| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Small code and comment clean-up.
* jk/tighten-alloc:
receive-pack: use FLEX_ALLOC_MEM in queue_command()
correct FLEXPTR_* example in comment
|
|
Use the macro FLEX_ALLOC_MEM instead of open-coding it. This shortens
and simplifies the code a bit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" and "git clone" learned to give better progress meters
to the end user who is waiting on the terminal.
* jk/push-progress:
receive-pack: send keepalives during quiet periods
receive-pack: turn on connectivity progress
receive-pack: relay connectivity errors to sideband
receive-pack: turn on index-pack resolving progress
index-pack: add flag for showing delta-resolution progress
clone: use a real progress meter for connectivity check
check_connected: add progress flag
check_connected: relay errors to alternate descriptor
check_everything_connected: use a struct with named options
check_everything_connected: convert to argv_array
rev-list: add optional progress reporting
check_everything_connected: always pass --quiet to rev-list
|
|
After a client has sent us the complete pack, we may spend
some time processing the data and running hooks. If the
client asked us to be quiet, receive-pack won't send any
progress data during the index-pack or connectivity-check
steps. And hooks may or may not produce their own progress
output. In these cases, the network connection is totally
silent from both ends.
Git itself doesn't care about this (it will wait forever),
but other parts of the system (e.g., firewalls,
load-balancers, etc) might hang up the connection. So we'd
like to send some sort of keepalive to let the network and
the client side know that we're still alive and processing.
We can use the same trick we did in 05e9515 (upload-pack:
send keepalive packets during pack computation, 2013-09-08).
Namely, we will send an empty sideband data packet every `N`
seconds that we do not relay any stderr data over the
sideband channel. As with 05e9515, this means that we won't
bother sending keepalives when there's actual progress data,
but will kick in when it has been disabled (or if there is a
lull in the progress data).
The concept is simple, but the details are subtle enough
that they need discussing here.
Before the client sends us the pack, we don't want to do any
keepalives. We'll have sent our ref advertisement, and we're
waiting for them to send us the pack (and tell us that they
support sidebands at all).
While we're receiving the pack from the client (or waiting
for it to start), there's no need for keepalives; it's up to
them to keep the connection active by sending data.
Moreover, it would be wrong for us to do so. When we are the
server in the smart-http protocol, we must treat our
connection as half-duplex. So any keepalives we send while
receiving the pack would potentially be buffered by the
webserver. Not only does this make them useless (since they
would not be delivered in a timely manner), but it could
actually cause a deadlock if we fill up the buffer with
keepalives. (It wouldn't be wrong to send keepalives in this
phase for a full-duplex connection like ssh; it's simply
pointless, as it is the client's responsibility to speak).
As soon as we've gotten all of the pack data, then the
client is waiting for us to speak, and we should start
keepalives immediately. From here until the end of the
connection, we send one any time we are not otherwise
sending data.
But there's a catch. Receive-pack doesn't know the moment
we've gotten all the data. It passes the descriptor to
index-pack, who reads all of the data, and then starts
resolving the deltas. We have to communicate that back.
To make this work, we instruct the sideband muxer to enable
keepalives in three phases:
1. In the beginning, not at all.
2. While reading from index-pack, wait for a signal
indicating end-of-input, and then start them.
3. Afterwards, always.
The signal from index-pack in phase 2 has to come over the
stderr channel which the muxer is reading. We can't use an
extra pipe because the portable run-command interface only
gives us stderr and stdout.
Stdout is already used to pass the .keep filename back to
receive-pack. We could also send a signal there, but then we
would find out about it in the main thread. And the
keepalive needs to be done by the async muxer thread (since
it's the one writing sideband data back to the client). And
we can't reliably signal the async thread from the main
thread, because the async code sometimes uses threads and
sometimes uses forked processes.
Therefore the signal must come over the stderr channel,
where it may be interspersed with other random
human-readable messages from index-pack. This patch makes
the signal a single NUL byte. This is easy to parse, should
not appear in any normal stderr output, and we don't have to
worry about any timing issues (like seeing half the signal
bytes in one read(), and half in a subsequent one).
This is a bit ugly, but it's simple to code and should work
reliably.
Another option would be to stop using an async thread for
muxing entirely, and just poll() both stderr and stdout of
index-pack from the main thread. This would work for
index-pack (because we aren't doing anything useful in the
main thread while it runs anyway). But it would make the
connectivity check and the hook muxers much more
complicated, as they need to simultaneously feed the
sub-programs while reading their stderr.
The index-pack phase is the only one that needs this
signaling, so it could simply behave differently than the
other two. That would mean having two separate
implementations of copy_to_sideband (and the keepalive
code), though. And it still doesn't get rid of the
signaling; it just means we can write a nicer message like
"END_OF_INPUT" or something on stdout, since we don't have
to worry about separating it from the stderr cruft.
One final note: this signaling trick is only done with
index-pack, not with unpack-objects. There's no point in
doing it for the latter, because by definition it only kicks
in for a small number of objects, where keepalives are not
as useful (and this conveniently lets us avoid duplicating
the implementation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we receive a large push, the server side of the
connection may spend a lot of time (30s or more for a full
push of linux.git) walking the object graph without
producing any output. Let's give the user some indication
that we're actually working.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the connectivity check encounters a problem when
receiving a push, the error output goes to receive-pack's
stderr, whose destination depends on the protocol used
(ssh tends to send it to the user, though without a "remote"
prefix; http will generally eat it in the server's error
log).
The information should consistently go back to the user, as
there is a reasonable chance their client is buggy and
generating a bad pack.
We can do so by muxing it over the sideband as we do with
other sub-process stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we receive a large push, the server side may have to
spend a lot of CPU processing the incoming packfile.
During the "receiving" phase, we are typically network
bound, and the client is writing its own progress to the
user. But during the delta resolution phase, we may spend
minutes (e.g., for a full push of linux.git) without
making any indication to the user that the connection has
not hung.
Let's ask index-pack to produce progress output for this
phase (unless the client asked us to be quiet, of course).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The number of variants of check_everything_connected has
grown over the years, so that the "real" function takes
several possibly-zero, possibly-NULL arguments. We hid the
complexity behind some wrapper functions, but this doesn't
scale well when we want to add new options.
If we add more wrapper variants to handle the new options,
then we can get a combinatorial explosion when those options
might be used together (right now nobody wants to use both
"shallow" and "transport" together, so we get by with just a
few wrappers).
If instead we add new parameters to each function, each of
which can have a default value, then callers who want the
defaults end up with confusing invocations like:
check_everything_connected(fn, 0, data, -1, 0, NULL);
where it is unclear which parameter is which (and every
caller needs updated when we add new options).
Instead, let's add a struct to hold all of the optional
parameters. This is a little more verbose for the callers
(who have to declare the struct and fill it in), but it
makes their code much easier to follow, because every option
is named as it is set (and unused options do not have to be
mentioned at all).
Note that we could also stick the iteration function and its
callback data into the option struct, too. But since those
are required for each call, by avoiding doing so, we can let
very simple callers just pass "NULL" for the options and not
worry about the struct at all.
While we're touching each site, let's also rename the
function to check_connected(). The existing name was quite
long, and not all of the wrappers even used the full name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pre/post receive hook may be interested in more information from the
user. This information can be transmitted when both client and server
support the "push-options" capability, which when used is a phase directly
after update commands ended by a flush pkt.
Similar to the atomic option, the server capability can be disabled via
the `receive.advertisePushOptions` config variable. While documenting
this, fix a nit in the `receive.advertiseAtomic` wording.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The environment variable GIT_PUSH_OPTION_COUNT is set to the number of
push options sent, and GIT_PUSH_OPTION_{0,1,..} is set to the transmitted
option.
The code is not executed as the push options are set to NULL, nor is the
new capability advertised.
There was some discussion back and forth how to present these push options
to the user as there are some ways to do it:
Keep all options in one environment variable
============================================
+ easiest way to implement in Git
- This would make things hard to parse correctly in the hook.
Put the options in files instead,
filenames are in GIT_PUSH_OPTION_FILES
======================================
+ After a discussion about environment variables and shells, we may not
want to put user data into an environment variable (see [1] for example).
+ We could transmit binaries, i.e. we're not bound to C strings as
we are when using environment variables to the user.
+ Maybe easier to parse than constructing environment variable names
GIT_PUSH_OPTION_{0,1,..} yourself
- cleanup of the temporary files is hard to do reliably
- we have race conditions with multiple clients pushing, hence we'd need
to use mkstemp. That's not too bad, but still.
Use environment variables, but restrict to key/value pairs
==========================================================
(When the user pushes a push option `foo=bar`, we'd
GIT_PUSH_OPTION_foo=bar)
+ very easy to parse for a simple model of push options
- it's not sufficient for more elaborate models, e.g.
it doesn't allow doubles (e.g. cc=reviewer@email)
Present the options in different environment variables
======================================================
(This is implemented)
* harder to parse as a user, but we have a sample hook for that.
- doesn't allow binary files
+ allows the same option twice, i.e. is not restrictive about
options, except for binary files.
+ doesn't clutter a remote directory with (possibly stale)
temporary files
As we first want to focus on getting simple strings to work
reliably, we go with the last option for now. If we want to
do transmission of binaries later, we can just attach a
'side-channel', e.g. "any push option that contains a '\0' is
put into a file instead of the environment variable and we'd
have new GIT_PUSH_OPTION_FILES, GIT_PUSH_OPTION_FILENAME_{0,1,..}
environment variables".
[1] 'Shellshock' https://lwn.net/Articles/614218/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow messages that are generated by auto gc during "git push" on
the receiving end to be explicitly passed back to the sending end
over sideband, so that they are shown with "remote: " prefix to
avoid confusing the users.
* lf/receive-pack-auto-gc-to-client:
receive-pack: send auto-gc output over sideband 2
|
|
Redirect auto-gc output to the sideband such that it is visible to all
clients. As a side effect, all auto-gc error messages are now prefixed
with "remote: " before being printed to stderr on the client-side which
makes it easier to understand that those error messages originate from
the server.
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code restructuring around the "refs" area to prepare for pluggable
refs backends.
* dt/pre-refs-backend: (24 commits)
refs: on symref reflog expire, lock symref not referrent
refs: move resolve_ref_unsafe into common code
show_head_ref(): check the result of resolve_ref_namespace()
check_aliased_update(): check that dst_name is non-NULL
checkout_paths(): remove unneeded flag variable
cmd_merge(): remove unneeded flag variable
fsck_head_link(): remove unneeded flag variable
read_raw_ref(): change flags parameter to unsigned int
files-backend: inline resolve_ref_1() into resolve_ref_unsafe()
read_raw_ref(): manage own scratch space
files-backend: break out ref reading
resolve_ref_1(): eliminate local variable "bad_name"
resolve_ref_1(): reorder code
resolve_ref_1(): eliminate local variable
resolve_ref_unsafe(): ensure flags is always set
resolve_ref_unsafe(): use for loop to count up to MAXDEPTH
resolve_missing_loose_ref(): simplify semantics
t1430: improve test coverage of deletion of badly-named refs
t1430: test for-each-ref in the presence of badly-named refs
t1430: don't rely on symbolic-ref for creating broken symrefs
...
|
|
If there is an error in resolve_ref_unsafe(), it returns NULL. We check
for this case, but not until after calling strip_namespace(). Instead,
call strip_namespace() *after* the NULL check.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make receive-pack use the parse_options API,
bringing it more in line with send-pack and push.
Helped-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Sidhant Sharma [:tk] <tigerkid001@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many manual argv allocations that predate the
argv_array API. Switching to that API brings a few
advantages:
1. We no longer have to manually compute the correct final
array size (so it's one less thing we can screw up).
2. In many cases we had to make a separate pass to count,
then allocate, then fill in the array. Now we can do it
in one pass, making the code shorter and easier to
follow.
3. argv_array handles memory ownership for us, making it
more obvious when things should be free()d and and when
not.
Most of these cases are pretty straightforward. In some, we
switch from "run_command_v" to "run_command" which lets us
directly use the argv_array embedded in "struct
child_process".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many codepaths that run "gc --auto" before exiting kept packfiles
mapped and left the file descriptors to them open, which was not
friendly to systems that cannot remove files that are open. They
now close the packs before doing so.
* js/close-packs-before-gc:
receive-pack: release pack files before garbage-collecting
merge: release pack files before garbage-collecting
am: release pack files before garbage-collecting
fetch: release pack files before garbage-collecting
|
|
A few unportable C construct have been spotted by clang compiler
and have been fixed.
* jk/clang-pedantic:
bswap: add NO_UNALIGNED_LOADS define
avoid shifting signed integers 31 bits
|
|
Before auto-gc'ing, we need to make sure that the pack files are
released in case they need to be repacked and garbage-collected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We sometimes use 32-bit unsigned integers as bit-fields.
It's fine to access the MSB, because it's unsigned. However,
doing so as "1 << 31" is wrong, because the constant "1" is
a signed int, and we shift into the sign bit, causing
undefined behavior.
We can fix this by using "1U" as the constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
In addition to matching stripped refs, one can now add hideRefs
patterns that the full (unstripped) ref is matched against. To
distinguish between stripped and full matches, those new patterns
must be prefixed with a circumflex (^).
This commit also removes support for the undocumented and unintended
hideRefs settings ".have" (suppressing all "have" lines) and
"capabilities^{}" (suppressing the capabilities line).
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To generate "--keep=receive-pack $pid on $host", we write
progressively into a single buffer, which requires keeping
track of how much we've written so far. But since the result
is destined to go into our argv array, we can simply use
argv_array_pushf.
Unfortunately we still have to have a fixed-size buffer for
the gethostname() call, but at least it now doesn't involve
any extra size computation. And as a bonus, we drop an
sprintf and a strcpy call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before sha1_to_hex_r() existed, a simple way to get hex
sha1 into a buffer was with:
strcpy(buf, sha1_to_hex(sha1));
This isn't wrong (assuming the buf is 41 characters), but it
makes auditing the code base for bad strcpy() calls harder,
as these become false positives.
Let's convert them to sha1_to_hex_r(), and likewise for
some calls to find_unique_abbrev(). While we're here, we'll
double-check that all of the buffers are correctly sized,
and use the more obvious GIT_SHA1_HEXSZ constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This strncpy is pointless; we pass the strlen() of the src
string, meaning that it works just like a memcpy. Worse,
though, is that the size has no relation to the destination
buffer, meaning it is a potential overflow. In practice,
it's not. We pass only short constant strings like
"warning: " and "error: ", which are much smaller than the
destination buffer.
We can make this much simpler by just using xsnprintf, which
will check for overflow and return the size for our next
vsnprintf, without us having to run a separate strlen().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An attempt to delete a ref by pushing into a repositorywhose HEAD
symbolic reference points at an unborn branch that cannot be
created due to ref D/F conflict (e.g. refs/heads/a/b exists, HEAD
points at refs/heads/a) failed.
* jx/do-not-crash-receive-pack-wo-head:
receive-pack: crash when checking with non-exist HEAD
|
|
If HEAD of a repository points to a conflict reference, such as:
* There exist a reference named 'refs/heads/jx/feature1', but HEAD
points to 'refs/heads/jx', or
* There exist a reference named 'refs/heads/feature', but HEAD points
to 'refs/heads/feature/bad'.
When we push to delete a reference for this repo, such as:
git push /path/to/bad-head-repo.git :some/good/reference
The git-receive-pack process will crash.
This is because if HEAD points to a conflict reference, the function
`resolve_refdup("HEAD", ...)` does not return a valid reference name,
but a null buffer. Later matching the delete reference against the null
buffer will cause git-receive-pack crash.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The optional new config option `receive.fsck.skipList` specifies the path
to a file listing the names, i.e. SHA-1s, one per line, of objects that
are to be ignored by `git receive-pack` when `receive.fsckObjects = true`.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
The intended use case is for server administrators to inspect objects
that are reported by `git push` as being too problematic to enter the
repository, and to add the objects' SHA-1 to a (preferably sorted) file
when the objects are legitimate, i.e. when it is determined that those
problematic objects should be allowed to enter the server.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For example, missing emails in commit and tag objects can be demoted to
mere warnings with
git config receive.fsck.missingemail=warn
The value is actually a comma-separated list.
In case that the same key is listed in multiple receive.fsck.<msg-id>
lines in the config, the latter configuration wins (this can happen for
example when both $HOME/.gitconfig and .git/config contain message type
settings).
As git receive-pack does not actually perform the checks, it hands off
the setting to index-pack or unpack-objects in the form of an optional
argument to the --strict option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
|
|
A push into an unborn branch, with "receive.denyCurrentBranch" set
to "updateInstead", did not check out the working tree as expected.
* jc/update-instead-into-void:
push-to-deploy: allow pushing into an unborn branch and updating it
|
|
Setting receive.denycurrentbranch to updateinstead and pushing into
the current branch, when the working tree and the index is truly
clean, is supposed to reset the working tree and the index to match
the tree of the pushed commit. This did not work when pushing into
an unborn branch.
The code that drives push-to-checkout hook needs no change, as the
interface is defined so that hook can decide what to do when the
push is coming to an unborn branch and take an appropriate action
since the beginning.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
ref_transaction_delete() will get the same treatment in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extending the js/push-to-deploy topic, the behaviour of "git push"
when updating the working tree and the index with an update to the
branch that is checked out can be tweaked by push-to-checkout hook.
* jc/push-to-checkout:
receive-pack: support push-to-checkout hook
receive-pack: refactor updateInstead codepath
|
|
"git push" has been taught a "--atomic" option that makes push to
update more than one ref an "all-or-none" affair.
* sb/atomic-push:
Document receive.advertiseatomic
t5543-atomic-push.sh: add basic tests for atomic pushes
push.c: add an --atomic argument
send-pack.c: add --atomic command line argument
send-pack: rename ref_update_to_be_sent to check_to_send_update
receive-pack.c: negotiate atomic push support
receive-pack.c: add execute_commands_atomic function
receive-pack.c: move transaction handling in a central place
receive-pack.c: move iterating over all commands outside execute_commands
receive-pack.c: die instead of error in case of possible future bug
receive-pack.c: shorten the execute_commands loop over all commands
|
|
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds the atomic protocol option to allow
receive-pack to inform the client that it has
atomic push capability.
This commit makes the functionality introduced
in the previous commits go live for the serving
side. The changes in documentation reflect the
protocol capabilities of the server.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces the new function execute_commands_atomic which will use
one atomic transaction for all updates. The default behavior is still
the old non atomic way, one ref at a time. This is to cause as little
disruption as possible to existing clients. It is unknown if there are
client scripts that depend on the old non-atomic behavior so we make it
opt-in for now.
A later patch will add the possibility to actually use the functionality
added by this patch. For now use_atomic is always 0.
Inspired-by: Ronnie Sahlberg <sahlberg@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This moves all code related to transactions into the
execute_commands_non_atomic function. This includes
beginning and committing the transaction as well as
dealing with the errors which may occur during the
begin and commit phase of a transaction.
No functional changes intended.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit allows us in a later patch to easily distinguish between
the non atomic way to update the received refs and the atomic way which
is introduced in a later patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Discussion on the previous patch revealed we rather want to err on the
safe side. To do so we need to stop receive-pack in case of the possible
future bug when connectivity is not checked on a shallow push.
Also while touching that code we considered that removing the reported
refs may be harmful in some situations. Sound the message more like a
"This Cannot Happen, Please Investigate!" instead of giving advice to
remove refs.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the main "execute_commands" loop in receive-pack easier to read
by splitting out some steps into helper functions. The new helper
'should_process_cmd' checks if a ref update is unnecessary, whether
due to an error having occurred or for another reason. The helper
'warn_if_skipped_connectivity_check' warns if we have forgotten to
run a connectivity check on a ref which is shallow for the client
which would be a bug.
This will help us to duplicate less code in a later patch when we make
a second copy of the "execute_commands" loop.
No functional change intended.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" into a repository with a working tree normally refuses
to modify the branch that is checked out. The command learned to
optionally do an equivalent of "git reset --hard" only when there
is no change to the working tree and the index instead, which would
be useful to "deploy" by pushing into a repository.
* js/push-to-deploy:
t5516: more tests for receive.denyCurrentBranch=updateInstead
receive-pack: add another option for receive.denyCurrentBranch
|
|
"git remote update --prune" to drop many refs has been optimized.
* mh/simplify-repack-without-refs:
sort_string_list(): rename to string_list_sort()
prune_remote(): iterate using for_each_string_list_item()
prune_remote(): rename local variable
repack_without_refs(): make the refnames argument a string_list
prune_remote(): sort delete_refs_list references en masse
prune_remote(): initialize both delete_refs lists in a single loop
prune_remote(): exit early if there are no stale references
|
|
* rs/receive-pack-use-labs:
use labs() for variables of type long instead of abs()
|
Junio C Hamano
René Scharfe
Jeff King
Stefan Beller
Lukas Fleischer
Michael Haggerty
Sidhant Sharma [:tk]
Johannes Schindelin
brian m. carlson
Jiang Xin
Ronnie Sahlberg