| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With multiple heads, we should not allow rebasing or fast-forwarding.
Make sure any fast-forward request calls out specifically the fact that
multiple branches are in play. Also, since we cannot fast-forward to
multiple branches, fix our computation of can_ff.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-pull.txt includes merge-options.txt, which is written assuming
merges will happen. git-pull has allowed rebases for many years; update
the documentation to reflect that.
While at it, pass any `--signoff` flag through to the rebase backend too
so that we don't have to document it as merge-specific. Rebase has
supported the --signoff flag for years now as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have for some time shown a long warning when the user does not
specify how to reconcile divergent branches with git pull. Make it an
error now.
Initial-patch-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the last few precedence tests failing in t7601 by now implementing
the logic to have --[no-]rebase override a pull.ff=only config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are both merge and rebase branches in the logic, and previously
both had to handle fast-forwarding. Merge handled that implicitly
(because git merge handles it directly), while in rebase it was
explicit. Given that the --ff-only flag is meant to override any
--rebase or --no-rebase, make the code reflect that by handling
--ff-only before the merge-vs-rebase logic.
It turns out that this also fixes a bug for submodules. Previously,
when --ff-only was given, the code would run `merge --ff-only` on the
main module, and then run `submodule update --recursive --rebase` on the
submodules. With this change, we still run `merge --ff-only` on the
main module, but now run `submodule update --recursive --checkout` on
the submodules. I believe this better reflects the intent of --ff-only
to have it apply to both the main module and the submodules.
(Sidenote: It is somewhat interesting that all merges pass `--checkout`
to submodule update, even when `--no-ff` is specified, meaning that it
will only do fast-forward merges for submodules. This was discussed in
commit a6d7eb2c7a ("pull: optionally rebase submodules (remote submodule
changes only)", 2017-06-23). The same limitations apply now as then, so
we are not trying to fix this at this time.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The warning about pulling without specifying how to reconcile divergent
branches says that after setting pull.rebase to true, --ff-only can
still be passed on the command line to require a fast-forward. Make that
actually work.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[en: updated tests; note 3 fixes and 1 new failure]
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two spaces unaligned to anything is not part of the coding-style. A
single tab is.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no need to store ran_ff. Now it's obvious from the conditionals.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently "git pull --rebase" takes a shortcut in the case a
fast-forward merge is possible; run_merge() is called with --ff-only.
However, "git merge" didn't have an --autostash option, so, when "git
pull --rebase --autostash" was called *and* the fast-forward merge
shortcut was taken, then the pull failed.
This was fixed in commit f15e7cf5cc (pull: ff --rebase --autostash
works in dirty repo, 2017-06-01) by simply skipping the fast-forward
merge shortcut.
Later on "git merge" learned the --autostash option [a03b55530a
(merge: teach --autostash option, 2020-04-07)], and so did "git pull"
[d9f15d37f1 (pull: pass --autostash to merge, 2020-04-07)].
Therefore it's not necessary to skip the fast-forward merge shortcut
anymore when called with --rebase --autostash.
Let's always take the fast-forward merge shortcut by essentially
reverting f15e7cf5cc.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no need to display the annoying warning on every pull... only
the ones that are not fast-forward.
The current warning tests still pass, but not because of the arguments
or the configuration, but because they are all fast-forward.
We need to test non-fast-forward situations now.
Suggestions-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the advise() call that teaches users how they can choose
between merge and rebase into a helper function. This revealed that
the caller's logic needs to be further clarified to allow future
actions (like "erroring out" instead of the current "go ahead and
merge anyway") that should happen whether the advice message is
squelched out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is easy enough to do, and gives a more descriptive name to the
variable that is scoped in a more focused way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eventually we want to be omit the advice when we can fast-forward
in which case there is no reason to require the user to choose
between rebase or merge.
In order to do so, we need to delay giving the advice up to the
point where we can check if we can fast-forward or not.
Additionally, config_get_rebase() was probably never its true home.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We would like to be able to make this check before the decision to
rebase is made in a future step. Besides, using a separate helper
makes the code easier to follow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pull --rebase --recurse-submodules" checked for local changes
in a wrong range and failed to run correctly when it should.
* pb/pull-rebase-recurse-submodules:
pull: check for local submodule modifications with the right range
t5572: describe '--rebase' tests a little more
t5572: add notes on a peculiar test
pull --rebase: compute rebase arguments in separate function
|
|
UI improvement.
* js/pull-rebase-use-advise:
pull: colorize the hint about setting `pull.rebase`
|
|
In d18c950a69f (pull: warn if the user didn't say whether to rebase or
to merge, 2020-03-09), a new hint was introduced to encourage users to
make a conscious decision about whether they want their pull to merge or
to rebase by configuring the `pull.rebase` setting.
This warning was clearly intended to advise users, but as pointed out in
https://lore.kernel.org/git/87ima2rdsm.fsf%40evledraar.gmail.com, it
uses `warning()` instead of `advise()`.
One consequence is that the advice is not colorized in the same manner
as other, similar messages. So let's use `advise()` instead.
Pointed-out-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since 'git pull' learned '--recurse-submodules' in a6d7eb2c7a
(pull: optionally rebase submodules (remote submodule changes only),
2017-06-23), we check if there are local submodule modifications by
checking the revision range 'curr_head --not rebase_fork_point'.
The goal of this check is to abort the pull if there are submodule
modifications in the local commits being rebased, since this scenario is
not supported.
However, the actual range of commits being rebased is not
'rebase_fork_point..curr_head', as the logic in
'get_rebase_newbase_and_upstream' reveals, it is 'upstream..curr_head'.
If the 'git merge-base --fork-point' invocation in
'get_rebase_fork_point' fails to find a fork point between the current
branch and the remote-tracking branch we are pulling from,
'rebase_fork_point' is null and since 4d36f88be7 (submodule: do not pass
null OID to setup_revisions, 2018-05-24), 'submodule_touches_in_range'
checks 'curr_head' and all its ancestors for submodule modifications.
Since it is highly likely that there are submodule modifications in this
range (which is in effect the whole history of the current branch), this
prevents 'git pull --rebase --recurse-submodules' from succeeding if no
fork point exists between the current branch and the remote-tracking
branch being pulled. This can happen, for example, when the current
branch was forked from a commit which was never recorded in the reflog
of the remote-tracking branch we are pulling, as the last two paragraphs
of the "Discussion on fork-point mode" section in git-merge-base(1)
explain.
Fix this bug by passing 'upstream' instead of 'rebase_fork_point' as the
'excl_oid' argument to 'submodule_touches_in_range'.
Reported-by: Brice Goglin <bgoglin@free.fr>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function 'run_rebase' is responsible for constructing the
command line to be passed to 'git rebase'. This includes both forwarding
pass-through options given to 'git pull' as well computing the <newbase>
and <upstream> arguments to 'git rebase'.
A following commit will need to access the <upstream> argument in
'cmd_pull' to fix a bug with 'git pull --rebase --recurse-submodules'.
In order to do so, refactor the code so that the <newbase> and
<upstream> commits are computed in a new, separate function,
'get_rebase_newbase_and_upstream'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425b (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a53 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier we taught "git pull" to warn when the user does not say the
histories need to be merged, rebased or accepts only fast-
forwarding, but the warning triggered for those who have set the
pull.ff configuration variable.
* ah/pull:
pull: don't warn if pull.ff has been set
|
|
A user who understands enough to set pull.ff does not need additional
instructions.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* cb/is-descendant-of:
commit-reach: avoid is_descendant_of() shim
|
|
Leakfix.
* rs/pull-leakfix:
pull: plug minor memory leak after using is_descendant_of()
|
|
d91d6fbf26 (commit-reach: create repo_is_descendant_of(), 2020-06-17)
adds a repository aware version of is_descendant_of() and a backward
compatibility shim that is barely used.
Update all callers to directly use the new repo_is_descendant_of()
function instead; making the codebase simpler and pushing more
the_repository references higher up the stack.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_pull() builds a commit_list to pass a single potential ancestor to
is_descendant_of(). The latter leaves the list intact. Release the
allocated memory after the call.
Leaking in cmd_*() isn't a big deal, but sets a bad example for other
users of is_descendant_of().
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* dl/opt-callback-cleanup:
Use OPT_CALLBACK and OPT_CALLBACK_F
|
|
"git merge" learns the "--autostash" option.
* dl/merge-autostash: (22 commits)
pull: pass --autostash to merge
t5520: make test_pull_autostash() accept expect_parent_num
merge: teach --autostash option
sequencer: implement apply_autostash_oid()
sequencer: implement save_autostash()
sequencer: unlink autostash in apply_autostash()
sequencer: extract perform_autostash() from rebase
rebase: generify create_autostash()
rebase: extract create_autostash()
reset: extract reset_head() from rebase
rebase: generify reset_head()
rebase: use apply_autostash() from sequencer.c
sequencer: rename stash_sha1 to stash_oid
sequencer: make apply_autostash() accept a path
rebase: use read_oneliner()
sequencer: make read_oneliner() extern
sequencer: configurably warn on non-existent files
sequencer: make read_oneliner() accept flags
sequencer: make file exists check more efficient
sequencer: stop leaking buf
...
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* jk/oid-array-cleanups:
oidset: stop referring to sha1-array
ref-filter: stop referring to "sha1 array"
bisect: stop referring to sha1_array
test-tool: rename sha1-array to oid-array
oid_array: rename source file from sha1-array
oid_array: use size_t for iteration
oid_array: use size_t for count and allocation
|
|
"git pull --rebase" tried to run a rebase even after noticing that
the pull results in a fast-forward and no rebase is needed nor
sensible, for the past few years due to a mistake nobody noticed.
* en/pull-do-not-rebase-after-fast-forwarding:
pull: avoid running both merge and rebase
|
|
"git pull" shares many options with underlying "git fetch", but
some of them were not documented and some of those that would make
sense to pass down were not passed down.
* rs/pull-options-sync-code-and-doc:
pull: pass documented fetch options on
pull: remove --update-head-ok from documentation
|
|
Before, `--autostash` only worked with `git pull --rebase`. However, in
the last patch, merge learned `--autostash` as well so there's no reason
why we should have this restriction anymore. Teach pull to pass
`--autostash` to merge, just like it did for rebase.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fetch options --deepen, --negotiation-tip, --server-option,
--shallow-exclude, and --shallow-since are documented for git pull as
well, but are not actually accepted by that command. Pass them on to
make the code match its documentation.
Reported-by: 天几 <muzimuzhi@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When opt_rebase is true, we still first check if we can fast-forward.
If the branch is fast-forwardable, then we can avoid the rebase and just
use merge to do the fast-forward logic. However, when commit a6d7eb2c7a
("pull: optionally rebase submodules (remote submodule changes only)",
2017-06-23) added the ability to rebase submodules it accidentally
caused us to run BOTH a merge and a rebase. Add a flag to avoid doing
both.
This was found when a user had both pull.rebase and rebase.autosquash
set to true. In such a case, the running of both merge and rebase would
cause ORIG_HEAD to be updated twice (and match HEAD at the end instead
of the commit before the rebase started), against expectation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Often novice Git users forget to say "pull --rebase" and end up with an
unnecessary merge from upstream. What they usually want is either "pull
--rebase" in the simpler cases, or "pull --ff-only" to update the copy
of main integration branches, and rebase their work separately. The
pull.rebase configuration variable exists to help them in the simpler
cases, but there is no mechanism to make these users aware of it.
Issue a warning message when no --[no-]rebase option from the command
line and no pull.rebase configuration variable is given. This will
inconvenience those who never want to "pull --rebase", who haven't had
to do anything special, but the cost of the inconvenience is paid only
once per user, which should be a reasonable cost to help a number of new
users.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
|
|
rebase types
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
"""
These are several similar status codes:
- TRUST_UNDEFINED <error_token>
- TRUST_NEVER <error_token>
- TRUST_MARGINAL [0 [<validation_model>]]
- TRUST_FULLY [0 [<validation_model>]]
- TRUST_ULTIMATE [0 [<validation_model>]]
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the --set-upstream option to git pull/fetch
which lets the user set the upstream configuration
(branch.<current-branch-name>.merge and
branch.<current-branch-name>.remote) for the current branch.
A typical use-case is:
git clone http://example.com/my-public-fork
git remote add main http://example.com/project-main-repo
git pull --set-upstream main master
or, instead of the last line:
git fetch --set-upstream main master
git merge # or git rebase
This is mostly equivalent to cloning project-main-repo (which sets
upsteam) and then "git remote add" my-public-fork, but may feel more
natural for people using a hosting system which allows forking from
the web UI.
This functionality is analog to "git push --set-upstream".
Signed-off-by: Corentin BOMPARD <corentin.bompard@etu.univ-lyon1.fr>
Signed-off-by: Nathan BERBEZIER <nathan.berbezier@etu.univ-lyon1.fr>
Signed-off-by: Pablo CHABANNE <pablo.chabanne@etu.univ-lyon1.fr>
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Patch-edited-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git fetch' command can avoid calculating forced updates, so
allow users of 'git pull' to provide that option. This is particularly
necessary when the advice to use '--no-show-forced-updates' is given
at the end of the command.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
|
|
This change allows git-merge messages to be cleaned up with the
commit.cleanup configuration or --cleanup option, just like how
git-commit does it.
We also give git-pull the option of --cleanup so that it can also take
advantage of this change.
Finally, add testing to ensure that messages are properly cleaned up.
Note that some newlines that were added to the commit message were
removed so that if a file were read via -F, it would be copied
faithfully.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using get_oid_hex and GIT_SHA1_HEXSZ, use parse_oid_hex to
avoid the need for a constant and simplify the code.
Additionally, fix some comments to refer to object IDs instead of SHA-1
and update a constant used to provide an allocation hint.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Alex Henrie
Felipe Contreras
Junio C Hamano
Johannes Schindelin
Philippe Blain
Bradley M. Kuhn
Jeff King
Carlo Marcelo Arenas Belón
René Scharfe
Denton Liu
Bert Wesarg
Hans Jerry Illikainen
Corentin BOMPARD
Derrick Stolee
brian m. carlson
Nguyễn Thái Ngọc Duy