| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Only one of the callers of rev_is_head() provides two hashes to compare.
Move that check there and convert it to struct object_id.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the colored output introduced in ab07ba2a24 (show-branch: color
the commit status signs, 2009-04-22) to not color and reset each
individual space character we use for padding. The intent is to color
just the "!", "+" etc. characters.
This makes the output easier to test, so let's do that now. The test
would be much more verbose without a color/reset for each space
character. Since the coloring cycles through colors we previously had
a "rainbow of space characters".
In theory this breaks things for anyone who's relying on the exact
colored output of show-branch, in practice I'd think anyone parsing it
isn't actively turning on the colored output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
|
|
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can check if certain characters are present in a string by calling
strchr(3) on each of them, or we can pass them all to a single
strpbrk(3) call. The latter is shorter, less repetitive and slightly
more efficient, so let's do that instead.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This ref_name parameter was never used since the inception of
show_independent() in 1f8af483df (show-branch: --list and --independent,
2005-09-09). Let's drop it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running "git show-branch --no-reflog" will behave as if "--reflog" was
given with no options, which makes no sense.
In theory this option might be used to cancel an earlier "--reflog"
option, but the semantics are not clear. Let's punt on it and just
disallow the broken option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This rounds out the previous three patches, covering the
inequality logic for the "hash" variant of the functions.
As with the previous three, the accompanying code changes
are the mechanical result of applying the coccinelle patch;
see those patches for more discussion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parse-options machinery learned to refrain from enclosing
placeholder string inside a "<bra" and "ket>" pair automatically
without PARSE_OPT_LITERAL_ARGHELP. Existing help text for option
arguments that are not formatted correctly have been identified and
fixed.
* rs/parse-opt-lithelp:
parse-options: automatically infer PARSE_OPT_LITERAL_ARGHELP
shortlog: correct option help for -w
send-pack: specify --force-with-lease argument help explicitly
pack-objects: specify --index-version argument help explicitly
difftool: remove angular brackets from argument help
add, update-index: fix --chmod argument help
push: use PARSE_OPT_LITERAL_ARGHELP instead of unbalanced brackets
|
|
Parseopt wraps argument help strings in a pair of angular brackets by
default, to tell users that they need to replace it with an actual
value. This is useful in most cases, because most option arguments
are indeed single values of a certain type. The option
PARSE_OPT_LITERAL_ARGHELP needs to be used in option definitions with
arguments that have multiple parts or are literal strings.
Stop adding these angular brackets if special characters are present,
as they indicate that we don't deal with a simple placeholder. This
simplifies the code a bit and makes defining special options slightly
easier.
Remove the flag PARSE_OPT_LITERAL_ARGHELP in the cases where the new
and more cautious handling suffices.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of
lookup_commit_reference_gently to be more specific about which
repository to handle. This is a small mechanical change; it doesn't
change the implementation to handle repositories other than
the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another candidate for commit-slab. Keep Junio's observation in
code so we can search it later on when somebody wants to improve the
code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ot/pretty:
format: create docs for pretty.h
format: create pretty.h file
|
|
Create header for pretty.c to make formatting interface more structured.
This is a middle point, this file would be merged further with other
files which contain formatting stuff.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
|
|
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
|
|
This reverts commit 136c8c8b8fa39f1315713248473dececf20f8fe7.
That commit was trying to address a bug caused by 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10), in which
plumbing like diff-tree defaulted to "auto" color, but did
not respect a "color.ui" directive to disable it.
But it also meant that we started respecting "color.ui" set
to "always". This was a known problem, but 4c7f1819b3 argued
that nobody ought to be doing that. However, that turned out
to be wrong, and we got a number of bug reports related to
"add -p" regressing in v2.14.2.
Let's revert 136c8c8b8, fixing the regression to "add -p".
This leaves the problem from 4c7f1819b3 unfixed, but:
1. It's a pretty obscure problem in the first place. I
only noticed it while working on the color code, and we
haven't got a single bug report or complaint about it.
2. We can make a more moderate fix on top by respecting
"never" but not "always" for plumbing commands. This
is just the minimal fix to go back to the working state
we had before v2.14.2.
Note that this isn't a pure revert. We now have a test in
t3701 which shows off the "add -p" regression. This can be
flipped to success.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the callers and internals, including struct read_ref_at_cb, of
read_ref_at to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the callers of these functions just pass the hash member of a
struct object_id, so convert them to use a pointer to struct object_id
directly. Insert a check for NULL in expand_ref on a temporary basis;
this check can be removed when resolve_ref_unsafe is converted as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the callers already pass the hash member of struct object_id, so
update them to pass a pointer to the struct directly,
This transformation was done with an update to declaration and
definition and the following semantic patch:
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3.hash, E4)
+ resolve_refdup(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- resolve_refdup(E1, E2, E3->hash, E4)
+ resolve_refdup(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
|
|
Now that all the callers of get_sha1 directly or indirectly use struct
object_id, rename the functions starting with get_sha1 to start with
get_oid. Convert the internals in sha1_name.c to use struct object_id
as well, and eliminate explicit length checks where possible. Convert a
use of 40 in get_oid_basic to GIT_SHA1_HEXSZ.
Outside of sha1_name.c and cache.h, this transition was made with the
following semantic patch:
@@
expression E1, E2;
@@
- get_sha1(E1, E2.hash)
+ get_oid(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1(E1, E2->hash)
+ get_oid(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_committish(E1, E2.hash)
+ get_oid_committish(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_committish(E1, E2->hash)
+ get_oid_committish(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_treeish(E1, E2.hash)
+ get_oid_treeish(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_treeish(E1, E2->hash)
+ get_oid_treeish(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_commit(E1, E2.hash)
+ get_oid_commit(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_commit(E1, E2->hash)
+ get_oid_commit(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_tree(E1, E2.hash)
+ get_oid_tree(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_tree(E1, E2->hash)
+ get_oid_tree(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_blob(E1, E2.hash)
+ get_oid_blob(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_blob(E1, E2->hash)
+ get_oid_blob(E1, E2)
@@
expression E1, E2, E3, E4;
@@
- get_sha1_with_context(E1, E2, E3.hash, E4)
+ get_oid_with_context(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- get_sha1_with_context(E1, E2, E3->hash, E4)
+ get_oid_with_context(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Back in prehistoric times, our decision on whether or not to
show color by default relied on using a config callback that
either did or didn't load color config like color.diff.
When we introduced color.ui, we put it in the same boat:
commands had to manually respect it by using git_color_config()
or its git_color_default_config() convenience wrapper.
But in 4c7f1819b (make color.ui default to 'auto',
2013-06-10), that changed. Since then, we default color.ui
to auto in all programs, meaning that even plumbing commands
like "git diff-tree --pretty" might colorize the output.
Nobody seems to have complained in the intervening years,
presumably because the "is stdout a tty" check does a good
job of catching the right cases.
But that leaves an interesting curiosity: color.ui defaults
to auto even in plumbing, but you can't actually _disable_
the color via config. So if you really hate color and set
"color.ui" to false, diff-tree will still show color (but
porcelain like git-diff won't). Nobody noticed that either,
probably because very few people disable color.
One could argue that the plumbing should _always_ disable
color unless an explicit --color option is given on the
command line. But in practice, this creates a lot of
complications for scripts which do want plumbing to show
user-visible output. They can't just pass "--color" blindly;
they need to check the user's config and decide what to
send.
Given that nobody has complained about the current behavior,
let's assume it's a good path, and follow it to its
conclusion: supporting color.ui everywhere.
Note that you can create havoc by setting color.ui=always in
your config, but that's more or less already the case. We
could disallow it entirely, but it is handy for one-offs
like:
git -c color.ui=always foo >not-a-tty
when "foo" does not take a --color option itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Minor code cleanup.
* ab/wildmatch:
wildmatch: remove unused wildopts parameter
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Remove the unused wildopts placeholder struct from being passed to all
wildmatch() invocations, or rather remove all the boilerplate NULL
parameters.
This parameter was added back in commit 9b3497cab9 ("wildmatch: rename
constants and update prototype", 2013-01-01) as a placeholder for
future use. Over 4 years later nothing has made use of it, let's just
remove it. It can be added in the future if we find some reason to
start using such a parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Three instances of the same helper function have been consolidated
to one.
* pc/dir-count-slashes:
dir: create function count_slashes()
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar functions exist in apply.c and builtin/show-branch.c for
counting the number of slashes in a string. Also in the later
patches, we introduce a third caller for the same. Hence, we unify
it now by cleaning the existing functions and declaring a common
function count_slashes in dir.h and implementing it in dir.c to
remove this code duplication.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
|
|
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
|
|
We make several starts_with() calls, only to advance
pointers. This is exactly what skip_prefix() is for, which
lets us avoid manually-counted magic numbers.
Helped-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We resolve HEAD and copy the result to a fixed-size buffer
with memcpy, never checking that it actually fits. This bug
dates back to 8098a178b (Add git-symbolic-ref, 2005-09-30).
Before that we used readlink(), which took a maximum buffer
size.
We can fix this by using resolve_refdup(), which duplicates
the buffer on the heap. That also lets us just check
for a NULL pointer to see if we have resolved HEAD, and
drop the extra head_p variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We copy the result of resolving HEAD into a buffer and keep
track of its length. But we never actually use the length
for anything besides the copy. Let's stop passing it around.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Shorten the code by using QSORT instead of calling qsort(3) directly,
as the former determines the element size automatically and checks if
there are at least two elements to sort already.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark plural string for translation using Q_().
Although we already know that the plural sentence is always used in the
English source, other languages have complex plural rules they must
comply according to the value of MAX_REVS.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Spell the first word of messages in lowercase, following the usual
style.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
René Scharfe
Ævar Arnfjörð Bjarmason
Junio C Hamano
Jonathan Tan
Jeff King
Denton Liu
Nguyễn Thái Ngọc Duy
Stefan Beller
brian m. carlson
Olga Telezhnaya
Brandon Williams
Prathamesh Chavan
Johannes Schindelin
Vasco Almeida