| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When commands are started from a subdirectory, they may have to
compare the path to the subdirectory (called prefix and found out
from $(pwd)) with the tracked paths. On macOS, $(pwd) and
readdir() yield decomposed path, while the tracked paths are
usually normalized to the precomposed form, causing mismatch. This
has been fixed by taking the same approach used to normalize the
command line arguments.
* tb/precompose-prefix-too:
MacOS: precompose_argv_prefix()
|
|
The following sequence leads to a "BUG" assertion running under MacOS:
DIR=git-test-restore-p
Adiarnfd=$(printf 'A\314\210')
DIRNAME=xx${Adiarnfd}yy
mkdir $DIR &&
cd $DIR &&
git init &&
mkdir $DIRNAME &&
cd $DIRNAME &&
echo "Initial" >file &&
git add file &&
echo "One more line" >>file &&
echo y | git restore -p .
Initialized empty Git repository in /tmp/git-test-restore-p/.git/
BUG: pathspec.c:495: error initializing pathspec_item
Cannot close git diff-index --cached --numstat
[snip]
The command `git restore` is run from a directory inside a Git repo.
Git needs to split the $CWD into 2 parts:
The path to the repo and "the rest", if any.
"The rest" becomes a "prefix" later used inside the pathspec code.
As an example, "/path/to/repo/dir-inside-repå" would determine
"/path/to/repo" as the root of the repo, the place where the
configuration file .git/config is found.
The rest becomes the prefix ("dir-inside-repå"), from where the
pathspec machinery expands the ".", more about this later.
If there is a decomposed form, (making the decomposing visible like this),
"dir-inside-rep°a" doesn't match "dir-inside-repå".
Git commands need to:
(a) read the configuration variable "core.precomposeunicode"
(b) precocompose argv[]
(c) precompose the prefix, if there was any
The first commit,
76759c7dff53 "git on Mac OS and precomposed unicode"
addressed (a) and (b).
The call to precompose_argv() was added into parse-options.c,
because that seemed to be a good place when the patch was written.
Commands that don't use parse-options need to do (a) and (b) themselfs.
The commands `diff-files`, `diff-index`, `diff-tree` and `diff`
learned (a) and (b) in
commit 90a78b83e0b8 "diff: run arguments through precompose_argv"
Branch names (or refs in general) using decomposed code points
resulting in decomposed file names had been fixed in
commit 8e712ef6fc97 "Honor core.precomposeUnicode in more places"
The bug report from above shows 2 things:
- more commands need to handle precomposed unicode
- (c) should be implemented for all commands using pathspecs
Solution:
precompose_argv() now handles the prefix (if needed), and is renamed into
precompose_argv_prefix().
Inside this function the config variable core.precomposeunicode is read
into the global variable precomposed_unicode, as before.
This reading is skipped if precomposed_unicode had been read before.
The original patch for preocomposed unicode, 76759c7dff53, placed
precompose_argv() into parse-options.c
Now add it into git.c::run_builtin() as well. Existing precompose
calls in diff-files.c and others may become redundant, and if we
audit the callflows that reach these places to make sure that they
can never be reached without going through the new call added to
run_builtin(), we might be able to remove these existing ones.
But in this commit, we do not bother to do so and leave these
precompose callsites as they are. Because precompose() is
idempotent and can be called on an already precomposed string
safely, this is safer than removing existing calls without fully
vetting the callflows.
There is certainly room for cleanups - this change intends to be a bug fix.
Cleanups needs more tests in e.g. t/t3910-mac-os-precompose.sh, and should
be done in future commits.
[1] git-bugreport-2021-01-06-1209.txt (git can't deal with special characters)
[2] https://lore.kernel.org/git/A102844A-9501-4A86-854D-E3B387D378AA@icloud.com/
Reported-by: Daniel Troger <random_n0body@icloud.com>
Helped-By: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the guidelines in parse-options.h,
we should not end in a full stop or start with
a capital letter. Fix old error and usage
messages to match this expectation.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In command line options, variables are entered between < and >
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixups to a topic in 'next'.
* ss/submodule-summary-in-c-fixes:
t7421: eliminate 'grep' check in t7421.4 for mingw compatibility
submodule: fix style in function definition
submodule: eliminate unused parameters from print_submodule_summary()
|
|
Yet another subcommand of "git submodule" is getting rewritten in C.
* ss/submodule-summary-in-c:
submodule: port submodule subcommand 'summary' from shell to C
t7421: introduce a test script for verifying 'summary' output
submodule: rename helper functions to avoid ambiguity
submodule: remove extra line feeds between callback struct and macro
|
|
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
|
|
The 'grep' check in test 4 of t7421 resulted in the failure of t7421 on
Windows due to a different error message
error: cannot spawn git: No such file or directory
instead of
fatal: exec 'rev-parse': cd to 'my-subm' failed: No such file or directory
Tighten up the check to compute 'src_abbrev' by guarding the
'verify_submodule_committish()' call using `p->status !='D'`, so that
the former isn't called in case of non-existent submodule directory,
consequently, there is no such error message on any execution
environment. The same need not be implemented for 'dst_abbrev' and is
rather redundant since the conditional 'if (S_ISGITLINK(p->mod_dst))'
already guards the 'verify_submodule_committish()' when we have a
status of 'D'.
Therefore, eliminate the 'grep' check in t7421. Instead, verify the
absence of an error message by doing a 'test_must_be_empty' on the
file containing the error.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The definitions of 'verify_submodule_committish()' and
'print_submodule_summary()' had wrong styling in terms of the asterisk
placement. Amend them.
Also, the warning printed in case of an unexpected file mode printed the
mode in decimal. Print it in octal for enhanced readability.
Reported-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eliminate the parameters 'missing_{src,dst}' from the
'print_submodule_summary()' function call since they are not used
anywhere in the function.
Reported-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the ensure_core_worktree() function, we load the core.worktree value
of the submodule repository using repo_config_get_string(). This
function copies the string, but we never free it, leaking the memory.
We can instead use the "tmp" version of that function to avoid the
allocation at all. We don't have to worry about lifetime issues, since
we never even look at the value (we just want to know if it's set).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two functions to get a single config string:
- git_config_get_string()
- git_config_get_string_const()
One might naively think that the first one allocates a new string and
the second one just points us to the internal configset storage. But
in fact they both allocate a new copy; the second one exists only to
avoid having to cast when using it with a const global which we never
intend to free.
The documentation for the function explains that clearly, but it seems
I'm not alone in being surprised by this. Of 17 calls to the function,
13 of them leak the resulting value.
We could obviously fix these by adding the appropriate free(). But it
would be simpler still if we actually had a non-allocating way to get
the string. There's git_config_get_value() but that doesn't quite do
what we want. If the config key is present but is a boolean with no
value (e.g., "[foo]bar" in the file), then we'll get NULL (whereas the
string versions will print an error and die).
So let's introduce a new variant, git_config_get_string_tmp(), that
behaves as these callers expect. We need a new name because we have new
semantics but the same function signature (so even if we converted the
four remaining callers, topics in flight might be surprised). The "tmp"
is because this value should only be held onto for a short time. In
practice it's rare for us to clear and refresh the configset,
invalidating the pointer, but hopefully the "tmp" makes callers think
about the lifetime. In each of the converted cases here the value only
needs to last within the local function or its immediate caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The prepare_to_clone_next_submodule() function has a few local-variable
strbufs. We use strbuf_reset() throughout the function to reuse the
buffers over and over. But at the end of the function we also use
strbuf_reset() as they go out of scope, which means we end up leaking
their heap buffers. This should be strbuf_release() instead.
These were introduced by 48308681b0 (git submodule update: have a
dedicated helper for cloning, 2016-02-29), but it doesn't seem to have
the same mistake elsewhere. Likewise, I looked for other instances of
the pattern in the submodule--helper file but couldn't find any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert submodule subcommand 'summary' to a builtin and call it via
'git-submodule.sh'.
The shell version had to call $diff_cmd twice, once to find the modified
modules cared by the user and then again, with that list of modules
to do various operations for computing the summary of those modules.
On the other hand, the C version does not need a second call to
$diff_cmd since it reuses the module list from the first call to do the
aforementioned tasks.
In the C version, we use the combination of setting a child process'
working directory to the submodule path and then calling
'prepare_submodule_repo_env()' which also sets the 'GIT_DIR' to '.git',
so that we can be certain that those spawned processes will not access
the superproject's ODB by mistake.
A behavioural difference between the C and the shell version is that the
shell version outputs two line feeds after the 'git log' output when run
outside of the tests while the C version outputs one line feed in any
case. The reason for this is that the shell version calls log with
'--pretty=format:<fmt>' whose output is followed by two echo
calls; 'format' does not have "terminator" semantics like its 'tformat'
counterpart. So, the log output is terminated by a newline only when
invoked by the user and not when invoked from the scripts. This results
in the one & two line feed differences in the shell version.
On the other hand, the C version calls log with '--pretty=<fmt>'
which is equivalent to '--pretty:tformat:<fmt>' which is then
followed by a 'printf("\n")'. Due to its "terminator" semantics the
log output is always terminated by newline and hence one line feed in
any case.
Also, when we try to pass an option-like argument after a non-option
argument, for instance:
git submodule summary HEAD --foo-bar
(or)
git submodule summary HEAD --cached
That argument would be treated like a path to the submodule for which
the user is requesting a summary. So, the option ends up having no
effect. Though, passing '--quiet' is an exception to this:
git submodule summary HEAD --quiet
While 'summary' doesn't support '--quiet', we don't get an output for
the above command as '--quiet' is treated as a path which means we get
an output only if a submodule whose path is '--quiet' exists.
The error message in case of computing a summary for non-existent
submodules in the C version is different from that of the shell version.
Since the new error message is not marked for translation, change the
'test_i18ngrep' in t7421.4 to 'grep'.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Stefan Beller <stefanbeller@gmail.com>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many `submodule--helper` subcommands follow the convention that a struct
defines their callback data, and the declaration of that struct is
followed immediately by a macro to use in static initializers, without
any separating empty line.
Let's align the `init`, `status` and `sync` subcommands with that convention.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
|
|
When `remote.<name>.branch` is not configured, `git submodule update`
currently falls back to using the branch name `master`. A much better
idea, however, is to use the remote `HEAD`: on all Git servers running
reasonably recent Git versions, the symref `HEAD` points to the main
branch.
Note: t7419 demonstrates that there _might_ be use cases out there that
_expect_ `git submodule update --remote` to update submodules to the
remote `master` branch even if the remote `HEAD` points to another
branch. Arguably, this patch makes the behavior more intuitive, but
there is a slight possibility that this might cause regressions in
obscure setups.
Even so, it should be okay to fix this behavior without anything like a
longer transition period:
- The `git submodule update --remote` command is not really common.
- Current Git's behavior when running this command is outright
confusing, unless the remote repository's current branch _is_ `master`
(in which case the proposed behavior matches the old behavior).
- If a user encounters a regression due to the changed behavior, the fix
is actually trivial: setting `submodule.<name>.branch` to `master`
will reinstate the old behavior.
Helped-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert submodule subcommand 'set-branch' to a builtin and call it via
'git-submodule.sh'.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert submodule subcommand 'set-url' to a builtin. Port 'set-url' to
'submodule--helper.c' and call the latter via 'git-submodule.sh'.
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 'submodule--helper.c', the structures and macros for callbacks belonging
to any subcommand are named in the format: 'subcommand_cb' and 'SUBCOMMAND_CB_INIT'
respectively.
This was an exception for the subcommand 'foreach' of the command
'submodule'. Rename the aforementioned structures and macros:
'struct cb_foreach' to 'struct foreach_cb' and 'CB_FOREACH_INIT'
to 'FOREACH_CB_INIT'.
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone --recurse-submodules --single-branch" now uses the same
single-branch option when cloning the submodules.
* es/recursive-single-branch-clone:
clone: pass --single-branch during --recurse-submodules
submodule--helper: use C99 named initializer
|
|
Previously, performing "git clone --recurse-submodules --single-branch"
resulted in submodules cloning all branches even though the superproject
cloned only one branch. Pipe --single-branch through the submodule
helper framework to make it to 'clone' later on.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start using a named initializer list for SUBMODULE_UPDATE_CLONE_INIT, as
the struct is becoming cumbersome for a typical struct initializer list.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way "git submodule status" reports an initialized but not yet
populated submodule has not been reimplemented correctly when a
part of the "git submodule" command was rewritten in C, which has
been corrected.
* pk/status-of-uncloned-submodule:
t7400: testcase for submodule status on unregistered inner git repos
submodule: fix status of initialized but not cloned submodules
t7400: add a testcase for submodule status on empty dirs
|
|
Original bash helper for "submodule status" was doing a check for
initialized but not cloned submodules and prefixed the status with
a minus sign in case no .git file or folder was found inside the
submodule directory.
This check was missed when the original port of the functionality
from bash to C was done.
Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The interaction between "git clone --recurse-submodules" and
alternate object store was ill-designed. The documentation and
code have been taught to make more clear recommendations when the
users see failures.
* jt/clone-recursesub-ref-advise:
submodule--helper: advise on fatal alternate error
Doc: explain submodule.alternateErrorStrategy
|
|
|
|
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
|
|
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
|
|
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
|
|
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
|
|
In v2.15.4, we started to reject `submodule.update` settings in
`.gitmodules`. Let's raise a BUG if it somehow still made it through
from anywhere but the Git config.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
|
|
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
|
|
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
|
|
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
|
|
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
|
|
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
|
|
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
|
|
"git submodule status" that is run from a subdirectory of the
superproject did not work well, which has been corrected.
* mg/submodule-status-from-a-subdirectory:
submodule: fix 'submodule status' when called from a subdirectory
|
|
Currently it is technically possible to let a submodule's git
directory point right into the git dir of a sibling submodule.
Example: the git directories of two submodules with the names `hippo`
and `hippo/hooks` would be `.git/modules/hippo/` and
`.git/modules/hippo/hooks/`, respectively, but the latter is already
intended to house the former's hooks.
In most cases, this is just confusing, but there is also a (quite
contrived) attack vector where Git can be fooled into mistaking remote
content for file contents it wrote itself during a recursive clone.
Let's plug this bug.
To do so, we introduce the new function `validate_submodule_git_dir()`
which simply verifies that no git dir exists for any leading directories
of the submodule name (if there are any).
Note: this patch specifically continues to allow sibling modules names
of the form `core/lib`, `core/doc`, etc, as long as `core` is not a
submodule name.
This fixes CVE-2019-1387.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
In addition to preventing `.git` from being tracked by Git, on Windows
we also have to prevent `git~1` from being tracked, as the default NTFS
short name (also known as the "8.3 filename") for the file name `.git`
is `git~1`, otherwise it would be possible for malicious repositories to
write directly into the `.git/` directory, e.g. a `post-checkout` hook
that would then be executed _during_ a recursive clone.
When we implemented appropriate protections in 2b4c6efc821 (read-cache:
optionally disallow NTFS .git variants, 2014-12-16), we had analyzed
carefully that the `.git` directory or file would be guaranteed to be
the first directory entry to be written. Otherwise it would be possible
e.g. for a file named `..git` to be assigned the short name `git~1` and
subsequently, the short name generated for `.git` would be `git~2`. Or
`git~3`. Or even `~9999999` (for a detailed explanation of the lengths
we have to go to protect `.gitmodules`, see the commit message of
e7cb0b4455c (is_ntfs_dotgit: match other .git files, 2018-05-11)).
However, by exploiting two issues (that will be addressed in a related
patch series close by), it is currently possible to clone a submodule
into a non-empty directory:
- On Windows, file names cannot end in a space or a period (for
historical reasons: the period separating the base name from the file
extension was not actually written to disk, and the base name/file
extension was space-padded to the full 8/3 characters, respectively).
Helpfully, when creating a directory under the name, say, `sub.`, that
trailing period is trimmed automatically and the actual name on disk
is `sub`.
This means that while Git thinks that the submodule names `sub` and
`sub.` are different, they both access `.git/modules/sub/`.
- While the backslash character is a valid file name character on Linux,
it is not so on Windows. As Git tries to be cross-platform, it
therefore allows backslash characters in the file names stored in tree
objects.
Which means that it is totally possible that a submodule `c` sits next
to a file `c\..git`, and on Windows, during recursive clone a file
called `..git` will be written into `c/`, of course _before_ the
submodule is cloned.
Note that the actual exploit is not quite as simple as having a
submodule `c` next to a file `c\..git`, as we have to make sure that the
directory `.git/modules/b` already exists when the submodule is checked
out, otherwise a different code path is taken in `module_clone()` that
does _not_ allow a non-empty submodule directory to exist already.
Even if we will address both issues nearby (the next commit will
disallow backslash characters in tree entries' file names on Windows,
and another patch will disallow creating directories/files with trailing
spaces or periods), it is a wise idea to defend in depth against this
sort of attack vector: when submodules are cloned recursively, we now
_require_ the directory to be empty, addressing CVE-2019-1349.
Note: the code path we patch is shared with the code path of `git
submodule update --init`, which must not expect, in general, that the
directory is empty. Hence we have to introduce the new option
`--force-init` and hand it all the way down from `git submodule` to the
actual `git submodule--helper` process that performs the initial clone.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
When recursively cloning a superproject with some shallow modules
defined in its .gitmodules, then recloning with "--reference=<path>", an
error occurs. For example:
git clone --recurse-submodules --branch=master -j8 \
https://android.googlesource.com/platform/superproject \
master
git clone --recurse-submodules --branch=master -j8 \
https://android.googlesource.com/platform/superproject \
--reference master master2
fails with:
fatal: submodule '<snip>' cannot add alternate: reference repository
'<snip>' is shallow
When a alternate computed from the superproject's alternate cannot be
added, whether in this case or another, advise about configuring the
"submodule.alternateErrorStrategy" configuration option and using
"--reference-if-able" instead of "--reference" when cloning.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When calling `git submodule status` while in a subdirectory, we are
incorrectly not detecting modified submodules and
thus reporting that all of the submodules are unchanged.
This is because the submodule helper is calling `diff-index` with the
submodule path assuming the path is relative to the current prefix
directory, however the submodule path used is actually relative to the root.
Always pass NULL as the `prefix` when running diff-files on the
submodule, to make sure the submodule's path is interpreted as relative
to the superproject's repository root.
Signed-off-by: Manish Goregaokar <manishsmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
|
|
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the existing uses of null_sha1 can be converted into uses of
null_oid, so do so. Remove null_sha1 and is_null_sha1, and define
is_null_oid in terms of null_oid. This also has the additional benefit
of removing several uses of sha1_to_hex.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule foreach" did not protect command line options passed
to the command to be run in each submodule correctly, when the
"--recursive" option was in use.
* ms/submodule-foreach-fix:
submodule foreach: fix recursion of options
|
Junio C Hamano
Torsten Bögershausen
ZheNing Hu
Jean-Noël Avila
Shourya Shukla
Jeff King
Prathamesh Chavan
Johannes Schindelin
Emily Shaffer
Peter Kaestle
Jonathan Nieder
Jonathan Tan
Manish Goregaokar
Bert Wesarg
brian m. carlson