| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow to lock a worktree immediately after it's created. This helps
prevent a race between "git worktree add; git worktree lock" and
"git worktree prune".
* nd/worktree-add-lock:
worktree add: add --lock option
|
|
While handy, "git_path()" is a dangerous function to use as a
callsite that uses it safely one day can be broken by changes
to other code that calls it. Reduction of its use continues.
* jk/war-on-git-path:
am: drop "dir" parameter from am_state_init
replace strbuf_addstr(git_path()) with git_path_buf()
replace xstrdup(git_path(...)) with git_pathdup(...)
use git_path_* helper functions
branch: add edit_description() helper
bisect: add git_path_bisect_terms helper
|
|
Writing directly into the strbuf avoids a useless copy of
the data, and dropping calls to git_path() makes it easier
to audit for dangerous calls.
Note that git_path() does an implicit strbuf_reset(), but in
each of these cases we were either already doing that reset,
or writing into a fresh strbuf anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As explained in the document. This option has an advantage over the
command sequence "git worktree add && git worktree lock": there will be
no gap that somebody can accidentally "prune" the new worktree (or soon,
explicitly "worktree remove" it).
"worktree add" does keep a lock on while it's preparing the worktree.
If --lock is specified, this lock remains after the worktree is created.
Suggested-by: David Taylor <David.Taylor@dell.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).
Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).
The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.
I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).
In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Incorrect usage help message for "git worktree prune" has been fixed.
* ps/worktree-prune-help-fix:
worktree: fix option descriptions for `prune`
|
|
The `verbose` and `expire` options of the `git worktree prune`
subcommand have wrong descriptions in that they pretend to relate to
objects. But as the git-worktree(1) correctly states, these options have
nothing to do with objects but only with worktrees. Fix the description
accordingly.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It makes it easier to write tests for. But it should also be good for
the user since locating a worktree by eye would be easier once they
notice this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another no-op patch, in preparation for get_worktrees() to do
optional things, like sorting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is required by git-worktree.txt, stating that the main worktree is
the first line (especially in --porcelain mode when we can't just change
behavior at will).
There's only one case when get_worktrees() may skip main worktree, when
parse_ref() fails. Update the code so that we keep first item as main
worktree and return something sensible in this case:
- In user-friendly mode, since we're not constraint by anything,
returning "(error)" should do the job (we already show "(detached
HEAD)" which is not machine-friendly). Actually errors should be
printed on stderr by parse_ref() (*)
- In plumbing mode, we do not show neither 'bare', 'detached' or
'branch ...', which is possible by the format description if I read
it right.
Careful readers may realize that when the local variable "head_ref" in
get_main_worktree() is emptied, add_head_info() will do nothing to
wt->head_sha1. But that's ok because head_sha1 is zero-ized in the
previous patch.
(*) Well, it does not. But it's supposed to be a stop gap implementation
until we can reuse refs code to parse "ref: " stuff in HEAD, from
resolve_refs_unsafe(). Now may be the time since refs refactoring is
mostly done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is no-op. But it helps reduce diff noise in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command accesses default_abbrev (defined in environment.c and is
updated via core.abbrev configuration), but never makes any call to
git_config(). The output from "worktree list" ignores the abbrev
setting for this reason.
Make a call to git_config() to read the default set of configuration
variables at the beginning of the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Initialize struct child_process variables already when they're defined.
That's shorter and saves a function call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location. "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.
* nd/worktree-lock:
worktree.c: find_worktree() search by path suffix
worktree: add "unlock" command
worktree: add "lock" command
worktree.c: add is_worktree_locked()
worktree.c: add is_main_worktree()
worktree.c: add find_worktree()
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We know that it should not contain any percent-signs, but
it's a good habit not to feed non-literals to printf
formatters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further preparatory clean-up for "worktree" feature continues.
* nd/worktree-cleanup-post-head-protection:
worktree: simplify prefixing paths
worktree: avoid 0{40}, too many zeroes, hard to read
worktree.c: use is_dot_or_dotdot()
git-worktree.txt: keep subcommand listing in alphabetical order
worktree.c: rewrite mark_current_worktree() to avoid strbuf
completion: support git-worktree
|
|
Since `git worktree add` uses `git checkout` when `[<branch>]` is used,
and `git checkout -` is already supported, it makes sense to allow the
same shortcut in `git worktree add`.
Signed-off-by: Jordan DE GEA <jordan.de-gea@grenoble-inp.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also makes slash conversion always happen on Windows (a side effect
of prefix_filename). Which is a good thing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is probably not the best order. But it makes it no-brainer to know
where to insert new commands. At some point we might want to reorder at
least the synopsis part again, grouping commonly use subcommands together.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
|
|
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
|
|
While at there, improve the error message to say _what_ failed to
remove.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function find_shared_symref() is used in a couple places:
1) in builtin/branch.c: it's used to detect if a branch is checked out
elsewhere and refuse to delete the branch.
2) in builtin/notes.c: it's used to detect if a note is being merged in
another worktree
3) in branch.c, the function die_if_checked_out() is actually used by
"git checkout" and "git worktree add" to see if a branch is already
checked out elsewhere and refuse the operation.
In cases 1 and 3, if a rebase is ongoing, "HEAD" will be in detached
mode, find_shared_symref() fails to detect it and declares "no branch is
checked out here", which is not really what we want.
This patch tightens the test. If the given symref is "HEAD", we try to
detect if rebase is ongoing. If so return the branch being rebased. This
makes checkout and branch delete operations safer because you can't
checkout a branch being rebased in another place, or delete it.
Special case for checkout. If the current branch is being rebased,
git-rebase.sh may use "git checkout" to abort and return back to the
original branch. The updated test in find_shared_symref() will prevent
that and "git rebase --abort" will fail as a result.
find_shared_symref() and die_if_checked_out() have to learn a new
option ignore_current_worktree to loosen the test a bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By adding this option which defaults to true, we can use the
corresponding --no-checkout to make some customizations before
the checkout, like sparse checkout, etc.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
|
|
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.
There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.
In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If --force is not given but -B is, we should not proceed if the given
branch is already checked out elsewhere. add_worktree() has this test,
but it kicks in too late when "git branch --force" is already
executed. As a result, even though we correctly refuse to create a new
worktree, we have already updated the branch and mess up the other
checkout.
Repeat the die_if_checked_out() test again for this specific case before
"git branch" runs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Current code does not update "symref" when -B is used. This string
contains the new HEAD. Because it's empty "git worktree add -B" fails at
symbolic-ref step.
Because branch creation is already done before calling add_worktree(),
-B is equivalent to -b from add_worktree() point of view. We do not need
the special case for -B.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
* es/worktree-add:
worktree: usage: denote <branch> as optional with 'add'
|
|
Although 1eb07d8 (worktree: add: auto-vivify new branch when
<branch> is omitted, 2015-07-06) updated the documentation when
<branch> became optional, it neglected to update the in-code
usage message. Fix this oversight.
Reported-by: ch3cooli@gmail.com
Signed-off-by: Sidhant Sharma <tigerkid001@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git worktree list' iterates through the worktree list, and outputs
details of the worktree including the path to the worktree, the currently
checked out revision and branch, and if the work tree is bare. There is
also porcelain format option available.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent reimplementation of "git am" changed the format of state
files kept in $GIT_DIR/rebase-apply/ without meaning to do so,
primarily because write_file() API was cumbersome to use and it was
easy to mistakenly make text files with incomplete lines. Update
write_file() interface to make it harder to misuse.
* jc/am-state-fix:
write_file(): drop caller-supplied LF from calls to create a one-liner file
write_file_v(): do not leave incomplete line at the end
write_file(): drop "fatal" parameter
builtin/am: make sure state files are text
builtin/am: introduce write_state_*() helper functions
|
|
All of the callsites covered by this change call write_file() or
write_file_gently() to create a one-liner file. Drop the caller
supplied LF and let these callees to append it as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All callers except three passed 1 for the "fatal" parameter to ask
this function to die upon error, but to a casual reader of the code,
it was not all obvious what that 1 meant. Instead, split the
function into two based on a common write_file_v() that takes the
flag, introduce write_file_gently() as a new way to attempt creating
a file without dying on error, and make three callers to call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "new-worktree-mode" hack in "checkout" that was added in
nd/multiple-work-trees topic has been removed by updating the
implementation of new "worktree add".
* es/worktree-add-cleanup: (25 commits)
Documentation/git-worktree: fix duplicated 'from'
Documentation/config: mention "now" and "never" for 'expire' settings
Documentation/git-worktree: fix broken 'linkgit' invocation
checkout: drop intimate knowledge of newly created worktree
worktree: populate via "git reset --hard" rather than "git checkout"
worktree: avoid resolving HEAD unnecessarily
worktree: make setup of new HEAD distinct from worktree population
worktree: detect branch-name/detached and error conditions locally
worktree: add_worktree: construct worktree-population command locally
worktree: elucidate environment variables intended for child processes
worktree: make branch creation distinct from worktree population
worktree: add: suppress auto-vivication with --detach and no <branch>
worktree: make --detach mutually exclusive with -b/-B
worktree: introduce options container
worktree: simplify new branch (-b/-B) option checking
worktree: improve worktree setup message
branch: publish die_if_checked_out()
checkout: teach check_linked_checkout() about symbolic link HEAD
checkout: check_linked_checkout: simplify symref parsing
checkout: check_linked_checkout: improve "already checked out" aesthetic
...
|
|
Now that git-worktree handles all functionality (--force, --detach,
-b/-B) previously delegated to git-checkout, actual population of the
new worktree can be accomplished more directly and lightweight with
"git reset --hard" in place of "git checkout".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that git-worktree sets HEAD explicitly to its final value via either
git-symbolic-ref or git-update-ref, rather than relying upon
git-checkout to do so, the "hack" for pacifying is_git_directory() with
a temporary HEAD, though still necessary, can be simplified.
Since the real HEAD is now populated with its proper final value, the
value of the temporary HEAD truly no longer matters, and any value which
looks like an object ID is good enough to satisfy is_git_directory().
Therefore, just set the temporary HEAD to a literal value rather than
going through the effort of resolving the current branch's HEAD.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-worktree currently conflates setting of HEAD in the new worktree and
initial worktree population into a single git-checkout invocation which
requires git-checkout to have special knowledge that it is operating on
a newly created worktree. The eventual goal is to rid git-checkout of
that overly-intimate knowledge.
Once these operations are separate, git-worktree will no longer be able
to delegate to git-branch the setting of the new worktree's HEAD to the
desired branch (or commit, if detached). Therefore, make git-worktree
itself responsible for setting up HEAD as either a symbolic reference,
if associated with a branch, or detached, if not.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-worktree currently conflates setting of HEAD in the new worktree
with initial worktree population via a single git-checkout invocation,
which requires git-checkout to have special knowledge that it is
operating in a newly created worktree. The eventual goal is to separate
these operations and rid git-checkout of that overly-intimate knowledge.
Once these operations are separate, git-worktree will no longer be able
to rely upon git-branch to determine the state of the worktree (branch
name or detached), or to check for error conditions, such as the
requested branch already checked out elsewhere, or an invalid reference.
Therefore, imbue git-worktree with the intelligence to determine a
branch name or detached state locally, and to perform error checking on
its own.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The caller of add_worktree() provides it with a command to invoke to
populate the new worktree. This was a useful abstraction during the
conversion of "git checkout --to" functionality to "git worktree add"
since git-checkout and git-worktree constructed the population command
differently. However, now that "git checkout --to" has been retired, and
add_worktree() has access to the options given to "worktree add", this
extra indirection is no longer useful and makes the code a bit
convoluted.
Moreover, the eventual goal is for git-worktree to make setting of HEAD
and worktree population distinct operations, whereas they are currently
conflated into a single git-checkout invocation. As such, add_worktree()
will eventually invoke other commands in addition to the worktree
population command, so it will be doing command construction itself
anyhow.
Therefore, relocate construction of the worktree population command from
add() to add_worktree().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Take advantage of 'struct child_process.env' to make it obvious that
environment variables set by add_worktree() are intended specifically
for sub-commands it invokes to operate in the new worktree.
We assign a local 'struct argv_array' to child_process.env, rather than
utilizing the child_process.env_array 'struct argv_array', because
future patches will make add_worktree() invoke additional sub-commands,
and it's simpler to populate the environment array just once, whereas
child_process.env_array gets cleared after each invocation, thus would
require re-population for each sub-command.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-worktree currently conflates branch creation, setting of HEAD in the
new worktree, and worktree population into a single sub-invocation of
git-checkout, which requires git-checkout to be specially aware that it
is operating in a newly-created worktree. The goal is to free
git-checkout of that special knowledge, and to do so, git-worktree will
eventually perform those operations separately. Thus, as a first step,
rather than piggybacking on git-checkout's -b/-B ability to create a new
branch at checkout time, make git-worktree responsible for branch
creation itself.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Johannes Schindelin
Jeff King
Nguyễn Thái Ngọc Duy
Patrick Steinhardt
René Scharfe
Jordan DE GEA
Ray Zhang
brian m. carlson
Sidhant Sharma
Michael Rappazzo
Eric Sunshine