| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The output from git push currently looks like this:
$ git push dest HEAD
fatal: [some message from index-pack]
error: unpack failed: index-pack abnormal exit
To dest
! [remote rejected] HEAD -> master (n/a (unpacker error))
That n/a is meant to be "the per-ref status is not
available" but the nested parentheses just make it look
ugly. Let's turn the final line into just:
! [remote rejected] HEAD -> master (unpacker error)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Receive-pack invokes either unpack-objects or index-pack to
handle the incoming pack. However, we do not redirect the
stderr of the sub-processes at all, so it is never seen by
the client. From the initial thread adding sideband support,
which is here:
http://thread.gmane.org/gmane.comp.version-control.git/139471
it is clear that some messages are specifically kept off the
sideband (with the assumption that they are of interest only
to an administrator, not the client). The stderr of the
subprocesses is mentioned in the thread, but it's unclear if
they are included in that group, or were simply forgotten.
However, there are a few good reasons to show them to the
client:
1. In many cases, they are directly about the incoming
packfile (e.g., fsck warnings with --strict, corruption
in the packfile, etc). Without these messages, the
client just gets "unpacker error" with no extra useful
diagnosis.
2. No matter what the cause, we are probably better off
showing the errors to the client. If the client and the
server admin are not the same entity, it is probably
much easier for the client to cut-and-paste the errors
they see than for the admin to try to dig them out of a
log and correlate them with a particular session.
3. Users of the ssh transport typically already see these
stderr messages, as the remote's stderr is copied
literally by ssh. This brings other transports (http,
and push-over-git if you are crazy enough to enable it)
more in line with ssh. As a bonus for ssh users,
because the messages are now fed through the sideband
and printed by the local git, they will have "remote:"
prepended and be properly interleaved with any local
output to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The unpack-objects command should not generally produce any
output on stdout. However, if it's given extra input after
the packfile, it will spew the remainder to stdout. When
called by receive-pack, this means we will break protocol,
since our stdout is connected to the remote send-pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/capabilities:
fetch-pack: mention server version with verbose output
parse_feature_request: make it easier to see feature values
fetch-pack: do not ask for unadvertised capabilities
do not send client agent unless server does first
send-pack: fix capability-sending logic
include agent identifier in capability string
|
|
The standard output channel of receive-pack is a structured protocol
channel, and subprocesses must never be allowed to leak anything
into it by writing to their standard output.
Use RUN_COMMAND_STDOUT_TO_STDERR option to run_command_v_opt() just
like we do when running hooks to prevent output from "gc" leaking to
the standard output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of having the client advertise a particular version
number in the git protocol, we have managed extensions and
backwards compatibility by having clients and servers
advertise capabilities that they support. This is far more
robust than having each side consult a table of
known versions, and provides sufficient information for the
protocol interaction to complete.
However, it does not allow servers to keep statistics on
which client versions are being used. This information is
not necessary to complete the network request (the
capabilities provide enough information for that), but it
may be helpful to conduct a general survey of client
versions in use.
We already send the client version in the user-agent header
for http requests; adding it here allows us to gather
similar statistics for non-http requests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/receive-pack-keep-errors:
do not override receive-pack errors
|
|
* cb/receive-pack-keep-errors:
do not override receive-pack errors
|
|
Receive runs rev-list --verify-objects in order to detect missing
objects. However, such errors are ignored and overridden later.
Instead, consequently ignore all update commands for which an error has
already been detected.
Some tests in t5504 are obsoleted by this change, because invalid
objects are detected even if fsck is not enabled. Instead, they now test
for different error messages depending on whether or not fsck is turned
on. A better fix would be to force a corruption that will be detected by
fsck but not by rev-list.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
|
|
* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
|
|
* mh/ref-api-less-extra-refs:
write_head_info(): handle "extra refs" locally
show_ref(): remove unused "flag" and "cb_data" arguments
receive-pack: move more work into write_head_info()
|
|
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have been carefully choosing feature names used in the protocol
extensions so that the vocabulary does not contain a word that is a
substring of another word, so it is not a real problem, but we have
recently added "quiet" feature word, which would mean we cannot later
add some other word with "quiet" (e.g. "quiet-push"), which is awkward.
Let's make sure that we can eventually be able to do so by teaching the
clients and servers that feature words consist of non whitespace
letters. This parser also allows us to later add features with parameters
e.g. "feature=1.5" (parameter values need to be quoted for whitespaces,
but we will worry about the detauls when we do introduce them).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old code basically did:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
add_extra_ref(".have", sha1)
for each ref (including real refs and extra refs):
show_ref(refname, sha1)
But there is no need to stuff the alternate refs in extra_refs; we can
call show_ref() directly when iterating over the array, then handle
real refs separately. So change the code to:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
show_ref(".have", sha1)
for each ref (this now only includes real refs):
show_ref(refname, sha1)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function is not used as a callback, so it doesn't need these
arguments. Also change its return type to void.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move some more code from the calling site into write_head_info(), and
inline add_alternate_refs() there. (Some more simplification is
coming, and it is easier if all this code is in the same place.)
Move some helper functions to avoid the need for forward declarations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
resolve_ref() may return a pointer to a static buffer. Callers that
use this value longer than a couple of statements should copy the
value to avoid some hidden resolve_ref() call that may change the
static buffer's value.
The bug found by Tony Wang <wwwjfy@gmail.com> in builtin/merge.c
demonstrates this. The first call is in cmd_merge()
branch = resolve_ref("HEAD", head_sha1, 0, &flag);
Then deep in lookup_commit_or_die() a few lines after, resolve_ref()
may be called again and destroy "branch".
lookup_commit_or_die
lookup_commit_reference
lookup_commit_reference_gently
parse_object
lookup_replace_object
do_lookup_replace_object
prepare_replace_object
for_each_replace_ref
do_for_each_ref
get_loose_refs
get_ref_dir
get_ref_dir
resolve_ref
All call sites are checked and made sure that xstrdup() is called if
the value should be saved.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pushing to delete a ref, it uses 0{40} as an object name to signal
that the request is a deletion. We shouldn't trigger "deletion of a
corrupt ref" warning in such a case, which was designed to notice that a
ref points at an object that is truly missing from the repository.
Reported-by: Stefan Näwe
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ph/push-to-delete-nothing:
receive-pack: don't pass non-existent refs to post-{receive,update} hooks
Conflicts:
builtin/receive-pack.c
|
|
* mh/check-ref-format-3: (23 commits)
add_ref(): verify that the refname is formatted correctly
resolve_ref(): expand documentation
resolve_ref(): also treat a too-long SHA1 as invalid
resolve_ref(): emit warnings for improperly-formatted references
resolve_ref(): verify that the input refname has the right format
remote: avoid passing NULL to read_ref()
remote: use xstrdup() instead of strdup()
resolve_ref(): do not follow incorrectly-formatted symbolic refs
resolve_ref(): extract a function get_packed_ref()
resolve_ref(): turn buffer into a proper string as soon as possible
resolve_ref(): only follow a symlink that contains a valid, normalized refname
resolve_ref(): use prefixcmp()
resolve_ref(): explicitly fail if a symlink is not readable
Change check_refname_format() to reject unnormalized refnames
Inline function refname_format_print()
Make collapse_slashes() allocate memory for its result
Do not allow ".lock" at the end of any refname component
Refactor check_refname_format()
Change check_ref_format() to take a flags argument
Change bad_ref_char() to return a boolean value
...
|
|
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/run-receive-hook-cleanup:
refactor run_receive_hook()
|
|
* jc/receive-verify:
receive-pack: check connectivity before concluding "git push"
check_everything_connected(): libify
check_everything_connected(): refactor to use an iterator
fetch: verify we have everything we need before updating our ref
Conflicts:
builtin/fetch.c
|
|
* jc/fetch-pack-fsck-objects:
test: fetch/receive with fsckobjects
transfer.fsckobjects: unify fetch/receive.fsckobjects
fetch.fsckobjects: verify downloaded objects
Conflicts:
Documentation/config.txt
builtin/fetch-pack.c
|
|
When a push specifies deletion of non-existent refs, the post post-receive and
post-update hooks receive them as input/arguments.
For instance, for the following push, where refs/heads/nonexistent is a ref
which does not exist on the remote side:
git push origin :refs/heads/nonexistent
the post-receive hook receives from standard input:
<null-sha1> SP <null-sha1> SP refs/heads/nonexistent
and the post-update hook receives as arguments:
refs/heads/nonexistent
which does not make sense since it is a no-op.
Teach receive-pack not to pass non-existent refs to the post-receive and
post-update hooks. If the push only attempts to delete non-existent refs,
these hooks are not even called.
The update and pre-receive hooks are still notified about attempted
deletion of non-existent refs to give them a chance to inspect the
situation and act on it.
[jc: mild fix-ups to avoid introducing an extra list; also added fixes to
some tests]
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running a hook has to make complex set-up to establish web of
communication between child process and multiplexer, which is common
regardless of what kind of data is fed to the hook. Refactor the parts
that is specific to the data fed to the particular set of hooks from the
part that runs the hook, so that the code can be reused to drive hooks
that take different kind of data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit ffa69e61d3c5730bd4b65a465efc130b0ef3c7df, reversing
changes made to 4a13c4d14841343d7caad6ed41a152fee550261d.
Adding a new command line option to receive-pack and feed it from
send-pack is not an acceptable way to add features, as there is no
guarantee that your updated send-pack will be talking to updated
receive-pack. New features need to be added via the capability mechanism
negotiated over the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This single variable can be used to set instead of setting fsckobjects
variable for fetch & receive independently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/ref-namespaces:
ref namespaces: tests
ref namespaces: documentation
ref namespaces: Support remote repositories via upload-pack and receive-pack
ref namespaces: infrastructure
Fix prefix handling in ref iteration functions
|
|
Previous commit added one element to the command line, without
making sure the result fits there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
Add the --quiet option to send-pack/receive-pack and pass it to
unpack-objects in the receive-pack codepath and to receive-pack in
the push codepath.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change upload-pack and receive-pack to use the namespace-prefixed refs
when working with the repository, and use the unprefixed refs when
talking to the client, maintaining the masquerade. This allows
clone, pull, fetch, and push to work with a suitably configured
GIT_NAMESPACE.
receive-pack advertises refs outside the current namespace as .have refs
(as it currently does for refs in alternates), so that the client can
use them to minimize data transfer but will otherwise ignore them.
With appropriate configuration, this also allows http-backend to expose
namespaces as multiple repositories with different paths. This only
requires setting GIT_NAMESPACE, which http-backend passes through to
upload-pack and receive-pack.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When receiving a push, we advertise ref tips from any
alternate repositories, in case that helps the client send a
smaller pack. Since these refs don't actually exist in the
destination repository, we don't transmit the real ref
names, but instead use the pseudo-ref ".have".
If your alternate has a large number of duplicate refs (for
example, because it is aggregating objects from many related
repositories, some of which will have the same tags and
branch tips), then we will send each ".have $sha1" line
multiple times. This is a pointless waste of bandwidth, as
we are simply repeating the same fact to the client over and
over.
This patch eliminates duplicate .have refs early on. It does
so efficiently by sorting the complete list and skipping
duplicates. This has the side effect of re-ordering the
.have lines by ascending sha1; this isn't a problem, though,
as the original order was meaningless.
There is a similar .have system in fetch-pack, but it
does not suffer from the same problem. For each alternate
ref we consider in fetch-pack, we actually open the object
and mark it with the SEEN flag, so duplicates are
automatically culled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The foreach_alt_odb function triggers a callback for each
alternate object db we have, with room for a single void
pointer as data. Currently, we always call refs_from_alternate_cb
as the callback function, and then pass another callback (to
receive each ref individually) as the void pointer.
This has two problems:
1. C technically forbids stuffing a function pointer into
a "void *". In practice, this probably doesn't matter
on any architectures git runs on, but it never hurts to
follow the letter of the law.
2. There is no room for an extra data pointer. Indeed, the
alternate_ref_fn that refs_from_alternate_cb calls
takes a void* for data, but we always pass it NULL.
Instead, let's properly stuff our function pointer into a
data struct, which also leaves room for an extra
caller-supplied data pointer. And to keep things simple for
existing callers, let's make a for_each_alternate_ref
function that takes care of creating the extra struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* load_file() returns a void pointer but is using 0 for the return
value
* builtin/receive-pack.c forgot to include builtin.h
* packet_trace_prefix can be marked static
* ll_merge takes a pointer for its last argument, not an int
* crc32 expects a pointer as the second argument but Z_NULL is defined
to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
2006-11-18 for more info)
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-fetch-alt:
fetch-pack: objects in our alternates are available to us
refs_from_alternate: helper to use refs from alternates
Conflicts:
builtin/receive-pack.c
|
|
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
|
|
The receiving end of "git push" advertises the objects that the repository
itself does not use, but are at the tips of refs in other repositories
whose object databases are used as alternates for it. This helps it avoid
having to receive (and the pusher having to send) objects that are already
available to the receiving repository via the alternates mechanism.
Tweak the helper function that implements this feature, and move it to
transport.[ch] for future reuse by other programs.
The additional test demonstrates how this optimization is helping "git push",
and "git fetch" is ignorant about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.
To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).
We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.
Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
|
|
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the definition and callers of string_list_lookup to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/receive-pack-aliased-update-fix:
check_aliased_update: strcpy() instead of strcat() to copy
|
Jeff King
Junio C Hamano
Clemens Buchacher
Michael Haggerty
Nguyễn Thái Ngọc Duy
Pang Yan Han
Josh Triplett
Stephen Boyd
Carlos Martín Nieto
Thiago Farina
Julian Phillips