| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git submodule foreach" did not protect command line options passed
to the command to be run in each submodule correctly, when the
"--recursive" option was in use.
* ms/submodule-foreach-fix:
submodule foreach: fix recursion of options
|
|
Calling
git submodule foreach --recursive <subcommand> --<option>
leads to an error stating that the option --<option> is unknown to
submodule--helper. That is of course only, when <option> is not a valid
option for git submodule foreach.
The reason for this is, that above call is internally translated into a
call to submodule--helper:
git submodule--helper foreach --recursive \
-- <subcommand> --<option>
This call starts by executing the subcommand with its option inside the
first level submodule and continues by calling the next iteration of
the submodule foreach call
git --super-prefix <submodulepath> submodule--helper \
foreach --recursive <subcommand> --<option>
inside the first level submodule. Note that the double dash in front of
the subcommand is missing.
This problem starts to arise only recently, as the
PARSE_OPT_KEEP_UNKNOWN flag for the argument parsing of git submodule
foreach was removed in commit a282f5a906. Hence, the unknown option is
complained about now, as the argument parsing is not properly ended by
the double dash.
This commit fixes the problem by adding the double dash in front of the
subcommand during the recursion.
Signed-off-by: Morian Sonnet <moriansonnet@googlemail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* nd/submodule-helper-incomplete-line-fix:
submodule--helper: add a missing \n
|
|
This is a complete line. We're not expecting the next function to add
anything to the same line.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule foreach <command> --quiet" did not pass the option
down correctly, which has been corrected.
* nd/submodule-foreach-quiet:
submodule foreach: fix "<command> --quiet" not being respected
|
|
"git submodule" learns "set-branch" subcommand that allows the
submodule.*.branch settings to be modified.
* dl/submodule-set-branch:
submodule: teach set-branch subcommand
submodule--helper: teach config subcommand --unset
git-submodule.txt: "--branch <branch>" option defaults to 'master'
|
|
Robin reported that
git submodule foreach --quiet git pull --quiet origin
is not really quiet anymore [1]. "git pull" behaves as if --quiet is not
given.
This happens because parseopt in submodule--helper will try to parse
both --quiet options as if they are foreach's options, not git-pull's.
The parsed options are removed from the command line. So when we do
pull later, we execute just this
git pull origin
When calling submodule helper, adding "--" in front of "git pull" will
stop parseopt for parsing options that do not really belong to
submodule--helper foreach.
PARSE_OPT_KEEP_UNKNOWN is removed as a safety measure. parseopt should
never see unknown options or something has gone wrong. There are also
a couple usage string update while I'm looking at them.
While at it, I also add "--" to other subcommands that pass "$@" to
submodule--helper. "$@" in these cases are paths and less likely to be
--something-like-this. But the point still stands, git-submodule has
parsed and classified what are options, what are paths. submodule--helper
should never consider paths passed by git-submodule to be options even
if they look like one.
The test case is also contributed by Robin.
[1] it should be quiet before fc1b9243cd (submodule: port submodule
subcommand 'foreach' from shell to C, 2018-05-10) because parseopt
can't accidentally eat options then.
Reported-by: Robin H. Johnson <robbat2@gentoo.org>
Tested-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This hasn't been used since 17ddc66e70 (convert report_path_error to
take struct pathspec, 2013-07-14), as the names in the struct will have
already been prefixed when they were parsed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches submodule--helper config the --unset option, which removes
the specified configuration key from the .gitmodule file.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
|
|
"git fetch --recurse-submodules" may not fetch the necessary commit
that is bound to the superproject, which is getting corrected.
* sb/submodule-recursive-fetch-gets-the-tip:
fetch: ensure submodule objects fetched
submodule.c: fetch in submodules git directory instead of in worktree
submodule: migrate get_next_submodule to use repository structs
repository: repo_submodule_init to take a submodule struct
submodule: store OIDs in changed_submodule_names
submodule.c: tighten scope of changed_submodule_names struct
submodule.c: sort changed_submodule_names before searching it
submodule.c: fix indentation
sha1-array: provide oid_array_filter
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
|
|
"git submodule update" ought to use a single job unless asked, but
by mistake used multiple jobs, which has been fixed.
* sb/submodule-fetchjobs-default-to-one:
submodule update: run at most one fetch job unless otherwise set
|
|
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
|
|
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it. As we covered the only other case in
which a submodule loses its working tree in the earlier step
(i.e. switching branches of top-level project to move to a commit that did
not have the submodule), this makes the code always maintain
core.worktree correctly unset when there is no working tree
for a submodule.
This re-introduces 984cd77ddb (submodule deinit: unset core.worktree,
2018-06-18), which was reverted as part of f178c13fda (Revert "Merge
branch 'sb/submodule-core-worktree'", 2018-09-07)
The whole series was reverted as the offending commit e98317508c
(submodule: ensure core.worktree is set after update, 2018-06-18)
was relied on by other commits such as 984cd77ddb.
Keep the offending commit reverted, but its functionality came back via
4d6d6ef1fc (Merge branch 'sb/submodule-update-in-c', 2018-09-17), such
that we can reintroduce 984cd77ddb now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
74d4731da1 (submodule--helper: replace connect-gitdir-workingtree by
ensure-core-worktree, 2018-08-13) missed to update the BUG message.
Fix it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a028a1930c (fetching submodules: respect `submodule.fetchJobs`
config option, 2016-02-29), we made sure to keep the default
behavior of fetching at most one submodule at once when not setting
the newly introduced `submodule.fetchJobs` config.
This regressed in 90efe595c5 (builtin/submodule--helper: factor
out submodule updating, 2018-08-03). Fix it.
Reported-by: Sjon Hortensius <sjon@parse.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When constructing a struct repository for a submodule for some revision
of the superproject where the submodule is not contained in the index,
it may not be present in the working tree currently either. In that
situation giving a 'path' argument is not useful. Upgrade the
repo_submodule_init function to take a struct submodule instead.
The submodule struct can be obtained via submodule_from_{path, name} or
an artificial submodule struct can be passed in.
While we are at it, rename the repository struct in the repo_submodule_init
function, which is to be initialized, to a name that is not confused with
the struct submodule as easily. Perform such renames in similar functions
as well.
Also move its documentation into the header file.
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
|
|
In preparation for unifying the handling of alt odb's and the normal
repo object directory, let's use a more neutral name. This patch is
purely mechanical, swapping the type name, and converting any variables
named "alt" to "odb". There should be no functional change, but it will
reduce the noise in subsequent diffs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using strip_suffix() lets us avoid repeating ourselves. It also makes
the handling of "/" a bit less subtle (we strip one less character than
we matched in order to leave it in place, but we can just as easily
include the "/" when we add more path components).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some codepaths failed to form a proper URL when .gitmodules record
the URL to a submodule repository as relative to the repository of
superproject, which has been corrected.
* sb/submodule-url-to-absolute:
submodule helper: convert relative URL to absolute URL if needed
|
|
When the .gitmodules file is not available in the working tree, try
using the content from the index and from the current branch. This
covers the case when the file is part of the repository but for some
reason it is not checked out, for example because of a sparse checkout.
This makes it possible to use at least the 'git submodule' commands
which *read* the gitmodules configuration file without fully populating
the working tree.
Writing to .gitmodules will still require that the file is checked out,
so check for that before calling config_set_in_gitmodules_file_gently.
Add a similar check also in git-submodule.sh::cmd_add() to anticipate
the eventual failure of the "git submodule add" command when .gitmodules
is not safely writeable; this prevents the command from leaving the
repository in a spurious state (e.g. the submodule repository was cloned
but .gitmodules was not updated because
config_set_in_gitmodules_file_gently failed).
Moreover, since config_from_gitmodules() now accesses the global object
store, it is necessary to protect all code paths which call the function
against concurrent access to the global object store. Currently this
only happens in builtin/grep.c::grep_submodules(), so call
grep_read_lock() before invoking code involving
config_from_gitmodules().
Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading
from .gitmodules succeeds and that writing to it fails when the file is
not checked out.
NOTE: there is one rare case where this new feature does not work
properly yet: nested submodules without .gitmodules in their working
tree. This has been documented with a warning and a test_expect_failure
item in t7814, and in this case the current behavior is not altered: no
config is read.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* sb/submodule-helper-remove-cruft:
builtin/submodule--helper: remove debugging leftover tracing
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
I noticed 74d4731da1 (submodule--helper: replace connect-gitdir-workingtree
by ensure-core-worktree, 2018-08-13) had two leftover debugging statements
when reading The coverage report [1]. Remove them.
https://public-inbox.org/git/e30a9c05-87d8-1f2b-182c-6d6a5fefe43c@gmail.com/
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The submodule helper update_clone called by "git submodule update",
clones submodules if needed. As submodules used to have the URL indicating
if they were active, the step to resolve relative URLs was done in the
"submodule init" step. Nowadays submodules can be configured active without
calling an explicit init, e.g. via configuring submodule.active.
When trying to obtain submodules that are set active this way, we'll
fallback to the URL found in the .gitmodules, which may be relative to the
superproject, but we do not resolve it, yet:
git clone https://gerrit.googlesource.com/gerrit
cd gerrit && grep url .gitmodules
url = ../plugins/codemirror-editor
...
git config submodule.active .
git submodule update
fatal: repository '../plugins/codemirror-editor' does not exist
fatal: clone of '../plugins/codemirror-editor' into submodule path '/tmp/gerrit/plugins/codemirror-editor' failed
Failed to clone 'plugins/codemirror-editor'. Retry scheduled
[...]
fatal: clone of '../plugins/codemirror-editor' into submodule path '/tmp/gerrit/plugins/codemirror-editor' failed
Failed to clone 'plugins/codemirror-editor' a second time, aborting
[...]
To resolve the issue, factor out the function that resolves the relative
URLs in "git submodule init" (in the submodule helper in the init_submodule
function) and call it at the appropriate place in the update_clone helper.
Reported-by: Jaewoong Jung <jungjw@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a helper function named is_writing_gitmodules_ok() to verify
that the .gitmodules file is safe to write.
The function name follows the scheme of is_staging_gitmodules_ok().
The two symbolic constants GITMODULES_INDEX and GITMODULES_HEAD are used
to get help from the C preprocessor in preventing typos, especially for
future users.
This is in preparation for a future change which teaches git how to read
.gitmodules from the index or from the current branch if the file is not
available in the working tree.
The rationale behind the check is that writing to .gitmodules requires
the file to be present in the working tree, unless a brand new
.gitmodules is being created (in which case the .gitmodules file would
not exist at all: neither in the working tree nor in the index or in the
current branch).
Expose the functionality also via a "submodule-helper config
--check-writeable" command, as git scripts may want to perform the check
before modifying submodules configuration.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new 'config' subcommand to 'submodule--helper', this extra level
of indirection makes it possible to add some flexibility to how the
submodules configuration is handled.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Git 2.19.1
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.16:
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.
There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: joernchen <joernchen@phenoelit.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule update" is getting rewritten piece-by-piece into C.
* sb/submodule-update-in-c:
submodule--helper: introduce new update-module-mode helper
submodule--helper: replace connect-gitdir-workingtree by ensure-core-worktree
builtin/submodule--helper: factor out method to update a single submodule
builtin/submodule--helper: store update_clone information in a struct
builtin/submodule--helper: factor out submodule updating
git-submodule.sh: rename unused variables
git-submodule.sh: align error reporting for update mode to use path
|
|
This reverts commit 7e25437d35a70791b345872af202eabfb3e1a8bc, reversing
changes made to 00624d608cc69bd62801c93e74d1ea7a7ddd6598.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos and convert a question which does not expect to be replied
to a simple advice.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few preliminary minor clean-ups in the area around submodules.
* sb/submodule-cleanup:
builtin/submodule--helper: remove stray new line
t7410: update to new style
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This chews off a bit of the shell part of the update command in
git-submodule.sh. When writing the C code, keep in mind that the
submodule--helper part will go away eventually and we want to have
a C function that is able to determine the submodule update strategy,
it as a nicety, make determine_submodule_update_strategy accessible
for arbitrary repositories.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
e98317508c0 (submodule: ensure core.worktree is set after update,
2018-06-18) was overly aggressive in calling connect_work_tree_and_git_dir
as that ensures both the 'core.worktree' configuration is set as well as
setting up correct gitlink file pointing at the git directory.
We do not need to check for the gitlink in this part of the cmd_update
in git-submodule.sh, as the initial call to update-clone will have ensured
that. So we can reduce the work to only (check and potentially) set the
'core.worktree' setting.
While at it move the check from shell to C as that proves to be useful in
a follow up patch, as we do not need the 'name' in shell now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a later patch we'll find this method handy.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The information that is printed for update_submodules in
'submodule--helper update-clone' and consumed by 'git submodule update'
is stored as a string per submodule. This made sense at the time of
48308681b07 (git submodule update: have a dedicated helper for cloning,
2016-02-29), but as we want to migrate the rest of the submodule update
into C, we're better off having access to the raw information in a helper
struct.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Separate the command line parsing from the actual execution of the command
within the repository. For now there is not a lot of execution as
most of it is still in git-submodule.sh.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Morian Sonnet
Nguyễn Thái Ngọc Duy
Jeff King
Jeff Hostetler
Denton Liu
Stefan Beller
Antonio Ospite
Jonathan Nieder
Jean-Noël Avila