| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick --quit" failed to remove CHERRY_PICK_HEAD even
though we won't be in a cherry-pick session after it returns, which
has been corrected.
* nd/cherry-pick-quit-fix:
cherry-pick: fix --quit not deleting CHERRY_PICK_HEAD
|
|
--quit is supposed to be --abort but without restoring HEAD. Leaving
CHERRY_PICK_HEAD behind could make other commands mistake that
cherry-pick is still ongoing (e.g. "git commit --amend" will refuse to
work). Clean it too.
For --abort, this job of deleting CHERRY_PICK_HEAD is on "git reset"
so we don't need to do anything else. But let's add extra checks in
--abort tests to confirm.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous config handling relied on global variables, called
git_default_config() even when the key had already been handled by
git_sequencer_config() and did not initialize the diff configuration
variables. Improve this by: i) loading the default values for message
cleanup and gpg signing of commits into struct replay_opts;
ii) restructuring the code to return immediately once a key is
handled; and iii) calling git_diff_basic_config(). Note that
unfortunately it is not possible to return early if the key is handled
by git_gpg_config() as it does not indicate to the caller if the key
has been handled or not.
The sequencer should probably have been calling
git_diff_basic_config() before as it creates a patch when there are
conflicts. The shell version uses 'diff-tree' to create the patch so
calling git_diff_basic_config() should match that. Although 'git
commit' calls git_diff_ui_config() I don't think the output of
print_commit_summary() is affected by anything that is loaded by that
as print_commit_summary() always turns on rename detection so would
ignore the value in the user's configuration anyway. The other values
loaded by git_diff_ui_config() are about the formatting of patches so
are not relevant to print_commit_summary().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Load default values for message cleanup and gpg signing of commits in
preparation for committing without forking 'git commit'. Note that we
interpret commit.cleanup=scissors to mean COMMIT_MSG_CLEANUP_SPACE to
be consistent with 'git commit'
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cherry-pick and revert should not accept --[no-]rerere-autoupdate once
they have started.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git revert -m 0 $merge_commit" complained that reverting a merge
needs to say relative to which parent the reversion needs to
happen, as if "-m 0" weren't given. The correct diagnosis is that
"-m 0" does not refer to the first parent ("-m 1" does). This has
been fixed.
* jk/cherry-pick-0-mainline:
cherry-pick: detect bogus arguments to --mainline
|
|
The cherry-pick and revert commands use OPT_INTEGER() to
parse --mainline. The stock parser is smart enough to reject
non-numeric nonsense, but it doesn't know that parent
counting starts at 1.
Worse, the value "0" is indistinguishable from the unset
case, so a user who assumes the counting is 0-based will get
a confusing message:
$ git cherry-pick -m 0 $merge
error: commit ... is a merge but no -m option was given.
Let's use a custom callback that enforces our range.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The subcommands are used exactly once, at the very beginning of
sequencer_pick_revisions(), to determine what to do. This is an
unnecessary level of indirection: we can simply call the correct
function to begin with. So let's do that.
While at it, ensure that the subcommands return an error code so that
they do not have to die() all over the place (bad practice for library
functions...).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sequencer is our attempt to lib-ify cherry-pick. Yet it behaves
like a one-shot command when it reads its configuration: memory is
allocated and released only when the command exits.
This is kind of okay for git-cherry-pick, which *is* a one-shot
command. All the work to make the sequencer its work horse was
done to allow using the functionality as a library function, though,
including proper clean-up after use.
To remedy that, take custody of the option values in question,
allocating and duping literal constants as needed and freeing them
at end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change is not completely faithful: instead of initializing all fields
to 0, we choose to initialize command and subcommand to -1 (instead of
defaulting to REPLAY_REVERT and REPLAY_NONE, respectively). Practically,
it makes no difference at all, but future-proofs the code to require
explicit assignments for both fields.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In exactly one callers (builtin/revert.c), we build up the
options list dynamically from multiple arrays. We do so by
manually inserting "filler" entries into one array, and then
copying the other array into the allocated space.
This is tedious and error-prone, as you have to adjust the
filler any time the second array is modified (although we do
at least check and die() when the counts do not match up).
Instead, let's just allocate a new array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"When you need to use space, use dash" is a strange way to say that
you must not use a space. Because it is more common for the command
line descriptions to use dashed-multi-words, you do not even want to
use spaces in these places. Rephrase the documentation to avoid
this strangeness.
Fix a few existing multi-word argument help strings, i.e.
- GPG key-ids given to -S/--gpg-sign are "key-id";
- Refs used for storing notes are "notes-ref"; and
- Expiry timestamps given to --expire are "expiry-date".
and update the corresponding documentation pages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick" without further options would segfault.
Could use a follow-up to handle '-' after argv[1] better.
* hu/cherry-pick-previous-branch:
cherry-pick: handle "-" after parsing options
|
|
Currently, we only try converting argv[1] from "-" into "@{-1}". This
means we do not notice "-" when used together with an option. Worse,
when "git cherry-pick" is run with no options, we segfault. Fix this
by doing the substitution after we have checked that there is
something in argv to cherry-pick and know any remaining options are
meant for the revision-listing machinery.
This still does not handle "-" after the first non-cherry-pick option.
For example,
git cherry-pick foo~2 - bar~5
and
git cherry-pick --no-merges -
will still dump usage.
Reported-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Just like "git checkout -" knows to check out and "git merge -"
knows to merge the branch you were previously on, "git cherry-pick"
now understands "git cherry-pick -" to pick from the previous
branch.
* hu/cherry-pick-previous-branch:
cherry-pick: allow "-" as abbreviation of '@{-1}'
|
|
"-" abbreviation is handy for "cherry-pick" like "checkout" and "merge".
It's also good for uniformity that a "-" stands as
the name of the previous branch where a branch name is
accepted and it could not mean any other things like stdin.
Signed-off-by: Hiroshige Umino <hiroshige88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The revert command comes with their own implementation of checking
for exclusiveness of parameters.
Now that the OPT_CMDMODE is in place, we can also rely on that macro
instead of cooking that solution for each command itself.
This commit also replaces OPT_BOOLEAN, which was deprecated by b04ba2bb
(parse-options: deprecate OPT_BOOLEAN, 2011-09-27). Instead OPT_BOOL is
used.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sentinel function attribute is not understood by versions of
the gcc compiler prior to v4.0. At present, for earlier versions
of gcc, the build issues 108 warnings related to the unknown
attribute. In order to suppress the warnings, we conditionally
define the LAST_ARG_MUST_BE_NULL macro to provide the sentinel attribute
for gcc v4.0 and newer.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This attribute can help gcc notice when callers forget to
add a NULL sentinel to the end of the function. This is our
first use of the sentinel attribute, but we shouldn't need
to #ifdef for other compilers, as __attribute__ is already a
no-op on non-gcc-compatible compilers.
Suggested-by: Bert Wesarg <bert.wesarg@googlemail.com>
More-Spots-Found-By: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The usage string for cherry-pick and revert has never been updated to
reflect their ability to handle multiple commits. Other documentation is
already correct.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
|
|
A lot of i18n mark-up for the help text from "git <cmd> -h".
* nd/i18n-parseopt-help: (66 commits)
Use imperative form in help usage to describe an action
Reduce translations by using same terminologies
i18n: write-tree: mark parseopt strings for translation
i18n: verify-tag: mark parseopt strings for translation
i18n: verify-pack: mark parseopt strings for translation
i18n: update-server-info: mark parseopt strings for translation
i18n: update-ref: mark parseopt strings for translation
i18n: update-index: mark parseopt strings for translation
i18n: tag: mark parseopt strings for translation
i18n: symbolic-ref: mark parseopt strings for translation
i18n: show-ref: mark parseopt strings for translation
i18n: show-branch: mark parseopt strings for translation
i18n: shortlog: mark parseopt strings for translation
i18n: rm: mark parseopt strings for translation
i18n: revert, cherry-pick: mark parseopt strings for translation
i18n: rev-parse: mark parseopt strings for translation
i18n: reset: mark parseopt strings for translation
i18n: rerere: mark parseopt strings for translation
i18n: status: mark parseopt strings for translation
i18n: replace: mark parseopt strings for translation
...
|
|
When giving multiple individual revisions to cherry-pick or revert, as
in 'git cherry-pick A B' or 'git revert B A', one would expect them to
be picked/reverted in the order given on the command line. They are
instead ordered by their commit timestamp -- in chronological order
for "cherry-pick" and in reverse chronological order for
"revert". This matches the order in which one would usually give them
on the command line, making this bug somewhat hard to notice. Still,
it has been reported at least once before [1].
It seems like the chronological sorting happened by accident because
the revision walker has traditionally always sorted commits in reverse
chronological order when rev_info.no_walk was enabled. In the case of
'git revert B A' where B is newer than A, this sorting is a no-op. For
'git cherry-pick A B', the sorting would reverse the arguments, but
because the sequencer also flips the rev_info.reverse flag when
picking (as opposed to reverting), the end result is a chronological
order. The rev_info.reverse flag was probably flipped so that the
revision walker emits B before C in 'git cherry-pick A..C'; that it
happened to effectively undo the unexpected sorting done when not
walking, was probably a coincidence that allowed this bug to happen at
all.
Fix the bug by telling the revision walker not to sort the commits
when not walking. The only case we want to reverse the order is now
when cherry-picking and walking revisions (rev_info.no_walk = 0).
[1] http://thread.gmane.org/gmane.comp.version-control.git/164794
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Scripts such as "git rebase -i" cannot currently cherry-pick commits
which have an empty commit message, as git cherry-pick calls git
commit without the --allow-empty-message option.
Add an --allow-empty-message option to git cherry-pick which is passed
through to git commit, so this behaviour can be overridden.
Signed-off-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" learned to optionally keep commits that do not introduce
any change in the original history.
By Neil Horman
* nh/empty-rebase:
git-rebase: add keep_empty flag
git-cherry-pick: Add test to validate new options
git-cherry-pick: Add keep-redundant-commits option
git-cherry-pick: add allow-empty option
|
|
The command line parser choked "git cherry-pick $name" when $name can be
both revision name and a pathname, even though $name can never be a path
in the context of the command.
The issue the patch addresses is real, but the way it is implemented felt
unnecessarily invasive a bit. It may be cleaner for this caller to add
the "--" to the end of the argv_array it passes to setup_revisions().
By Clemens Buchacher
* cb/cherry-pick-rev-path-confusion:
cherry-pick: do not expect file arguments
|
|
The git-cherry-pick --allow-empty command by default only preserves empty
commits that were originally empty, i.e only those commits for which
<commit>^{tree} and <commit>^^{tree} are equal. By default commits which are
non-empty, but were made empty by the inclusion of a prior commit on the current
history are filtered out. This option allows us to override that behavior and
include redundant commits as empty commits in the change history.
Note that this patch changes the default behavior of git cherry-pick slightly.
Prior to this patch all commits in a cherry-pick sequence were applied and git
commit was run. The implication here was that, if a commit was redundant, and
the commit did not trigger the fast forward logic, the git commit operation, and
therefore the git cherry-pick operation would fail, displaying the cherry pick
advice (i.e. run git commit --allow-empty). With this patch however, such
redundant commits are automatically skipped without stopping, unless
--keep-redundant-commits is specified, in which case, they are automatically
applied as empty commits.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By Christian Couder
* cc/fix-missing-va-end-in-revert:
revert: add missing va_end
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a commit-ish passed to cherry-pick or revert happens to have a file
of the same name, git complains that the argument is ambiguous and
advises to use '--'. To make things worse, the '--' argument is removed
by parse_options, und so passing '--' has no effect.
Instead, always interpret cherry-pick/revert arguments as revisions.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git cherry-pick fails when picking a non-ff commit that is empty. The advice
given with the failure is that a git-commit --allow-empty should be issued to
explicitly add the empty commit during the cherry pick. This option allows a
user to specify before hand that they want to keep the empty commit. This
eliminates the need to issue both a cherry pick and a commit operation.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expose the cherry-picking machinery through a public
sequencer_pick_revisions() (renamed from pick_revisions() in
builtin/revert.c), so that cherry-picking and reverting are special
cases of a general sequencer operation. The cherry-pick builtin is
now a thin wrapper that does command-line argument parsing before
calling into sequencer_pick_revisions(). In the future, we can write
a new "foo" builtin that calls into the sequencer like:
memset(&opts, 0, sizeof(opts));
opts.action = REPLAY_FOO;
opts.revisions = xmalloc(sizeof(*opts.revs));
parse_args_populate_opts(argc, argv, &opts);
init_revisions(opts.revs);
sequencer_pick_revisions(&opts);
This patch does not intend to make any functional changes. Check
with:
$ git blame -s -C HEAD^..HEAD -- sequencer.c | grep -C3 '^[^^]'
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
REVERT and CHERRY_PICK and are unsuitable names for an enumerator in a
public interface, because they are generic enough to be likely to
clash with identifiers with other meanings. Rename to REPLAY_REVERT
and REPLAY_PICK as preparation for exposing them.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/revert-cherry-pick:
t3502, t3510: clarify cherry-pick -m failure
t3510 (cherry-pick-sequencer): use exit status
revert: simplify getting commit subject in format_todo()
revert: tolerate extra spaces, tabs in insn sheet
revert: make commit subjects in insn sheet optional
revert: free msg in format_todo()
|
|
* nd/resolve-ref:
Rename resolve_ref() to resolve_ref_unsafe()
Convert resolve_ref+xstrdup to new resolve_refdup function
revert: convert resolve_ref() to read_ref_full()
|
|
format_todo() calls get_message(), but uses only the subject line of
the commit message. As a minor optimization, save work and
unnecessary memory allocations by using find_commit_subject() instead.
Also, remove the unnecessary check on cur->item->buffer: the
lookup_commit_reference() call in parse_insn_line() has already made
sure of this.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tolerate extra spaces and tabs as part of the the field separator in
'.git/sequencer/todo', for people with fat fingers.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the instruction sheet format subtly so that the subject of the
commit message that follows the object name is optional. As a result,
an instruction sheet like this is now perfectly valid:
pick 35b0426
pick fbd5bbcbc2e
pick 7362160f
While at it, also fix a bug introduced by 5a5d80f4 (revert: Introduce
--continue to continue the operation, 2011-08-04) that failed to read
lines that are too long to fit on the commit-id-shaped buffer we
currently use; eliminate the need for the buffer altogether. In
addition to literal SHA-1 hexes, you can now safely use expressions
like the following in the instruction sheet:
featurebranch~4
rr/revert-cherry-pick-continue^2~12@{12 days ago}
[jc: simplify parsing]
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Memory allocated to the fields of msg by get_message() isn't freed.
This is potentially a big leak, because fresh memory is allocated to
store the commit message for each commit. Fix this using
free_message().
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that "git reset" no longer implicitly removes .git/sequencer that
the operator may or may not have wanted to keep, the logic to write a
backup copy of .git/sequencer and remove it when stale is not needed
any more. Simplify the sequencer API and repository layout by
dropping it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As v1.7.8-rc0~141^2~4 (2011-08-04) explains, git cherry-pick removes
the sequencer state just before applying the final patch. In the
single-pick case, that was a good thing, since --abort and --continue
work fine without access to such state and removing it provides a
signal that git should not complain about the need to clobber it ("a
cherry-pick or revert is already in progress") in sequences like the
following:
git cherry-pick foo
git read-tree -m -u HEAD; # forget that; let's try a different one
git cherry-pick bar
After the recent patch "allow single-pick in the middle of cherry-pick
sequence" we don't need that hack any more. In the new regime, a
traditional "git cherry-pick <commit>" command never looks at
.git/sequencer, so we do not need to cripple "git cherry-pick
<commit>..<commit>" for it any more.
So now you can run "git cherry-pick --abort" near the end of a
multi-pick sequence and it will abort the entire sequence, instead of
misbehaving and aborting just the final commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After messing up a difficult conflict resolution in the middle of a
cherry-pick sequence, it can be useful to be able to
git checkout HEAD . && git cherry-pick that-one-commit
to restart the conflict resolution. The current code however errors out
saying that another cherry-pick is already in progress.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 7e2bfd3f (revert: allow cherry-picking more than one commit,
2010-07-02), the pick/revert machinery has kept track of the set of
commits to be cherry-picked or reverted using commit_argc and
commit_argv variables, storing the corresponding command-line
parameters.
Future callers as other commands are built in (am, rebase, sequencer)
may find it easier to pass rev-list options to this machinery in
already-parsed form. Teach cmd_cherry_pick and cmd_revert to parse
the rev-list arguments in advance and pass the commit set to
pick_revisions() as a rev_info structure.
Original patch by Jonathan, tweaks and test from Ram.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git cherry-pick ..bar" encounters conflicts, permit the operator
to use cherry-pick --continue after resolving them as a shortcut for
"git commit && git cherry-pick --continue" to record the resolution
and carry on with the rest of the sequence.
This improves the analogy with "git rebase" (in olden days --continue
was the way to preserve authorship when a rebase encountered
conflicts) and fits well with a general UI goal of making "git cmd
--continue" save humans the trouble of deciding what to do next.
Example: after encountering a conflict from running "git cherry-pick
foo bar baz":
CONFLICT (content): Merge conflict in main.c
error: could not apply f78a8d98c... bar!
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
We edit main.c to resolve the conflict, mark it acceptable with "git
add main.c", and can run "cherry-pick --continue" to resume the
sequence.
$ git cherry-pick --continue
[editor opens to confirm commit message]
[master 78c8a8c98] bar!
1 files changed, 1 insertions(+), 1 deletions(-)
[master 87ca8798c] baz!
1 files changed, 1 insertions(+), 1 deletions(-)
This is done for both codepaths to pick multiple commits and a single
commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Nguyễn Thái Ngọc Duy
Junio C Hamano
Phillip Wood
Brandon Williams
Jeff King
Johannes Schindelin
Alex Henrie
Nicolas Vigier
Hiroshige Umino
Stefan Beller
Ramsay Jones
Kevin Bracey
Martin von Zweigbergk
Chris Webb
Neil Horman
Christian Couder
Clemens Buchacher
Ramkumar Ramachandra
Jonathan Nieder