| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Let's replace the 2 different pieces of code that write a
promisor file in 'builtin/repack.c' and 'fetch-pack.c'
with a new function called 'write_promisor_file()' in
'pack-write.c' and 'pack.h'.
This might also help us in the future, if we want to put
back the ref names and associated hashes that were in
the promisor files we are repacking in 'builtin/repack.c'
as suggested by a NEEDSWORK comment just above the code
we are refactoring.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git repack' creates a pack with the same name as any existing
pack, it moves the existing one to 'old-pack-xxx.{pack,idx,...}' and
then renames the new one into place.
Eventually, it would be nice to have 'git repack' allow for writing a
multi-pack index at the critical time (after the new packs have been
written / moved into place, but before the old ones have been deleted).
Guessing that this option might be called '--write-midx', this makes the
following situation (where repacks are issued back-to-back without any
new objects) impossible:
$ git repack -adb
$ git repack -adb --write-midx
In the second repack, the existing packs are overwritten verbatim with
the same rename-to-old sequence. At that point, the current MIDX is
invalidated, since it refers to now-missing packs. So that code wants to
be run after the MIDX is re-written. But (prior to this patch) the new
MIDX can't be written until the new packs are moved into place. So, we
have a circular dependency.
This is all hypothetical, since no code currently exists to write a MIDX
safely during a 'git repack' (the 'GIT_TEST_MULTI_PACK_INDEX' does so
unsafely). Putting hypothetical aside, though: why do we need to rename
existing packs to be prefixed with 'old-' anyway?
This behavior dates all the way back to 2ad47d6 (git-repack: Be
careful when updating the same pack as an existing one., 2006-06-25).
2ad47d6 is mainly concerned about a case where a newly written pack
would have a different structure than its index. This used to be
possible when the pack name was a hash of the set of objects. Under this
naming scheme, two packs that store the same set of objects could differ
in delta selection, object positioning, or both. If this happened, then
any such packs would be unreadable in the instant between copying the
new pack and new index (i.e., either the index or pack will be stale
depending on the order that they were copied).
But since 1190a1a (pack-objects: name pack files after trailer hash,
2013-12-05), this is no longer possible, since pack files are named not
after their logical contents (i.e., the set of objects), but by the
actual checksum of their contents. So, this old- behavior can safely go,
which allows us to avoid our circular dependency above.
In addition to avoiding the circular dependency, this patch also makes
'git repack' a lot simpler, since we don't have to deal with failures
encountered when renaming existing packs to be prefixed with 'old-'.
This patch is mostly limited to removing code paths that deal with the
'old' prefixing, with the exception of files that include the pack's
name in their own filename, like .idx, .bitmap, and related files. The
exception is that we want to continue to trust what pack-objects wrote.
That is, it is not the case that we pretend as if pack-objects didn't
write files identical to ones that already exist, but rather that we
respect what pack-objects wrote as the source of truth. That cuts two
ways:
- If pack-objects produced an identical pack to one that already
exists with a bitmap, but did not produce a bitmap, we remove the
bitmap that already exists. (This behavior is codified in t7700.14).
- If pack-objects produced an identical pack to one that already
exists, we trust the just-written version of the coresponding .idx,
.promisor, and other files over the ones that already exist. This
ensures that we use the most up-to-date versions of this files,
which is safe even in the face of format changes in, say, the .idx
file (which would not be reflected in the .idx file's name).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the subsequent commit, it will become useful to keep track of which
metadata files were written by pack-objects. We already do this to an
extent with the 'exts' array, which only is used in the context of
existing packs.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We'll use it in a helper function soon.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a packfile is removed by "git repack", multi-pack-index gets
cleared; the code was taught to do so less aggressively by first
checking if the midx actually refers to a pack that no longer
exists.
* tb/repack-clearing-midx:
midx: traverse the local MIDX first
builtin/repack.c: invalidate MIDX only when necessary
|
|
When a repository has an alternate object directory configured, callers
can traverse through each alternate's MIDX by walking the '->next'
pointer.
But, when 'prepare_multi_pack_index_one()' loads multiple MIDXs, it
places the new ones at the front of this pointer chain, not at the end.
This can be confusing for callers such as 'git repack -ad', causing test
failures like in t7700.6 with 'GIT_TEST_MULTI_PACK_INDEX=1'.
The occurs when dropping a pack known to the local MIDX with alternates
configured that have their own MIDX. Since the alternate's MIDX is
returned via 'get_multi_pack_index()', 'midx_contains_pack()' returns
true (which is correct, since it traverses through the '->next' pointer
to find the MIDX in the chain that does contain the requested object).
But, we call 'clear_midx_file()' on 'the_repository', which drops the
MIDX at the path of the first MIDX in the chain, which (in the case of
t7700.6 is the one in the alternate).
This patch addresses that by:
- placing the local MIDX first in the chain when calling
'prepare_multi_pack_index_one()', and
- introducing a new 'get_local_multi_pack_index()', which explicitly
returns the repository-local MIDX, if any.
Don't impose an additional order on the MIDX's '->next' pointer beyond
that the first item in the chain must be local if one exists so that we
avoid a quadratic insertion.
Likewise, use 'get_local_multi_pack_index()' in
'remove_redundant_pack()' to fix the formerly broken t7700.6 when run
with 'GIT_TEST_MULTI_PACK_INDEX=1'.
Finally, note that the MIDX ordering invariant is only preserved by the
insertion order in 'prepare_packed_git()', which traverses through the
ODB's '->next' pointer, meaning we visit the local object store first.
This fragility makes this an undesirable long-term solution if more
callers are added, but it is acceptable for now since this is the only
caller.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 525e18c04b (midx: clear midx on repack, 2018-07-12), 'git repack'
learned to remove a multi-pack-index file if it added or removed a pack
from the object store.
This mechanism is a little over-eager, since it is only necessary to
drop a MIDX if 'git repack' removes a pack that the MIDX references.
Adding a pack outside of the MIDX does not require invalidating the
MIDX, and likewise for removing a pack the MIDX does not know about.
Teach 'git repack' to check for this by loading the MIDX, and checking
whether the to-be-removed pack is known to the MIDX. This requires a
slightly odd alternation to a test in t5319, which is explained with a
comment. A new test is added to show that the MIDX is left alone when
both packs known to it are marked as .keep, but two packs unknown to it
are removed and combined into one new pack.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* tb/shallow-cleanup:
shallow: use struct 'shallow_lock' for additional safety
shallow.h: document '{commit,rollback}_shallow_file'
shallow: extract a header file for shallow-related functions
commit: make 'commit_graft_pos' non-static
|
|
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In builtin.h, there exists the distinctly lib-ish function
prune_packed_objects(). This function can currently only be called by
built-in commands but, unlike all of the other functions in the header,
it does not make sense to impose this restriction as the functionality
can be logically reused in libgit.
Extract this function into prune-packed.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to generate multi-pack index learned to show (or not to
show) progress indicators.
* wb/midx-progress:
multi-pack-index: add [--[no-]progress] option.
midx: honor the MIDX_PROGRESS flag in midx_repack
midx: honor the MIDX_PROGRESS flag in verify_midx_file
midx: add progress to expire_midx_packs
midx: add progress to write_midx_file
midx: add MIDX_PROGRESS flag
|
|
Add the MIDX_PROGRESS flag and update the
write|verify|expire|repack functions in midx.h
to accept a flags parameter. The MIDX_PROGRESS
flag indicates whether the caller of the function
would like progress information to be displayed.
This patch only changes the method prototypes
and does not change the functionality. The
functionality change will be handled by a later patch.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The specification of promisor packfiles (in partial-clone.txt) states
that the .promisor files that accompany packfiles do not matter (just
like .keep files), so whenever a packfile is fetched from the promisor
remote, Git has been writing empty .promisor files. But these files
could contain more useful information.
So instead of writing empty files, write the refs fetched to these
files. This makes it easier to debug issues with partial clones, as we
can identify what refs (and their associated hashes) were fetched at the
time the packfile was downloaded, and if necessary, compare those hashes
against what the promisor remote reports now.
This is implemented by teaching fetch-pack to write its own non-empty
.promisor file whenever it knows the name of the pack's lockfile. This
covers the case wherein the user runs "git fetch" with an internal
protocol or HTTP protocol v2 (fetch_refs_via_pack() in transport.c sets
lock_pack) and with HTTP protocol v0/v1 (fetch_git() in remote-curl.c
passes "--lock-pack" to "fetch-pack").
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
|
|
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
|
|
Use the_hash_algo when calling xwrite with a hex object ID so that the
proper amount of data is written.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7328482253 (repack: disable bitmaps-by-default if .keep files
exist, 2019-06-29) taught repack to prefer disabling bitmaps to
duplicating objects (unless bitmaps were asked for explicitly).
But there's an easier way to do this: if we keep passing the
--honor-pack-keep flag to pack-objects when auto-enabling bitmaps, then
pack-objects already makes the same decision (it will disable bitmaps
rather than duplicate). Better still, pack-objects can actually decide
to do so based not just on the presence of a .keep file, but on whether
that .keep file actually impacts the new pack we're making (so if we're
racing with a push or fetch, for example, their temporary .keep file
will not block us from generating bitmaps if they haven't yet updated
their refs).
And because repack uses the --write-bitmap-index-quiet flag, we don't
have to worry about pack-objects generating confusing warnings when it
does see a .keep file. We can confirm this by tweaking the .keep test to
check repack's stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on various config options, a full repack may not be able to
build a reachability bitmap index (e.g., if pack.packSizeLimit forces us
to write multiple packs). In these cases pack-objects may write a
warning to stderr.
Since 36eba0323d (repack: enable bitmaps by default on bare repos,
2019-03-14), we may generate these warnings even when the user did not
explicitly ask for bitmaps. This has two downsides:
- it can be confusing, if they don't know what bitmaps are
- a daemonized auto-gc will write this to its log file, and the
presence of the warning may suppress further auto-gc (until
gc.logExpiry has elapsed)
Let's have repack communicate to pack-objects that the choice to turn on
bitmaps was not made explicitly by the user, which in turn allows
pack-objects to suppress these warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Generation of pack bitmaps are now disabled when .keep files exist,
as these are mutually exclusive features.
* ew/repack-with-bitmaps-by-default:
repack: disable bitmaps-by-default if .keep files exist
|
|
"git multi-pack-index" learned expire and repack subcommands.
* ds/midx-expire-repack:
t5319: use 'test-tool path-utils' instead of 'ls -l'
t5319-multi-pack-index.sh: test batch size zero
midx: add test that 'expire' respects .keep files
multi-pack-index: test expire while adding packs
midx: implement midx_repack()
multi-pack-index: prepare 'repack' subcommand
multi-pack-index: implement 'expire' subcommand
midx: refactor permutation logic and pack sorting
midx: simplify computation of pack name lengths
multi-pack-index: prepare for 'expire' subcommand
Docs: rearrange subcommands for multi-pack-index
repack: refactor pack deletion for future use
|
|
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
|
|
Bitmaps aren't useful with multiple packs, and users with
.keep files ended up with redundant packs when bitmaps
got enabled by default in bare repos.
So detect when .keep files exist and stop enabling bitmaps
by default in that case.
Wasteful (but otherwise harmless) race conditions with .keep files
documented by Jeff King still apply and there's a chance we'd
still end up with redundant data on the FS:
https://public-inbox.org/git/20190623224244.GB1100@sigill.intra.peff.net/
v2: avoid subshell in test case, be multi-index aware
Fixes: 36eba0323d3288a8 ("repack: enable bitmaps by default on bare repos")
Signed-off-by: Eric Wong <e@80x24.org>
Helped-by: Jeff King <peff@peff.net>
Reported-by: Janos Farkas <chexum@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using the repository_format_partial_clone global
and fetch_objects() directly, let's use has_promisor_remote()
and promisor_remote_get_direct().
This way all the configured promisor remotes will be taken
into account, not only the one specified by
extensions.partialClone.
Also when cloning or fetching using a partial clone filter,
remote.origin.promisor will be set to "true" instead of
setting extensions.partialClone to "origin". This makes it
possible to use many promisor remote just by fetching from
them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The repack builtin deletes redundant pack-files and their
associated .idx, .promisor, .bitmap, and .keep files. We will want
to re-use this logic in the future for other types of repack, so
pull the logic into 'unlink_pack_path()' in packfile.c.
The 'ignore_keep' parameter is enabled for the use in repack, but
will be important for a future caller.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A typical use case for bare repos is for serving clones and
fetches to clients. Enable bitmaps by default on bare repos to
make it easier for admins to host git repos in a performant way.
Signed-off-by: Eric Wong <e@80x24.org>
Helped-by: Jeff King <peff@peff.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git gc" and "git repack" did not close the open packfiles that
they found unneeded before removing them, which didn't work on a
platform incapable of removing an open file. This has been
corrected.
* js/gc-repack-close-before-remove:
gc/repack: release packs when needed
|
|
On Windows, files cannot be removed nor renamed if there are still
handles held by a process. To remedy that, we introduced the
close_all_packs() function.
Earlier, we made sure that the packs are released just before `git gc`
is spawned, in case that gc wants to remove no-longer needed packs.
But this developer forgot that gc itself also needs to let go of packs,
e.g. when consolidating all packs via the --aggressive option.
Likewise, `git repack -d` wants to delete obsolete packs and therefore
needs to close all pack handles, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More _("i18n") markings.
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
|
|
Tests for the recently introduced multi-pack index machinery.
* ds/test-multi-pack-index:
packfile: close multi-pack-index in close_all_packs
multi-pack-index: define GIT_TEST_MULTI_PACK_INDEX
midx: close multi-pack-index on repack
midx: fix broken free() in close_midx()
|
|
Two strings are slightly updated to be consistent with the rest: die()
starts with lowercase.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git repack" in a shallow clone did not correctly update the
shallow points in the repository, leading to a repository that
does not pass fsck.
* js/shallow-and-fetch-prune:
repack -ad: prune the list of shallow commits
shallow: offer to prune only non-existing entries
repack: point out a bug handling stale shallow info
|
|
`git repack` can drop unreachable commits without further warning,
making the corresponding entries in `.git/shallow` invalid, which causes
serious problems when deepening the branches.
One scenario where unreachable commits are dropped by `git repack` is
when a `git fetch --prune` (or even a `git fetch` when a ref was
force-pushed in the meantime) can make a commit unreachable that was
reachable before.
Therefore it is not safe to assume that a `git repack -adlf` will keep
unreachable commits alone (under the assumption that they had not been
packed in the first place, which is an assumption at least some of Git's
code seems to make).
This is particularly important to keep in mind when looking at the
`.git/shallow` file: if any commits listed in that file become
unreachable, it is not a problem, but if they go missing, it *is* a
problem. One symptom of this problem is that a deepening fetch may now
fail with
fatal: error in object: unshallow <commit-hash>
To avoid this problem, let's prune the shallow list in `git repack` when
the `-d` option is passed, unless `-A` is passed, too (which would force
the now-unreachable objects to be turned into loose objects instead of
being deleted). Additionally, we also need to take `--keep-reachable`
and `--unpack-unreachable=<date>` into account.
Note: an alternative solution discussed during the review of this patch
was to teach `git fetch` to simply ignore entries in .git/shallow if the
corresponding commits do not exist locally. A quick test, however,
revealed that the .git/shallow file is written during a shallow *clone*,
in which case the commits do not exist, either, but the "shallow" line
*does* need to be sent. Therefore, this approach would be a lot more
finicky than the approach presented by the this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The multi-pack-index feature is tested in isolation by
t5319-multi-pack-index.sh, but there are many more interesting
scenarios in the test suite surrounding pack-file data shapes
and interactions. Since the multi-pack-index is an optional
data structure, it does not make sense to include it by default
in those tests.
Instead, add a new GIT_TEST_MULTI_PACK_INDEX environment variable
that enables core.multiPackIndex and writes a multi-pack-index
after each 'git repack' command. This adds extra test coverage
when needed.
There are a few spots in the test suite that need to react to this
change:
* t5319-multi-pack-index.sh: there is a test that checks that
'git repack' deletes the multi-pack-index. Disable the environment
variable to ensure this still happens.
* t5310-pack-bitmaps.sh: One test moves a pack-file from the object
directory to an alternate. This breaks the multi-pack-index, so
delete the multi-pack-index at this point, if it exists.
* t9300-fast-import.sh: One test verifies the number of files in
the .git/objects/pack directory is exactly 8. Exclude the
multi-pack-index from this count so it is still 8 in all cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When repacking, we may remove pack-files. This invalidates the
multi-pack-index (if it exists). Previously, we removed the
multi-pack-index file before removing any pack-file. In some cases,
the repack command may load the multi-pack-index into memory. This
may lead to later in-memory references to the non-existent pack-
files.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Note that while the error messages here are not translated, the end user
should never see them. We invoke git pack-objects shortly before both
invocations, so we can be fairly certain that the data we're receiving
is in fact valid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Lift code from GitHub to restrict delta computation so that an
object that exists in one fork is not made into a delta against
another object that does not appear in the same forked repository.
* cc/delta-islands:
pack-objects: move 'layer' into 'struct packing_data'
pack-objects: move tree_depth into 'struct packing_data'
t5320: tests for delta islands
repack: add delta-islands support
pack-objects: add delta-islands support
pack-objects: refactor code into compute_layer_order()
Add delta-islands.{c,h}
|
|
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
|
|
After a partial clone, repeated fetches from promisor remote would
have accumulated many packfiles marked with .promisor bit without
getting them coalesced into fewer packfiles, hurting performance.
"git repack" now learned to repack them.
* jt/repack-promisor-packs:
repack: repack promisor objects if -a or -A is set
repack: refactor setup of pack-objects cmd
|
|
Implement simple support for --delta-islands option and
repack.useDeltaIslands config variable in git repack.
This allows users to setup delta islands in their config and
get the benefit of less disk usage while cloning and fetching
is still quite fast and not much more CPU intensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, repack does not touch promisor packfiles at all, potentially
causing the performance of repositories that have many such packfiles to
drop. Therefore, repack all promisor objects if invoked with -a or -A.
This is done by an additional invocation of pack-objects on all promisor
objects individually given, which takes care of deduplication and allows
the resulting packfiles to respect flags such as --max-pack-size.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subsequent patch will teach repack to run pack-objects with some same
and some different arguments if repacking of promisor objects is
required. Refactor the setup of the pack-objects cmd so that setting up
the arguments common to both is done in a function.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a 'git repack' command replaces existing packfiles, then we must
clear the existing multi-pack-index before moving the packfiles it
references.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allow to keep existing packs by having companion .keep files. This
is helpful when a pack is permanently kept. In the next patch, git-gc
just wants to keep a pack temporarily, for one pack-objects
run. git-gc can use --keep-pack for this use case.
A note about why the pack_keep field cannot be reused and
pack_keep_in_core has to be added. This is about the case when
--keep-pack is specified together with either --keep-unreachable or
--unpack-unreachable, but --honor-pack-keep is NOT specified.
In this case, we want to exclude objects from the packs specified on
command line, not from ones with .keep files. If only one bit flag is
used, we have to clear pack_keep on pack files with the .keep file.
But we can't make any assumption about unreachable objects in .keep
packs. If "pack_keep" field is false for .keep packs, we could
potentially pull lots of unreachable objects into the new pack, or
unpack them loose. The safer approach is ignore all packs with either
.keep file or --keep-pack.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach gc to stop traversal at promisor objects, and to leave promisor
packfiles alone. This has the effect of only repacking non-promisor
packfiles, and preserves the distinction between promisor packfiles and
non-promisor packfiles.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Christian Couder
Taylor Blau
Jeff King
Junio C Hamano
Denton Liu
William Baker
Jonathan Tan
brian m. carlson
Eric Wong
Derrick Stolee
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Derrick Stolee
Brandon Williams