| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
|
|
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The dir structure seemed to have a number of leaks and problems around
it. First I noticed that parent_hashmap and recursive_hashmap were
being leaked (though Peff noticed and submitted fixes before me). Then
I noticed in the previous commit that clear_directory() was only taking
responsibility for a subset of fields within dir_struct, despite the
fact that entries[] and ignored[] we allocated internally to dir.c.
That, of course, resulted in many callers either leaking or haphazardly
trying to free these arrays and their contents.
Digging further, I found that despite the pretty clear documentation
near the top of dir.h that folks were supposed to call clear_directory()
when the user no longer needed the dir_struct, there were four callers
that didn't bother doing that at all. However, two of them clearly
thought about leaks since they had an UNLEAK(dir) directive, which to me
suggests that the method to free the data was too unclear. I suspect
the non-obviousness of the API and its holes led folks to avoid it,
which then snowballed into further problems with the entries[],
ignored[], parent_hashmap, and recursive_hashmap problems.
Rename clear_directory() to dir_clear() to be more in line with other
data structures in git, and introduce a dir_init() to handle the
suggested memsetting of dir_struct to all zeroes. I hope that a name
like "dir_clear()" is more clear, and that the presence of dir_init()
will provide a hint to those looking at the code that they need to look
for either a dir_clear() or a dir_free() and lead them to find
dir_clear().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The calling convention for the dir API is supposed to end with a call to
clear_directory() to free up no longer needed memory. However,
clear_directory() didn't free dir->entries or dir->ignored. I believe
this was an oversight, but a number of callers noticed memory leaks and
started free'ing these. Unfortunately, they did so somewhat haphazardly
(sometimes freeing the entries in the arrays, and sometimes only
free'ing the arrays themselves). This suggests the callers weren't
trying to make sure any possible memory used might be free'd, but just
the memory they noticed their usecase definitely had allocated.
Fix this mess by moving all the duplicated free'ing logic into
clear_directory(). End by resetting dir to a pristine state so it could
be reused if desired.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The directory traversal code had redundant recursive calls which
made its performance characteristics exponential with respect to
the depth of the tree, which was corrected.
* en/fill-directory-exponential:
completion: fix 'git add' on paths under an untracked directory
Fix error-prone fill_directory() API; make it only return matches
dir: replace double pathspec matching with single in treat_directory()
dir: include DIR_KEEP_UNTRACKED_CONTENTS handling in treat_directory()
dir: replace exponential algorithm with a linear one
dir: refactor treat_directory to clarify control flow
dir: fix confusion based on variable tense
dir: fix broken comment
dir: consolidate treat_path() and treat_one_path()
dir: fix simple typo in comment
t3000: add more testcases testing a variety of ls-files issues
t7063: more thorough status checking
|
|
Allowing the user to split a patch hunk while "git stash -p" does
not work well; a band-aid has been added to make this (partially)
work better.
* js/stash-p-fix:
stash -p: (partially) fix bug concerning split hunks
t3904: fix incorrect demonstration of a bug
|
|
When trying to stash part of the worktree changes by splitting a hunk
and then only partially accepting the split bits and pieces, the user
is presented with a rather cryptic error:
error: patch failed: <file>:<line>
error: test: patch does not apply
Cannot remove worktree changes
and the command would fail to stash the desired parts of the worktree
changes (even if the `stash` ref was actually updated correctly).
We even have a test case demonstrating that failure, carrying it for
four years already.
The explanation: when splitting a hunk, the changed lines are no longer
separated by more than 3 lines (which is the amount of context lines
Git's diffs use by default), but less than that. So when staging only
part of the diff hunk for stashing, the resulting diff that we want to
apply to the worktree in reverse will contain those changes to be
dropped surrounded by three context lines, but since the diff is
relative to HEAD rather than to the worktree, these context lines will
not match.
Example time. Let's assume that the file README contains these lines:
We
the
people
and the worktree added some lines so that it contains these lines
instead:
We
are
the
kind
people
and the user tries to stash the line containing "are", then the command
will internally stage this line to a temporary index file and try to
revert the diff between HEAD and that index file. The diff hunk that
`git stash` tries to revert will look somewhat like this:
@@ -1776,3 +1776,4
We
+are
the
people
It is obvious, now, that the trailing context lines overlap with the
part of the original diff hunk that the user did *not* want to stash.
Keeping in mind that context lines in diffs serve the primary purpose of
finding the exact location when the diff does not apply precisely (but
when the exact line number in the file to be patched differs from the
line number indicated in the diff), we work around this by reducing the
amount of context lines: the diff was just generated.
Note: this is not a *full* fix for the issue. Just as demonstrated in
t3701's 'add -p works with pathological context lines' test case, there
are ambiguities in the diff format. It is very rare in practice, of
course, to encounter such repeated lines.
The full solution for such cases would be to replace the approach of
generating a diff from the stash and then applying it in reverse by
emulating `git revert` (i.e. doing a 3-way merge). However, in `git
stash -p` it would not apply to `HEAD` but instead to the worktree,
which makes this non-trivial to implement as long as we also maintain a
scripted version of `add -i`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, the expected calling convention for the dir.c API was:
fill_directory(&dir, ..., pathspec)
foreach entry in dir->entries:
if (dir_path_match(entry, pathspec))
process_or_display(entry)
This may have made sense once upon a time, because the fill_directory() call
could use cheap checks to avoid doing full pathspec matching, and an external
caller may have wanted to do other post-processing of the results anyway.
However:
* this structure makes it easy for users of the API to get it wrong
* this structure actually makes it harder to understand
fill_directory() and the functions it uses internally. It has
tripped me up several times while trying to fix bugs and
restructure things.
* relying on post-filtering was already found to produce wrong
results; pathspec matching had to be added internally for multiple
cases in order to get the right results (see commits 404ebceda01c
(dir: also check directories for matching pathspecs, 2019-09-17)
and 89a1f4aaf765 (dir: if our pathspec might match files under a
dir, recurse into it, 2019-09-17))
* it's bad for performance: fill_directory() already has to do lots
of checks and knows the subset of cases where it still needs to do
more checks. Forcing external callers to do full pathspec
matching means they must re-check _every_ path.
So, add the pathspec matching within the fill_directory() internals, and
remove it from external callers.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash" has kept an escape hatch to use the scripted version
for a few releases, which got stale. It has been removed.
* tg/retire-scripted-stash:
stash: remove the stash.useBuiltin setting
stash: get git_stash_config at the top level
|
|
"git rm" and "git stash" learns the new "--pathspec-from-file"
option.
* am/pathspec-f-f-more:
stash push: support the --pathspec-from-file option
stash: eliminate crude option parsing
doc: stash: synchronize <pathspec> description
doc: stash: document more options
doc: stash: split options from description (2)
doc: stash: split options from description (1)
rm: support the --pathspec-from-file option
doc: rm: synchronize <pathspec> description
|
|
Remove the stash.useBuiltin setting which was added as an escape hatch
to disable the builtin version of stash first released with Git 2.22.
Carrying the legacy version is a maintenance burden, and has in fact
become out of date failing a test since the 2.23 release, without
anyone noticing until now. So users would be getting a hint to fall
back to a potentially buggy version of the tool.
We used to shell out to git config to get the useBuiltin configuration
to avoid changing any global state before spawning legacy-stash.
However that is no longer necessary, so just use the 'git_config'
function to get the setting instead.
Similar to what we've done in d03ebd411c ("rebase: remove the
rebase.useBuiltin setting", 2019-03-18), where we remove the
corresponding setting for rebase, we leave the documentation in place,
so people can refer back to it when searching for it online, and so we
can refer to it in the commit message.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next commit we're adding another config variable to be read
from 'git_stash_config', that is valid for the top level command
instead of just a subset. Move the 'git_config' invocation for
'git_stash_config' to the top-level to prepare for that.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `-`. Such use case is not
really expected.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eliminate crude option parsing and rely on real parsing instead, because
1) Crude parsing is crude, for example it's not capable of
handling things like `git stash -m Message`
2) Adding options in two places is inconvenient and prone to bugs
As a side result, the case of `git stash -m Message` gets fixed.
Also give a good error message instead of just throwing usage at user.
----
Some review of what's been happening to this code:
Before [1], `git-stash.sh` only verified that all args begin with `-` :
# The default command is "push" if nothing but options are given
seen_non_option=
for opt
do
case "$opt" in
--) break ;;
-*) ;;
*) seen_non_option=t; break ;;
esac
done
Later, [1] introduced the duplicate code I'm now removing, also making
the previous test more strict by white-listing options.
----
[1] Commit 40af1468 ("stash: convert `stash--helper.c` into `stash.c`" 2019-02-26)
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The effort to move "git-add--interactive" to C continues.
* js/patch-mode-in-others-in-c:
commit --interactive: make it work with the built-in `add -i`
built-in add -p: implement the "worktree" patch modes
built-in add -p: implement the "checkout" patch modes
built-in stash: use the built-in `git add -p` if so configured
legacy stash -p: respect the add.interactive.usebuiltin setting
built-in add -p: implement the "stash" and "reset" patch modes
built-in add -p: prepare for patch modes other than "stage"
|
|
The scripted version of `git stash` called directly into the Perl script
`git-add--interactive.perl`, and this was faithfully converted to C.
However, we have a much better way to do this now: call the internal API
directly, which will now incidentally also respect the
`add.interactive.useBuiltin` setting. Let's just do this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent update to "git stash pop" made the command empty the index
when run with the "--quiet" option, which has been corrected.
* tg/stash-refresh-index:
stash: make sure we have a valid index before writing it
|
|
In 'do_apply_stash()' we refresh the index in the end. Since
34933d0eff ("stash: make sure to write refreshed cache", 2019-09-11),
we also write that refreshed index when --quiet is given to 'git stash
apply'.
However if '--index' is not given to 'git stash apply', we also
discard the index in the else clause just before. We need to do so
because we use an external 'git update-index --add --stdin', which
leads to an out of date in-core index.
Later we call 'refresh_and_write_cache', which now leads to writing
the discarded index, which means we essentially write an empty index
file. This is obviously not correct, or the behaviour the user
wanted. We should not modify the users index without being asked to
do so.
Make sure to re-read the index after discarding the current in-core
index, to avoid dealing with outdated information. Instead we could
also drop the 'discard_cache()' + 'read_cache()', however that would
make it easy to fall into the same trap as 34933d0eff did, so it's
better to avoid that.
We can also drop the 'refresh_and_write_cache' completely in the quiet
case. Previously in legacy stash we relied on 'git status' to refresh
the index after calling 'git read-tree' when '--index' was passed to
'git apply'. However the 'reset_tree()' call that replaced 'git
read-tree' always passes options that are equivalent to '-m', making
the refresh of the index unnecessary.
Reported-by: Grzegorz Rajchman <rayman17@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
|
|
When calling `git stash` while changes were staged for files that are
marked with the `skip-worktree` bit (e.g. files that are excluded in a
sparse checkout), the files are recorded as _deleted_ instead.
The reason is that `git stash` tries to construct the tree reflecting
the worktree essentially by copying the index to a temporary one and
then updating the files from the worktree. Crucially, it calls `git
diff-index` to update also those files that are in the HEAD but have
been unstaged in the index.
However, when the temporary index is updated via `git update-index --add
--remove`, skip-worktree entries mark the files as deleted by mistake.
Let's use the newly-introduced `--ignore-skip-worktree-entries` option
of `git update-index` to prevent exactly this from happening.
Note that the regression test case deliberately avoids replicating the
scenario described above and instead tries to recreate just the symptom.
Reported by Dan Thompson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash save" lost local changes to submodules, which has been
corrected.
* jj/stash-reset-only-toplevel:
stash: avoid recursive hard reset on submodules
|
|
The merge-recursive machiery is one of the most complex parts of
the system that accumulated cruft over time. This large series
cleans up the implementation quite a bit.
* en/merge-recursive-cleanup: (26 commits)
merge-recursive: fix the fix to the diff3 common ancestor label
merge-recursive: fix the diff3 common ancestor label for virtual commits
merge-recursive: alphabetize include list
merge-recursive: add sanity checks for relevant merge_options
merge-recursive: rename MERGE_RECURSIVE_* to MERGE_VARIANT_*
merge-recursive: split internal fields into a separate struct
merge-recursive: avoid losing output and leaking memory holding that output
merge-recursive: comment and reorder the merge_options fields
merge-recursive: consolidate unnecessary fields in merge_options
merge-recursive: move some definitions around to clean up the header
merge-recursive: rename merge_options argument to opt in header
merge-recursive: rename 'mrtree' to 'result_tree', for clarity
merge-recursive: use common name for ancestors/common/base_list
merge-recursive: fix some overly long lines
cache-tree: share code between functions writing an index as a tree
merge-recursive: don't force external callers to do our logging
merge-recursive: remove useless parameter in merge_trees()
merge-recursive: exit early if index != head
Ensure index matches head before invoking merge machinery, round N
merge-recursive: remove another implicit dependency on the_repository
...
|
|
git stash push does not recursively stash submodules, but if
submodule.recurse is set, it may recursively reset --hard them. Having
only the destructive action recurse is likely to be surprising
behaviour, and unlikely to be desirable, so the easiest fix should be to
ensure that the call to git reset --hard never recurses into submodules.
This matches the behavior of check_changes_tracked_files, which ignores
submodules.
Signed-off-by: Jakob Jarmar <jakob@jarmar.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash apply" in a subdirectory of a secondary worktree failed
to access the worktree correctly, which has been corrected.
* js/stash-apply-in-secondary-worktree:
stash apply: report status correctly even in a worktree's subdirectory
|
|
When Git wants to spawn a child Git process inside a worktree's
subdirectory while `GIT_DIR` is set, we need to take care of specifying
the work tree's top-level directory explicitly because it cannot be
discovered: the current directory is _not_ the top-level directory of
the work tree, and neither is it inside the parent directory of
`GIT_DIR`.
This fixes the problem where `git stash apply` would report pretty much
everything deleted or untracked when run inside a worktree's
subdirectory.
To make sure that we do not introduce the "reverse problem", i.e. when
`GIT_WORK_TREE` is defined but `GIT_DIR` is not, we simply make sure
that both are set.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When converting stash into C, calls to 'git update-index --refresh'
were replaced with the 'refresh_cache()' function. That is fine as
long as the index is only needed in-core, and not re-read from disk.
However in many cases we do actually need the refreshed index to be
written to disk, for example 'merge_recursive_generic()' discards the
in-core index before re-reading it from disk, and in the case of 'apply
--quiet', the 'refresh_cache()' we currently have is pointless without
writing the index to disk.
Always write the index after refreshing it to ensure there are no
regressions in this compared to the scripted stash. In the future we
can consider avoiding the write where possible after making sure none
of the subsequent calls actually need the refreshed cache, and it is
not expected to be refreshed after stash exits or it is written
somewhere else already.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the bug that just won't die; there always seems to be another
form of it somewhere. See the commit message of 55f39cf7551b ("merge:
fix misleading pre-merge check documentation", 2018-06-30) for a more
detailed explanation), but in short:
<quick summary>
builtin/merge.c contains this important requirement for merge
strategies:
...the index must be in sync with the head commit. The strategies are
responsible to ensure this.
This condition is important to enforce because there are two likely
failure cases when the index isn't in sync with the head commit:
* we silently throw away changes the user had staged before the merge
* we accidentally (and silently) include changes in the merge that
were not part of either of the branches/trees being merged
Discarding users' work and mis-merging are both bad outcomes, especially
when done silently, so naturally this rule was stated sternly -- but,
unfortunately totally ignored in practice unless and until actual bugs
were found. But, fear not: the bugs from this were fixed in commit
ee6566e8d70d ("[PATCH] Rewrite read-tree", 2005-09-05)
through a rewrite of read-tree (again, commit 55f39cf7551b has a more
detailed explanation of how this affected merge). And it was fixed
again in commit
160252f81626 ("git-merge-ours: make sure our index matches HEAD", 2005-11-03)
...and it was fixed again in commit
3ec62ad9ffba ("merge-octopus: abort if index does not match HEAD", 2016-04-09)
...and again in commit
65170c07d466 ("merge-recursive: avoid incorporating uncommitted changes in a merge", 2017-12-21)
...and again in commit
eddd1a411d93 ("merge-recursive: enforce rule that index matches head before merging", 2018-06-30)
...with multiple testcases added to the testsuite that could be
enumerated in even more commits.
Then, finally, in a patch in the same series as the last fix above, the
documentation about this requirement was fixed in commit 55f39cf7551b
("merge: fix misleading pre-merge check documentation", 2018-06-30), and
we all lived happily ever after...
</quick summary>
Unfortunately, "ever after" apparently denotes a limited time and it
expired today. The merge-recursive rule to enforce that index matches
head was at the beginning of merge_trees() and would only trigger when
opt->call_depth was 0. Since merge_recursive() doesn't call
merge_trees() until after returning from recursing, this meant that the
check wasn't triggered by merge_recursive() until it had first finished
all the intermediate merges to create virtual merge bases. That is a
potentially HUGE amount of computation (and writing of intermediate
merge results into the .git/objects directory) before it errors out and
says, in effect, "Sorry, I can't do any merging because you have some
local changes that would be overwritten."
Trying to enforce that all of merge_trees(), merge_recursive(), and
merge_recursive_generic() checked the index == head condition earlier
resulted in a bunch of broken tests. It turns out that
merge_recursive() has code to drop and reload the cache while recursing
to create intermediate virtual merge bases, but unfortunately that code
runs even when no recursion is necessary. This unconditional dropping
and reloading of the cache masked a few bugs:
* builtin/merge-recursive.c: didn't even bother loading the index.
* builtin/stash.c: feels like a fake 'builtin' because it repeatedly
invokes git subprocesses all over the place, mixed with other
operations. In particular, invoking "git reset" will reset the
index on disk, but the parent process that invoked it won't
automatically have its in-memory index updated.
* t3030-merge-recursive.h: this test has always been broken in that it
didn't make sure to make index match head before running. But, it
didn't care about the index or even the merge result, just the
verbose output while running. While commit eddd1a411d93
("merge-recursive: enforce rule that index matches head before
merging", 2018-06-30) should have uncovered this broken test, it
used a test_must_fail wrapper around the merge-recursive call
because it was known that the merge resulted in a rename/rename
conflict. Thus, that fix only made this test fail for a different
reason, and since the index == head check didn't happen until after
coming all the way back out of the recursion, the testcase had
enough information to pass the one check that it did perform.
So, load the index in builtin/merge-recursive.c, reload the in-memory
index in builtin/stash.c, and modify the t3030 testcase to correctly
setup the index and make sure that the test fails in the expected way
(meaning it reports a rename/rename conflict). This makes sure that
all callers actually make the index match head. The next commit will
then enforce the condition that index matches head earlier so this
problem doesn't return in the future.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash --keep-index" did not work correctly on paths that have
been removed, which has been fixed.
* tg/stash-keep-index-with-removed-paths:
stash: fix handling removed files with --keep-index
|
|
git stash push --keep-index is supposed to keep all changes that have
been added to the index, both in the index and on disk.
Currently this doesn't behave correctly when a file is removed from
the index. Instead of keeping it deleted on disk, --keep-index
currently restores the file.
Fix that behaviour by using 'git checkout' in no-overlay mode which
can faithfully restore the index and working tree. This also
simplifies the code.
Note that this will overwrite untracked files if the untracked file
has the same name as a file that has been deleted in the index.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the conversion of 'stash show' to C in dc7bd382b1 ("stash: convert
show to builtin", 2019-02-25), 'git stash show <n>', where n is the
index of a stash got broken, if n is not a file or a valid revision by
itself.
'stash show' accepts any flag 'git diff' accepts for changing the
output format. Internally we use 'setup_revisions()' to parse these
command line flags. Currently we pass the whole argv through to
'setup_revisions()', which includes the stash index.
As the stash index is not a valid revision or a file in the working
tree in most cases however, this 'setup_revisions()' call (and thus
the whole command) ends up failing if we use this form of 'git stash
show'.
Instead of passing the whole argv to 'setup_revisions()', only pass
the flags (and the command name) through, while excluding the stash
reference. The stash reference is parsed (and validated) in
'get_stash_info()' already.
This separate parsing also means that we currently do produce the
correct output if the command succeeds.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
|
|
A regression fix.
* tg/stash-in-c-show-default-to-p-fix:
stash: setup default diff output format if necessary
|
|
Further fixes to "git stash" reimplemented in C.
* js/stash-in-c-pathspec-fix:
stash: pass pathspec as pointer
built-in stash: handle :(glob) pathspecs again
legacy stash: fix "rudimentary backport of -q"
|
|
Code clean-up.
* tb/stash-in-c-unused-param-fix:
stash: drop unused parameter
|
|
"git stash" rewritten in C.
* ps/stash-in-c: (28 commits)
tests: add a special setup where stash.useBuiltin is off
stash: optionally use the scripted version again
stash: add back the original, scripted `git stash`
stash: convert `stash--helper.c` into `stash.c`
stash: replace all `write-tree` child processes with API calls
stash: optimize `get_untracked_files()` and `check_changes()`
stash: convert save to builtin
stash: make push -q quiet
stash: convert push to builtin
stash: convert create to builtin
stash: convert store to builtin
stash: convert show to builtin
stash: convert list to builtin
stash: convert pop to builtin
stash: convert branch to builtin
stash: convert drop and clear to builtin
stash: convert apply to builtin
stash: mention options in `show` synopsis
stash: add tests for `git stash show` config
stash: rename test cases to be more descriptive
...
|
|
In the scripted 'git stash show' when no arguments are passed, we just
pass '--stat' to 'git diff'. When any argument is passed to 'stash
show', we no longer pass '--stat' to 'git diff', and pass whatever
flags are passed directly through to 'git diff'.
By default 'git diff' shows the patch output. So when a user uses
'git stash show --patience', they would be shown the diff as expected,
using the patience algorithm. '--patience' in this case only changes
the diff algorithm, but does not cause 'git diff' to show the diff by
itself. The diff is shown because that's the default behaviour of
'git diff'.
In the C version of 'git stash show', we try to emulate that behaviour
using the internal diff API. However we forgot to set up the default
output format, in case it wasn't set by any of the flags that were
passed through. So 'git stash show --patience' in the builtin version
of stash would be completely silent, while it would show the diff in
the scripted version.
The same thing would happen for other flags that only affect the way a
patch is displayed, rather than switching to a different output format
than the default one.
Fix this by setting up the default output format for 'git diff'.
Reported-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Passing the pathspec by value is potentially confusing, as the copy is
only a shallow copy, so save the overhead of the copy, and pass the
pathspec struct as a pointer.
In addition use copy_pathspec to copy the pathspec into
rev.prune_data, so the copy is a proper deep copy, and owned by the
revision API, as that's what the API expects.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop the unused prefix parameter in do_drop_stash.
We also have an unused "prefix" parameter in the 'create_stash'
function, however we leave that in place for symmetry with the other
top-level functions.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When passing a list of pathspecs to, say, `git add`, we need to be
careful to use the original form, not the parsed form of the pathspecs.
This makes a difference e.g. when calling
git stash -- ':(glob)**/*.txt'
where the original form includes the `:(glob)` prefix while the parsed
form does not.
However, in the built-in `git stash`, we passed the parsed (i.e.
incorrect) form, and `git add` would fail with the error message:
fatal: pathspec '**/*.txt' did not match any files
at the stage where `git stash` drops the changes from the worktree, even
if `refs/stash` has been actually updated successfully.
This fixes https://github.com/git-for-windows/git/issues/2037
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a GIT_TEST_STASH_USE_BUILTIN=false test mode which is equivalent
to running with stash.useBuiltin=false. This is needed to spot that
we're not introducing any regressions in the legacy stash version
while we're carrying both it and the new built-in version.
This imitates the equivalent treatment for the built-in rebase in
62c23938fae5 (tests: add a special setup where rebase.useBuiltin is off,
2018-11-14).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently converted the `git stash` command from Unix shell scripts
to builtins.
Let's end users a way out when they discover a bug in the
builtin command: `stash.useBuiltin`.
As the file name `git-stash` is already in use, let's rename the
scripted backend to `git-legacy-stash`.
To make the test suite pass with `stash.useBuiltin=false`, this commit
also backports rudimentary support for `-q` (but only *just* enough
to appease the test suite), and adds a super-ugly hack to force exit
code 129 for `git stash -h`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old shell script `git-stash.sh` was removed and replaced
entirely by `builtin/stash.c`. In order to do that, `create` and
`push` were adapted to work without `stash.sh`. For example, before
this commit, `git stash create` called `git stash--helper create
--message "$*"`. If it called `git stash--helper create "$@"`, then
some of these changes wouldn't have been necessary.
This commit also removes the word `helper` since now stash is
called directly and not by a shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jonathan Tan
Elijah Newren
Jeff King
Johannes Schindelin
Thomas Gummerer
Alexandr Miloslavskiy
Jakob Jarmar
Paul-Sebastian Ungureanu