| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* vr/merge-base-doc:
Restructure documentation for git-merge-base.
Documentation: update to git-merge-base --octopus
|
|
* jc/fix-add-u-unmerged:
Fix "add -u" that sometimes fails to resolve unmerged paths
Conflicts:
builtin/add.c
|
|
* jc/maint-branch-mergeoptions:
merge: make branch.<name>.mergeoptions correctly override merge.<option>
Conflicts:
builtin/merge.c
|
|
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
|
|
* cn/format-patch-quiet:
format-patch: document --quiet option
format-patch: don't pass on the --quiet flag
|
|
The config machinery already makes section and variable names
lowercase when parsing them, so using strcasecmp for comparison just
feels wasteful. No noticeable change intended.
Noticed-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/blame-parsename:
t/annotate-tests: Use echo & cat instead of sed
blame: tolerate bogus e-mail addresses a bit better
|
|
* jc/pack-objects-bigfile:
Teach core.bigfilethreashold to pack-objects
|
|
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
|
|
Since 0beee4c (git-add--interactive: remove hunk coalescing, 2008-07-02),
"git add--interactive" behaves lazily and passes overlapping hunks to the
underlying "git apply" without coalescing. This was partially corrected
by 7a26e65 (its partial revert, 2009-05-16), but overlapping hunks are
still passed when the patch is edited.
Teach "git apply" the --allow-overlap option that disables a safety
feature that avoids misapplication of patches by not applying patches
to overlapping hunks, and pass this option form "add -p" codepath.
Do not even advertise the option, as this is merely a workaround, and the
correct fix is to make "add -p" correctly coalesce adjacent patch hunks.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -u" updates the index with the updated contents from the working
tree by internally running "diff-files" to grab the set of paths that are
different from the index. Then it updates the index entries for the paths
that are modified in the working tree, and deletes the index entries for
the paths that are deleted in the working tree.
It ignored the output from the diff-files that indicated that a path is
unmerged. For these paths, it instead relied on the fact that an unmerged
path is followed by the result of comparison between stage #2 (ours) and
the working tree, and used that to update or delete such a path when it is
used to record the resolution of a conflict.
As the result, when a path did not have stage #2 (e.g. "we deleted while
the other side added"), these unmerged stages were left behind, instead of
recording what the user resolved in the working tree.
Since we recently fixed "diff-files" to indicate if the corresponding path
exists on the working tree for an unmerged path, we do not have to rely on
the comparison with stage #2 anymore. We can instead tell the diff-files
not to compare with higher stages, and use the unmerged output to update
the index to reflect the state of the working tree.
The changes to the test vector in t2200 illustrates the nature of the bug
and the fix. The test expected stage #1 and #3 entries be left behind,
but it was codifying the buggy behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unlike plain merge-base, merge-base --octopus only requires at least one
commit argument; update the synopsis to reflect that.
Add a sentence to the discussion that when --octopus is used, we do expect
'2' (the common ansestor across all) as the result.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '-r' command-line option is a no-op provided only for backward
compatiblity since abd6970 (cherry-pick: make -r the default, 2006-10-05),
and somehow ended up surviving across reimplementation in C at 9509af6
(Make git-revert & git-cherry-pick a builtin, 2007-03-01) and another
rewrite of the command line parser at f810379 (Make builtin-revert.c use
parse_options, 2007-10-07). We should have stopped advertising the option
long time ago.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --quiet flag is not meant to be passed on to the diff, as the user
always wants the patches to be produced so catch it and pass it to
reopen_stdout which decides whether to print the filename or not.
Noticed by Paul Gortmaker
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-remote-mirror-safer:
remote: deprecate --mirror
remote: separate the concept of push and fetch mirrors
remote: disallow some nonsensical option combinations
|
|
The pack-objects command should take notice of the object file and
refrain from attempting to delta large ones, to be consistent with
the fast-import command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
|
|
* jc/index-update-if-able:
update $GIT_INDEX_FILE when there are racily clean entries
diff/status: refactor opportunistic index update
|
|
* lt/default-abbrev:
Rename core.abbrevlength back to core.abbrev
Make the default abbrev length configurable
|
|
* mm/maint-log-n-with-diff-filtering:
log: fix --max-count when used together with -S or -G
|
|
* lp/config-vername-check:
Disallow empty section and variable names
Sanity-check config variable names
|
|
* load_file() returns a void pointer but is using 0 for the return
value
* builtin/receive-pack.c forgot to include builtin.h
* packet_trace_prefix can be marked static
* ll_merge takes a pointer for its last argument, not an int
* crc32 expects a pointer as the second argument but Z_NULL is defined
to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
2006-11-18 for more info)
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/init-gitdir:
init, clone: support --separate-git-dir for .git file
git-init.txt: move description section up
Conflicts:
builtin/clone.c
|
|
* jc/merge-sans-branch:
merge: merge with the default upstream branch without argument
merge: match the help text with the documentation
Conflicts:
builtin/merge.c
|
|
* jr/grep-en-config:
grep: allow -E and -n to be turned on by default via configuration
|
|
* ab/i18n-st: (69 commits)
i18n: git-shortlog basic messages
i18n: git-revert split up "could not revert/apply" message
i18n: git-revert literal "me" messages
i18n: git-revert "Your local changes" message
i18n: git-revert basic messages
i18n: git-notes GIT_NOTES_REWRITE_MODE error message
i18n: git-notes basic commands
i18n: git-gc "Auto packing the repository" message
i18n: git-gc basic messages
i18n: git-describe basic messages
i18n: git-clean clean.requireForce messages
i18n: git-clean basic messages
i18n: git-bundle basic messages
i18n: git-archive basic messages
i18n: git-status "renamed: " message
i18n: git-status "Initial commit" message
i18n: git-status "Changes to be committed" message
i18n: git-status shortstatus messages
i18n: git-status "nothing to commit" messages
i18n: git-status basic messages
...
Conflicts:
builtin/branch.c
builtin/checkout.c
builtin/clone.c
builtin/commit.c
builtin/grep.c
builtin/merge.c
builtin/push.c
builtin/revert.c
t/t3507-cherry-pick-conflict.sh
t/t7607-merge-overwrite.sh
|
|
* jk/pull-into-empty:
pull: do not clobber untracked files on initial pull
merge: merge unborn index before setting ref
|
|
* jc/maint-apply-report-offset:
apply -v: show offset count when patch did not apply exactly
|
|
* jc/maint-apply-no-double-patch:
apply: do not patch lines that were already patched
|
|
* commit '0cb6ad3':
checkout: fix bug with ambiguous refs
|
|
Currently, "git reflog" overrides some command line options such as
"--format".
Fix this by using the new 2-phase version of cmd_log_init().
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_log_init() sets up some default rev options and then calls
setup_revisions(), so that a caller cannot set up own defaults: Either
they get overriden by cmd_log_init() (if set before) or they override
the command line (if set after). We even complain about this in a
comment to cmd_log_reflog().
Therefore, separate the two steps so that one can still call
cmd_log_init() or, alternatively, cmd_log_init_defaults() followed by
cmd_log_init_finish() (and set defaults in between).
No functional change so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The configuration created by plain --mirror is dangerous and
useless, and we now have --mirror=fetch and --mirror=push to
replace it. Let's warn the user.
One alternative to this is to try to guess which type the
user wants. In a non-bare repository, a fetch mirror doesn't
make much sense, since it would overwrite local commits. But
in a bare repository, you might use either type, or even
both (e.g., if you are acting as an intermediate drop-point
across two disconnected networks).
So rather than try for complex heuristics, let's keep it
simple. The user knows what they're trying to do, so let
them tell us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-remote currently has one option, "--mirror", which sets
up mirror configuration which can be used for either
fetching or pushing. It looks like this:
[remote "mirror"]
url = wherever
fetch = +refs/*:refs/*
mirror = true
However, a remote like this can be dangerous and confusing.
Specifically:
1. If you issue the wrong command, it can be devastating.
You are not likely to "push" when you meant to "fetch",
but "git remote update" will try to fetch it, even if
you intended the remote only for pushing. In either
case, the results can be quite destructive. An
unintended push will overwrite or delete remote refs,
and an unintended fetch can overwrite local branches.
2. The tracking setup code can produce confusing results.
The fetch refspec above means that "git checkout -b new
master" will consider refs/heads/master to come from
the remote "mirror", even if you only ever intend to
push to the mirror. It will set up the "new" branch to
track mirror's refs/heads/master.
3. The push code tries to opportunistically update
tracking branches. If you "git push mirror foo:bar",
it will see that we are updating mirror's
refs/heads/bar, which corresponds to our local
refs/heads/bar, and will update our local branch.
To solve this, we split the concept into "push mirrors" and
"fetch mirrors". Push mirrors set only remote.*.mirror,
solving (2) and (3), and making an accidental fetch write
only into FETCH_HEAD. Fetch mirrors set only the fetch
refspec, meaning an accidental push will not force-overwrite
or delete refs on the remote end.
The new syntax is "--mirror=<fetch|push>". For
compatibility, we keep "--mirror" as-is, setting up both
types simultaneously.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It doesn't make sense to use "-m" on a mirror, since "-m"
sets up the HEAD symref in the remotes namespace, but with
mirror, we are by definition not using a remotes namespace.
Similarly, it does not make much sense to specify refspecs
with --mirror. For a mirror you plan to push to, those
refspecs will be ignored. For a mirror you are fetching
from, there is no point in mirroring, since the refspec
specifies everything you want to grab.
There is one case where "--mirror -t <X>" would be useful.
Because <X> is used as-is in the refspec, and because we
append it to to refs/, you could mirror a subset of the
hierarchy by doing:
git remote add --mirror -t 'tags/*'
But using anything besides a single branch as an argument to
"-t" is not documented and only happens to work, so closing
it off is not a serious regression.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/fetch-progressive-stride:
Fix potential local deadlock during fetch-pack
|
|
'sp/maint-upload-pack-stop-early'
* sp/maint-fetch-pack-stop-early:
enable "no-done" extension only when fetching over smart-http
* sp/maint-upload-pack-stop-early:
enable "no-done" extension only when serving over smart-http
|
|
Last night I had to make these two emergency reverts, but now we have a
better understanding of which part of the topic was broken, let's get rid
of the revert to fix it correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch-pack/upload-pack protocol relies on the underlying transport
(local pipe or TCP socket) to have enough slack to allow one window worth
of data in flight without blocking the writer. Traditionally we always
relied on being able to have two windows of 32 "have"s in flight (roughly
3k bytes) to stream.
The recent "progressive-stride" change allows "fetch-pack" to send up to
1024 "have"s without reading any response from "upload-pack". The
outgoing pipe of "upload-pack" can be clogged with many ACK and NAK that
are unread, while "fetch-pack" is still stuffing its outgoing pipe with
more "have"s, leading to a deadlock.
Revert the change unless we are in stateless rpc (aka smart-http) mode, as
using a large window full of "have"s is still a good way to help reduce
the number of back-and-forth, and there is no buffering issue there (it is
strictly "ping-pong" without an overlap).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'no-done' protocol extension is used, the upload-pack (i.e. the
server side) process stops listening to the fetch-pack after issuing the
final NAK, and starts sending the generated pack data back, but there may
be more "have" send by the latter in flight that the fetch-pack is
expecting to be responded with ACK/NAK. This will typically result in a
deadlock (both will block on write that the other end never reads) or
SIGPIPE on the fetch-pack end (upload-pack will finish writing a small
pack and goes away).
Disable it unless fetch-pack is running under smart-http, where there is
no such streaming issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This reverts commit 761ecf0bc7b6cddf311f00877c59e6381cdbdeea.
|
|
* maint:
git tag documentation grammar fixes and readability updates
grep: Add the option '--line-number'
|
|
This is a synonym for the existing '-n' option, matching GNU grep.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
|
|
* js/remove-unused-variables:
Remove unused variables
|
|
* jc/index-update-if-able:
update $GIT_INDEX_FILE when there are racily clean entries
diff/status: refactor opportunistic index update
|
|
* jk/checkout-orphan-warning:
checkout: tweak detached-orphan warning format
checkout: clear commit marks after detached-orphan check
checkout: add basic tests for detached-orphan warning
|
Nguyen Thai Ngoc Duy
Junio C Hamano
Jonathan Nieder
Josh Stone
Vincent van Ravesteijn
Ramkumar Ramachandra
Carlos Martín Nieto
Stephen Boyd
Michael J Gruber
Jeff King
Joe Ratterman