkout --to" behind the scenes, but an
upcoming patch will move the actual functionality
(checkout.c:prepare_linked_checkout() and its helpers) to worktree.c.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The plan is to relocate "git checkout --to" functionality to "git
worktree add", however, worktree.c won't have access to the 'struct
checkout_opts' passed to prepare_linked_worktree(), which it consults
for the pathname of the new worktree and the argv[] of the command it
should run to populate the new worktree. Facilitate relocation of
prepare_linked_worktree() by instead having it accept the pathname and
argv[] directly, thus eliminating the final references to 'struct
checkout_opts'.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
prepare_linked_checkout() respects git-checkout's --quiet flag, however,
the plan is to relocate "git checkout --to" functionality to "git
worktree add", and git-worktree does not (yet) have a --quiet flag.
Consequently, make prepare_linked_checkout() unconditionally verbose to
ease eventual code movement to worktree.c.
(A --quiet flag can be added to git-worktree later if there is demand
for it.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only references to 'new' were folded out by the last two patches.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The plan is to relocate "git checkout --to" functionality to "git
worktree add", however, this check expects a 'struct branch_info' which
git-worktree won't have at hand. It will, however, have access to its
own command-line from which it can pick up the branch name. Therefore,
as a preparatory step, rather than having prepare_linked_checkout()
perform this check, make it the caller's responsibility.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given "git checkout --to <path> HEAD~1", the new worktree's HEAD should
begin life at the current branch's HEAD~1, however, it actually ends up
at HEAD~2. This happens because:
1. git-checkout resolves HEAD~1
2. to satisfy is_git_directory(), prepare_linked_worktree() creates
a HEAD for the new worktree with the value of the resolved HEAD~1
3. git-checkout re-invokes itself with the same arguments within the
new worktree to populate the worktree
4. the sub git-checkout resolves HEAD~1 relative to its own HEAD,
which is the resolved HEAD~1 from the original invocation,
resulting unexpectedly and incorrectly in HEAD~2 (relative to the
original)
Fix this by unconditionally assigning the current worktree's HEAD as the
value of the new worktree's HEAD.
As a side-effect, this change also eliminates a dependence within
prepare_linked_checkout() upon 'struct branch_info'. The plan is to
eventually relocate "git checkout --to" functionality to "git worktree
add", and worktree.c won't have knowledge of 'struct branch_info', so
removal of this dependency is a step toward that goal.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
|
|
When --patch or pathspecs are passed to git checkout, the working tree
will not be switching branch, so there's no need to check if the branch
that we are running checkout on is already checked out.
Original-patch-by: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git prune --worktrees` was pruning worktrees which were non-existent OR
expired, while it rather should prune those which are orphaned AND
expired, as git-checkout documentation describes. Fix it.
Add test 'not prune proper checkouts', which uses valid but expired
worktree.
Modify test 'not prune recent checkouts' to remove the worktree before
pruning - link in worktrees still must survive. In older form it is
useless because would pass always when the other test passes.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Noticed-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Non-recursive checkout creates empty directpries in place of submodules.
If then I try to "checkout --to" submodules there, it refuses to do so,
because directory already exists.
Fix by allowing checking out to empty directory. Add test and modify the
existing one so that it uses non-empty directory.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For normal use cases, it does not make sense for 'checkout' to work on
a bare repository, without a worktree. But "checkout --to" is an
exception because it _creates_ a new worktree. Allow this option to
run on bare repositories.
People who check out from a bare repository should remember that
core.logallrefupdates is off by default and it should be turned back
on. `--to` cannot do this automatically behind the user's back because
some user may deliberately want no reflog.
For people interested in repository setup/discovery code,
is_bare_repository_cfg (aka "core.bare") is unchanged by this patch,
which means 'true' by default for bare repos. Fortunately when we get
the repo through a linked checkout, is_bare_repository_cfg is never
used. So all is still good.
[nd: commit message]
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In linked checkouts, borrowed parts like config is taken from
$GIT_COMMON_DIR. $GIT_DIR/config is never used. Report them as
garbage.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One branch obviously can't be checked out at two places (but detached
heads are ok). Give the user a choice in this case: --detach, -b
new-branch, switch branch in the other checkout first or simply 'cd'
and continue to work there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
(alias R=$GIT_COMMON_DIR/worktrees/<id>)
- linked checkouts are supposed to keep its location in $R/gitdir up
to date. The use case is auto fixup after a manual checkout move.
- linked checkouts are supposed to update mtime of $R/gitdir. If
$R/gitdir's mtime is older than a limit, and it points to nowhere,
worktrees/<id> is to be pruned.
- If $R/locked exists, worktrees/<id> is not supposed to be pruned. If
$R/locked exists and $R/gitdir's mtime is older than a really long
limit, warn about old unused repo.
- "git checkout --to" is supposed to make a hard link named $R/link
pointing to the .git file on supported file systems to help detect
the user manually deleting the checkout. If $R/link exists and its
link count is greated than 1, the repo is kept.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout --to" sets up a new working directory with a .git file
pointing to $GIT_DIR/worktrees/<id>. It then executes "git checkout"
again on the new worktree with the same arguments except "--to" is
taken out. The second checkout execution, which is not contaminated
with any info from the current repository, will actually check out and
everything that normal "git checkout" does.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes common problems in these code about error handling,
forgetting to close the file handle after fprintf() fails, or not
printing out the error string..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The repo setup procedure is updated to detect $GIT_DIR/commondir and
set $GIT_COMMON_DIR properly.
The core.worktree is ignored when $GIT_COMMON_DIR is set. This is
because the config file is shared in multi-checkout setup, but
checkout directories _are_ different. Making core.worktree effective
in all checkouts mean it's back to a single checkout.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Among pathnames in $GIT_DIR, e.g. "index" or "packed-refs", we want to
automatically and silently map some of them to the $GIT_DIR of the
repository we are borrowing from via $GIT_COMMON_DIR mechanism. When
we formulate the pathname for its lockfile, we want it to be in the
same location as its final destination. "index" is not shared and
needs to remain in the borrowing repository, while "packed-refs" is
shared and needs to go to the borrowed repository.
git_path() could be taught about the ".lock" suffix and map
"index.lock" and "packed-refs.lock" the same way their basenames are
mapped, but instead the caller can help by asking where the basename
(e.g. "index") is mapped to git_path() and then appending ".lock"
after the mapping is done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allow the user to relocate certain paths out of $GIT_DIR via
environment variables, e.g. GIT_OBJECT_DIRECTORY, GIT_INDEX_FILE and
GIT_GRAFT_FILE. Callers are not supposed to use git_path() or
git_pathdup() to get those paths. Instead they must use
get_object_directory(), get_index_file() and get_graft_file()
respectively. This is inconvenient and could be missed in review (for
example, there's git_path("objects/info/alternates") somewhere in
sha1_file.c).
This patch makes git_path() and git_pathdup() understand those
environment variables. So if you set GIT_OBJECT_DIRECTORY to /foo/bar,
git_path("objects/abc") should return /foo/bar/abc. The same is done
for the two remaining env variables.
"git rev-parse --git-path" is the wrapper for script use.
This patch kinda reverts a0279e1 (setup_git_env: use git_pathdup
instead of xmalloc + sprintf - 2014-06-19) because using git_pathdup
here would result in infinite recursion:
setup_git_env() -> git_pathdup("objects") -> .. -> adjust_git_path()
-> get_object_directory() -> oops, git_object_directory is NOT set
yet -> setup_git_env()
I wanted to make git_pathdup_literal() that skips adjust_git_path().
But that won't work because later on when $GIT_COMMON_DIR is
introduced, git_pathdup_literal("objects") needs adjust_git_path() to
replace $GIT_DIR with $GIT_COMMON_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous patch, git_snpath() is modified to allocate a new
strbuf buffer because vsnpath() needs that. But that makes it
awkward because git_snpath() receives a pre-allocated buffer from
outside and has to copy data back. Rename it to strbuf_git_path()
and make it receive strbuf directly.
Using git_path() in update_refs_for_switch() which used to call
git_snpath() is safe because that function and all of its callers do
not keep any pointer to the round-robin buffer pool allocated by
get_pathname().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Corner-case bugfixes for "git fetch" around reflog handling.
* jk/fetch-reflog-df-conflict:
ignore stale directories when checking reflog existence
fetch: load all default config at startup
|
|
When we start the git-fetch program, we call git_config to
load all config, but our callback only processes the
fetch.prune option; we do not chain to git_default_config at
all.
This means that we may not load some core configuration
which will have an effect. For instance, we do not load
core.logAllRefUpdates, which impacts whether or not we
create reflogs in a bare repository.
Note that I said "may" above. It gets even more exciting. If
we have to transfer actual objects as part of the fetch,
then we call fetch_pack as part of the same process. That
function loads its own config, which does chain to
git_default_config, impacting global variables which are
used by the rest of fetch. But if the fetch is a pure ref
update (e.g., a new ref which is a copy of an old one), we
skip fetch_pack entirely. So we get inconsistent results
depending on whether or not we have actual objects to
transfer or not!
Let's just load the core config at the start of fetch, so we
know we have it (we may also load it again as part of
fetch_pack, but that's OK; it's designed to be idempotent).
Our tests check both cases (with and without a pack). We
also check similar behavior for push for good measure, but
it already works as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/push-cert:
receive-pack: avoid minor leak in case start_async() fails
|
|
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
|
|
If the asynchronous start of copy_to_sideband() fails, then any
env_array entries added to struct child_process proc by
prepare_push_cert_sha1() are leaked. Call the latter function only
after start_async() succeeded so that the allocated entries are
cleaned up automatically by start_command() or finish_command().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/push-cert:
push: heed user.signingkey for signed pushes
|
|
Allow us build with NO_PTHREADS=NoThanks compilation option.
* eb/no-pthreads:
Handle atexit list internaly for unthreaded builds
pack-objects: set number of threads before checking and warning
index-pack: fix compilation with NO_PTHREADS
|
|
Add managed "env" array to child_process to clarify the lifetime
rules.
* rs/run-command-env-array:
use env_array member of struct child_process
run-command: add env_array, an optional argv_array for env
|
|
Splitting pack-objects output into multiple packs is incompatible
with the use of reachability bitmap.
* jk/pack-objects-no-bitmap-when-splitting:
pack-objects: turn off bitmaps when we split packs
|
|
push --signed promises to take user.signingkey as the signing key but
fails to read the config.
Make it do so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The API to update refs have been restructured to allow introducing
a true transactional updates later. We would even allow storing
refs in backends other than the traditional filesystem-based one.
* rs/ref-transaction: (25 commits)
ref_transaction_commit: bail out on failure to remove a ref
lockfile: remove unable_to_lock_error
refs.c: do not permit err == NULL
remote rm/prune: print a message when writing packed-refs fails
for-each-ref: skip and warn about broken ref names
refs.c: allow listing and deleting badly named refs
test: put tests for handling of bad ref names in one place
packed-ref cache: forbid dot-components in refnames
branch -d: simplify by using RESOLVE_REF_READING
branch -d: avoid repeated symref resolution
reflog test: test interaction with detached HEAD
refs.c: change resolve_ref_unsafe reading argument to be a flags field
refs.c: make write_ref_sha1 static
fetch.c: change s_update_ref to use a ref transaction
refs.c: ref_transaction_commit: distinguish name conflicts from other errors
refs.c: pass a list of names to skip to is_refname_available
refs.c: call lock_ref_sha1_basic directly from commit
refs.c: refuse to lock badly named refs in lock_ref_sha1_basic
rename_ref: don't ask read_ref_full where the ref came from
refs.c: pass the ref log message to _create/delete/update instead of _commit
...
|
|
A new filter to programatically edit the tail end of the commit log
messages.
* cc/interpret-trailers:
Documentation: add documentation for 'git interpret-trailers'
trailer: add tests for commands in config file
trailer: execute command from 'trailer.<name>.command'
trailer: add tests for "git interpret-trailers"
trailer: add interpret-trailers command
trailer: put all the processing together and print
trailer: parse trailers from file or stdin
trailer: process command line trailer arguments
trailer: read and process config information
trailer: process trailers from input message and arguments
trailer: add data structures and basic functions
|
Junio C Hamano
Eric Sunshine
Nguyễn Thái Ngọc Duy
Max Kirillov
Dennis Kaarsemaker
Jeff King
René Scharfe
Michael J Gruber