| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code clean-up.
* ds/partial-bundle-more:
pack-objects: lazily set up "struct rev_info", don't leak
bundle: output hash information in 'verify'
bundle: move capabilities to end of 'verify'
pack-objects: parse --filter directly into revs.filter
pack-objects: move revs out of get_object_list()
list-objects-filter: remove CL_ARG__FILTER
|
|
In the preceding [1] (pack-objects: move revs out of
get_object_list(), 2022-03-22) the "repo_init_revisions()" was moved
to cmd_pack_objects() so that it unconditionally took place for all
invocations of "git pack-objects".
We'd thus start leaking memory, which is easily reproduced in
e.g. git.git by feeding e83c5163316 (Initial revision of "git", the
information manager from hell, 2005-04-07) to "git pack-objects";
$ echo e83c5163316f89bfbde7d9ab23ca2e25604af290 | ./git pack-objects initial
[...]
==19130==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7120 byte(s) in 1 object(s) allocated from:
#0 0x455308 in __interceptor_malloc (/home/avar/g/git/git+0x455308)
#1 0x75b399 in do_xmalloc /home/avar/g/git/wrapper.c:41:8
#2 0x75b356 in xmalloc /home/avar/g/git/wrapper.c:62:9
#3 0x5d7609 in prep_parse_options /home/avar/g/git/diff.c:5647:2
#4 0x5d415a in repo_diff_setup /home/avar/g/git/diff.c:4621:2
#5 0x6dffbb in repo_init_revisions /home/avar/g/git/revision.c:1853:2
#6 0x4f599d in cmd_pack_objects /home/avar/g/git/builtin/pack-objects.c:3980:2
#7 0x4592ca in run_builtin /home/avar/g/git/git.c:465:11
#8 0x457d81 in handle_builtin /home/avar/g/git/git.c:718:3
#9 0x458ca5 in run_argv /home/avar/g/git/git.c:785:4
#10 0x457b40 in cmd_main /home/avar/g/git/git.c:916:19
#11 0x562259 in main /home/avar/g/git/common-main.c:56:11
#12 0x7fce792ac7ec in __libc_start_main csu/../csu/libc-start.c:332:16
#13 0x4300f9 in _start (/home/avar/g/git/git+0x4300f9)
SUMMARY: LeakSanitizer: 7120 byte(s) leaked in 1 allocation(s).
Aborted
Narrowly fixing that commit would have been easy, just add call
repo_init_revisions() right before get_object_list(), which is
effectively what was done before that commit.
But an unstated constraint when setting it up early is that it was
needed for the subsequent [2] (pack-objects: parse --filter directly
into revs.filter, 2022-03-22), i.e. we might have a --filter
command-line option, and need to either have the "struct rev_info"
setup when we encounter that option, or later.
Let's just change the control flow so that we'll instead set up the
"struct rev_info" only when we need it. Doing so leads to a bit more
verbosity, but it's a lot clearer what we're doing and why.
An earlier version of this commit[3] went behind
opt_parse_list_objects_filter()'s back by faking up a "struct option"
before calling it. Let's avoid that and instead create a blessed API
for this pattern.
We could furthermore combine the two get_object_list() invocations
here by having repo_init_revisions() invoked on &pfd.revs, but I think
clearly separating the two makes the flow clearer. Likewise
redundantly but explicitly (i.e. redundant v.s. a "{ 0 }") "0" to
"have_revs" early in cmd_pack_objects().
While we're at it add parentheses around the arguments to the OPT_*
macros in in list-objects-filter-options.h, as we need to change those
lines anyway. It doesn't matter in this case, but is good general
practice.
1. https://lore.kernel.org/git/619b757d98465dbc4995bdc11a5282fbfcbd3daa.1647970119.git.gitgitgadget@gmail.com
2. https://lore.kernel.org/git/97de926904988b89b5663bd4c59c011a1723a8f5.1647970119.git.gitgitgadget@gmail.com
3. https://lore.kernel.org/git/patch-1.1-193534b0f07-20220325T121715Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace core.fsyncObjectFiles with two new configuration variables,
core.fsync and core.fsyncMethod.
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
|
|
The previous change moved the 'revs' variable into cmd_pack_objects()
and now we can remove the global filter_options in favor of revs.filter.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We intend to parse the --filter option directly into revs.filter, but we
first need to move the 'revs' variable out of get_object_list() and pass
it as a pointer instead. This change only deals with the issues of
making that work.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bundle file format gets extended to allow a partial bundle,
filtered by similar criteria you would give when making a
partial/lazy clone.
* ds/partial-bundles:
clone: fail gracefully when cloning filtered bundle
bundle: unbundle promisor packs
bundle: create filtered bundles
rev-list: move --filter parsing into revision.c
bundle: parse filter capability
list-objects: handle NULL function pointers
MyFirstObjectWalk: update recommended usage
list-objects: consolidate traverse_commit_list[_filtered]
pack-bitmap: drop filter in prepare_bitmap_walk()
pack-objects: use rev.filter when possible
revision: put object filter into struct rev_info
list-objects-filter-options: create copy helper
index-pack: document and test the --promisor option
|
|
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
|
|
This commit introduces the infrastructure for the core.fsync
configuration knob. The repository components we want to sync
are identified by flags so that we can turn on or off syncing
for specific components.
If core.fsyncObjectFiles is set and the core.fsync configuration
also includes FSYNC_COMPONENT_LOOSE_OBJECT, we will fsync any
loose objects. This picks the strictest data integrity behavior
if core.fsync and core.fsyncObjectFiles are set to conflicting values.
This change introduces the currently unused fsync_component
helper, which will be used by a later patch that adds fsyncing to
the refs backend.
Actual configuration and documentation of the fsync components
list are in other patches in the series to separate review of
the underlying mechanism from the policy of how it's configured.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that all consumers of traverse_commit_list_filtered() populate the
'filter' member of 'struct rev_info', we can drop that parameter from
the method prototype to simplify things. In addition, the only thing
different now between traverse_commit_list_filtered() and
traverse_commit_list() is the presence of the 'omitted' parameter, which
is only non-NULL for one caller. We can consolidate these two methods by
having one call the other and use the simpler form everywhere the
'omitted' parameter would be NULL.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that all consumers of prepare_bitmap_walk() have populated the
'filter' member of 'struct rev_info', we can drop that extra parameter
from the method and access it directly from the 'struct rev_info'.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In builtin/pack-objects.c, we use a 'filter_options' global to populate
the --filter=<X> argument. The previous change created a pointer to a
filter option in 'struct rev_info', so we can use that pointer here as a
start to simplifying some usage of object filters.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the read_object_with_reference() function to take an "enum
object_type". It was not prepared to handle an arbitrary "const
char *type", as it was itself calling type_from_string().
Let's change the only caller that passes in user data to use
type_from_string(), and convert the rest to use e.g. "OBJ_TREE"
instead of "tree_type".
The "cat-file" caller is not on the codepath that
handles"--allow-unknown", so the type_from_string() there is safe. Its
use of type_from_string() doesn't functionally differ from that of the
pre-image.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
|
|
When we taught these commands about the sparse index, we did not account
for the fact that the `cmd_*()` functions _can_ be called without a
gitdir, namely when `-h` is passed to show the usage.
A plausible approach to address this is to move the
`prepare_repo_settings()` calls right after the `parse_options()` calls:
The latter will never return when it handles `-h`, and therefore it is
safe to assume that we have a `gitdir` at that point, as long as the
built-in is marked with the `RUN_SETUP` flag.
However, it is unfortunately not that simple. In `cmd_pack_objects()`,
for example, the repo settings need to be fully populated so that the
command-line options `--sparse`/`--no-sparse` can override them, not the
other way round.
Therefore, we choose to imitate the strategy taken in `cmd_diff()`,
where we simply do not bother to prepare and initialize the repo
settings unless we have a `gitdir`.
This fixes https://github.com/git-for-windows/git/issues/3688
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the same message when an invalid value is passed to a command line
option or a configuration variable.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ab/die-with-bug:
object.c: use BUG(...) no die("BUG: ...") in lookup_object_by_type()
pathspec: use BUG(...) not die("BUG:%s:%d....", <file>, <line>)
strbuf.h: use BUG(...) not die("BUG: ...")
pack-objects: use BUG(...) not die("BUG: ...")
|
|
Change this code added in da93d12b004 (pack-objects: be incredibly
anal about stdio semantics, 2006-04-02) to use BUG() instead.
See 1a07e59c3e2 (Update messages in preparation for i18n, 2018-07-21)
for when the "BUG: " prefix was added, and [1] for background on the
Solaris behavior that prompted the exhaustive error checking in this
fgets() loop.
1. https://lore.kernel.org/git/824.1144007555@lotus.CS.Berkeley.EDU/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When constructing arguments to pass to setup_revision(), pack-objects
only frees the memory used by that array after calling
get_object_list().
Ensure that we call strvec_clear() whether or not we use the arguments
array by cleaning up whenever we exit the function (and rewriting one
early return to jump to a label which frees the memory and then
returns).
We could avoid setting this array up altogether unless we are in the
if-else block that calls get_object_list(), but setting up the argument
array is intermingled with lots of other side-effects, e.g.:
if (exclude_promisor_objects) {
use_internal_rev_list = 1;
fetch_if_missing = 0;
strvec_push(&rp, "--exclude-promisor-objects");
}
So it would be awkward to check exclude_promisor_objects twice: first to
set use_internal_rev_list and fetch_if_missing, and then again above
get_object_list() to push the relevant argument onto the array.
Instead, leave the array's construction alone and make sure to free it
unconditionally.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
|
|
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
|
|
In preceding commits the race of renaming .idx files in place before
.rev files and other auxiliary files was fixed in pack-write.c's
finish_tmp_packfile(), builtin/repack.c's "struct exts", and
builtin/index-pack.c's final(). As noted in the change to pack-write.c
we left in place the issue of writing *.bitmap files after the *.idx,
let's fix that issue.
See 7cc8f971085 (pack-objects: implement bitmap writing, 2013-12-21)
for commentary at the time when *.bitmap was implemented about how
those files are written out, nothing in that commit contradicts what's
being done here.
Note that this commit and preceding ones only close any race condition
with *.idx files being written before their auxiliary files if we're
optimistic about our lack of fsync()-ing in this are not tripping us
over. See the thread at [1] for a rabbit hole of various discussions
about filesystem races in the face of doing and not doing fsync() (and
if doing fsync(), not doing it properly).
We may want to fsync the containing directory once after renaming the
*.idx file into place, but that is outside the scope of this series.
1. https://lore.kernel.org/git/8735qgkvv1.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split up the finish_tmp_packfile() function and use the split-up version
in pack-objects.c in preparation for moving the step of renaming the
*.idx file later as part of a function change.
Since the only other caller of finish_tmp_packfile() was in
bulk-checkin.c, and it won't be needing a change to its *.idx renaming,
provide a thin wrapper for the old function as a static function in that
file. If other callers end up needing the simpler version it could be
moved back to "pack-write.c" and "pack.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the renaming in finish_tmp_packfile() into a helper function.
The callers are now expected to pass a "name_buffer" ending in
"pack-OID." instead of the previous "pack-", we then append "pack",
"idx" or "rev" to it.
By doing the strbuf_setlen() in rename_tmp_packfile() we reuse the
buffer and avoid the repeated allocations we'd get if that function had
its own temporary "struct strbuf".
This approach of reusing the buffer does make the last user in
pack-object.c's write_pack_file() slightly awkward, since we needlessly
do a strbuf_setlen() before calling strbuf_release() for consistency. In
subsequent changes we'll move that bitmap writing code around, so let's
not skip the strbuf_setlen() now.
The previous strbuf_reset() idiom originated with 5889271114a
(finish_tmp_packfile():use strbuf for pathname construction,
2014-03-03), which in turn was a minimal adjustment of pre-strbuf code
added in 0e990530ae (finish_tmp_packfile(): a helper function,
2011-10-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This prepares the code in pack-bitmap to interpret the new multi-pack
bitmaps described in Documentation/technical/bitmap-format.txt, which
mostly involves converting bit positions to accommodate looking them up
in a MIDX.
Note that there are currently no writers who write multi-pack bitmaps,
and that this will be implemented in the subsequent commit. Note also
that get_midx_checksum() and get_midx_filename() are made non-static so
they can be called from pack-bitmap.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the original code from 08cdfb1337 (pack-objects --keep-unreachable,
2007-09-16), we add each object to the packing list with type
`obj->type`, where `obj` comes from `lookup_unknown_object()`. Unless we
had already looked up and parsed the object, this will be `OBJ_NONE`.
That's fine, since oe_set_type() sets the type_valid bit to '0', and we
determine the real type later on.
So the only thing we need from the object lookup is access to the
`flags` field so that we can mark that we've added the object with
`OBJECT_ADDED` to avoid adding it again (we can just pass `OBJ_NONE`
directly instead of grabbing it from the object).
But add_object_entry() already rejects duplicates! This has been the
behavior since 7a979d99ba (Thin pack - create packfile with missing
delta base., 2006-02-19), but 08cdfb1337 didn't take advantage of it.
Moreover, to do the OBJECT_ADDED check, we have to do a hash lookup in
`obj_hash`.
So we can drop the lookup_unknown_object() call completely, *and* the
OBJECT_ADDED flag, too, since the spot we're touching here is the only
location that checks it.
In the end, we perform the same number of hash lookups, but with the
added bonus that we don't waste memory allocating an OBJ_NONE object (if
we were traversing, we'd need it eventually, but the whole point of this
code path is not to traverse).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is used to implement `pack-objects`'s `--keep-unreachable`
option, but can be simplified in a couple of ways:
- add_objects_in_unpacked_packs() iterates over all packs (and then
all packed objects) itself, but could use for_each_packed_object()
instead since the missing flags necessary were added in the previous
commit
- objects are added to an in_pack array which store (off_t, object)
tuples, and then sorted in offset order when we could iterate
objects in offset order.
There is a slight behavior change here: before we would have added
objects in sorted offset order among _all_ packs. Handing objects to
create_object_entry() in pack order for each pack (instead of
feeding objects from all packs simultaneously their offset relative
to different packs) is much more reasonable, if different than how
the code currently works.
- objects in a single pack are iterated in index order and searched
for in order to discover their offsets, which is much less efficient
than using the on-disk reverse index
Simplify the function by addressing each of the above and moving the
core of the loop into a callback function that we then pass to
for_each_packed_object() instead of open-coding the latter function
ourselves.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The set of objects covered by a bitmap must be closed under
reachability, since it must be the case that there is a valid bit
position assigned for every possible reachable object (otherwise the
bitmaps would be incomplete).
Pack bitmaps are never written from 'git repack' unless repacking
all-into-one, and so we never write non-closed bitmaps (except in the
case of partial clones where we aren't guaranteed to have all objects).
But multi-pack bitmaps change this, since it isn't known whether the
set of objects in the MIDX is closed under reachability until walking
them. Plumb through a bit that is set when a reachable object isn't
found.
As soon as a reachable object isn't found in the set of objects to
include in the bitmap, bitmap_writer_build() knows that the set is not
closed, and so it now fails gracefully.
A test is added in t0410 to trigger a bitmap write without full
reachability closure by removing local copies of some reachable objects
from a promisor remote.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a segfault in the --stdin-packs option added in
339bce27f4f (builtin/pack-objects.c: add '--stdin-packs' option,
2021-02-22).
The read_packs_list_from_stdin() function didn't check that the lines
it was reading were valid packs, and thus when doing the QSORT() with
pack_mtime_cmp() we'd have a NULL "util" field. The "util" field is
used to associate the names of included/excluded packs with the
packed_git structs they correspond to.
The logic error was in assuming that we could iterate all packs and
annotate the excluded and included packs we got, as opposed to
checking the lines we got on stdin. There was a check for excluded
packs, but included packs were simply assumed to be valid.
As noted in the test we'll not report the first bad line, but whatever
line sorted first according to the string-list.c API. In this case I
think that's fine. There was further discussion of alternate
approaches in [1].
Even though we're being lazy let's assert the line we do expect to get
in the test, since whoever changes this code in the future might miss
this case, and would want to update the test and comments.
1. http://lore.kernel.org/git/YND3h2l10PlnSNGJ@nand.local
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"ld" on Solaris fails to link some test helpers, which has been
worked around by reshuffling the inline function definitions from a
header file to a source file that is the only user of them.
* ab/pack-linkage-fix:
pack-objects: move static inline from a header to the sole consumer
|
|
Move the code that is only used in builtin/pack-objects.c out of
pack-objects.h.
This fixes an issue where Solaris's SunCC hasn't been able to compile
git since 483fa7f42d9 (t/helper/test-bitmap.c: initial commit,
2021-03-31).
The real origin of that issue is that in 898eba5e630 (pack-objects:
refer to delta objects by index instead of pointer, 2018-04-14)
utility functions only needed by builtin/pack-objects.c were added to
pack-objects.h. Since then the header has been used in a few other
places, but 483fa7f42d9 was the first time it was used by test helper.
Since Solaris is stricter about linking and the oe_get_size_slow()
function lives in builtin/pack-objects.c the build started failing
with:
Undefined first referenced
symbol in file
oe_get_size_slow t/helper/test-bitmap.o
ld: fatal: symbol referencing errors. No output written to t/helper/test-tool
On other platforms this is presumably OK because the compiler and/or
linker detects that the "static inline" functions that reference
oe_get_size_slow() aren't used.
Let's solve this by moving the relevant code from pack-objects.h to
builtin/pack-objects.c. This is almost entirely a code-only move, but
because of the early macro definitions in that file referencing some
of these inline functions we need to move the definition of "static
struct packing_data to_pack" earlier, and declare these inline
functions above the macros.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Options to "git pack-objects" that take numeric values like
--window and --depth should not accept negative values; the input
validation has been tightened.
* jk/pack-objects-negative-options-fix:
pack-objects: clamp negative depth to 0
t5316: check behavior of pack-objects --depth=0
pack-objects: clamp negative window size to 0
t5300: check that we produced expected number of deltas
t5300: modernize basic tests
|
|
"git repack -A -d" in a partial clone unnecessarily loosened
objects in promisor pack.
* rs/repack-without-loosening-promised-objects:
repack: avoid loosening promisor objects in partial clones
|
|
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
|
|
"git rev-list" learns the "--filter=object:type=<type>" option,
which can be used to exclude objects of the given kind from the
packfile generated by pack-objects.
* ps/rev-list-object-type-filter:
rev-list: allow filtering of provided items
pack-bitmap: implement combined filter
pack-bitmap: implement object type filter
list-objects: implement object type filter
list-objects: support filtering by tag and commit
list-objects: move tag processing into its own function
revision: mark commit parents as NOT_USER_GIVEN
uploadpack.txt: document implication of `uploadpackfilter.allow`
|
|
A negative delta depth makes no sense, and the code is not prepared to
handle it. If passed "--depth=-1" on the command line, then this line
from break_delta_chains():
cur->depth = (total_depth--) % (depth + 1);
triggers a divide-by-zero. This is undefined behavior according to the C
standard, but on POSIX systems results in SIGFPE killing the process.
This is certainly one way to inform the use that the command was
invalid, but it's a bit friendlier to just treat it as "don't allow any
deltas", which we already do for --depth=0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A negative window size makes no sense, and the code in find_deltas() is
not prepared to handle it. If you pass "-1", for example, we end up
generate a 0-length array of "struct unpacked", but our loop assumes it
has at least one entry in it (and we end up reading garbage memory).
We could complain to the user about this, but it's more forgiving to
just clamp it to 0, which means "do not find any deltas at all". The
0-case is already tested earlier in the script, so we'll make sure this
does the same thing.
Reported-by: Yiyuan guo <yguoaz@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Handling of "promisor packs" that allows certain objects to be
missing and lazily retrievable has been optimized (a bit).
* jk/promisor-optim:
revision: avoid parsing with --exclude-promisor-objects
lookup_unknown_object(): take a repository argument
is_promisor_object(): free tree buffer after parsing
|
|
When `git repack -A -d` is run in a partial clone, `pack-objects`
is invoked twice: once to repack all promisor objects, and once to
repack all non-promisor objects. The latter `pack-objects` invocation
is with --exclude-promisor-objects and --unpack-unreachable, which
loosens all objects unused during this invocation. Unfortunately,
this includes promisor objects.
Because the -d argument to `git repack` subsequently deletes all loose
objects also in packs, these just-loosened promisor objects will be
immediately deleted. However, this extra disk churn is unnecessary in
the first place. For example, in a newly-cloned partial repo that
filters all blob objects (e.g. `--filter=blob:none`), `repack` ends up
unpacking all trees and commits into the filesystem because every
object, in this particular case, is a promisor object. Depending on
the repo size, this increases the disk usage considerably: In my copy
of the linux.git, the object directory peaked 26GB of more disk usage.
In order to avoid this extra disk churn, pass the names of the promisor
packfiles as --keep-pack arguments to the second invocation of
`pack-objects`. This informs `pack-objects` that the promisor objects
are already in a safe packfile and, therefore, do not need to be
loosened.
For testing, we need to validate whether any object was loosened.
However, the "evidence" (loosened objects) is deleted during the
process which prevents us from inspecting the object directory.
Instead, let's teach `pack-objects` to count loosened objects and
emit via trace2 thus allowing inspecting the debug events after the
process is finished. This new event is used on the added regression
test.
Lastly, add a new perf test to evaluate the performance impact
made by this changes (tested on git.git):
Test HEAD^ HEAD
----------------------------------------------------------
5600.3: gc 134.38(41.93+90.95) 7.80(6.72+1.35) -94.2%
For a bigger repository, such as linux.git, the improvement is
even bigger:
Test HEAD^ HEAD
-------------------------------------------------------------------
5600.3: gc 6833.00(918.07+3162.74) 268.79(227.02+39.18) -96.1%
These improvements are particular big because every object in the
newly-cloned partial repository is a promisor object.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use struct object_id for the names of objects. It isn't intended to
be used for other hash values that don't name objects such as the pack
hash.
Because struct object_id will soon need to have its algorithm member
set, using it in this code path would mean that we didn't set that
member, only the hash member, which would result in a crash. For both
of these reasons, switch to using an unsigned char array of size
GIT_MAX_RAWSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git pack-objects" makes a literal copy of a part of existing
packfile using the reachability bitmaps, its update to the progress
meter was broken.
* jk/pack-objects-bitmap-progress-fix:
pack-objects: update "nr_seen" progress based on pack-reused count
|
|
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When serving a clone or fetch with bitmaps, after deciding which objects
need to be sent our "pack reuse" mechanism kicks in: we try to send
more-or-less verbatim a bunch of objects from the beginning of the
bitmapped packfile without even adding them to the to_pack.objects
array.
After deciding which objects will be in the "reused" portion, we update
nr_result to account for those, and then trigger display_progress() to
show the user (who is undoubtedly dazzled that we managed to enumerate
so many objects so quickly).
But then something confusing happens: the "Enumerating objects" progress
meter jumps _backwards_, counting up from zero the number of objects we
actually add into to_pack.objects.
This worked correctly once upon a time, but was broken in 5af050437a
(pack-objects: show some progress when counting kept objects,
2018-04-15), when the latter half of that progress meter switched to
using a separate nr_seen counter, rather than nr_result. Nobody noticed
for two reasons:
- prior to the pack-reuse fixes from a14aebeac3 (Merge branch
'jk/packfile-reuse-cleanup', 2020-02-14), the reuse code almost
never kicked in anyway
- the output looks _kind of_ correct. The "backwards" moment is hard
to catch, because we overwrite the old progress number with the new
one, and the larger number is displayed only for a second. So unless
you look at that exact second, you just see the much smaller value,
counting up to the number of non-reused objects (though of course if
you catch it in stderr, or look at GIT_TRACE_PACKET from a server
with bitmaps, you can see both values).
This smaller output isn't wrong per se, but isn't counting what we ever
intended to. We should give the user the whole number of objects we
considered (which, as per 5af050437a's original purpose, is already
_not_ a count of what goes into to_pack.objects). The follow-on
"Counting objects" meter shows the actual number of objects we feed into
that array.
We can easily fix this by bumping (and showing) nr_seen for the
pack-reused objects. When the included test is run without this patch,
the second pack-objects invocation produces "Enumerating objects: 1" to
show the one loose object, even though the resulting pack has hundreds
of objects in it. With it, we jump to "Enumerating objects: 674" after
deciding on reuse, and then "675" when we add in the loose object.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing a new pack with a bitmap, it is sometimes convenient to
indicate some reference prefixes which should receive priority when
selecting which commits to receive bitmaps.
A truly motivated caller could accomplish this by setting
'pack.islandCore', (since all commits in the core island are similarly
marked as preferred) but this requires callers to opt into using delta
islands, which they may or may not want to do.
Introduce a new multi-valued configuration, 'pack.preferBitmapTips' to
allow callers to specify a list of reference prefixes. All references
which have a prefix contained in 'pack.preferBitmapTips' will mark their
tips as "preferred" in the same way as commits are marked as preferred
for selection by 'pack.islandCore'.
The choice of the verb "prefer" is intentional: marking the NEEDS_BITMAP
flag on an object does *not* guarantee that that object will receive a
bitmap. It merely guarantees that that commit will receive a bitmap over
any *other* commit in the same window by bitmap_writer_select_commits().
The test this patch adds reflects this quirk, too. It only tests that
a commit (which didn't receive bitmaps by default) is selected for
bitmaps after changing the value of 'pack.preferBitmapTips' to include
it. Other commits may lose their bitmaps as a byproduct of how the
selection process works (bitmap_writer_select_commits() ignores the
remainder of a window after seeing a commit with the NEEDS_BITMAP flag).
This configuration will aide in selecting important references for
multi-pack bitmaps, since they do not respect the same pack.islandCore
configuration. (They could, but doing so may be confusing, since it is
packs--not bitmaps--which are influenced by the delta-islands
configuration).
In a fork network repository (one which lists all forks of a given
repository as remotes), for example, it is useful to set
pack.preferBitmapTips to 'refs/remotes/<root>/heads' and
'refs/remotes/<root>/tags', where '<root>' is an opaque identifier
referring to the repository which is at the base of the fork chain.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comment update.
* hx/pack-objects-chunk-comment:
pack-objects: fix comment of reused_chunk.difference
|
|
"git repack" so far has been only capable of repacking everything
under the sun into a single pack (or split by size). A cleverer
strategy to reduce the cost of repacking a repository has been
introduced.
* tb/geometric-repack:
builtin/pack-objects.c: ignore missing links with --stdin-packs
builtin/repack.c: reword comment around pack-objects flags
builtin/repack.c: be more conservative with unsigned overflows
builtin/repack.c: assign pack split later
t7703: test --geometric repack with loose objects
builtin/repack.c: do not repack single packs with --geometric
builtin/repack.c: add '--geometric' option
packfile: add kept-pack cache for find_kept_pack_entry()
builtin/pack-objects.c: rewrite honor-pack-keep logic
p5303: measure time to repack with keep
p5303: add missing &&-chains
builtin/pack-objects.c: add '--stdin-packs' option
revision: learn '--no-kept-objects'
packfile: introduce 'find_kept_pack_entry()'
|
|
As record_reused_object(offset, offset - hashfile_total(out)) said,
reused_chunk.difference should be the offset of original packfile minus
the offset of the generated packfile. But the comment presented an opposite way.
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git pack-objects --stdin-packs' encounters a commit in a pack, it
marks it as a starting point of a best-effort reachability traversal
that is used to populate the name-hash of the objects listed in the
given packs.
The traversal expects that it should be able to walk the ancestors of
all commits in a pack without issue. Ordinarily this is the case, but it
is possible to having missing parents from an unreachable part of the
repository. In that case, we'd consider any missing objects in the
unreachable portion of the graph to be junk.
This should be handled gracefully: since the traversal is best-effort
(i.e., we don't strictly need to fill in all of the name-hash fields),
we should simply ignore any missing links.
This patch does that (by setting the 'ignore_missing_links' bit on the
rev_info struct), and ensures we don't regress in the future by adding a
test which demonstrates this case.
It is a little over-eager, since it will also ignore missing links in
reachable parts of the packs (which would indicate a corrupted
repository), but '--stdin-packs' is explicitly *not* about reachability.
So this step isn't making anything worse for a repository which contains
packs missing reachable objects (since we never drop objects with
'--stdin-packs').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Derrick Stolee
Neeraj Singh
Johannes Schindelin
Jean-Noël Avila
Taylor Blau
Jeff King
Rafael Silva
brian m. carlson
Patrick Steinhardt
Han Xin
René Scharfe