| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"ld" on Solaris fails to link some test helpers, which has been
worked around by reshuffling the inline function definitions from a
header file to a source file that is the only user of them.
* ab/pack-linkage-fix:
pack-objects: move static inline from a header to the sole consumer
|
|
Move the code that is only used in builtin/pack-objects.c out of
pack-objects.h.
This fixes an issue where Solaris's SunCC hasn't been able to compile
git since 483fa7f42d9 (t/helper/test-bitmap.c: initial commit,
2021-03-31).
The real origin of that issue is that in 898eba5e630 (pack-objects:
refer to delta objects by index instead of pointer, 2018-04-14)
utility functions only needed by builtin/pack-objects.c were added to
pack-objects.h. Since then the header has been used in a few other
places, but 483fa7f42d9 was the first time it was used by test helper.
Since Solaris is stricter about linking and the oe_get_size_slow()
function lives in builtin/pack-objects.c the build started failing
with:
Undefined first referenced
symbol in file
oe_get_size_slow t/helper/test-bitmap.o
ld: fatal: symbol referencing errors. No output written to t/helper/test-tool
On other platforms this is presumably OK because the compiler and/or
linker detects that the "static inline" functions that reference
oe_get_size_slow() aren't used.
Let's solve this by moving the relevant code from pack-objects.h to
builtin/pack-objects.c. This is almost entirely a code-only move, but
because of the early macro definitions in that file referencing some
of these inline functions we need to move the definition of "static
struct packing_data to_pack" earlier, and declare these inline
functions above the macros.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Options to "git pack-objects" that take numeric values like
--window and --depth should not accept negative values; the input
validation has been tightened.
* jk/pack-objects-negative-options-fix:
pack-objects: clamp negative depth to 0
t5316: check behavior of pack-objects --depth=0
pack-objects: clamp negative window size to 0
t5300: check that we produced expected number of deltas
t5300: modernize basic tests
|
|
"git repack -A -d" in a partial clone unnecessarily loosened
objects in promisor pack.
* rs/repack-without-loosening-promised-objects:
repack: avoid loosening promisor objects in partial clones
|
|
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
|
|
"git rev-list" learns the "--filter=object:type=<type>" option,
which can be used to exclude objects of the given kind from the
packfile generated by pack-objects.
* ps/rev-list-object-type-filter:
rev-list: allow filtering of provided items
pack-bitmap: implement combined filter
pack-bitmap: implement object type filter
list-objects: implement object type filter
list-objects: support filtering by tag and commit
list-objects: move tag processing into its own function
revision: mark commit parents as NOT_USER_GIVEN
uploadpack.txt: document implication of `uploadpackfilter.allow`
|
|
A negative delta depth makes no sense, and the code is not prepared to
handle it. If passed "--depth=-1" on the command line, then this line
from break_delta_chains():
cur->depth = (total_depth--) % (depth + 1);
triggers a divide-by-zero. This is undefined behavior according to the C
standard, but on POSIX systems results in SIGFPE killing the process.
This is certainly one way to inform the use that the command was
invalid, but it's a bit friendlier to just treat it as "don't allow any
deltas", which we already do for --depth=0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A negative window size makes no sense, and the code in find_deltas() is
not prepared to handle it. If you pass "-1", for example, we end up
generate a 0-length array of "struct unpacked", but our loop assumes it
has at least one entry in it (and we end up reading garbage memory).
We could complain to the user about this, but it's more forgiving to
just clamp it to 0, which means "do not find any deltas at all". The
0-case is already tested earlier in the script, so we'll make sure this
does the same thing.
Reported-by: Yiyuan guo <yguoaz@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Handling of "promisor packs" that allows certain objects to be
missing and lazily retrievable has been optimized (a bit).
* jk/promisor-optim:
revision: avoid parsing with --exclude-promisor-objects
lookup_unknown_object(): take a repository argument
is_promisor_object(): free tree buffer after parsing
|
|
When `git repack -A -d` is run in a partial clone, `pack-objects`
is invoked twice: once to repack all promisor objects, and once to
repack all non-promisor objects. The latter `pack-objects` invocation
is with --exclude-promisor-objects and --unpack-unreachable, which
loosens all objects unused during this invocation. Unfortunately,
this includes promisor objects.
Because the -d argument to `git repack` subsequently deletes all loose
objects also in packs, these just-loosened promisor objects will be
immediately deleted. However, this extra disk churn is unnecessary in
the first place. For example, in a newly-cloned partial repo that
filters all blob objects (e.g. `--filter=blob:none`), `repack` ends up
unpacking all trees and commits into the filesystem because every
object, in this particular case, is a promisor object. Depending on
the repo size, this increases the disk usage considerably: In my copy
of the linux.git, the object directory peaked 26GB of more disk usage.
In order to avoid this extra disk churn, pass the names of the promisor
packfiles as --keep-pack arguments to the second invocation of
`pack-objects`. This informs `pack-objects` that the promisor objects
are already in a safe packfile and, therefore, do not need to be
loosened.
For testing, we need to validate whether any object was loosened.
However, the "evidence" (loosened objects) is deleted during the
process which prevents us from inspecting the object directory.
Instead, let's teach `pack-objects` to count loosened objects and
emit via trace2 thus allowing inspecting the debug events after the
process is finished. This new event is used on the added regression
test.
Lastly, add a new perf test to evaluate the performance impact
made by this changes (tested on git.git):
Test HEAD^ HEAD
----------------------------------------------------------
5600.3: gc 134.38(41.93+90.95) 7.80(6.72+1.35) -94.2%
For a bigger repository, such as linux.git, the improvement is
even bigger:
Test HEAD^ HEAD
-------------------------------------------------------------------
5600.3: gc 6833.00(918.07+3162.74) 268.79(227.02+39.18) -96.1%
These improvements are particular big because every object in the
newly-cloned partial repository is a promisor object.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use struct object_id for the names of objects. It isn't intended to
be used for other hash values that don't name objects such as the pack
hash.
Because struct object_id will soon need to have its algorithm member
set, using it in this code path would mean that we didn't set that
member, only the hash member, which would result in a crash. For both
of these reasons, switch to using an unsigned char array of size
GIT_MAX_RAWSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git pack-objects" makes a literal copy of a part of existing
packfile using the reachability bitmaps, its update to the progress
meter was broken.
* jk/pack-objects-bitmap-progress-fix:
pack-objects: update "nr_seen" progress based on pack-reused count
|
|
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When serving a clone or fetch with bitmaps, after deciding which objects
need to be sent our "pack reuse" mechanism kicks in: we try to send
more-or-less verbatim a bunch of objects from the beginning of the
bitmapped packfile without even adding them to the to_pack.objects
array.
After deciding which objects will be in the "reused" portion, we update
nr_result to account for those, and then trigger display_progress() to
show the user (who is undoubtedly dazzled that we managed to enumerate
so many objects so quickly).
But then something confusing happens: the "Enumerating objects" progress
meter jumps _backwards_, counting up from zero the number of objects we
actually add into to_pack.objects.
This worked correctly once upon a time, but was broken in 5af050437a
(pack-objects: show some progress when counting kept objects,
2018-04-15), when the latter half of that progress meter switched to
using a separate nr_seen counter, rather than nr_result. Nobody noticed
for two reasons:
- prior to the pack-reuse fixes from a14aebeac3 (Merge branch
'jk/packfile-reuse-cleanup', 2020-02-14), the reuse code almost
never kicked in anyway
- the output looks _kind of_ correct. The "backwards" moment is hard
to catch, because we overwrite the old progress number with the new
one, and the larger number is displayed only for a second. So unless
you look at that exact second, you just see the much smaller value,
counting up to the number of non-reused objects (though of course if
you catch it in stderr, or look at GIT_TRACE_PACKET from a server
with bitmaps, you can see both values).
This smaller output isn't wrong per se, but isn't counting what we ever
intended to. We should give the user the whole number of objects we
considered (which, as per 5af050437a's original purpose, is already
_not_ a count of what goes into to_pack.objects). The follow-on
"Counting objects" meter shows the actual number of objects we feed into
that array.
We can easily fix this by bumping (and showing) nr_seen for the
pack-reused objects. When the included test is run without this patch,
the second pack-objects invocation produces "Enumerating objects: 1" to
show the one loose object, even though the resulting pack has hundreds
of objects in it. With it, we jump to "Enumerating objects: 674" after
deciding on reuse, and then "675" when we add in the loose object.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing a new pack with a bitmap, it is sometimes convenient to
indicate some reference prefixes which should receive priority when
selecting which commits to receive bitmaps.
A truly motivated caller could accomplish this by setting
'pack.islandCore', (since all commits in the core island are similarly
marked as preferred) but this requires callers to opt into using delta
islands, which they may or may not want to do.
Introduce a new multi-valued configuration, 'pack.preferBitmapTips' to
allow callers to specify a list of reference prefixes. All references
which have a prefix contained in 'pack.preferBitmapTips' will mark their
tips as "preferred" in the same way as commits are marked as preferred
for selection by 'pack.islandCore'.
The choice of the verb "prefer" is intentional: marking the NEEDS_BITMAP
flag on an object does *not* guarantee that that object will receive a
bitmap. It merely guarantees that that commit will receive a bitmap over
any *other* commit in the same window by bitmap_writer_select_commits().
The test this patch adds reflects this quirk, too. It only tests that
a commit (which didn't receive bitmaps by default) is selected for
bitmaps after changing the value of 'pack.preferBitmapTips' to include
it. Other commits may lose their bitmaps as a byproduct of how the
selection process works (bitmap_writer_select_commits() ignores the
remainder of a window after seeing a commit with the NEEDS_BITMAP flag).
This configuration will aide in selecting important references for
multi-pack bitmaps, since they do not respect the same pack.islandCore
configuration. (They could, but doing so may be confusing, since it is
packs--not bitmaps--which are influenced by the delta-islands
configuration).
In a fork network repository (one which lists all forks of a given
repository as remotes), for example, it is useful to set
pack.preferBitmapTips to 'refs/remotes/<root>/heads' and
'refs/remotes/<root>/tags', where '<root>' is an opaque identifier
referring to the repository which is at the base of the fork chain.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comment update.
* hx/pack-objects-chunk-comment:
pack-objects: fix comment of reused_chunk.difference
|
|
"git repack" so far has been only capable of repacking everything
under the sun into a single pack (or split by size). A cleverer
strategy to reduce the cost of repacking a repository has been
introduced.
* tb/geometric-repack:
builtin/pack-objects.c: ignore missing links with --stdin-packs
builtin/repack.c: reword comment around pack-objects flags
builtin/repack.c: be more conservative with unsigned overflows
builtin/repack.c: assign pack split later
t7703: test --geometric repack with loose objects
builtin/repack.c: do not repack single packs with --geometric
builtin/repack.c: add '--geometric' option
packfile: add kept-pack cache for find_kept_pack_entry()
builtin/pack-objects.c: rewrite honor-pack-keep logic
p5303: measure time to repack with keep
p5303: add missing &&-chains
builtin/pack-objects.c: add '--stdin-packs' option
revision: learn '--no-kept-objects'
packfile: introduce 'find_kept_pack_entry()'
|
|
As record_reused_object(offset, offset - hashfile_total(out)) said,
reused_chunk.difference should be the offset of original packfile minus
the offset of the generated packfile. But the comment presented an opposite way.
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git pack-objects --stdin-packs' encounters a commit in a pack, it
marks it as a starting point of a best-effort reachability traversal
that is used to populate the name-hash of the objects listed in the
given packs.
The traversal expects that it should be able to walk the ancestors of
all commits in a pack without issue. Ordinarily this is the case, but it
is possible to having missing parents from an unreachable part of the
repository. In that case, we'd consider any missing objects in the
unreachable portion of the graph to be junk.
This should be handled gracefully: since the traversal is best-effort
(i.e., we don't strictly need to fill in all of the name-hash fields),
we should simply ignore any missing links.
This patch does that (by setting the 'ignore_missing_links' bit on the
rev_info struct), and ensures we don't regress in the future by adding a
test which demonstrates this case.
It is a little over-eager, since it will also ignore missing links in
reachable parts of the packs (which would indicate a corrupted
repository), but '--stdin-packs' is explicitly *not* about reachability.
So this step isn't making anything worse for a repository which contains
packs missing reachable objects (since we never drop objects with
'--stdin-packs').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have find_kept_pack_entry(), we don't have to manually keep
hunting through every pack to find a possible "kept" duplicate of the
object. This should be faster, assuming only a portion of your total
packs are actually kept.
Note that we have to re-order the logic a bit here; we can deal with the
disqualifying situations first (e.g., finding the object in a non-local
pack with --local), then "kept" situation(s), and then just fall back to
other "--local" conditions.
Here are the results from p5303 (measurements again taken on the
kernel):
Test HEAD^ HEAD
-----------------------------------------------------------------------------------------------
5303.5: repack (1) 57.26(54.59+10.84) 57.34(54.66+10.88) +0.1%
5303.6: repack with kept (1) 57.33(54.80+10.51) 57.38(54.83+10.49) +0.1%
5303.11: repack (50) 71.54(88.57+4.84) 71.70(88.99+4.74) +0.2%
5303.12: repack with kept (50) 85.12(102.05+4.94) 72.58(89.61+4.78) -14.7%
5303.17: repack (1000) 216.87(490.79+14.57) 217.19(491.72+14.25) +0.1%
5303.18: repack with kept (1000) 665.63(938.87+15.76) 246.12(520.07+14.93) -63.0%
and the --stdin-packs timings:
5303.7: repack with --stdin-packs (1) 0.01(0.01+0.00) 0.00(0.00+0.00) -100.0%
5303.13: repack with --stdin-packs (50) 3.53(12.07+0.24) 3.43(11.75+0.24) -2.8%
5303.19: repack with --stdin-packs (1000) 195.83(371.82+8.10) 130.50(307.15+7.66) -33.4%
So our repack with an empty .keep pack is roughly as fast as one without
a .keep pack up to 50 packs. But the --stdin-packs case scales a little
better, too.
Notably, it is faster than a repack of the same size and a kept pack. It
looks at fewer objects, of course, but the penalty for looking at many
packs isn't as costly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an upcoming commit, 'git repack' will want to create a pack comprised
of all of the objects in some packs (the included packs) excluding any
objects in some other packs (the excluded packs).
This caller could iterate those packs themselves and feed the objects it
finds to 'git pack-objects' directly over stdin, but this approach has a
few downsides:
- It requires every caller that wants to drive 'git pack-objects' in
this way to implement pack iteration themselves. This forces the
caller to think about details like what order objects are fed to
pack-objects, which callers would likely rather not do.
- If the set of objects in included packs is large, it requires
sending a lot of data over a pipe, which is inefficient.
- The caller is forced to keep track of the excluded objects, too, and
make sure that it doesn't send any objects that appear in both
included and excluded packs.
But the biggest downside is the lack of a reachability traversal.
Because the caller passes in a list of objects directly, those objects
don't get a namehash assigned to them, which can have a negative impact
on the delta selection process, causing 'git pack-objects' to fail to
find good deltas even when they exist.
The caller could formulate a reachability traversal themselves, but the
only way to drive 'git pack-objects' in this way is to do a full
traversal, and then remove objects in the excluded packs after the
traversal is complete. This can be detrimental to callers who care
about performance, especially in repositories with many objects.
Introduce 'git pack-objects --stdin-packs' which remedies these four
concerns.
'git pack-objects --stdin-packs' expects a list of pack names on stdin,
where 'pack-xyz.pack' denotes that pack as included, and
'^pack-xyz.pack' denotes it as excluded. The resulting pack includes all
objects that are present in at least one included pack, and aren't
present in any excluded pack.
To address the delta selection problem, 'git pack-objects --stdin-packs'
works as follows. First, it assembles a list of objects that it is going
to pack, as above. Then, a reachability traversal is started, whose tips
are any commits mentioned in included packs. Upon visiting an object, we
find its corresponding object_entry in the to_pack list, and set its
namehash parameter appropriately.
To avoid the traversal visiting more objects than it needs to, the
traversal is halted upon encountering an object which can be found in an
excluded pack (by marking the excluded packs as kept in-core, and
passing --no-kept-objects=in-core to the revision machinery).
This can cause the traversal to halt early, for example if an object in
an included pack is an ancestor of ones in excluded packs. But stopping
early is OK, since filling in the namehash fields of objects in the
to_pack list is only additive (i.e., having it helps the delta selection
process, but leaving it blank doesn't impact the correctness of the
resulting pack).
Even still, it is unlikely that this hurts us much in practice, since
the 'git repack --geometric' caller (which is introduced in a later
commit) marks small packs as included, and large ones as excluded.
During ordinary use, the small packs usually represent pushes after a
large repack, and so are unlikely to be ancestors of objects that
already exist in the repository.
(I found it convenient while developing this patch to have 'git
pack-objects' report the number of objects which were visited and got
their namehash fields filled in during traversal. This is also included
in the below patch via trace2 data lines).
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce an on-disk file to record revindex for packdata, which
traditionally was always created on the fly and only in-core.
* tb/pack-revindex-on-disk:
t5325: check both on-disk and in-memory reverse index
pack-revindex: ensure that on-disk reverse indexes are given precedence
t: support GIT_TEST_WRITE_REV_INDEX
t: prepare for GIT_TEST_WRITE_REV_INDEX
Documentation/config/pack.txt: advertise 'pack.writeReverseIndex'
builtin/pack-objects.c: respect 'pack.writeReverseIndex'
builtin/index-pack.c: write reverse indexes
builtin/index-pack.c: allow stripping arbitrary extensions
pack-write.c: prepare to write 'pack-*.rev' files
packfile: prepare for the existence of '*.rev' files
|
|
The "pack-objects" command needs to iterate over all the tags when
automatic tag following is enabled, but it actually iterated over
all refs and then discarded everything outside "refs/tags/"
hierarchy, which was quite wasteful.
* jv/pack-objects-narrower-ref-iteration:
builtin/pack-objects.c: avoid iterating all refs
|
|
The peel_ref() API has been replaced with peel_iterated_oid().
* jk/peel-iterated-oid:
refs: switch peel_ref() to peel_iterated_oid()
|
|
Add a new option that unconditionally enables the pack.writeReverseIndex
setting in order to run the whole test suite in a mode that generates
on-disk reverse indexes. Additionally, enable this mode in the second
run of tests under linux-gcc in 'ci/run-build-and-tests.sh'.
Once on-disk reverse indexes are proven out over several releases, we
can change the default value of that configuration to 'true', and drop
this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have an implementation that can write the new reverse index
format, enable writing a .rev file in 'git pack-objects' by consulting
the pack.writeReverseIndex configuration variable.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git-pack-objects, we iterate over all the tags if the --include-tag
option is passed on the command line. For some reason this uses
for_each_ref which is expensive if the repo has many refs. We should
use for_each_tag_ref instead.
Because the add_ref_tag callback will now only visit tags we
simplified it a bit.
The motivation for this change is that we observed performance issues
with a repository on gitlab.com that has 500,000 refs but only 2,000
tags. The fetch traffic on that repo is dominated by CI, and when we
changed CI to fetch with 'git fetch --no-tags' we saw a dramatic
change in the CPU profile of git-pack-objects. This lead us to this
particular ref walk. More details in:
https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/746#note_483546598
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace direct accesses to the revindex with calls to
'offset_to_pack_pos()' and 'pack_pos_to_index()'.
Since this caller already had some error checking (it can jump to the
'give_up' label if it encounters an error), we can easily check whether
or not the provided offset points to an object in the given pack. This
error checking existed prior to this patch, too, since the caller checks
whether the return value from 'find_pack_revindex()' was NULL or not.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace a direct access to the revindex array with
'pack_pos_to_offset()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace direct revindex accesses with calls to 'pack_pos_to_offset()'
and 'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
First replace 'find_pack_revindex()' with its replacement
'offset_to_pack_pos()'. This prevents any bogus OFS_DELTA that may make
its way through until 'write_reuse_object()' from causing a bad memory
read (if 'revidx' is 'NULL')
Next, replace a direct access of '->nr' with the wrapper function
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The on-disk bitmap format has a flag to mark a bitmap to be "reused".
This is a rather curious feature, and works like this:
- a run of pack-objects would decide to mark the last 80% of the
bitmaps it generates with the reuse flag
- the next time we generate bitmaps, we'd see those reuse flags from
the last run, and mark those commits as special:
- we'd be more likely to select those commits to get bitmaps in
the new output
- when generating the bitmap for a selected commit, we'd reuse the
old bitmap as-is (rearranging the bits to match the new pack, of
course)
However, neither of these behaviors particularly makes sense.
Just because a commit happened to be bitmapped last time does not make
it a good candidate for having a bitmap this time. In particular, we may
choose bitmaps based on how recent they are in history, or whether a ref
tip points to them, and those things will change. We're better off
re-considering fresh which commits are good candidates.
Reusing the existing bitmap _is_ a reasonable thing to do to save
computation. But only reusing exact bitmaps is a weak form of this. If
we have an old bitmap for A and now want a new bitmap for its child, we
should be able to compute that only by looking at trees and that are new
to the child. But this code would consider only exact reuse (which is
perhaps why it was eager to select those commits in the first place).
Furthermore, the recent switch to the reverse-edge algorithm for
generating bitmaps dropped this optimization entirely (and yet still
performs better).
So let's do a few cleanups:
- drop the whole "reusing bitmaps" phase of generating bitmaps. It's
not helping anything, and is mostly unused code (or worse, code that
is using CPU but not doing anything useful)
- drop the use of the on-disk reuse flag to select commits to bitmap
- stop setting the on-disk reuse flag in bitmaps we generate (since
nothing respects it anymore)
We will keep a few innards of the reuse code, which will help us
implement a more capable version of the "reuse" optimization:
- simplify rebuild_existing_bitmaps() into a function that only builds
the mapping of bits between the old and new orders, but doesn't
actually convert any bitmaps
- make rebuild_bitmap() public; we'll call it lazily to convert bitmaps
as we traverse (using the mapping created above)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few end-user facing messages have been updated to be
hash-algorithm agnostic.
* jc/object-names-are-not-sha-1:
messages: avoid SHA-1 in end-user facing messages
|
|
There are still a handful mentions of SHA-1 when we meant the
(hexadecimal) object names in end-user facing messages. Rewrite
them.
I was hoping that this can mostly be s/SHA-1/object name/, but
a few messages needed rephrasing to keep the result readable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new helper function has_object() has been introduced to make it
easier to mark object existence checks that do and don't want to
trigger lazy fetches, and a few such checks are converted using it.
* jt/has_object:
fsck: do not lazy fetch known non-promisor object
pack-objects: no fetch when allow-{any,promisor}
apply: do not lazy fetch when applying binary
sha1-file: introduce no-lazy-fetch has_object()
|
|
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
|
|
The options --missing=allow-{any,promisor} were introduced in caf3827e2f
("rev-list: add list-objects filtering support", 2017-11-22) with the
following note in the commit message:
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
The idea that these options are missing-object aware (and thus do not
need to lazily fetch objects, unlike unaware commands that assume that
all objects are present) are assumed in later commits such as 07ef3c6604
("fetch test: use more robust test for filtered objects", 2020-01-15).
However, the current implementations of these options use
has_object_file(), which indeed lazily fetches missing objects. Teach
these implementations not to do so. Also, update the documentation of
these options to be clearer.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an object to be packed is noticed to be missing, prefetch all
to-be-packed objects in one batch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use oid_object_info_extended() instead of oid_object_info() because a
subsequent commit needs to specify an additional flag here.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach upload-pack to send part of its packfile response as URIs.
An administrator may configure a repository with one or more
"uploadpack.blobpackfileuri" lines, each line containing an OID, a pack
hash, and a URI. A client may configure fetch.uriprotocols to be a
comma-separated list of protocols that it is willing to use to fetch
additional packfiles - this list will be sent to the server. Whenever an
object with one of those OIDs would appear in the packfile transmitted
by upload-pack, the server may exclude that object, and instead send the
URI. The client will then download the packs referred to by those URIs
before performing the connectivity check.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* tb/shallow-cleanup:
shallow: use struct 'shallow_lock' for additional safety
shallow.h: document '{commit,rollback}_shallow_file'
shallow: extract a header file for shallow-related functions
commit: make 'commit_graft_pos' non-static
|
|
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* jk/oid-array-cleanups:
oidset: stop referring to sha1-array
ref-filter: stop referring to "sha1 array"
bisect: stop referring to sha1_array
test-tool: rename sha1-array to oid-array
oid_array: rename source file from sha1-array
oid_array: use size_t for iteration
oid_array: use size_t for count and allocation
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Jeff King
Rafael Silva
brian m. carlson
Patrick Steinhardt
Taylor Blau
Han Xin
René Scharfe
Jacob Vosmaer
Jonathan Tan
Denton Liu