| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
|
|
API fix.
* js/run-process-parallel-api-fix:
run_processes_parallel: change confusing task_cb convention
|
|
By declaring the task_cb parameter of type `void **`, the signature of
the get_next_task method suggests that the "task-specific cookie" can be
defined in that method, and the signatures of the start_failure and of
the task_finished methods declare that parameter of type `void *`,
suggesting that those methods are mere users of said cookie.
That convention makes a total lot of sense, because the tasks are pretty
much dead when one of the latter two methods is called: there would be
little use to reset that cookie at that point because nobody would be
able to see the change afterwards.
However, this is not what the code actually does. For all three methods,
it passes the *address* of pp->children[i].data.
As reasoned above, this behavior makes no sense. So let's change the
implementation to adhere to the convention suggested by the signatures.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 06bf4ad1d (push: propagate remote and refspec with
--recurse-submodules) push was taught how to propagate a refspec down to
submodules when the '--recurse-submodules' flag is given. The only refspecs
that are allowed to be propagated are ones which name a ref which exists
in both the superproject and the submodule, with the caveat that 'HEAD'
was disallowed.
This patch teaches push-check (the submodule helper which determines if
a refspec can be propagated to a submodule) to permit propagating 'HEAD'
if and only if the superproject and the submodule both have the same
named branch checked out and the submodule is not in a detached head
state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* jc/utf8-fprintf:
submodule--helper: do not call utf8_fprintf() unnecessarily
|
|
The helper function utf8_fprintf(fp, ...) has exactly the same
effect to the output stream fp as fprintf(fp, ...) does, and the
only difference is that its return value counts in display columns
consumed (assuming that the payload is encoded in UTF-8), as opposed
to number of bytes.
There is no reason to call it unless the caller cares about its
return value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'is_submodule_initialized()' to take a repository object and
while we're at it, lets rename the function to 'is_submodule_active()'
and remove the NEEDSWORK comment.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
bw/repo-object
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
|
|
"git $cmd -h" for builtin commands calls the implementation of the
command (i.e. cmd_$cmd() function) without doing any repository
set-up, and the commands that expect RUN_SETUP is done by the Git
potty needs to be prepared to show the help text without barfing.
* jk/consistent-h:
t0012: test "-h" with builtins
git: add hidden --list-builtins option
version: convert to parse-options
diff- and log- family: handle "git cmd -h" early
submodule--helper: show usage for "-h"
remote-{ext,fd}: print usage message on invalid arguments
upload-archive: handle "-h" option early
credential: handle invalid arguments earlier
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Normal users shouldn't ever call submodule--helper, but it
doesn't hurt to give them a normal usage message if they try
"-h".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since (ae8d08242 pathspec: pass directory indicator to
match_pathspec_item()) the path matching logic has been able to cope
with submodules without needing to strip off a trailing slash if a path
refers to a submodule.
Since stripping the slash is no longer necessary, remove the
PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a segv in 'submodule init' when url is not given for a submodule.
* jk/submodule-init-segv-fix:
submodule_init: die cleanly on submodules without url defined
|
|
When we init a submodule, we try to die when it has no URL
defined:
url = xstrdup(sub->url);
if (!url)
die(...);
But that's clearly nonsense. xstrdup() will never return
NULL, and if sub->url is NULL, we'll segfault.
These two bits of code need to be flipped, so we check
sub->url before looking at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message fix.
* bw/submodule-is-active:
submodule--helper: fix typo in is_active error message
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the 'push-check' subcommand to submodule--helper which is used to
check if the provided remote and refspec can be used as part of a push
operation in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"what URL do we want to update this submodule?" and "are we
interested in this submodule?" are split into two distinct
concepts, and then the way used to express the latter got extended,
paving a way to make it easier to manage a project with many
submodules and make it possible to later extend use of multiple
worktrees for a project with submodules.
* bw/submodule-is-active:
submodule add: respect submodule.active and submodule.<name>.active
submodule--helper init: set submodule.<name>.active
clone: teach --recurse-submodules to optionally take a pathspec
submodule init: initialize active submodules
submodule: decouple url and submodule interest
submodule--helper clone: check for configured submodules using helper
submodule sync: use submodule--helper is-active
submodule sync: skip work for inactive submodules
submodule status: use submodule--helper is-active
submodule--helper: add is-active subcommand
|
|
"git checkout" is taught the "--recurse-submodules" option.
* sb/checkout-recurse-submodules:
builtin/read-tree: add --recurse-submodules switch
builtin/checkout: add --recurse-submodules switch
entry.c: create submodules when interesting
unpack-trees: check if we can perform the operation for submodules
unpack-trees: pass old oid to verify_clean_submodule
update submodules: add submodule_move_head
submodule.c: get_super_prefix_or_empty
update submodules: move up prepare_submodule_repo_env
submodules: introduce check to see whether to touch a submodule
update submodules: add a config option to determine if submodules are updated
update submodules: add submodule config parsing
make is_submodule_populated gently
lib-submodule-update.sh: define tests for recursing into submodules
lib-submodule-update.sh: replace sha1 by hash
lib-submodule-update: teach test_submodule_content the -C <dir> flag
lib-submodule-update.sh: do not use ./. as submodule remote
lib-submodule-update.sh: reorder create_lib_submodule_repo
submodule--helper.c: remove duplicate code
connect_work_tree_and_git_dir: safely create leading directories
|
|
When initializing a submodule set the submodule.<name>.active config to
true if the module hasn't already been configured to be active by some
other means (e.g. a pathspec set in submodule.active).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach `submodule init` to initialize submodules which have been
configured to be active by setting 'submodule.active' with a pathspec.
Now if no path arguments are given and 'submodule.active' is configured,
`init` will initialize all submodules which have been configured to be
active. If no path arguments are given and 'submodule.active' is not
configured, then `init` will retain the old behavior of initializing all
submodules.
This allows users to record more complex patterns as it saves retyping
them whenever you invoke update.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the 'is_submodule_initialized()' helper to check for configured
submodules instead of manually checking for the submodule's URL in the
config.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The definition of which submodules are of interest by the user
is tied to the configuration submodule.<name>.url; when it is
set to a non-empty string, it is of interest. We'd want to be
able to later change this definition, but there are many places
that explicitly check this condition in the scripted Porcelain.
Introduce the "is-active" subcommand to "submodule--helper", so
that the exact definition of what submodule is of interest can
be centrally defined (and changed in later steps). In a few
patches that follow, this helper is used to replace the explicit
checks of the configuration variable in scripts.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove code fragment from module_clone that duplicates functionality
of connect_work_tree_and_git_dir in dir.c
Signed-off-by: Valery Tolstov <me@vtolstov.org>
Reviewed-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a submodule is initialized, the config variable 'submodule.<name>.url'
is set depending on the value of the same variable in the .gitmodules
file. When the URL indicates to be relative, then the url is computed
relative to its default remote. The default remote cannot be determined
accurately in all cases, such that it falls back to 'origin'.
The 'origin' remote may not exist, though. In that case we give up looking
for a suitable remote and we'll just assume it to be a local relative path.
This can be confusing to users as there is a lot of guessing involved,
which is not obvious to the user.
So in the corner case of assuming a local autoritative truth, warn the
user to lessen the confusion.
This behavior was introduced in 4d6893200 (submodule add: allow relative
repository path even when no url is set, 2011-06-06), which shared the
code with submodule-init and then ported to C in 3604242f080a (submodule:
port init from shell to C, 2016-04-15).
In case of submodule-add, this behavior makes sense in some use cases[1],
however for submodule-init there does not seem to be an immediate obvious
use case to fall back to a local submodule. However there might be, so
warn instead of die here.
While adding the warning, also clarify the behavior of relative URLs in
the documentation.
[1] e.g. http://stackoverflow.com/questions/8721984/git-ignore-files-for-public-repository-but-not-for-private
"store a secret locally in a submodule, with no intention to publish it"
Reported-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/absolute-pathdup:
use absolute_pathdup()
abspath: add absolute_pathdup()
|
|
Apply the semantic patch for converting callers that duplicate the
result of absolute_path() to call absolute_pathdup() instead, which
avoids an extra string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message fix.
* sb/submodule-init:
submodule update --init: display correct path from submodule
|
|
In the submodule helper we did not correctly handled the display path
for initializing submodules when both the submodule is inside a
subdirectory as well as the command being invoked from a subdirectory
(as viewed from the superproject).
This was broken in 3604242f080, which was written at a time where
there was no super-prefix available, so we abused the --prefix option
for the same purpose and could get only one case right (the call from
within a subdirectory, not the submodule being in a subdirectory).
Test-provided-by: David Turner <novalis@novalis.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new submodule helper "git submodule embedgitdirs" to make it
easier to move embedded .git/ directory for submodules in a
superproject to .git/modules/ (and point the latter with the former
that is turned into a "gitdir:" file) has been added.
* sb/submodule-embed-gitdir:
worktree: initialize return value for submodule_uses_worktrees
submodule: add absorb-git-dir function
move connect_work_tree_and_git_dir to dir.h
worktree: check if a submodule uses worktrees
test-lib-functions.sh: teach test_commit -C <dir>
submodule helper: support super prefix
submodule: use absolute path for computing relative path connecting
|
|
When a submodule has its git dir inside the working dir, the submodule
support for checkout that we plan to add in a later patch will fail.
Add functionality to migrate the git directory to be absorbed
into the superprojects git directory.
The newly added code in this patch is structured such that other areas of
Git can also make use of it. The code in the submodule--helper is a mere
wrapper and option parser for the function
`absorb_git_dir_into_superproject`, that takes care of embedding the
submodules git directory into the superprojects git dir. That function
makes use of the more abstract function for this use case
`relocate_gitdir`, which can be used by e.g. the worktree code eventually
to move around a git directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 31224cbdc7 (clone: recursive and reference option triggers
submodule alternates, 2016-08-17) a mechanism was added to
have submodules referenced. It did not address _nested_
submodules, however.
This patch makes all not just the root repository, but also
all submodules (recursively) have submodule.alternateLocation
and submodule.alternateErrorStrategy configured, making Git
search for possible alternates for nested submodules as well.
As submodule's alternate target does not end in .git/objects
(rather .git/modules/qqqqqq/objects), this alternate target
path restriction for in add_possible_reference_from_superproject
relates from "*.git/objects" to just */objects".
New tests have been added to t7408-submodule-reference.
Signed-off-by: Vitaly _Vi Shukela <vi0oss@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like main commands in Git, the submodule helper needs
access to the superproject prefix. Enable this in the git.c
but have its own fuse in the helper code by having a flag to
turn on the super prefix.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A minor regression fix for "git submodule".
* sb/submodule-ignore-trailing-slash:
t0060: sidestep surprising path mangling results on Windows
submodule: ignore trailing slash in relative url
submodule: ignore trailing slash on superproject URL
|
|
Codepaths involved in interacting alternate object store have
been cleaned up.
* jk/alt-odb-cleanup:
alternates: use fspathcmp to detect duplicates
sha1_file: always allow relative paths to alternates
count-objects: report alternates via verbose mode
fill_sha1_file: write into a strbuf
alternates: store scratch buffer as strbuf
fill_sha1_file: write "boring" characters
alternates: use a separate scratch space
alternates: encapsulate alt->base munging
alternates: provide helper for allocating alternate
alternates: provide helper for adding to alternates list
link_alt_odb_entry: refactor string handling
link_alt_odb_entry: handle normalize_path errors
t5613: clarify "too deep" recursion tests
t5613: do not chdir in main process
t5613: whitespace/style cleanups
t5613: use test_must_fail
t5613: drop test_valid_repo function
t5613: drop reachable_via function
|
|
The alternate_object_database struct uses a single buffer
both for storing the path to the alternate, and as a scratch
buffer for forming object names. This is efficient (since
otherwise we'd end up storing the path twice), but it makes
life hard for callers who just want to know the path to the
alternate. They have to remember to stop reading after
"alt->name - alt->base" bytes, and to subtract one for the
trailing '/'.
It would be much simpler if they could simply access a
NUL-terminated path string. We could encapsulate this in a
function which puts a NUL in the scratch buffer and returns
the string, but that opens up questions about the lifetime
of the result. The first time another caller uses the
alternate, the scratch buffer may get other data tacked onto
it.
Let's instead just store the root path separately from the
scratch buffer. There aren't enough alternates being stored
for the duplicated data to matter for performance, and this
keeps things simple and safe for the callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is similar to the previous patch, though no user reported a bug and
I could not find a regressive behavior.
However it is a good thing to be strict on the output and for that we
always omit a trailing slash.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before 63e95beb0 (2016-04-15, submodule: port resolve_relative_url from
shell to C), it did not matter if the superprojects URL had a trailing
slash or not. It was just chopped off as one of the first steps
(The "remoteurl=${remoteurl%/}" near the beginning of
resolve_relative_url(), which was removed in said commit).
When porting this to the C version, an off-by-one error was introduced
and we did not check the actual last character to be a slash, but the
NULL delimiter.
Reintroduce the behavior from before 63e95beb0, to ignore the trailing
slash.
Reported-by: <venv21@gmail.com>
Helped-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up with help from coccinelle tool continues.
* rs/cocci:
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
|
|
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This is shorter and makes the intent clearer.
bc57b9c0cc5a123365a922fa1831177e3fd607ed already converted three cases,
this patch covers two more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone --recurse-submodules" lost the progress eye-candy in
recent update, which has been corrected.
* jk/clone-recursive-progress:
clone: pass --progress decision to recursive submodules
|
|
Code cleanup.
* rs/cocci:
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
|
|
When cloning with "--recursive", we'd generally expect
submodules to show progress reports if the main clone did,
too.
In older versions of git, this mostly worked out of the
box. Since we show progress by default when stderr is a tty,
and since the child clones inherit the parent stderr, then
both processes would come to the same decision by default.
If the parent clone was asked for "--quiet", we passed down
"--quiet" to the child. However, if stderr was not a tty and
the user specified "--progress", we did not propagate this
to the child.
That's a minor bug, but things got much worse when we
switched recently to submodule--helper's update_clone
command. With that change, the stderr of the child clones
are always connected to a pipe, and we never output
progress at all.
This patch teaches git-submodule and git-submodule--helper
how to pass down an explicit "--progress" flag when cloning.
The clone command then decides to propagate that flag based
on the cloning decision made earlier (which takes into
account isatty(2) of the parent process, existing --progress
or --quiet flags, etc). Since the child processes always run
without a tty on stderr, we don't have to worry about
passing an explicit "--no-progress"; it's the default for
them.
This fixes the recent loss of progress during recursive
clones. And as a bonus, it makes:
git clone --recursive --progress ... 2>&1 | cat
work by triggering progress explicitly in the children.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
|
|
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This makes the intent clearer and avoids
potential issues with printf format specifiers.
02962d36845b89145cd69f8bc65e015d78ae3434 already converted six cases,
this patch covers eleven more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone --resurse-submodules --reference $path $URL" is a way to
reduce network transfer cost by borrowing objects in an existing
$path repository when cloning the superproject from $URL; it
learned to also peek into $path for presense of corresponding
repositories of submodules and borrow objects from there when able.
* sb/submodule-clone-rr:
clone: recursive and reference option triggers submodule alternates
clone: implement optional references
clone: clarify option_reference as required
clone: factor out checking for an alternate path
submodule--helper update-clone: allow multiple references
submodule--helper module-clone: allow multiple references
t7408: merge short tests, factor out testing method
t7408: modernize style
|
|
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `--recursive` and `--reference` is given, it is reasonable to
expect that the submodules are created with references to the submodules
of the given alternate for the superproject.
An initial attempt to do this was presented to the mailing list, which
used flags that are passed around ("--super-reference") that instructed
the submodule clone to look for a reference in the submodules of the
referenced superproject. This is not well thought out, as any further
`submodule update` should also respect the initial setup.
When a new submodule is added to the superproject and the alternate
of the superproject does not know about that submodule yet, we rather
error out informing the user instead of being unclear if we did or did
not use a submodules alternate.
To solve this problem introduce new options that store the configuration
for what the user wanted originally.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow the user to pass in multiple references to update_clone.
Currently this is only internal API, but once the shell script is
replaced by a C version, this is needed.
This fixes an API bug between the shell script and the helper.
Currently the helper accepts "--reference" "--reference=foo"
as a OPT_STRING whose value happens to be "--reference=foo", and
then uses
if (suc->reference)
argv_array_push(&child->args, suc->reference)
where suc->reference _is_ "--reference=foo" when invoking the
underlying "git clone", it cancels out.
With this change we omit one of the "--reference" arguments when
passing references from the shell script to the helper.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow users to pass in multiple references, just as clone accepts multiple
references as well.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Johannes Schindelin
Brandon Williams
Jeff King
Stefan Beller
Valery Tolstov
René Scharfe
Vitaly "_Vi" Shukela
brian m. carlson