| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A handful of obvious clean-ups around a topic that is already in
'master'.
* gc/branch-recurse-submodules-fix:
branch.c: simplify advice-and-die sequence
branch: rework comments for future developers
branch: remove negative exit code
branch --set-upstream-to: be consistent when advising
branch: give submodule updating advice before exit
branch: support more tracking modes when recursing
|
|
"git branch --recurse-submodules" does not propagate "--track=inherit"
or "--no-track" to submodules, which causes submodule branches to use
the wrong tracking mode [1]. To fix this, pass the correct options to
the "submodule--helper create-branch" child process and test for it.
While we are refactoring the same code, replace "--track" with the
synonymous, but more consistent-looking "--track=direct" option
(introduced at the same time as "--track=inherit", d3115660b4 (branch:
add flags and config to inherit tracking, 2021-12-20)).
[1] This bug is partially a timing issue: "branch --recurse-submodules"
was introduced around the same time as "--track=inherit", and even
though I rebased "branch --recurse-submodules" on top of that, I had
neglected to support the new tracking mode. Omitting "--no-track"
was just a plain old mistake, though.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rearrange functions so that submodule_update() no longer needs to be
forward declared.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch completes the conversion past the flag parsing of
`submodule update` by introducing a helper subcommand called
`submodule--helper update`. The behaviour of `submodule update` should
remain the same after this patch.
Prior to this patch, `submodule update` was implemented by piping the
output of `update-clone` (which clones all missing submodules, then
prints relevant information for all submodules) into
`run-update-procedure` (which reads the information and updates the
submodule tree).
With `submodule--helper update`, we iterate over the submodules and
update the submodule tree in the same process. This reuses most of
existing code structure, except that `update_submodule()` now updates
the submodule tree (instead of printing submodule information to be
consumed by another process).
Recursing on a submodule is done by calling a subprocess that launches
`submodule--helper update`, with a modified `--recursive-prefix` and
`--prefix` parameter.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A later commit will combine the "update-clone" and
"run-update-procedure" commands, so run_update_procedure() will be
removed. Prepare for this by moving as much logic as possible out of
run_update_procedure() and into update_submodule2().
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor 'struct update_data' to hold the parsed args needed by "git
submodule--helper update" and refactor "update-clone" and
"run-update-procedure" (the functions that will be combined to form
"update") to use these options.
For "run-update-procedure", 'struct update_data' already holds its args,
so only arg parsing code needs to be updated.
For "update-clone", move its args from 'struct submodule_update_clone'
into 'struct update_data', and replace them with a pointer to 'struct
update_data'. Its other members hold the submodule iteration state of
"update-clone", so those are unchanged.
Incidentally, since we reformat the designated initializers of the
affected structs, also reformat MODULE_CLONE_DATA_INIT for consistency.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a later commit, update_clone()'s options will be stored in a struct
update_data instead of submodule_update_clone. Preemptively rename the
options struct to "opt" to shrink that commit's diff.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use die_message() to print the "fatal: " prefix instead of doing it in
git-submodule.sh and remove a now-unnecessary exit code from "git
submodule--helper run-update-procedure".
Also, since die_message() adds the newline for us, replace an invocation
of die_with_status() with printf + exit invocations that do not add a
newline, but are otherwise identical to die_with_status().
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We switch to using the run-command API function that takes a
'struct child process', since we are using a lot of the options. This
will also make it simple to switch over to using 'capture_command()'
when we start handling the output of the command completely in C.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* gc/submodule-update-part1:
submodule--helper update-clone: check for --filter and --init
submodule update: add tests for --filter
submodule--helper: remove ensure-core-worktree
submodule--helper update-clone: learn --init
submodule--helper: allow setting superprefix for init_submodule()
submodule--helper: refactor get_submodule_displaypath()
submodule--helper run-update-procedure: learn --remote
submodule--helper: don't use bitfield indirection for parse_options()
submodule--helper: get remote names from any repository
submodule--helper run-update-procedure: remove --suboid
submodule--helper: reorganize code for sh to C conversion
submodule--helper: remove update-module-mode
submodule tests: test for init and update failure output
|
|
Plug random memory leaks.
* ab/plug-random-leaks:
repository.c: free the "path cache" in repo_clear()
range-diff: plug memory leak in read_patches()
range-diff: plug memory leak in common invocation
lockfile API users: simplify and don't leak "path"
commit-graph: stop fill_oids_from_packs() progress on error and free()
commit-graph: fix memory leak in misused string_list API
submodule--helper: fix trivial leak in module_add()
transport: stop needlessly copying bundle header references
bundle: call strvec_clear() on allocated strvec
remote-curl.c: free memory in cmd_main()
urlmatch.c: add and use a *_release() function
diff.c: free "buf" in diff_words_flush()
merge-base: free() allocated "struct commit **" list
index-pack: fix memory leaks
|
|
Usage-string normalization.
* ac/usage-string-fixups:
amend remaining usage strings according to style guide
|
|
"git submodule update --filter" also requires the "--init" option. Teach
update-clone to do this usage check in C and remove the check from
git-submodule.sh.
In addition, change update-clone's usage string so that it teaches users
about "git submodule update" instead of "git submodule--helper
update-clone" (the string is copied from git-submodule.sh). This should
be more helpful to users since they don't invoke update-clone directly.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the logic of "git submodule--helper ensure-core-worktree" into
run-update-procedure, and since this makes the ensure-core-worktree
command obsolete, remove it.
As a result, the order of two operations in git-submodule.sh is
reversed: 'set the value of core.worktree' now happens after the call to
"git submodule--helper relative-path". This is safe - "relative-path"
does not depend on the value of core.worktree.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "git submodule--helper update-clone" the --init flag and remove
the corresponding shell code.
When the `--init` flag is passed to the subcommand, we do not spawn a
new subprocess and call `submodule--helper init` on the submodule paths,
because the Git machinery is not able to pick up the configuration
changes introduced by that init call. So we instead run the
`init_submodule_cb()` callback over each submodule in the same process.
[1] https://lore.kernel.org/git/CAP8UFD0NCQ5w_3GtT_xHr35i7h8BuLX4UcHNY6VHPGREmDVObA@mail.gmail.com/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allow callers of the `init_submodule()` function to optionally
override the superprefix from the environment.
We need to enable this option because in our conversion of the update
command that will follow, the '--init' option will be handled through
this API. We will need to change the superprefix at that time to ensure
the display paths show correctly in the output messages.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We create a function called `do_get_submodule_displaypath()` that
generates the display path required by several submodule functions, and
takes a custom superprefix parameter, instead of reading it from the
environment.
We then redefine the existing `get_submodule_displaypath()` function
as a call to this new function, where the superprefix is obtained from
the environment.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach run-update-procedure to handle --remote instead of parsing
--remote in git-submodule.sh. As a result, "git submodule--helper
[print-default-remote|remote-branch]" have no more callers, so remove
them.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Do away with the indirection of local variables added in
c51f8f94e5b (submodule--helper: run update procedures from C,
2021-08-24).
These were only needed because in C you can't get a pointer to a
single bit, so we were using intermediate variables instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`get_default_remote()` retrieves the name of a remote by resolving the
refs from of the current repository's ref store.
Thus in order to use it for retrieving the remote name of a submodule,
we have to start a new subprocess which runs from the submodule
directory.
Let's instead introduce a function called `repo_get_default_remote()`
which takes any repository object and retrieves the remote accordingly.
`get_default_remote()` is then defined as a call to
`repo_get_default_remote()` with 'the_repository' passed to it.
Now that we have `repo_get_default_remote()`, we no longer have to start
a subprocess that called `submodule--helper get-default-remote` from
within the submodule directory.
So let's make a function called `get_default_remote_submodule()` which
takes a submodule path, and returns the default remote for that
submodule, all within the same process.
We can now use this function to save an unnecessary subprocess spawn in
`sync_submodule()`, and also in a subsequent patch, which will require
this functionality.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Helped-by: Glen Choo <chooglen@google.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach run-update-procedure to determine the oid of the submodule's HEAD
instead of doing it in git-submodule.sh.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a function, update_submodule2(), that will implement the
functionality of run-update-procedure and its surrounding shell code in
submodule.sh. This name is temporary; it will replace update_submodule()
when the sh to C conversion is complete.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is dead code - it has not been used since c51f8f94e5
(submodule--helper: run update procedures from C, 2021-08-24).
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a memory leak in code added in a6226fd772b (submodule--helper:
convert the bulk of cmd_add() to C, 2021-08-10). If "realrepo" isn't a
copy of the "repo" member we should free() it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
|
|
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
|
|
Usage strings for git (sub)command flags has a style guide that
suggests - first letter should not capitalized (unless required)
and it should skip full-stop at the end of line. But there are
some files where usage-strings do not follow the above mentioned
guide.
Amend the usage strings that don't follow the style convention/guide.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
|
|
When cloning a repo with a --filter and with --recurse-submodules
enabled, the partial clone filter only applies to the top-level repo.
This can lead to unexpected bandwidth and disk usage for projects which
include large submodules. For example, a user might wish to make a
partial clone of Gerrit and would run:
`git clone --recurse-submodules --filter=blob:5k https://gerrit.googlesource.com/gerrit`.
However, only the superproject would be a partial clone; all the
submodules would have all blobs downloaded regardless of their size.
With this change, the same filter can also be applied to submodules,
meaning the expected bandwidth and disk savings apply consistently.
To avoid changing default behavior, add a new clone flag,
`--also-filter-submodules`. When this is set along with `--filter` and
`--recurse-submodules`, the filter spec is passed along to git-submodule
and git-submodule--helper, such that submodule clones also have the
filter applied.
This applies the same filter to the superproject and all submodules.
Users who need to customize the filter per-submodule would need to clone
with `--no-recurse-submodules` and then manually initialize each
submodule with the proper filter.
Applying filters to submodules should be safe thanks to Jonathan Tan's
recent work [1, 2, 3] eliminating the use of alternates as a method of
accessing submodule objects, so any submodule object access now triggers
a lazy fetch from the submodule's promisor remote if the accessed object
is missing. This patch is a reworked version of [4], which was created
prior to Jonathan Tan's work.
[1]: 8721e2e (Merge branch 'jt/partial-clone-submodule-1', 2021-07-16)
[2]: 11e5d0a (Merge branch 'jt/grep-wo-submodule-odb-as-alternate',
2021-09-20)
[3]: 162a13b (Merge branch 'jt/no-abuse-alternate-odb-for-submodules',
2021-10-25)
[4]: https://lore.kernel.org/git/52bf9d45b8e2b72ff32aa773f2415bf7b2b86da2.1563322192.git.steadmon@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To improve the submodules UX, we would like to teach Git to handle
branches in submodules. Start this process by teaching "git branch" the
--recurse-submodules option so that "git branch --recurse-submodules
topic" will create the `topic` branch in the superproject and its
submodules.
Although this commit does not introduce breaking changes, it does not
work well with existing --recurse-submodules commands because "git
branch --recurse-submodules" writes to the submodule ref store, but most
commands only consider the superproject gitlink and ignore the submodule
ref store. For example, "git checkout --recurse-submodules" will check
out the commits in the superproject gitlinks (and put the submodules in
detached HEAD) instead of checking out the submodule branches.
Because of this, this commit introduces a new configuration value,
`submodule.propagateBranches`. The plan is for Git commands to
prioritize submodule ref store information over superproject gitlinks if
this value is true. Because "git branch --recurse-submodules" writes to
submodule ref stores, for the sake of clarity, it will not function
unless this configuration value is set.
This commit also includes changes that support working with submodules
from a superproject commit because "branch --recurse-submodules" (and
future commands) need to read .gitmodules and gitlinks from the
superproject commit, but submodules are typically read from the
filesystem's .gitmodules and the index's gitlinks. These changes are:
* add a submodules_of_tree() helper that gives the relevant
information of an in-tree submodule (e.g. path and oid) and
initializes the repository
* add is_tree_submodule_active() by adding a treeish_name parameter to
is_submodule_active()
* add the "submoduleNotUpdated" advice to advise users to update the
submodules in their trees
Incidentally, fix an incorrect usage string that combined the 'list'
usage of git branch (-l) with the 'create' usage; this string has been
incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use
parse_options., 2007-10-07).
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use static strings for constant parts of the sentences. They are all
turned into "cannot be used together".
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule deinit" for a submodule whose .git metadata
directory is embedded in its working tree refused to work, until
the submodule gets converted to use the "absorbed" form where the
metadata directory is stored in superproject, and a gitfile at the
top-level of the working tree of the submodule points at it. The
command is taught to convert such submodules to the absorbed form
as needed.
* mp/absorb-submodule-git-dir-upon-deinit:
submodule: absorb git dir instead of dying on deinit
|
|
Currently, running 'git submodule deinit' on repos where the
submodule's '.git' is a directory, aborts with a message that is not
exactly user friendly.
Let's change this to instead warn the user that the .git/ directory
has been absorbed into the superproject.
The rest of the deinit function can operate as it already does with
new-style submodules.
In one test, we used to require "git submodule deinit" to fail even
with the "--force" option when the submodule's .git/ directory is not
absorbed. Adjust it to expect the operation to pass.
Suggested-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Mugdha Pattnaik <mugdhapattnaik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Message regression fix.
* ks/submodule-add-message-fix:
submodule: drop unused sm_name parameter from append_fetch_remotes()
submodule--helper: fix incorrect newlines in an error message
|
|
Commit c21fb4676f (submodule--helper: fix incorrect newlines in an error
message, 2021-10-23) accidentally added a new, unused parameter while
changing the name and signature of show_fetch_remotes() to
append_fetch_remotes(). We can drop this to keep things simpler (and
satisfy -Wunused-parameter).
The error is likely because c21fb4676f is fixing a problem from
8c8195e9c3 (submodule--helper: introduce add-clone subcommand,
2021-07-10). An earlier iteration of that second commit introduced the
same unused parameter (though it was dropped before it finally made it
to 'next'), and the fix on top accidentally carried forward the extra
parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A refactoring[1] done as part of the recent conversion of
'git submodule add' to builtin, changed the error message
shown when a Git directory already exists locally for a submodule
name. Before the refactoring, the error used to appear like so:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
A git directory for 'subm' is found locally with remote(s):
origin /me/git-repos-for-test/sub
If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or you are unsure what this means choose another name with the '--name' option.
--- END OF OUTPUT ---
After the refactoring the error started appearing like so:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
A git directory for 'subm' is found locally with remote(s): origin /me/git-repos-for-test/sub
fatal: If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or if you are unsure what this means, choose another name with the '--name' option.
--- END OF OUTPUT ---
As one could observe the remote information is printed along with the
first line rather than on its own line. Also, there's an additional
newline following output.
Make the error message consistent with the error message that used to be
printed before the refactoring.
This also moves the 'fatal:' prefix that appears in the middle of the
error message to the first line as it would more appropriate to have
it in the first line. The output after the change would look like:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
fatal: A git directory for 'subm' is found locally with remote(s):
origin /me/git-repos-for-test/sub
If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or you are unsure what this means choose another name with the '--name' option.
--- END OF OUTPUT ---
[1]: https://lore.kernel.org/git/20210710074801.19917-5-raykar.ath@gmail.com/#t
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a missing strbuf_release() and a clear_pathspec() to the
submodule--helper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
|
|
Code clean-up.
* ab/designated-initializers:
cbtree.h: define cb_init() in terms of CBTREE_INIT
*.h: move some *_INIT to designated initializers
*.h _INIT macros: don't specify fields equal to 0
*.[ch] *_INIT macros: use { 0 } for a "zero out" idiom
submodule-config.h: remove unused SUBMODULE_INIT macro
|
|
More code paths that use the hack to add submodule's object
database to the set of alternate object store have been cleaned up.
* jt/add-submodule-odb-clean-up:
revision: remove "submodule" from opt struct
repository: support unabsorbed in repo_submodule_init
submodule: remove unnecessary unabsorbed fallback
|
|
Move various *_INIT macros to use designated initializers. This helps
readability. I've only picked those leftover macros that were not
touched by another in-flight series of mine which changed others, but
also how initialization was done.
In the case of SUBMODULE_ALTERNATE_SETUP_INIT I've left an explicit
initialization of "error_mode", even though
SUBMODULE_ALTERNATE_ERROR_IGNORE itself is defined as "0". Let's not
peek under the hood and assume that enum fields we know the value of
will stay at "0".
The change to "TESTSUITE_INIT" in "t/helper/test-run-command.c" was
part of an earlier on-list version[1] of c90be786da9 (test-tool
run-command: fix flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In C it isn't required to specify that all members of a struct are
zero'd out to 0, NULL or '\0', just providing a "{ 0 }" will
accomplish that.
Let's also change code that provided N zero'd fields to just
provide one, and change e.g. "{ NULL }" to "{ 0 }" for
consistency. I.e. even if the first member is a pointer let's use "0"
instead of "NULL". The point of using "0" consistently is to pick one,
and to not have the reader wonder why we're not using the same pattern
everywhere.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the last few commits we focused on code in unpack-trees.c that
mistakenly removed untracked files or directories. There may be more of
those, but in this commit we change our focus: callers of toplevel
commands that are expected to remove untracked files or directories.
As noted previously, we have toplevel commands that are expected to
delete untracked files such as 'read-tree --reset', 'reset --hard', and
'checkout --force'. However, that does not mean that other highlevel
commands that happen to call these other commands thought about or
conveyed to users the possibility that untracked files could be removed.
Audit the code for such callsites, and add comments near existing
callsites to mention whether these are safe or not.
My auditing is somewhat incomplete, though; it skipped several cases:
* git-rebase--preserve-merges.sh: is in the process of being
deprecated/removed, so I won't leave a note that there are
likely more bugs in that script.
* contrib/git-new-workdir: why is the -f flag being used in a new
empty directory?? It shouldn't hurt, but it seems useless.
* git-p4.py: Don't see why -f is needed for a new dir (maybe it's
not and is just superfluous), but I'm not at all familiar with
the p4 stuff
* git-archimport.perl: Don't care; arch is long since dead
* git-cvs*.perl: Don't care; cvs is long since dead
Also, the reset --hard in builtin/worktree.c looks safe, due to only
running in an empty directory.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code refactoring.
* jt/submodule-name-to-gitdir:
submodule: extract path to submodule gitdir func
|
|
Reimplementation of parts of "git submodule" in C continues.
* ar/submodule-run-update-procedure:
submodule--helper: run update procedures from C
|
|
More parts of "git submodule add" has been rewritten in C.
* ar/submodule-add-more:
submodule--helper: rename compute_submodule_clone_url()
submodule--helper: remove resolve-relative-url subcommand
submodule--helper: remove add-config subcommand
submodule--helper: remove add-clone subcommand
submodule--helper: convert the bulk of cmd_add() to C
dir: libify and export helper functions from clone.c
submodule--helper: remove repeated code in sync_submodule()
submodule--helper: refactor resolve_relative_url() helper
submodule--helper: add options for compute_submodule_clone_url()
|
|
Large part of "git submodule add" gets rewritten in C.
* ar/submodule-add-config:
submodule--helper: introduce add-config subcommand
|
|
We currently store each submodule gitdir in ".git/modules/<name>", but
this has problems with some submodule naming schemes, as described in a
comment in submodule_name_to_gitdir() in this patch.
Extract the determination of the location of a submodule's gitdir into
its own function submodule_name_to_gitdir(). For now, the problem
remains unsolved, but this puts us in a better position for finding a
solution.
This was motivated, at $DAYJOB, by a part of Android's repo hierarchy
[1]. In particular, there is a repo "build", and several repos of the
form "build/<name>".
This is based on earlier work by Brandon Williams [2].
[1] https://android.googlesource.com/platform/
[2] https://lore.kernel.org/git/20180808223323.79989-2-bmwill@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for a subsequent commit that migrates code using
add_submodule_odb() to repo_submodule_init(), teach
repo_submodule_init() to support submodules with unabsorbed gitdirs.
(See the documentation for "git submodule absorbgitdirs" for more
information about absorbed and unabsorbed gitdirs.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Glen Choo
Atharva Raykar
Ævar Arnfjörð Bjarmason
Abhradeep Chakraborty
Josh Steadmon
Jean-Noël Avila
Mugdha Pattnaik
Jeff King
Kaartic Sivaraam
Elijah Newren
Jonathan Tan