| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A lot of i18n mark-up for the help text from "git <cmd> -h".
* nd/i18n-parseopt-help: (66 commits)
Use imperative form in help usage to describe an action
Reduce translations by using same terminologies
i18n: write-tree: mark parseopt strings for translation
i18n: verify-tag: mark parseopt strings for translation
i18n: verify-pack: mark parseopt strings for translation
i18n: update-server-info: mark parseopt strings for translation
i18n: update-ref: mark parseopt strings for translation
i18n: update-index: mark parseopt strings for translation
i18n: tag: mark parseopt strings for translation
i18n: symbolic-ref: mark parseopt strings for translation
i18n: show-ref: mark parseopt strings for translation
i18n: show-branch: mark parseopt strings for translation
i18n: shortlog: mark parseopt strings for translation
i18n: rm: mark parseopt strings for translation
i18n: revert, cherry-pick: mark parseopt strings for translation
i18n: rev-parse: mark parseopt strings for translation
i18n: reset: mark parseopt strings for translation
i18n: rerere: mark parseopt strings for translation
i18n: status: mark parseopt strings for translation
i18n: replace: mark parseopt strings for translation
...
|
|
In the next major release, we will switch "git push [$there]" that
does not say what to push from the traditional "matching" to the
updated "simple" semantics, that pushes the current branch to the
branch with the same name only when the current branch is set to
integrate with that remote branch (all other cases will error out).
* mm/push-default-switch-warning:
push: start warning upcoming default change for push.default
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for flipping the default to the "simple" mode from
the "matching" mode that is the historical default, start warning
users when they rely on unconfigured "git push" to default to the
"matching" mode.
Also, advertise for 'simple' where 'current' and 'upstream' are advised.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
New users tend to work on one branch at a time and push the result
out. The current and upstream modes of push is a more suitable default
mode than matching mode for these people, but neither is surprise-free
depending on how the project is set up. Introduce a "simple" mode that
is a subset of "upstream" but only works when the branch is named the same
between the remote and local repositories.
The plan is to make it the new default when push.default is not
configured.
By Matthieu Moy (5) and others
* mm/simple-push:
push.default doc: explain simple after upstream
push: document the future default change for push.default (matching -> simple)
t5570: use explicit push refspec
push: introduce new push.default mode "simple"
t5528-push-default.sh: add helper functions
Undocument deprecated alias 'push.default=tracking'
Documentation: explain push.default option a bit more
|
|
When calling "git push" without argument, we want to allow Git to do
something simple to explain and safe. push.default=matching is unsafe
when used to push to shared repositories, and hard to explain to
beginners in some contexts. It is debatable whether 'upstream' or
'current' is the safest or the easiest to explain, so introduce a new
mode called 'simple' that is the intersection of them: push to the
upstream branch, but only if it has the same name remotely. If not, give
an error that suggests the right command to push explicitely to
'upstream' or 'current'.
A question is whether to allow pushing when no upstream is configured. An
argument in favor of allowing the push is that it makes the new mode work
in more cases. On the other hand, refusing to push when no upstream is
configured encourages the user to set the upstream, which will be
beneficial on the next pull. Lacking better argument, we chose to deny
the push, because it will be easier to change in the future if someone
shows us wrong.
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
|
|
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
|
|
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using this option git will search for all submodules that
have changed in the revisions to be send. It will then try to
push the currently checked out branch of each submodule.
This helps when a user has finished working on a change which
involves submodules and just wants to push everything in one go.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fc/push-prune:
push: add '--prune' option
remote: refactor code into alloc_delete_ref()
remote: reorganize check_pattern_match()
remote: use a local variable in match_push_refs()
Conflicts:
builtin/push.c
|
|
When pushing groups of refs to a remote, there is no simple way to remove
old refs that still exist at the remote that is no longer updated from us.
This will allow us to remove such refs from the remote.
With this change, running this command
$ git push --prune remote refs/heads/*:refs/remotes/laptop/*
removes refs/remotes/laptop/foo from the remote if we do not have branch
"foo" locally anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, progress output is disabled if stderr is not a terminal.
The --progress option can be used to force progress output anyways.
Conversely, --no-progress does not force progress output. In particular,
if stderr is a terminal, progress output is enabled.
This is unintuitive. Change --no-progress to force output off.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When working with submodules it is easy to forget to push a
submodule to the server but pushing a super-project that
contains a commit for that submodule. The result is that the
superproject points at a submodule commit that is not available
on the server.
This adds the option --recurse-submodules=check to push. When
using this option git will check that all submodule commits that
are about to be pushed are present on a remote of the submodule.
To be able to use a combined diff, disabling a diff callback has
been removed from combined-diff.c.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/i18n-st: (69 commits)
i18n: git-shortlog basic messages
i18n: git-revert split up "could not revert/apply" message
i18n: git-revert literal "me" messages
i18n: git-revert "Your local changes" message
i18n: git-revert basic messages
i18n: git-notes GIT_NOTES_REWRITE_MODE error message
i18n: git-notes basic commands
i18n: git-gc "Auto packing the repository" message
i18n: git-gc basic messages
i18n: git-describe basic messages
i18n: git-clean clean.requireForce messages
i18n: git-clean basic messages
i18n: git-bundle basic messages
i18n: git-archive basic messages
i18n: git-status "renamed: " message
i18n: git-status "Initial commit" message
i18n: git-status "Changes to be committed" message
i18n: git-status shortstatus messages
i18n: git-status "nothing to commit" messages
i18n: git-status basic messages
...
Conflicts:
builtin/branch.c
builtin/checkout.c
builtin/clone.c
builtin/commit.c
builtin/grep.c
builtin/merge.c
builtin/push.c
builtin/revert.c
t/t3507-cherry-pick-conflict.sh
t/t7607-merge-overwrite.sh
|
|
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
|
|
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.
To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).
We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.
Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common scenario is to create a new branch and push it (checkout -b &&
push [--set-upstream]). In this case, the user was getting "The current
branch %s has no upstream branch.", which doesn't help much.
Provide the user a command to push the current branch. To avoid the
situation in the future, suggest --set-upstream.
While we're there, also improve the error message in the "detached HEAD"
case. We mention explicitly "detached HEAD" since this is the keyword to
look for in documentations.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).
When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.
In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.
push.default == 'tracking' is left as a deprecated synonym for 'upstream'.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
push: mention "git pull" in error message for non-fast forwards
Standardize do { ... } while (0) style
t/t7003: replace \t with literal tab in sed expression
index-pack: Don't follow replace refs.
|
|
The message remains fuzzy to include "git pull", "git pull --rebase" and
others, but directs the user to the simplest solution in the vast
majority of cases.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Creating a variable nr here to use throughout the function only to change
refspec_nr to nr at the end, having not used refspec_nr the entire time,
is rather pointless. Instead, simply increment refspec_nr.
While at it, use ALLOC_GROW() instead of xrealloc().
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Let check_preimage() use memset() to initialize "struct checkout"
fetch/push: fix usage strings
|
|
* tc/transport-verbosity:
transport: update flags to be in running order
fetch and pull: learn --progress
push: learn --progress
transport->progress: use flag authoritatively
clone: support multiple levels of verbosity
push: support multiple levels of verbosity
fetch: refactor verbosity option handling into transport.[ch]
Documentation/git-push: put --quiet before --verbose
Documentation/git-pull: put verbosity options before merge/fetch ones
Documentation/git-clone: mention progress in -v
Conflicts:
transport.h
|
|
* ld/push-porcelain:
t5516: Use test_cmp when appropriate
git-push: add tests for git push --porcelain
git-push: make git push --porcelain print "Done"
git-push: send "To <remoteurl>" messages to the standard output in --porcelain mode
git-push: fix an advice message so it goes to stderr
Conflicts:
transport.c
|
|
* lt/deepen-builtin-source:
Move 'builtin-*' into a 'builtin/' subdirectory
Conflicts:
Makefile
|
|
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Nguyễn Thái Ngọc Duy
Matthieu Moy
Heiko Voigt
Christopher Tiwald
Felipe Contreras
Clemens Buchacher
Fredrik Gustafsson
Ævar Arnfjörð Bjarmason
Jeff King
Johan Herland
Jared Hance
Linus Torvalds