summaryrefslogtreecommitdiff
path: root/builtin/show-ref.c
AgeCommit message (Collapse)AuthorFilesLines
2021-01-21refs: switch peel_ref() to peel_iterated_oid()Libravatar Jeff King1-1/+1
The peel_ref() interface is confusing and error-prone: - it's typically used by ref iteration callbacks that have both a refname and oid. But since they pass only the refname, we may load the ref value from the filesystem again. This is inefficient, but also means we are open to a race if somebody simultaneously updates the ref. E.g., this: int some_ref_cb(const char *refname, const struct object_id *oid, ...) { if (!peel_ref(refname, &peeled)) printf("%s peels to %s", oid_to_hex(oid), oid_to_hex(&peeled); } could print nonsense. It is correct to say "refname peels to..." (you may see the "before" value or the "after" value, either of which is consistent), but mentioning both oids may be mixing before/after values. Worse, whether this is possible depends on whether the optimization to read from the current iterator value kicks in. So it is actually not possible with: for_each_ref(some_ref_cb); but it _is_ possible with: head_ref(some_ref_cb); which does not use the iterator mechanism (though in practice, HEAD should never peel to anything, so this may not be triggerable). - it must take a fully-qualified refname for the read_ref_full() code path to work. Yet we routinely pass it partial refnames from callbacks to for_each_tag_ref(), etc. This happens to work when iterating because there we do not call read_ref_full() at all, and only use the passed refname to check if it is the same as the iterator. But the requirements for the function parameters are quite unclear. Instead of taking a refname, let's instead take an oid. That fixes both problems. It's a little funny for a "ref" function not to involve refs at all. The key thing is that it's optimizing under the hood based on having access to the ref iterator. So let's change the name to make it clear why you'd want this function versus just peel_object(). There are two other directions I considered but rejected: - we could pass the peel information into the each_ref_fn callback. However, we don't know if the caller actually wants it or not. For packed-refs, providing it is essentially free. But for loose refs, we actually have to peel the object, which would be wasteful in most cases. We could likewise pass in a flag to the callback indicating whether the peeled information is known, but that complicates those callbacks, as they then have to decide whether to manually peel themselves. Plus it requires changing the interface of every callback, whether they care about peeling or not, and there are many of them. - we could make a function to return the peeled value of the current iterated ref (computing it if necessary), and BUG() otherwise. I.e.: int peel_current_iterated_ref(struct object_id *out); Each of the current callers is an each_ref_fn callback, so they'd mostly be happy. But: - we use those callbacks with functions like head_ref(), which do not use the iteration code. So we'd need to handle the fallback case there, anyway. - it's possible that a caller would want to call into generic code that sometimes is used during iteration and sometimes not. This encapsulates the logic to do the fast thing when possible, and fallback when necessary. The implementation is mostly obvious, but I want to call out a few things in the patch: - the test-tool coverage for peel_ref() is now meaningless, as it all collapses to a single peel_object() call (arguably they were pretty uninteresting before; the tricky part of that function is the fast-path we see during iteration, but these calls didn't trigger that). I've just dropped it entirely, though note that some other tests relied on the tags we created; I've moved that creation to the tests where it matters. - we no longer need to take a ref_store parameter, since we'd never look up a ref now. We do still rely on a global "current iterator" variable which _could_ be kept per-ref-store. But in practice this is only useful if there are multiple recursive iterations, at which point the more appropriate solution is probably a stack of iterators. No caller used the actual ref-store parameter anyway (they all call the wrapper that passes the_repository). - the original only kicked in the optimization when the "refname" pointer matched (i.e., not string comparison). We do likewise with the "oid" parameter here, but fall back to doing an actual oideq() call. This in theory lets us kick in the optimization more often, though in practice no current caller cares. It should never be wrong, though (peeling is a property of an object, so two refs pointing to the same object would peel identically). - the original took care not to touch the peeled out-parameter unless we found something to put in it. But no caller cares about this, and anyway, it is enforced by peel_object() itself (and even in the optimized iterator case, that's where we eventually end up). We can shorten the code and avoid an extra copy by just passing the out-parameter through the stack. Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-28Use OPT_CALLBACK and OPT_CALLBACK_FLibravatar Denton Liu1-6/+6
In the codebase, there are many options which use OPTION_CALLBACK in a plain ol' struct definition. However, we have the OPT_CALLBACK and OPT_CALLBACK_F macros which are meant to abstract these plain struct definitions away. These macros are useful as they semantically signal to developers that these are just normal callback option with nothing fancy happening. Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or OPT_CALLBACK_F where applicable. The heavy lifting was done using the following (disgusting) shell script: #!/bin/sh do_replacement () { tr '\n' '\r' | sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' | sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' | tr '\r' '\n' } for f in $(git ls-files \*.c) do do_replacement <"$f" >"$f.tmp" mv "$f.tmp" "$f" done The result was manually inspected and then reformatted to match the style of the surrounding code. Finally, using `git grep OPTION_CALLBACK \*.c`, leftover results which were not handled by the script were manually transformed. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-19Merge branch 'en/unicode-in-refnames'Libravatar Junio C Hamano1-0/+3
On a filesystem like HFS+, the names of the refs stored as filesystem entities may become different from what the end-user expects, just like files in the working tree get "renamed". Work around the mismatch by paying attention to the core.precomposeUnicode configuration. * en/unicode-in-refnames: Honor core.precomposeUnicode in more places
2019-04-26Honor core.precomposeUnicode in more placesLibravatar Elijah Newren1-0/+3
On Mac's HFS where git sets core.precomposeUnicode to true automatically by git init/clone, when a user creates a simple unicode refname (in NFC format) such as españa: $ git branch españa different commands would display the branch name differently. For example, git branch, git log --decorate, and git fast-export all used 65 73 70 61 c3 b1 61 (or "espa\xc3\xb1a") (NFC form) while show-ref would use 65 73 70 61 6e cc 83 61 (or "espan\xcc\x83a") (NFD form). A stress test for git filter-repo was tripped up by this inconsistency, though digging in I found that the problems could compound; for example, if the user ran $ git pack-refs --all and then tried to check out the branch, they would be met with: $ git checkout españa error: pathspec 'españa' did not match any file(s) known to git $ git checkout españa -- fatal: invalid reference: españa $ git branch españa * master Note that the user could run the `git branch` command first and copy and paste the `españa` portion of the output and still see the same two errors. Also, if the user added --no-prune to the pack-refs command, then they would see three branches: master, españa, and españa (those last two are NFC vs. NFD forms, even if they render the same). Further, if the user had the `españa` branch checked out before running `git pack-refs --all`, the user would be greeted with (note that I'm trimming trailing output with an ellipsis): $ git rev-parse HEAD fatal: ambiguous argument 'HEAD': unknown revision or path... $ git status On branch españa No commits yet... Or worse, if the user didn't check this stuff first, running `git commit` will create a new commit with all changes of all of history being squashed into it. In addition to pack-refs, one could also get into this state with upload-pack or anything that calls either pack-refs or upload-pack (e.g. gc or clone). Add code in a few places (pack-refs, show-ref, upload-pack) to check and honor the setting of core.precomposeUnicode to avoid these bugs. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-08convert has_sha1_file() callers to has_object_file()Libravatar Jeff King1-1/+1
The only remaining callers of has_sha1_file() actually have an object_id already. They can use the "object" variant, rather than dereferencing the hash themselves. The code changes here were completely generated by the included coccinelle patch. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-06assert NOARG/NONEG behavior of parse-options callbacksLibravatar Jeff King1-0/+1
When we define a parse-options callback, the flags we put in the option struct must match what the callback expects. For example, a callback which does not handle the "unset" parameter should only be used with PARSE_OPT_NONEG. But since the callback and the option struct are not defined next to each other, it's easy to get this wrong (as earlier patches in this series show). Fortunately, the compiler can help us here: compiling with -Wunused-parameters can show us which callbacks ignore their "unset" parameters (and likewise, ones that ignore "arg" expect to be triggered with PARSE_OPT_NOARG). But after we've inspected a callback and determined that all of its callers use the right flags, what do we do next? We'd like to silence the compiler warning, but do so in a way that will catch any wrong calls in the future. We can do that by actually checking those variables and asserting that they match our expectations. Because this is such a common pattern, we'll introduce some helper macros. The resulting messages aren't as descriptive as we could make them, but the file/line information from BUG() is enough to identify the problem (and anyway, the point is that these should never be seen). Each of the annotated callbacks in this patch triggers -Wunused-parameters, and was manually inspected to make sure all callers use the correct options (so none of these BUGs should be triggerable). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-16object-store: move object access functions to object-store.hLibravatar Stefan Beller1-0/+1
This should make these functions easier to find and cache.h less overwhelming to read. In particular, this moves: - read_object_file - oid_object_info - write_object_file As a result, most of the codebase needs to #include object-store.h. In this patch the #include is only added to files that would fail to compile otherwise. It would be better to #include wherever identifiers from the header are used. That can happen later when we have better tooling for it. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14Convert find_unique_abbrev* to struct object_idLibravatar brian m. carlson1-2/+2
Convert find_unique_abbrev and find_unique_abbrev_r to each take a pointer to struct object_id. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16refs: convert peel_ref to struct object_idLibravatar brian m. carlson1-1/+1
Convert peel_ref (and its corresponding backend) to struct object_id. This transformation was done with an update to the declaration, definition, comments, and test helper and the following semantic patch: @@ expression E1, E2; @@ - peel_ref(E1, E2.hash) + peel_ref(E1, &E2) @@ expression E1, E2; @@ - peel_ref(E1, E2->hash) + peel_ref(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16refs: convert read_ref and read_ref_full to object_idLibravatar brian m. carlson1-1/+1
All but two of the call sites already have parameters using the hash parameter of struct object_id, so convert them to take a pointer to the struct directly. Also convert refs_read_refs_full, the underlying implementation. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: remove a stale commentLibravatar Junio C Hamano1-4/+0
When cf0adba788 ("Store peeled refs in packed-refs file.", 2006-11-19) made the command to die with a message on error even when --quiet is passed, it left the comment to say it changed the semantics. But that kind of information belongs to the log message, not in-code comment. Besides, the behaviour after the change has been the established one for the past 10 years ;-) Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: remove dead `if (verify)' checkLibravatar Vladimir Panteleev1-3/+0
As show_ref() is only ever called on the path where --verify is not specified, `verify' can never possibly be true here. Signed-off-by: Vladimir Panteleev <git@thecybershadow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: detect dangling refs under --verify as wellLibravatar Vladimir Panteleev1-8/+8
Move detection of dangling refs into show_one(), so that they are detected when --verify is present as well as when it is absent. Signed-off-by: Vladimir Panteleev <git@thecybershadow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: move --quiet handling into show_one()Libravatar Vladimir Panteleev1-5/+4
Do the same with --quiet as was done with -d, to remove the need to perform this check at show_one()'s call site from the --verify branch. Signed-off-by: Vladimir Panteleev <git@thecybershadow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: allow -d to work with --verifyLibravatar Vladimir Panteleev1-11/+12
Move handling of -d into show_one(), so that it takes effect when --verify is present as well as when it is absent. This is useful when the user wishes to avoid the costly iteration of refs. Signed-off-by: Vladimir Panteleev <git@thecybershadow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: accept HEAD with --verifyLibravatar Vladimir Panteleev1-1/+1
Previously, when --verify was specified, show-ref would use a separate code path which did not handle HEAD and treated it as an invalid ref. Thus, "git show-ref --verify HEAD" (where "--verify" is used because the user is not interested in seeing refs/remotes/origin/HEAD) did not work as expected. Instead of insisting that the input begins with "refs/", allow "HEAD" as well in the codepath that handles "--verify", so that all valid full refnames including HEAD are passed to the same output machinery. Signed-off-by: Vladimir Panteleev <git@thecybershadow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-20show-ref: stop using PARSE_OPT_NO_INTERNAL_HELPLibravatar René Scharfe1-11/+1
The flag PARSE_OPT_NO_INTERNAL_HELP is set to allow overriding the option -h, except when it's the only one given. This is the default behavior now, so remove the flag and the hand-rolled --help-all handling. The internal --help-all handler now actually shows hidden options, i.e. -h in this case. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net>
2015-10-16usage: do not insist that standard input must come from a fileLibravatar Junio C Hamano1-1/+1
The synopsys text and the usage string of subcommands that read list of things from the standard input are often shown like this: git gostak [--distim] < <list-of-doshes> This is problematic in a number of ways: * The way to use these commands is more often to feed them the output from another command, not feed them from a file. * Manual pages outside Git, commands that operate on the data read from the standard input, e.g "sort", "grep", "sed", etc., are not described with such a "< redirection-from-file" in their synopsys text. Our doing so introduces inconsistency. * We do not insist on where the output should go, by saying git gostak [--distim] < <list-of-doshes> > <output> * As it is our convention to enclose placeholders inside <braket>, the redirection operator followed by a placeholder filename becomes very hard to read, both in the documentation and in the help text. Let's clean them all up, after making sure that the documentation clearly describes the modes that take information from the standard input and what kind of things are expected on the input. [jc: stole example for fmt-merge-msg from Jonathan] Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-31show-ref: place angle brackets around variables in usage stringLibravatar Alex Henrie1-1/+1
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-25show_ref(): convert local variable peeled to object_idLibravatar Michael Haggerty1-3/+3
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-25builtin/show-ref: rewrite to use object_idLibravatar Michael Haggerty1-18/+15
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-25each_ref_fn: change to take an object_id parameterLibravatar Michael Haggerty1-3/+8
Change typedef each_ref_fn to take a "const struct object_id *oid" parameter instead of "const unsigned char *sha1". To aid this transition, implement an adapter that can be used to wrap old-style functions matching the old typedef, which is now called "each_ref_sha1_fn"), and make such functions callable via the new interface. This requires the old function and its cb_data to be wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be used as the cb_data for an adapter function, each_ref_fn_adapter(). This is an enormous diff, but most of it consists of simple, mechanical changes to the sites that call any of the "for_each_ref" family of functions. Subsequent to this change, the call sites can be rewritten one by one to use the new interface. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-14standardize usage info string formatLibravatar Alex Henrie1-1/+1
This patch puts the usage info strings that were not already in docopt- like format into docopt-like format, which will be a litle easier for end users and a lot easier for translators. Changes include: - Placing angle brackets around fill-in-the-blank parameters - Putting dashes in multiword parameter names - Adding spaces to [-f|--foobar] to make [-f | --foobar] - Replacing <foobar>* with [<foobar>...] Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05replace {pre,suf}fixcmp() with {starts,ends}_with()Libravatar Christian Couder1-3/+3
Leaving only the function definitions and declarations so that any new topic in flight can still make use of the old functions, replace existing uses of the prefixcmp() and suffixcmp() with new API functions. The change can be recreated by mechanically applying this: $ git grep -l -e prefixcmp -e suffixcmp -- \*.c | grep -v strbuf\\.c | xargs perl -pi -e ' s|!prefixcmp\(|starts_with\(|g; s|prefixcmp\(|!starts_with\(|g; s|!suffixcmp\(|ends_with\(|g; s|suffixcmp\(|!ends_with\(|g; ' on the result of preparatory changes in this series. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-05Replace deprecated OPT_BOOLEAN by OPT_BOOLLibravatar Stefan Beller1-5/+5
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN, 2011-09-27). All occurrences of the respective variables have been reviewed and none of them relied on the counting up mechanism, but all of them were using the variable as a true boolean. This patch does not change semantics of any command intentionally. Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-05Remove deprecated OPTION_BOOLEAN for parsing argumentsLibravatar Stefan Beller1-3/+2
As of b04ba2bb4 OPTION_BOOLEAN was deprecated. This commit removes all occurrences of OPTION_BOOLEAN. In b04ba2bb4 Junio suggested to replace it with either OPTION_SET_INT or OPTION_COUNTUP instead. However a pattern, which occurred often with the OPTION_BOOLEAN was a hidden boolean parameter. So I defined OPT_HIDDEN_BOOL as an additional possible parse option in parse-options.h to make life easy. The OPT_HIDDEN_BOOL was used in checkout, clone, commit, show-ref. The only exception, where there was need to fiddle with OPTION_SET_INT was log and notes. However in these two files there is also a pattern, so we could think of introducing OPT_NONEG_BOOL. Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-22Merge branch 'db/show-ref-head'Libravatar Junio C Hamano1-2/+6
The "--head" option to "git show-ref" was only to add "HEAD" to the list of candidate refs to be filtered by the usual rules (e.g. "--heads" that only show refs under refs/heads). Change the meaning of the option to always show "HEAD" regardless of what filtering will be applied to any other ref (this is a backward incompatible change, so I may need to add an entry to the Release Notes). * db/show-ref-head: show-ref: make --head always show the HEAD ref
2013-07-17show-ref: make --head always show the HEAD refLibravatar Doug Bell1-2/+6
The docs seem to say that doing git show-ref --head --tags would show both the HEAD ref and all the tag refs. However, doing both --head and either of --tags or --heads would filter out the HEAD ref. Also update the documentation to describe the new behavior and add tests for the show-ref command. [jc: Doug did proofread the tests, but it was done by me and bugs in it are mine]. Signed-off-by: Doug Bell <madcityzen@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-02exclude_existing(): set existing_refs.strdup_stringsLibravatar Michael Haggerty1-1/+1
The each_ref_fn add_existing() adds refnames to the existing_refs list. But the lifetimes of these refnames is not guaranteed by the refs API, so configure the string_list to make copies as it adds them. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-25Merge branch 'jk/peel-ref'Libravatar Jeff King1-20/+3
Speeds up "git upload-pack" (what is invoked by "git fetch" on the other side of the connection) by reducing the cost to advertise the branches and tags that are available in the repository. * jk/peel-ref: upload-pack: use peel_ref for ref advertisements peel_ref: check object type before loading peel_ref: do not return a null sha1 peel_ref: use faster deref_tag_noverify
2012-10-04peel_ref: do not return a null sha1Libravatar Jeff King1-20/+3
The idea of the peel_ref function is to dereference tag objects recursively until we hit a non-tag, and return the sha1. Conceptually, it should return 0 if it is successful (and fill in the sha1), or -1 if there was nothing to peel. However, the current behavior is much more confusing. For a regular loose ref, the behavior is as described above. But there is an optimization to reuse the peeled-ref value for a ref that came from a packed-refs file. If we have such a ref, we return its peeled value, even if that peeled value is null (indicating that we know the ref definitely does _not_ peel). It might seem like such information is useful to the caller, who would then know not to bother loading and trying to peel the object. Except that they should not bother loading and trying to peel the object _anyway_, because that fallback is already handled by peel_ref. In other words, the whole point of calling this function is that it handles those details internally, and you either get a sha1, or you know that it is not peel-able. This patch catches the null sha1 case internally and converts it into a -1 return value (i.e., there is nothing to peel). This simplifies callers, which do not need to bother checking themselves. Two callers are worth noting: - in pack-objects, a comment indicates that there is a difference between non-peelable tags and unannotated tags. But that is not the case (before or after this patch). Whether you get a null sha1 has to do with internal details of how peel_ref operated. - in show-ref, if peel_ref returns a failure, the caller tries to decide whether to try peeling manually based on whether the REF_ISPACKED flag is set. But this doesn't make any sense. If the flag is set, that does not necessarily mean the ref came from a packed-refs file with the "peeled" extension. But it doesn't matter, because even if it didn't, there's no point in trying to peel it ourselves, as peel_ref would already have done so. In other words, the fallback peeling is guaranteed to fail. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-22i18n: show-ref: mark parseopt strings for translationLibravatar Nguyễn Thái Ngọc Duy1-14/+14
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-13Convert many resolve_ref() calls to read_ref*() and ref_exists()Libravatar Nguyễn Thái Ngọc Duy1-1/+1
resolve_ref() may return a pointer to a static buffer, which is not safe for long-term use because if another resolve_ref() call happens, the buffer may be changed. Many call sites though do not care about this buffer. They simply check if the return value is NULL or not. Convert all these call sites to new wrappers to reduce resolve_ref() calls from 57 to 34. If we change resolve_ref() prototype later on to avoid passing static buffer out, this helps reduce changes. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Change check_ref_format() to take a flags argumentLibravatar Michael Haggerty1-1/+1
Change check_ref_format() to take a flags argument that indicates what is acceptable in the reference name (analogous to "git check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This is more convenient for callers and also fixes a failure in the test suite (and likely elsewhere in the code) by enabling "onelevel" and "refspec-pattern" to be allowed independently of each other. Also rename check_ref_format() to check_refname_format() to make it obvious that it deals with refnames rather than references themselves. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-15Describe various forms of "be quiet" using OPT__QUIETLibravatar Jonathan Nieder1-1/+2
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-15add description parameter to OPT__QUIETLibravatar René Scharfe1-1/+1
Allows better help text to be defined than "be quiet". Also make use of the macro in a place that already had a different description. No object code changes intended. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-05string_list: Add STRING_LIST_INIT macro and make use of it.Libravatar Thiago Farina1-1/+1
Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-27string_list: Fix argument order for string_list_insertLibravatar Julian Phillips1-1/+1
Update the definition and callers of string_list_insert to use the string_list as the first argument. This helps make the string_list API easier to use by being more consistent. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-22Move 'builtin-*' into a 'builtin/' subdirectoryLibravatar Linus Torvalds1-0/+249
This shrinks the top-level directory a bit, and makes it much more pleasant to use auto-completion on the thing. Instead of [torvalds@nehalem git]$ em buil<tab> Display all 180 possibilities? (y or n) [torvalds@nehalem git]$ em builtin-sh builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o [torvalds@nehalem git]$ em builtin-shor<tab> builtin-shortlog.c builtin-shortlog.o [torvalds@nehalem git]$ em builtin-shortlog.c you get [torvalds@nehalem git]$ em buil<tab> [type] builtin/ builtin.h [torvalds@nehalem git]$ em builtin [auto-completes to] [torvalds@nehalem git]$ em builtin/sh<tab> [type] shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o [torvalds@nehalem git]$ em builtin/sho [auto-completes to] [torvalds@nehalem git]$ em builtin/shor<tab> [type] shortlog.c shortlog.o [torvalds@nehalem git]$ em builtin/shortlog.c which doesn't seem all that different, but not having that annoying break in "Display all 180 possibilities?" is quite a relief. NOTE! If you do this in a clean tree (no object files etc), or using an editor that has auto-completion rules that ignores '*.o' files, you won't see that annoying 'Display all 180 possibilities?' message - it will just show the choices instead. I think bash has some cut-off around 100 choices or something. So the reason I see this is that I'm using an odd editory, and thus don't have the rules to cut down on auto-completion. But you can simulate that by using 'ls' instead, or something similar. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>