| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When executing git-update-ref(1) with the `--stdin` flag, then the user
can queue updates and, since e48cf33b61 (update-ref: implement
interactive transaction handling, 2020-04-02), interactively drive the
transaction's state via a set of transactional verbs. This interactivity
is somewhat broken though: while the caller can use these verbs to drive
the transaction's state, the status messages which confirm that a verb
has been processed is not flushed. The caller may thus be left hanging
waiting for the acknowledgement.
Fix the bug by flushing stdout after writing the status update. Add a
test which catches this bug.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is currently possible to write multiple "start" commands into
git-update-ref(1) for a single session, but none of them except for the
first one actually have any effect.
Using such nested "start"s may eventually have a sensible effect. One
may imagine that it restarts the current transaction, effectively
emptying it and creating a new one. It may also allow for creation of
nested transactions. But currently, none of these are implemented.
Silently ignoring this misuse is making it hard to iterate in the future
if "start" is ever going to have meaningful semantics in such a context.
This commit thus makes sure to error out in case we see such use.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While git-update-ref has recently grown commands which allow interactive
control of transactions in e48cf33b61 (update-ref: implement interactive
transaction handling, 2020-04-02), it is not yet possible to create
multiple transactions in a single session. To do so, one currently still
needs to invoke the executable multiple times.
This commit addresses this shortcoming by allowing the "start" command
to create a new transaction if the current transaction has already been
either committed or aborted.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-update-ref(1) command can only handle queueing transactions
right now via its "--stdin" parameter, but there is no way for users to
handle the transaction itself in a more explicit way. E.g. in a
replicated scenario, one may imagine a coordinator that spawns
git-update-ref(1) for multiple repositories and only if all agree that
an update is possible will the coordinator send a commit. Such a
transactional session could look like
> start
< start: ok
> update refs/heads/master $OLD $NEW
> prepare
< prepare: ok
# All nodes have returned "ok"
> commit
< commit: ok
or
> start
< start: ok
> create refs/heads/master $OLD $NEW
> prepare
< fatal: cannot lock ref 'refs/heads/master': reference already exists
# On all other nodes:
> abort
< abort: ok
In order to allow for such transactional sessions, this commit
introduces four new commands for git-update-ref(1), which matches those
we have internally already with the exception of "start":
- start: start a new transaction
- prepare: prepare the transaction, that is try to lock all
references and verify their current value matches the
expected one
- commit: explicitly commit a session, that is update references to
match their new expected state
- abort: abort a session and roll back all changes
By design, git-update-ref(1) will commit as soon as standard input is
being closed. While fine in a non-transactional world, it is definitely
unexpected in a transactional world. Because of this, as soon as any of
the new transactional commands is used, the default will change to
aborting without an explicit "commit". To avoid a race between queueing
updates and the first "prepare" that starts a transaction, the "start"
command has been added to start an explicit transaction.
Add some tests to exercise this new functionality.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-update-ref(1) supports a `--stdin` mode that allows it to read
all reference updates from standard input. This is mainly used to allow
for atomic reference updates that are all or nothing, so that either all
references will get updated or none.
Currently, git-update-ref(1) reads all commands as a single block of up
to 1000 characters and only starts processing after stdin gets closed.
This is less flexible than one might wish for, as it doesn't really
allow for longer-lived transactions and doesn't allow any verification
without committing everything. E.g. one may imagine the following
exchange:
> start
< start: ok
> update refs/heads/master $NEWOID1 $OLDOID1
> update refs/heads/branch $NEWOID2 $OLDOID2
> prepare
< prepare: ok
> commit
< commit: ok
When reading all input as a whole block, the above interactive protocol
is obviously impossible to achieve. But by converting the command to
read commands linewise, we can make it more interactive than before.
Obviously, the linewise interface is only a first step in making
git-update-ref(1) work in a more transaction-oriented way. Missing is
most importantly support for transactional commands that manage the
current transaction.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the actual logic to update the transaction is handled in
`update_refs_stdin()`, the transaction itself is started and committed
in `cmd_update_ref()` itself. This makes it hard to handle transaction
abortion and commits as part of `update_refs_stdin()` itself, which is
required in order to introduce transaction handling features to `git
update-refs --stdin`.
Refactor the code to move all transaction handling into
`update_refs_stdin()` to prepare for transaction handling features.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently pass both an `strbuf` containing the current command line
as well as the `next` pointer pointing to the first argument to
commands. This is both confusing and makes code more intertwined.
Convert this to use a simple pointer as well as a pointer pointing to
the end of the input as a preparatory step to line-wise reading of
stdin.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `parse_refname` function accepts a `struct strbuf *input` argument
that isn't used at all. As we're about to convert commands to not use a
strbuf anymore but instead an end pointer, let's drop this argument now
to make the converting commit easier to review.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently manually wire up all commands known to `git-update-ref
--stdin`, making it harder than necessary to preprocess arguments after
the command is determined. To make this more extensible, let's refactor
the code to use an array of known commands instead. While this doesn't
add a lot of value now, it is a preparatory step to implement line-wise
reading of commands.
As we're going to introduce commands without trailing spaces, this
commit also moves whitespace parsing into the respective commands.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If passed both --no-deref and --stdin, update-ref would error out with a
general usage message that did not at all suggest these options were
incompatible. The manpage for update-ref did suggest through its
synopsis line that --no-deref and --stdin were incompatible, but it sadly
also incorrectly suggested that -d and --no-deref were incompatible. So
the help around the --no-deref option is buggy in a few ways.
The --stdin option did provide a different mechanism for avoiding
dereferencing symbolic-refs: adding a line reading
option no-deref
before every other directive in the input. (Technically, if the user
wants to do the extra work of first determining which refs they want to
update or delete are symbolic, then they only need to put the extra
"option no-deref" lines before the updates of those refs. But in some
cases, that's more work than just adding the "option no-deref" before
every other directive.)
It's easier to allow the user to just pass --no-deref along with --stdin
in order to tell update-ref that the user doesn't want any symbolic ref
to be dereferenced. It also makes the update-ref documentation simpler.
Implement that, and update the documentation to match.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref_transaction_*() family of functions expect a flags parameter
which is of type unsigned int. Make the update_flags variable, which
is passed as that parameter, be of the same type.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use skip_prefix() instead of starts_with() and strcmp() when parsing
'git update-ref's stdin to avoid a couple of magic numbers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even after working with this code for years, I still see this constant
name as "ref node ref". Rename it to make it's meaning clearer.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the ref transaction code to use struct object_id. Remove one
NULL pointer check which was previously inserted around a dereference;
since we now pass a pointer to struct object_id directly through, the
code we're calling handles this for us.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert delete_ref and refs_delete_ref to take a pointer to struct
object_id. Update the documentation accordingly, including referring to
null_oid in lowercase, as it is not a #define constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the uses of unsigned char * to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that delete_ref() accepts a reflog message, pass the user-provided
message to delete_ref() rather than silently dropping it.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of option "create-reflog" is "create_reflog", which
is neither a good description, nor a sensible string to translate.
Change it to a more meaningful message.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for allowing different "backends" to store the refs
in a way different from the traditional "one ref per file in $GIT_DIR
or in a $GIT_DIR/packed-refs file" filesystem storage, reduce
direct filesystem access to ref-like things like CHERRY_PICK_HEAD
from scripts and programs.
* dt/refs-backend-preamble:
git-stash: use update-ref --create-reflog instead of creating files
update-ref and tag: add --create-reflog arg
refs: add REF_FORCE_CREATE_REFLOG flag
git-reflog: add exists command
refs: new public ref function: safe_create_reflog
refs: break out check for reflog autocreation
refs.c: add err arguments to reflog functions
|
|
Allow the creation of a ref (e.g. stash) with a reflog already in
place. For most refs (e.g. those under refs/heads), this happens
automatically, but for others, we need this option.
Currently, git does this by pre-creating the reflog, but alternate ref
backends might store reflogs somewhere other than .git/logs. Code
that now directly manipulates .git/logs should instead use git
plumbing commands.
I also added --create-reflog to git tag, just for completeness.
In a moment, we will use this argument to make git stash work with
alternate ref backends.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ref_transaction_update() family of functions use the following
convention for their old_sha1 parameters:
* old_sha1 == NULL: Don't check the old value at all.
* is_null_sha1(old_sha1): Ensure that the reference didn't exist
before the transaction.
* otherwise: Ensure that the reference had the specified value before
the transaction.
delete_ref() had a different convention, namely treating
is_null_sha1(old_sha1) as "don't care". Change it to adhere to the
standard convention to reduce the scope for confusion.
Please note that it is now a bug to pass old_sha1=NULL_SHA1 to
delete_ref() (because it doesn't make sense to delete a reference that
you already know doesn't exist). This is consistent with the behavior
of ref_transaction_delete().
Most of the callers of delete_ref() never pass old_sha1=NULL_SHA1 to
delete_ref(), and are therefore unaffected by this change. The
two exceptions are:
* The call in cmd_update_ref(), which passed NULL_SHA1 if the old
value passed in on the command line was 0{40} or the empty string.
Change that caller to pass NULL in those cases.
Arguably, it should be an error to call "update-ref -d" with the old
value set to "does not exist", just as it is for the `--stdin`
command "delete". But since this usage was accepted until now,
continue to accept it.
* The call in delete_branches(), which could pass NULL_SHA1 if
deleting a broken or symbolic ref. Change it to pass NULL in these
cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Restructure the code to avoid clearing oldsha1 when oldval is unset.
It's value is not needed in that case, so this change makes it more
obvious that its initialization is consistent with its later use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If NULL is passed to ref_transaction_update()'s new_sha1 parameter,
then just verify old_sha1 (under lock) without trying to change the
new value of the reference.
Use this functionality to add a new function ref_transaction_verify(),
which checks the current value of the reference under lock but doesn't
change it.
Use ref_transaction_verify() in the implementation of "git update-ref
--stdin"'s "verify" command to avoid the awkward need to "update" the
reference to its existing value.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
ref_transaction_delete() will get the same treatment in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the following functions' "flags" arguments from "int" to
"unsigned int":
* ref_transaction_update()
* ref_transaction_create()
* ref_transaction_delete()
* update_ref()
* delete_ref()
* lock_ref_sha1_basic()
Also change the "flags" member in "struct ref_update" to unsigned.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If "git update-ref --stdin" was given a "verify" command with no
"<newvalue>" at all (not even zeros), the code was mistakenly setting
have_old=0 (and leaving old_sha1 uninitialized). But this is
incorrect: this command is supposed to verify that the reference
doesn't exist. So in this case we really need old_sha1 to be set to
null_sha1 and have_old to be set to 1.
Moreover, since have_old was being set to zero, *no* check of the old
value was being done, so the new value of the reference was being set
unconditionally to the value in new_sha1. new_sha1, in turn, was set
to null_sha1 in the expectation that that was the old value and it
shouldn't be changed. But because the precondition was not being
checked, the result was that the reference was being deleted
unconditionally.
So, if <oldvalue> is missing, set have_old unconditionally and set
old_sha1 to null_sha1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the ref transaction API so that we pass the reflog message to the
create/delete/update functions instead of to ref_transaction_commit.
This allows different reflog messages for each ref update in a multi-ref
transaction.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it more obvious at a glance where the output of functions
parsing the --stdin stream goes.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Making the strbuf local in each function that needs to print errors
saves the reader from having to think about action at a distance,
such as
* errors piling up and being concatenated with no newline between
them
* errors unhandled in one function, to be later handled in another
* concurrency issues, if this code starts using threads some day
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an err argument to _begin so that on non-fatal failures in future ref
backends we can report a nice error back to the caller.
While _begin can currently never fail for other reasons than OOM, in which
case we die() anyway, we may add other types of backends in the future.
For example, a hypothetical MySQL backend could fail in _begin with
"Can not connect to MySQL server. No route to host".
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change ref_transaction_delete() to do basic error checking and return
non-zero on error. Update all callers to check the return for
ref_transaction_delete(). There are currently no conditions in _delete that
will return error but there will be in the future. Add an err argument that
will be updated on failure.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Do basic error checking in ref_transaction_create() and make it return
non-zero on error. Update all callers to check the result of
ref_transaction_create(). There are currently no conditions in _create that
will return error but there will be in the future. Add an err argument that
will be updated on failure.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update ref_transaction_update() do some basic error checking and return
non-zero on error. Update all callers to check ref_transaction_update() for
error. There are currently no conditions in _update that will return error but
there will be in the future. Add an err argument that will be updated on
failure. In future patches we will start doing both locking and checking
for name conflicts in _update instead of _commit at which time this function
will start returning errors for these conditions.
Also check for BUGs during update and die(BUG:...) if we are calling
_update with have_old but the old_sha1 pointer is NULL.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
|
|
Since all callers now use QUIET_ON_ERR we no longer need to provide an onerr
argument any more. Remove the onerr argument from the ref_transaction_commit
signature.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
|
|
Call ref_transaction_commit with QUIET_ON_ERR and use the strbuf that is
returned to print a log message if/after the transaction fails.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
|
|
Add a strbuf argument to _commit so that we can pass an error string back to
the caller. So that we can do error logging from the caller instead of from
_commit.
Longer term plan is to first convert all callers to use onerr==QUIET_ON_ERR
and craft any log messages from the callers themselves and finally remove the
onerr argument completely.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
|
|
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
|
|
This change is mostly clerical: the parse_cmd_*() functions need to
use local variables rather than a struct ref_update to collect the
arguments needed for each update, and then call ref_transaction_*() to
queue the change rather than building up the list of changes at the
caller side.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make (most of) the error messages for invalid input have the same
format [1]:
$COMMAND [SP $REFNAME]: $MESSAGE
Update the tests accordingly.
[1] A few error messages are left with their old form, because
$COMMAND and $REFNAME aren't passed all the way down the call
stack. Maybe those sites should be changed some day, too.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Distinguish this error from the error that an argument is missing for
another reason. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the original version of this command, for the single case of the
"update" command's <newvalue>, the empty string was interpreted as
being equivalent to 40 "0"s. This shorthand is unnecessary (binary
input will usually be generated programmatically anyway), and it
complicates the parser and the documentation.
So gently deprecate this usage: remove its description from the
documentation and emit a warning if it is found. But for reasons of
backwards compatibility, continue to accept it.
Helped-by: Brad King <brad.king@kitware.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace three functions, update_store_new_sha1(),
update_store_old_sha1(), and parse_next_arg(), with a single function,
parse_next_sha1(). The new function takes care of a whole argument,
including checking whether it is there, converting it to an SHA-1, and
emitting errors on EOF or for invalid values. The return value
indicates whether the argument was present or absent, which requires
a bit of intelligence because absent values are represented
differently depending on whether "-z" was used.
The new interface means that the calling functions, parse_cmd_*(),
don't have to interpret the result differently based on the
line_termination mode that is in effect. It also means that
parse_cmd_create() can distinguish unambiguously between an empty new
value and a zeros new value, which fixes a failure in t1400.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of, for example,
fatal: update refs/heads/master missing [<oldvalue>] NUL
emit
fatal: update refs/heads/master missing <oldvalue>
Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old error messages emitted for invalid input sometimes said
"<oldvalue>"/"<newvalue>" and sometimes said "old value"/"new value".
Convert them all to the former. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Patrick Steinhardt
Jeff King
Elijah Newren
SZEDER Gábor
Michael Haggerty
brian m. carlson
Brandon Williams
Kyle Meyer
Ralf Thielow
Junio C Hamano
David Turner
Alex Henrie
Ronnie Sahlberg
Jonathan Nieder