| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In builtin.h, there exists the distinctly lib-ish function
prune_packed_objects(). This function can currently only be called by
built-in commands but, unlike all of the other functions in the header,
it does not make sense to impose this restriction as the functionality
can be logically reused in libgit.
Extract this function into prune-packed.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are no callers left of lookup_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables. It also
matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-prune command checks reachability by doing a traversal, and then
checking whether a given object exists in the global object hash. This
can yield false positives if any other part of the code had to create an
object struct for some reason. It's not clear whether this is even
possible, but it's more robust to rely on something a little more
concrete: the SEEN flag set by our traversal.
Note that there is a slight possibility of regression here, as we're
relying on mark_reachable_objects() to consistently set the flag.
However, it has always done so, and we're already relying on that fact
in prune_shallow(), which is called as part of git-prune. So this is
making these two parts of the prune operation more consistent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The general strategy of "git prune" is to do a full reachability walk,
then for each loose object see if we found it in our walk. But if we
don't have any loose objects, we don't need to do the expensive walk in
the first place.
This patch postpones that walk until the first time we need to see its
results.
Note that this is really a specific case of a more general optimization,
which is that we could traverse only far enough to find the object under
consideration (i.e., stop the traversal when we find it, then pick up
again when asked about the next object, etc). That could save us in some
instances from having to do a full walk. But it's actually a bit tricky
to do with our traversal code, and you'd need to do a full walk anyway
if you have even a single unreachable object (which you generally do, if
any objects are actually left after running git-repack).
So in practice this lazy-load of the full walk catches one easy but
common case (i.e., you've just repacked via git-gc, and there's nothing
unreachable).
The perf script is fairly contrived, but it does show off the
improvement:
Test HEAD^ HEAD
-------------------------------------------------------------------------
5304.4: prune with no objects 3.66(3.60+0.05) 0.00(0.00+0.00) -100.0%
and would let us know if we accidentally regress this optimization.
Note also that we need to take special care with prune_shallow(), which
relies on us having performed the traversal. So this optimization can
only kick in for a non-shallow repository. Since this is easy to get
wrong and is not covered by existing tests, let's add an extra test to
t5304 that covers this case explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* md/exclude-promisor-objects-fix-cleanup:
revision.c: put promisor option in specialized struct
|
|
Put the allow_exclude_promisor_objects flag in setup_revision_opt. When
it was in rev_info, it was unclear when it was used, since rev_info is
passed to functions that don't use the flag. This resulted in
unnecessary setting of the flag in prune.c, so fix that as well.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Operations on promisor objects make sense in the context of only a
small subset of the commands that internally use the revisions
machinery, but the "--exclude-promisor-objects" option were taken
and led to nonsense results by commands like "log", to which it
didn't make much sense. This has been corrected.
* md/exclude-promisor-objects-fix:
exclude-promisor-objects: declare when option is allowed
Documentation/git-log.txt: do not show --exclude-promisor-objects
|
|
"git repack" in a shallow clone did not correctly update the
shallow points in the repository, leading to a repository that
does not pass fsck.
* js/shallow-and-fetch-prune:
repack -ad: prune the list of shallow commits
shallow: offer to prune only non-existing entries
repack: point out a bug handling stale shallow info
|
|
The `prune_shallow()` function wants a full reachability check to be
completed before it goes to work, to ensure that all unreachable entries
are removed from the shallow file.
However, in the upcoming patch we do not even want to go that far. We
really only need to remove entries corresponding to pruned commits, i.e.
to commits that no longer exist.
Let's support that use case.
Rather than extending the signature of `prune_shallow()` to accept
another Boolean, let's turn it into a bit field and declare constants,
for readability.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --exclude-promisor-objects option causes some funny behavior in at
least two commands: log and blame. It causes a BUG crash:
$ git log --exclude-promisor-objects
BUG: revision.c:2143: exclude_promisor_objects can only be used
when fetch_if_missing is 0
Aborted
[134]
Fix this such that the option is treated like any other unknown option.
The commands that must support it are limited, so declare in those
commands that the flag is supported. In particular:
pack-objects
prune
rev-list
The commands were found by searching for logic which parses
--exclude-promisor-objects outside of revision.c. Extra logic outside of
revision.c is needed because fetch_if_missing must be turned on before
revision.c sees the option or it will BUG-crash. The above list is
supported by the fact that no other command is introspectively invoked
by another command passing --exclude-promisor-object.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
|
|
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_object to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of is_repository_shallow
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of oid_object_info
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names. Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:
@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)
@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid using identifiers that clash with C++ keywords. Even though
it is not a goal to compile Git with C++ compilers, changes like
this help use of code analysis tools that targets C++ on our
codebase.
* bw/c-plus-plus: (37 commits)
replace: rename 'new' variables
trailer: rename 'template' variables
tempfile: rename 'template' variables
wrapper: rename 'template' variables
environment: rename 'namespace' variables
diff: rename 'template' variables
environment: rename 'template' variables
init-db: rename 'template' variables
unpack-trees: rename 'new' variables
trailer: rename 'new' variables
submodule: rename 'new' variables
split-index: rename 'new' variables
remote: rename 'new' variables
ref-filter: rename 'new' variables
read-cache: rename 'new' variables
line-log: rename 'new' variables
imap-send: rename 'new' variables
http: rename 'new' variables
entry: rename 'new' variables
diffcore-delta: rename 'new' variables
...
|
|
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
|
|
Teach gc to stop traversal at promisor objects, and to leave promisor
packfiles alone. This has the effect of only repacking non-promisor
packfiles, and preserves the distinction between promisor packfiles and
non-promisor packfiles.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* rd/man-prune-progress:
prune: add "--progress" to man page and usage msg
|
|
Add mention of git prune's "--progress" option to the SYNOPSIS and
DESCRIPTION sections of the man page, and to the usage message of "git
prune" itself.
While we're here, move the explanation of "--" toward the end of the
DESCRIPTION section, where it belongs.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used to expose the full power of the delayed progress API to the
callers, so that they can specify, not just the message to show and
expected total amount of work that is used to compute the percentage
of work performed so far, the percent-threshold parameter P and the
delay-seconds parameter N. The progress meter starts to show at N
seconds into the operation only if we have not yet completed P per-cent
of the total work.
Most callers used either (0%, 2s) or (50%, 1s) as (P, N), but there
are oddballs that chose more random-looking values like 95%.
For a smoother workload, (50%, 1s) would allow us to start showing
the progress meter earlier than (0%, 2s), while keeping the chance
of not showing progress meter for long running operation the same as
the latter. For a task that would take 2s or more to complete, it
is likely that less than half of it would complete within the first
second, if the workload is smooth. But for a spiky workload whose
earlier part is easier, such a setting is likely to fail to show the
progress meter entirely and (0%, 2s) is more appropriate.
But that is merely a theory. Realistically, it is of dubious value
to ask each codepath to carefully consider smoothness of their
workload and specify their own setting by passing two extra
parameters. Let's simplify the API by dropping both parameters and
have everybody use (0%, 2s).
Oh, by the way, the percent-threshold parameter and the structure
member were consistently misspelled, which also is now fixed ;-)
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Optimize "what are the object names already taken in an alternate
object database?" query that is used to derive the length of prefix
an object name is uniquely abbreviated to.
* rs/sha1-name-readdir-optim:
sha1_file: guard against invalid loose subdirectory numbers
sha1_file: let for_each_file_in_obj_subdir() handle subdir names
p4205: add perf test script for pretty log formats
sha1_name: cache readdir(3) results in find_short_object_filename()
|
|
Loose object subdirectories have hexadecimal names based on the first
byte of the hash of contained objects, thus their numerical
representation can range from 0 (0x00) to 255 (0xff). Change the type
of the corresponding variable in for_each_file_in_obj_subdir() and
associated callback functions to unsigned int and add a range check.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
|
|
Make parse_object, parse_object_or_die, and parse_object_buffer take a
pointer to struct object_id. Remove the temporary variables inserted
earlier, since they are no longer necessary. Transform all of the
callers using the following semantic patch:
@@
expression E1;
@@
- parse_object(E1.hash)
+ parse_object(&E1)
@@
expression E1;
@@
- parse_object(E1->hash)
+ parse_object(E1)
@@
expression E1, E2;
@@
- parse_object_or_die(E1.hash, E2)
+ parse_object_or_die(&E1, E2)
@@
expression E1, E2;
@@
- parse_object_or_die(E1->hash, E2)
+ parse_object_or_die(E1, E2)
@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1.hash, E2, E3, E4, E5)
+ parse_object_buffer(&E1, E2, E3, E4, E5)
@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1->hash, E2, E3, E4, E5)
+ parse_object_buffer(E1, E2, E3, E4, E5)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the sole instance of unsigned char [20] to struct object_id.
cmd_prune is a caller of parse_object, which we will convert later.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert each_loose_object_fn and each_packed_object_fn to take a pointer
to struct object_id. Update the various callbacks. Convert several
40-based constants to use GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare for Git on-disk repository representation to undergo
backward incompatible changes by introducing a new repository
format version "1", with an extension mechanism.
* jk/repository-extension:
introduce "preciousObjects" repository extension
introduce "extensions" form of core.repositoryformatversion
|
|
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles
checking if the current branch was checked out elsewhere, when we
know we are not switching the branches ourselves.
* nd/multiple-work-trees:
worktree: new place for "git prune --worktrees"
checkout: don't check worktrees when not necessary
|
|
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
|
|
If this extension is used in a repository, then no
operations should run which may drop objects from the object
storage. This can be useful if you are sharing that storage
with other repositories whose refs you cannot see.
For instance, if you do:
$ git clone -s parent child
$ git -C parent config extensions.preciousObjects true
$ git -C parent config core.repositoryformatversion 1
you now have additional safety when running git in the
parent repository. Prunes and repacks will bail with an
error, and `git gc` will skip those operations (it will
continue to pack refs and do other non-object operations).
Older versions of git, when run in the repository, will
fail on every operation.
Note that we do not set the preciousObjects extension by
default when doing a "clone -s", as doing so breaks
backwards compatibility. It is a decision the user should
make explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
|
|
`git prune --worktrees` was pruning worktrees which were non-existent OR
expired, while it rather should prune those which are orphaned AND
expired, as git-checkout documentation describes. Fix it.
Add test 'not prune proper checkouts', which uses valid but expired
worktree.
Modify test 'not prune recent checkouts' to remove the worktree before
pruning - link in worktrees still must survive. In older form it is
useless because would pass always when the other test passes.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prune should know about broken objects at the tips of refs,
so that we can feed them to our traversal rather than
ignoring them. It's better for us to abort the operation on
the broken object than it is to start deleting objects with
an incomplete view of the reachability namespace.
Note that for missing objects, aborting is the best we can
do. For a badly-named ref, we technically could use its sha1
as a reachability tip. However, the iteration code just
feeds us a null sha1, so there would be a reasonable amount
of code involved to pass down our wishes. It's not really
worth trying to do better, because this is a case that
should happen extremely rarely, and the message we provide:
fatal: unable to parse object: refs/heads/bogus:name
is probably enough to point the user in the right direction.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
(alias R=$GIT_COMMON_DIR/worktrees/<id>)
- linked checkouts are supposed to keep its location in $R/gitdir up
to date. The use case is auto fixup after a manual checkout move.
- linked checkouts are supposed to update mtime of $R/gitdir. If
$R/gitdir's mtime is older than a limit, and it points to nowhere,
worktrees/<id> is to be pruned.
- If $R/locked exists, worktrees/<id> is not supposed to be pruned. If
$R/locked exists and $R/gitdir's mtime is older than a really long
limit, warn about old unused repo.
- "git checkout --to" is supposed to make a hard link named $R/link
pointing to the .git file on supported file systems to help detect
the user manually deleting the checkout. If $R/link exists and its
link count is greated than 1, the repo is kept.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our current strategy with prune is that an object falls into
one of three categories:
1. Reachable (from ref tips, reflogs, index, etc).
2. Not reachable, but recent (based on the --expire time).
3. Not reachable and not recent.
We keep objects from (1) and (2), but prune objects in (3).
The point of (2) is that these objects may be part of an
in-progress operation that has not yet updated any refs.
However, it is not always the case that objects for an
in-progress operation will have a recent mtime. For example,
the object database may have an old copy of a blob (from an
abandoned operation, a branch that was deleted, etc). If we
create a new tree that points to it, a simultaneous prune
will leave our tree, but delete the blob. Referencing that
tree with a commit will then work (we check that the tree is
in the object database, but not that all of its referred
objects are), as will mentioning the commit in a ref. But
the resulting repo is corrupt; we are missing the blob
reachable from a ref.
One way to solve this is to be more thorough when
referencing a sha1: make sure that not only do we have that
sha1, but that we have objects it refers to, and so forth
recursively. The problem is that this is very expensive.
Creating a parent link would require traversing the entire
object graph!
Instead, this patch pushes the extra work onto prune, which
runs less frequently (and has to look at the whole object
graph anyway). It creates a new category of objects: objects
which are not recent, but which are reachable from a recent
object. We do not prune these objects, just like the
reachable and recent ones.
This lets us avoid the recursive check above, because if we
have an object, even if it is unreachable, we should have
its referent. We can make a simple inductive argument that
with this patch, this property holds (that there are no
objects with missing referents in the repository):
0. When we have no objects, we have nothing to refer or be
referred to, so the property holds.
1. If we add objects to the repository, their direct
referents must generally exist (e.g., if you create a
tree, the blobs it references must exist; if you create
a commit to point at the tree, the tree must exist).
This is already the case before this patch. And it is
not 100% foolproof (you can make bogus objects using
`git hash-object`, for example), but it should be the
case for normal usage.
Therefore for any sequence of object additions, the
property will continue to hold.
2. If we remove objects from the repository, then we will
not remove a child object (like a blob) if an object
that refers to it is being kept. That is the part
implemented by this patch.
Note, however, that our reachability check and the
actual pruning are not atomic. So it _is_ still
possible to violate the property (e.g., an object
becomes referenced just as we are deleting it). This
patch is shooting for eliminating problems where the
mtimes of dependent objects differ by hours or days,
and one is dropped without the other. It does nothing
to help with short races.
Naively, the simplest way to implement this would be to add
all recent objects as tips to the reachability traversal.
However, this does not perform well. In a recently-packed
repository, all reachable objects will also be recent, and
therefore we have to look at each object twice. This patch
instead performs the reachability traversal, then follows up
with a second traversal for recent objects, skipping any
that have already been marked.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prune has to walk $GIT_DIR/objects/?? in order to find the
set of loose objects to prune. Other parts of the code
(e.g., count-objects) want to do the same. Let's factor it
out into a reusable for_each-style function.
Note that this is not quite a straight code movement. The
original code had strange behavior when it found a file of
the form "[0-9a-f]{2}/.{38}" that did _not_ contain all hex
digits. It executed a "break" from the loop, meaning that we
stopped pruning in that directory (but still pruned other
directories!). This was probably a bug; we do not want to
process the file as an object, but we should keep going
otherwise (and that is how the new code handles it).
We are also a little more careful with loose object
directories which fail to open. The original code silently
ignored any failures, but the new code will complain about
any problems besides ENOENT.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mh/replace-refs-variable-rename:
Document some functions defined in object.c
Add docstrings for lookup_replace_object() and do_lookup_replace_object()
rename read_replace_refs to check_replace_refs
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The semantics of this flag was changed in commit
e1111cef23 inline lookup_replace_object() calls
but wasn't renamed at the time to minimize code churn. Rename it now,
and add a comment explaining its use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
|
|
A few places where we relied on a fixed length buffer to hold
pathnames in these two programs have been converted to use strbuf.
* mh/path-max:
builtin/prune.c: use strbuf to avoid having to worry about PATH_MAX
prune-packed: use strbuf to avoid having to worry about PATH_MAX
|
|
While at it, rename prune_tmp_object(), which used to be a helper to
remove temporary files that were created to become loose object
files, to prune_tmp_file(), as the function is also used to remove
any random cruft whose name begins with tmp_ directly in .git/object
or .git/object/pack directories these days.
Noticed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch teaches "prune" to remove shallow roots that are no longer
reachable from any refs (e.g. when the relevant refs are removed).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Denton Liu
Jeff King
Junio C Hamano
Matthew DeVore
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Stefan Beller
brian m. carlson
Brandon Williams
Jonathan Tan
Robert P. J. Day
René Scharfe
Max Kirillov
Michael Haggerty
Christian Couder