| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jc/advise-i18n:
i18n of multi-line advice messages
|
|
Advice messages are by definition meant for human end-users, and prime
candidates for i18n/l10n. They tend to also be more verbose to be helpful,
and need to be longer than just one line.
Although we do not have parameterized multi-line advice messages yet, once
we do, we cannot emit such a message like this:
advise(_("Please rename %s to something else"), gostak);
advise(_("so that we can avoid distimming %s unnecessarily."), doshes);
because some translations may need to have the replacement of 'gostak' on
the second line (or 'doshes' on the first line). Some languages may even
need to use three lines in order to fit the same message within a
reasonable width.
Instead, it has to be a single advise() construct, like this:
advise(_("Please rename %s to something else\n"
"so that we can avoid distimming %s unnecessarily."),
gostak, doshes);
Update the advise() function and its existing callers to
- take a format string that can be multi-line and translatable as a
whole;
- use the string and the parameters to form a localized message; and
- show each line in the result with the localization of the "hint: ".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that "git reset" no longer implicitly removes .git/sequencer that
the operator may or may not have wanted to keep, the logic to write a
backup copy of .git/sequencer and remove it when stale is not needed
any more. Simplify the sequencer API and repository layout by
dropping it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As v1.7.8-rc0~141^2~4 (2011-08-04) explains, git cherry-pick removes
the sequencer state just before applying the final patch. In the
single-pick case, that was a good thing, since --abort and --continue
work fine without access to such state and removing it provides a
signal that git should not complain about the need to clobber it ("a
cherry-pick or revert is already in progress") in sequences like the
following:
git cherry-pick foo
git read-tree -m -u HEAD; # forget that; let's try a different one
git cherry-pick bar
After the recent patch "allow single-pick in the middle of cherry-pick
sequence" we don't need that hack any more. In the new regime, a
traditional "git cherry-pick <commit>" command never looks at
.git/sequencer, so we do not need to cripple "git cherry-pick
<commit>..<commit>" for it any more.
So now you can run "git cherry-pick --abort" near the end of a
multi-pick sequence and it will abort the entire sequence, instead of
misbehaving and aborting just the final commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After messing up a difficult conflict resolution in the middle of a
cherry-pick sequence, it can be useful to be able to
git checkout HEAD . && git cherry-pick that-one-commit
to restart the conflict resolution. The current code however errors out
saying that another cherry-pick is already in progress.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 7e2bfd3f (revert: allow cherry-picking more than one commit,
2010-07-02), the pick/revert machinery has kept track of the set of
commits to be cherry-picked or reverted using commit_argc and
commit_argv variables, storing the corresponding command-line
parameters.
Future callers as other commands are built in (am, rebase, sequencer)
may find it easier to pass rev-list options to this machinery in
already-parsed form. Teach cmd_cherry_pick and cmd_revert to parse
the rev-list arguments in advance and pass the commit set to
pick_revisions() as a rev_info structure.
Original patch by Jonathan, tweaks and test from Ram.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git cherry-pick ..bar" encounters conflicts, permit the operator
to use cherry-pick --continue after resolving them as a shortcut for
"git commit && git cherry-pick --continue" to record the resolution
and carry on with the rest of the sequence.
This improves the analogy with "git rebase" (in olden days --continue
was the way to preserve authorship when a rebase encountered
conflicts) and fits well with a general UI goal of making "git cmd
--continue" save humans the trouble of deciding what to do next.
Example: after encountering a conflict from running "git cherry-pick
foo bar baz":
CONFLICT (content): Merge conflict in main.c
error: could not apply f78a8d98c... bar!
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
We edit main.c to resolve the conflict, mark it acceptable with "git
add main.c", and can run "cherry-pick --continue" to resume the
sequence.
$ git cherry-pick --continue
[editor opens to confirm commit message]
[master 78c8a8c98] bar!
1 files changed, 1 insertions(+), 1 deletions(-)
[master 87ca8798c] baz!
1 files changed, 1 insertions(+), 1 deletions(-)
This is done for both codepaths to pick multiple commits and a single
commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes pick_revisions() a little shorter and easier to read
straight through.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git cherry-pick --abort" command currently renames the
.git/sequencer directory to .git/sequencer-old instead of removing it
on success due to an accident. cherry-pick --abort is designed to
work in three steps:
1) find which commit to roll back to
2) call "git reset --merge <commit>" to move to that commit
3) remove the .git/sequencer directory
But the careless author forgot step 3 entirely. The only reason the
command worked anyway is that "git reset --merge <commit>" renames the
.git/sequencer directory as a secondary effect --- after moving to
<commit>, or so the logic goes, it is unlikely but possible that the
caller of git reset wants to continue the series of cherry-picks that
was in progress, so git renames the sequencer state to
.git/sequencer-old to be helpful while allowing the cherry-pick to be
resumed if the caller did not want to end the sequence after all.
By running "git cherry-pick --abort", the operator has clearly
indicated that she is not planning to continue cherry-picking. Remove
the (renamed) .git/sequencer directory as intended all along.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, it is not possible to rename or remove a directory that has
open files. 'revert --abort' renamed .git/sequencer when it still had
.git/sequencer/head open. Close the file as early as possible to allow
the rename operation on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes the following warning.
CC builtin/revert.o
builtin/revert.c: In function ‘write_cherry_pick_head’:
builtin/revert.c:311: warning: format not a string literal and no format arguments
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the "git cherry-pick --reset" option, which has a different
preferred spelling nowadays ("--quit"). Luckily the old --reset name
was not around long enough for anyone to get used to it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After running some ill-advised command like "git cherry-pick
HEAD..linux-next", the bewildered novice may want to return to more
familiar territory. Introduce a "git cherry-pick --abort" command
that rolls back the entire cherry-pick sequence and places the
repository back on solid ground.
Just like "git merge --abort", this internally uses "git reset
--merge", so local changes not involved in the conflict resolution are
preserved.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When conflicts are encountered while reverting a commit, it can be
handy to have the name of that commit easily available. For example,
to produce a copy of the patch to refer to while resolving conflicts:
$ git revert 2eceb2a8
error: could not revert 2eceb2a8... awesome, buggy feature
$ git show -R REVERT_HEAD >the-patch
$ edit $(git diff --name-only)
Set a REVERT_HEAD pseudoref when "git revert" does not make a commit,
for cases like this. This also makes it possible for scripts to
distinguish between a revert that encountered conflicts and other
sources of an unmerged index.
After successfully committing, resetting with "git reset", or moving
to another commit with "git checkout" or "git reset", the pseudoref is
no longer useful, so remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the spirit of v1.6.3.3~3^2 (refuse to merge during a merge,
2009-07-01), "git cherry-pick" refuses to start a new cherry-pick when
in the middle of an existing conflicted cherry-pick in the following
sequence:
1. git cherry-pick HEAD..origin
2. resolve conflicts
3. git cherry-pick HEAD..origin (instead of "git cherry-pick
--continue", by mistake)
Good. However, the error message on attempting step 3 is more
convoluted than necessary:
$ git cherry-pick HEAD..origin
error: .git/sequencer already exists.
error: A cherry-pick or revert is in progress.
hint: Use --continue to continue the operation
hint: or --quit to forget about it
fatal: cherry-pick failed
Clarify by removing the redundant first "error:" message, simplifying
the advice, and using lower-case and no full stops to be consistent
with other commands that prefix their messages with "error:", so it
becomes
error: a cherry-pick or revert is already in progress
hint: try "git cherry-pick (--continue | --quit)"
fatal: cherry-pick failed
The "fatal: cherry-pick failed" line seems unnecessary, too, but
that can be fixed some other day.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Deal completely with "cherry-pick --quit" and --continue at the
beginning of pick_revisions(), leaving the rest of the function for
the more interesting "git cherry-pick <commits>" case.
No functional change intended. The impact is just to unindent the
code a little.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option to "git cherry-pick" and "git revert" to discard the
sequencer state introduced by v1.7.8-rc0~141^2~6 (revert: Introduce
--reset to remove sequencer state, 2011-08-04) has a confusing name.
Change it now, while we still have the time.
The new name for "cherry-pick, please get out of my way, since I've
long forgotten about the sequence of commits I was cherry-picking when
you wrote that old .git/sequencer directory" is --quit. Mnemonic:
this is analagous to quiting a program the user is no longer using ---
we just want to get out of the multiple-command cherry-pick procedure
and not to reset HEAD or rewind any other old state.
The "--reset" option is kept as a synonym to minimize the impact. We
might consider dropping it for simplicity in a separate patch, though.
Adjust documentation and tests to use the newly preferred name (--quit)
instead of --reset. While at it, let's clarify the short descriptions
of these operations in "-h" output.
Before:
--reset forget the current operation
--continue continue the current operation
After:
--quit end revert or cherry-pick sequence
--continue resume revert or cherry-pick sequence
Noticed-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because git_path() calls vsnprintf(), code like
fd = open(git_path("SQUASH_MSG"), O_WRONLY | O_CREAT, 0666);
die_errno(_("Could not write to '%s'"), git_path("SQUASH_MSG"));
can end up printing an error indicator from vsnprintf() instead of
open() by mistake. Store the path we are trying to write to in a
temporary variable and pass _that_ to die_errno(), so the messages
written by git cherry-pick/revert and git merge can avoid this source
of confusion.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some of the fatal messages printed by revert and cherry-pick look ugly
like the following:
fatal: Could not open .git/sequencer/todo.: No such file or directory
The culprit here is that these callers of the die_errno() function did not
take it into account that the message string they give to it is followed
by ": <strerror>", hence the message typically should not end with the
full-stop.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/no-cherry-pick-head-after-punted:
cherry-pick: do not give irrelevant advice when cherry-pick punted
revert.c: defer writing CHERRY_PICK_HEAD till it is safe to do so
|
|
* jc/parse-options-boolean:
apply: use OPT_NOOP_NOARG
revert: use OPT_NOOP_NOARG
parseopt: add OPT_NOOP_NOARG
archive.c: use OPT_BOOL()
parse-options: deprecate OPT_BOOLEAN
Conflicts:
builtin/revert.c
|
|
In particular, gcc complains as follows:
CC tree-walk.o
tree-walk.c: In function `traverse_trees':
tree-walk.c:347: warning: 'e' might be used uninitialized in this \
function
CC builtin/revert.o
builtin/revert.c: In function `verify_opt_mutually_compatible':
builtin/revert.c:113: warning: 'opt2' might be used uninitialized in \
this function
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
js/no-cherry-pick-head-after-punted
* js/maint-no-cherry-pick-head-after-punted:
cherry-pick: do not give irrelevant advice when cherry-pick punted
revert.c: defer writing CHERRY_PICK_HEAD till it is safe to do so
Conflicts:
builtin/revert.c
|
|
If a cherry-pick did not even start because the working tree had local
changes that would overlap with the operation, we shouldn't be advising
the users to resolve conflicts nor to conclude it with "git commit".
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
do_pick_commit() writes out CHERRY_PICK_HEAD before invoking merge (either
via do_recursive_merge() or try_merge_command()) on the assumption that if
the merge fails it is due to conflict. However, if the tree is dirty, the
merge may not even start, aborting before do_pick_commit() can remove
CHERRY_PICK_HEAD.
Instead, defer writing CHERRY_PICK_HEAD till after merge has returned.
At this point we know the merge has either succeeded or failed due
to conflict. In either case, we want CHERRY_PICK_HEAD to be written
so that it may be picked up by the subsequent invocation of commit.
Note that do_recursive_merge() aborts if the merge cannot start, while
try_merge_command() returns a non-zero value other than 1.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/revert-cherry-pick-continue:
builtin/revert.c: make commit_list_append() static
revert: Propagate errors upwards from do_pick_commit
revert: Introduce --continue to continue the operation
revert: Don't implicitly stomp pending sequencer operation
revert: Remove sequencer state when no commits are pending
reset: Make reset remove the sequencer state
revert: Introduce --reset to remove sequencer state
revert: Make pick_commits functionally act on a commit list
revert: Save command-line options for continuing operation
revert: Save data for continuing after conflict resolution
revert: Don't create invalid replay_opts in parse_args
revert: Separate cmdline parsing from functional code
revert: Introduce struct to keep command-line options
revert: Eliminate global "commit" variable
revert: Rename no_replay to record_origin
revert: Don't check lone argument in get_encoding
revert: Simplify and inline add_message_to_msg
config: Introduce functions to write non-standard file
advice: Introduce error_resolve_conflict
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is nobody outside that calls into this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/plug-empty-tree-leak:
merge-recursive: take advantage of hardcoded empty tree
revert: plug memory leak in "cherry-pick root commit" codepath
|
|
The empty tree passed as common ancestor to merge_trees() when
cherry-picking a parentless commit is allocated on the heap and never
freed. Leaking such a small one-time allocation is not a very big
problem, but now that "git cherry-pick" can cherry-pick multiple
commits it can start to add up.
Avoid the leak by storing the fake tree exactly once in the BSS
section (i.e., use a static). While at it, let's add a test to make
sure cherry-picking multiple parentless commits continues to work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, revert_or_cherry_pick can fail in two ways. If it
encounters a conflict, it returns a positive number indicating the
intended exit status for the git wrapper to pass on; for all other
errors, it calls die(). The latter behavior is inconsiderate towards
callers, as it denies them the opportunity to recover from errors and
do other things.
After this patch, revert_or_cherry_pick will still return a positive
return value to indicate an exit status for conflicts as before, while
for some other errors, it will print an error message and return -1
instead of die()-ing. The cmd_revert and cmd_cherry_pick are adjusted
to handle the fatal errors by die()-ing themselves.
While the full benefits of this patch will only be seen once all the
"die" calls are replaced with calls to "error", its immediate impact
is to change some "fatal:" messages to say "error:" and to add a new
"fatal: cherry-pick failed" message at the end when the operation
fails.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new "git cherry-pick --continue" command which uses the
information in ".git/sequencer" to continue a cherry-pick that stopped
because of a conflict or other error. It works by dropping the first
instruction from .git/sequencer/todo and performing the remaining
cherry-picks listed there, with options (think "-s" and "-X") from the
initial command listed in ".git/sequencer/opts".
So now you can do:
$ git cherry-pick -Xpatience foo..bar
... description conflict in commit moo ...
$ git cherry-pick --continue
error: 'cherry-pick' is not possible because you have unmerged files.
fatal: failed to resume cherry-pick
$ echo resolved >conflictingfile
$ git add conflictingfile && git commit
$ git cherry-pick --continue; # resumes with the commit after "moo"
During the "git commit" stage, CHERRY_PICK_HEAD will aid by providing
the commit message from the conflicting "moo" commit. Note that the
cherry-pick mechanism has no control at this stage, so the user is
free to violate anything that was specified during the first
cherry-pick invocation. For example, if "-x" was specified during the
first cherry-pick invocation, the user is free to edit out the message
during commit time. Note that the "--signoff" option specified at
cherry-pick invocation time is not reflected in the commit message
provided by CHERRY_PICK_HEAD; the user must take care to add
"--signoff" during the "git commit" invocation.
Helped-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Protect the user from forgetting about a pending sequencer operation
by immediately erroring out when an existing cherry-pick or revert
operation is in progress like:
$ git cherry-pick foo
... conflict ...
$ git cherry-pick moo
error: .git/sequencer already exists
hint: A cherry-pick or revert is in progress
hint: Use --reset to forget about it
fatal: cherry-pick failed
A naive version of this would break the following established ways of
working:
$ git cherry-pick foo
... conflict ...
$ git reset --hard # I actually meant "moo" when I said "foo"
$ git cherry-pick moo
$ git cherry-pick foo
... conflict ...
$ git commit # commit the resolution
$ git cherry-pick moo # New operation
However, the previous patches "reset: Make reset remove the sequencer
state" and "revert: Remove sequencer state when no commits are
pending" make sure that this does not happen.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cherry-pick or revert is called on a list of commits, and a
conflict encountered somewhere in the middle, the data in
".git/sequencer" is required to continue the operation. However, when
a conflict is encountered in the very last commit, the user will have
to "continue" after resolving the conflict and committing just so that
the sequencer state is removed. This is how the current "rebase -i"
script works as well.
$ git cherry-pick foo..bar
... conflict encountered while picking "bar" ...
$ echo "resolved" >problematicfile
$ git add problematicfile
$ git commit
$ git cherry-pick --continue # This would be a no-op
Change this so that the sequencer state is cleared when a conflict is
encountered in the last commit. Incidentally, this patch makes sure
that some existing tests don't break when features like "--reset" and
"--continue" are implemented later in the series.
A better way to implement this feature is to get the last "git commit"
to remove the sequencer state. However, that requires tighter
coupling between "git commit" and the sequencer, a goal that can be
pursued once the sequencer is made more general.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To explicitly remove the sequencer state for a fresh cherry-pick or
revert invocation, introduce a new subcommand called "--reset" to
remove the sequencer state.
Take the opportunity to publicly expose the sequencer paths, and a
generic function called "remove_sequencer_state" that various git
programs can use to remove the sequencer state in a uniform manner;
"git reset" uses it later in this series. Introducing this public API
is also in line with our long-term goal of eventually factoring out
functions from revert.c into a generic commit sequencer.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apart from its central objective of calling into the picking
mechanism, pick_commits creates a sequencer directory, prepares a todo
list, and even acts upon the "--reset" subcommand. This makes for a
bad API since the central worry of callers is to figure out whether or
not any conflicts were encountered during the cherry picking. The
current API is like:
if (pick_commits(opts) < 0)
print "Something failed, we're not sure what"
So, change pick_commits so that it's only responsible for picking
commits in a loop and reporting any errors, leaving the rest to a new
function called pick_revisions. Consequently, the API of pick_commits
becomes much clearer:
act_on_subcommand(opts->subcommand);
todo_list = prepare_todo_list();
if (pick_commits(todo_list, opts) < 0)
print "Error encountered while picking commits"
Now, callers can easily call-in to the cherry-picking machinery by
constructing an arbitrary todo list along with some options.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the same spirit as ".git/sequencer/head" and ".git/sequencer/todo",
introduce ".git/sequencer/opts" to persist the replay_opts structure
for continuing after a conflict resolution. Use the gitconfig format
for this file so that it looks like:
[options]
signoff = true
record-origin = true
mainline = 1
strategy = recursive
strategy-option = patience
strategy-option = ours
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since v1.7.2-rc1~4^2~7 (revert: allow cherry-picking more than
one commit, 2010-06-02), a single invocation of "git cherry-pick" or
"git revert" can perform picks of several individual commits. To
implement features like "--continue" to continue the whole operation,
we will need to store some information about the state and the plan at
the beginning. Introduce a ".git/sequencer/head" file to store this
state, and ".git/sequencer/todo" file to store the plan. The head
file contains the SHA-1 of the HEAD before the start of the operation,
and the todo file contains an instruction sheet whose format is
inspired by the format of the "rebase -i" instruction sheet. As a
result, a typical todo file looks like:
pick 8537f0e submodule add: test failure when url is not configured
pick 4d68932 submodule add: allow relative repository path
pick f22a17e submodule add: clean up duplicated code
pick 59a5775 make copy_ref globally available
Since SHA-1 hex is abbreviated using an find_unique_abbrev(), it is
unambiguous. This does not guarantee that there will be no ambiguity
when more objects are added to the repository.
These two files alone are not enough to implement a "--continue" that
remembers the command-line options specified; later patches in the
series save them too.
These new files are unrelated to the existing .git/CHERRY_PICK_HEAD,
which will still be useful while committing after a conflict
resolution.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--ff" command-line option cannot be used with some other
command-line options. However, parse_args still parses these
incompatible options into a replay_opts structure for use by the rest
of the program. Although pick_commits, the current gatekeeper to the
cherry-pick machinery, checks the validity of the replay_opts
structure before before starting its operation, there will be multiple
entry points to the cherry-pick machinery in future. To futureproof
the code and catch these errors in one place, make sure that an
invalid replay_opts structure is not created by parse_args in the
first place. We still check the replay_opts structure for validity in
pick_commits, but this is an assert() now to emphasize that it's the
caller's responsibility to get it right.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, revert_or_cherry_pick sets up a default git config, parses
command-line arguments, before preparing to pick commits. This makes
for a bad API as the central worry of callers is to assert whether or
not a conflict occured while cherry picking. The current API is like:
if (revert_or_cherry_pick(argc, argv, opts) < 0)
print "Something failed, we're not sure what"
Simplify and rename revert_or_cherry_pick to pick_commits so that it
only has the responsibility of setting up the revision walker and
picking commits in a loop. Transfer the remaining work to its
callers. Now, the API is simplified as:
if (parse_args(argc, argv, opts) < 0)
print "Can't parse arguments"
if (pick_commits(opts) < 0)
print "Error encountered in picking machinery"
Later in the series, pick_commits will also serve as the starting
point for continuing a cherry-pick or revert.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current code uses a set of file-scope static variables to tell the
cherry-pick/ revert machinery how to replay the changes, and
initializes them by parsing the command-line arguments. In later
steps in this series, we would like to introduce an API function that
calls into this machinery directly and have a way to tell it what to
do. Hence, introduce a structure to group these variables, so that
the API can take them as a single replay_options parameter. The only
exception is the variable "me" -- remove it since it not an
independent option, and can be inferred from the action.
Unfortunately, this patch introduces a minor regression. Parsing
strategy-option violates a C89 rule: Initializers cannot refer to
variables whose address is not known at compile time. Currently, this
rule is violated by some other parts of Git as well, and it is
possible to get GCC to report these instances using the "-std=c89
-pedantic" option.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Functions which act on commits currently rely on a file-scope static
variable to be set before they're called. Consequently, the API and
corresponding callsites are ugly and unclear. Remove this variable
and change their API to accept the commit to act on as additional
argument so that the callsites change from looking like
commit = prepare_a_commit();
act_on_commit();
to looking like
commit = prepare_a_commit();
act_on_commit(commit);
This change is also in line with our long-term goal of exposing some
of these functions through a public API.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "-x" command-line option is used to record the name of the
original commits being picked in the commit message. The variable
corresponding to this option is named "no_replay" for historical
reasons; the name is especially confusing because the term "replay" is
used to describe what cherry-pick does (for example, in the
documentation of the "--mainline" option). So, give the variable
corresponding to the "-x" command-line option a better name:
"record_origin".
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only place get_encoding uses the global "commit" variable is when
writing an error message explaining that its lone argument was NULL.
Since the function's only caller ensures that a NULL argument isn't
passed, we can remove this check with two beneficial consequences:
1. Since the function doesn't use the global "commit" variable any
more, it won't need to change when we eliminate the global variable
later in the series.
2. Translators no longer need to localize an error message that will
never be shown.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The add_message_to_msg function has some dead code, an unclear API,
only one callsite. While it originally intended fill up an empty
commit message with the commit object name while picking, it really
doesn't do this -- a bug introduced in v1.5.1-rc1~65^2~2 (Make
git-revert & git-cherry-pick a builtin, 2007-03-01). Today, tests in
t3505-cherry-pick-empty.sh indicate that not filling up an empty
commit message is the desired behavior. Re-implement and inline the
function accordingly, with a beneficial side-effect: don't dereference
a NULL pointer when the commit doesn't have a delimeter after the
header.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable future callers to report a conflict and not die immediately by
introducing a new function called error_resolve_conflict.
Re-implement die_resolve_conflict as a call to error_resolve_conflict
followed by a call to die. Consequently, the message printed by
die_resolve_conflict changes from
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree ...
...
to
error: 'commit' is not possible because you have unmerged files.
hint: Fix them up in the work tree ...
hint: ...
fatal: Exiting because of an unresolved conflict.
Hints are printed using the same advise function introduced in
v1.7.3-rc0~26^2~3 (Introduce advise() to print hints, 2010-08-11).
Inspired-by: Christian Couder <chistian.couder@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although it is probably an uncommon operation, there is no
reason to disallow it, as it works just fine. It is the
reverse of a cherry-pick of a root commit, which is already
allowed.
We do have to tweak one check on whether we have a merge
commit, which assumed we had at least one parent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '-r' command-line option is a no-op provided only for backward
compatiblity since abd6970 (cherry-pick: make -r the default, 2006-10-05),
and somehow ended up surviving across reimplementation in C at 9509af6
(Make git-revert & git-cherry-pick a builtin, 2007-03-01) and another
rewrite of the command line parser at f810379 (Make builtin-revert.c use
parse_options, 2007-10-07). We should have stopped advertising the option
long time ago.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/i18n-st: (69 commits)
i18n: git-shortlog basic messages
i18n: git-revert split up "could not revert/apply" message
i18n: git-revert literal "me" messages
i18n: git-revert "Your local changes" message
i18n: git-revert basic messages
i18n: git-notes GIT_NOTES_REWRITE_MODE error message
i18n: git-notes basic commands
i18n: git-gc "Auto packing the repository" message
i18n: git-gc basic messages
i18n: git-describe basic messages
i18n: git-clean clean.requireForce messages
i18n: git-clean basic messages
i18n: git-bundle basic messages
i18n: git-archive basic messages
i18n: git-status "renamed: " message
i18n: git-status "Initial commit" message
i18n: git-status "Changes to be committed" message
i18n: git-status shortstatus messages
i18n: git-status "nothing to commit" messages
i18n: git-status basic messages
...
Conflicts:
builtin/branch.c
builtin/checkout.c
builtin/clone.c
builtin/commit.c
builtin/grep.c
builtin/merge.c
builtin/push.c
builtin/revert.c
t/t3507-cherry-pick-conflict.sh
t/t7607-merge-overwrite.sh
|
|
Split up the "could not %s %s... %s" message into "could not revert
%s... %s" and "could not apply %s... %s". This makes it easier for
translators to understand the message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jonathan Nieder
Johannes Sixt
Nguyễn Thái Ngọc Duy
Ramkumar Ramachandra
Ramsay Jones
Jay Soffian
René Scharfe
Jeff King
Ævar Arnfjörð Bjarmason