| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
|
|
This function sets all the relevant flags to disabled state, so that
no code that checks only one of them get it wrong.
Then we call this new function everywhere where diff merges output
suppression is needed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
|
|
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425b (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a53 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
|
|
The run_auto_gc() method is used in several places to trigger a check
for repo maintenance after some Git commands, such as 'git commit' or
'git fetch'.
To allow for extra customization of this maintenance activity, replace
the 'git gc --auto [--quiet]' call with one to 'git maintenance run
--auto [--quiet]'. As we extend the maintenance builtin with other
steps, users will be able to select different maintenance activities.
Rename run_auto_gc() to run_auto_maintenance() to be clearer what is
happening on this call, and to expose all callers in the current diff.
Rewrite the method to use a struct child_process to simplify the calls
slightly.
Since 'git fetch' already allows disabling the 'git gc --auto'
subprocess, add an equivalent option with a different name to be more
descriptive of the new behavior: '--[no-]maintenance'. Update the
documentation to include these options at the same time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
|
|
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check for existence and delete CHERRY_PICK_HEAD through ref functions.
This will help cherry-pick work with alternate ref storage backends.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'merge' command is not the only one that does merges; other commands
like checkout -m or rebase do as well. Unfortunately, the only area of
the code that checked for the "merge.renormalize" config setting was in
builtin/merge.c, meaning it could only affect merges performed by the
"merge" command. Move the handling of this config setting to
merge_recursive_config() so that other commands can benefit from it as
well. Fixes a few tests in t6038.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code optimization for a common case.
* an/merge-single-strategy-optim:
merge: optimization to skip evaluate_result for single strategy
|
|
For a merge with a single strategy, the result of evaluate_result() is
effectively not used and therefore is not needed, so avoid altogether.
On Windows, this optimization can halve the time required to perform a
recursive merge of a single commit with the LLVM repo.
Signed-off-by: Andrew Ng <andrew.ng@sony.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "am", "commit", "merge" and "rebase", when they are run with
the "--quiet" option, to pass "--quiet" down to "gc --auto".
* jc/auto-gc-quiet:
auto-gc: pass --quiet down from am, commit, merge and rebase
auto-gc: extract a reusable helper from "git fetch"
|
|
These commands take the --quiet option for their own operation, but
they forget to pass the option down when they invoke "git gc --auto"
internally.
Teach them to do so using the run_auto_gc() helper we added in the
previous step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* dl/opt-callback-cleanup:
Use OPT_CALLBACK and OPT_CALLBACK_F
|
|
"git blame" learns to take advantage of the "changed-paths" Bloom
filter stored in the commit-graph file.
* ds/blame-on-bloom:
test-bloom: check that we have expected arguments
test-bloom: fix some whitespace issues
blame: drop unused parameter from maybe_changed_path
blame: use changed-path Bloom filters
tests: write commit-graph with Bloom filters
revision: complicated pathspecs disable filters
|
|
"git merge" learns the "--autostash" option.
* dl/merge-autostash: (22 commits)
pull: pass --autostash to merge
t5520: make test_pull_autostash() accept expect_parent_num
merge: teach --autostash option
sequencer: implement apply_autostash_oid()
sequencer: implement save_autostash()
sequencer: unlink autostash in apply_autostash()
sequencer: extract perform_autostash() from rebase
rebase: generify create_autostash()
rebase: extract create_autostash()
reset: extract reset_head() from rebase
rebase: generify reset_head()
rebase: use apply_autostash() from sequencer.c
sequencer: rename stash_sha1 to stash_oid
sequencer: make apply_autostash() accept a path
rebase: use read_oneliner()
sequencer: make read_oneliner() extern
sequencer: configurably warn on non-existent files
sequencer: make read_oneliner() accept flags
sequencer: make file exists check more efficient
sequencer: stop leaking buf
...
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GIT_TEST_COMMIT_GRAPH environment variable updates the commit-
graph file whenever "git commit" is run, ensuring that we always
have an updated commit-graph throughout the test suite. The
GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS environment variable was
introduced to write the changed-path Bloom filters whenever "git
commit-graph write" is run. However, the GIT_TEST_COMMIT_GRAPH
trick doesn't launch a separate process and instead writes it
directly.
To expand the number of tests that have commits in the commit-graph
file, add a helper method that computes the commit-graph and place
that helper inside "git commit" and "git merge".
In the helper method, check GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS
to ensure we are writing changed-path Bloom filters whenever
possible.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using `starts_with()`, the magic number 7, `strlen()` and a
fair number of additions to verify the three parts of the config key
"branch.<branch>.mergeoptions", use `skip_prefix()` to jump through them
more explicitly.
We need to introduce a new variable for this (we certainly can't modify
`k` just because we see "branch."!). With `skip_prefix()` we often use
quite bland names like `p` or `str`. Let's do the same. If and when this
function needs to do more prefix-skipping, we'll have a generic variable
ready for this.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In rebase, one can pass the `--autostash` option to cause the worktree
to be automatically stashed before continuing with the rebase. This
option is missing in merge, however.
Implement the `--autostash` option and corresponding `merge.autoStash`
option in merge which stashes before merging and then pops after.
This option is useful when a developer has some local changes on a topic
branch but they realize that their work depends on another branch.
Previously, they had to run something like
git fetch ...
git stash push
git merge FETCH_HEAD
git stash pop
but now, that is reduced to
git fetch ...
git merge --autostash FETCH_HEAD
When an autostash is generated, it is automatically reapplied to the
worktree only in three explicit situations:
1. An incomplete merge is commit using `git commit`.
2. A merge completes successfully.
3. A merge is aborted using `git merge --abort`.
In all other situations where the merge state is removed using
remove_merge_branch_state() such as aborting a merge via
`git reset --hard`, the autostash is saved into the stash reflog
instead keeping the worktree clean.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Suggested-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
"""
These are several similar status codes:
- TRUST_UNDEFINED <error_token>
- TRUST_NEVER <error_token>
- TRUST_MARGINAL [0 [<validation_model>]]
- TRUST_FULLY [0 [<validation_model>]]
- TRUST_ULTIMATE [0 [<validation_model>]]
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash" learned to write refreshed index back to disk.
* tg/stash-refresh-index:
stash: make sure to write refreshed cache
merge: use refresh_and_write_cache
factor out refresh_and_write_cache function
|
|
Use the 'refresh_and_write_cache()' convenience function introduced in
the last commit, instead of refreshing and writing the index manually
in merge.c
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Analogous to commit, introduce a '--no-verify' option which bypasses the
pre-merge-commit hook. The shorthand '-n' is taken by '--no-stat'
already.
[js: * reworded commit message to reflect current state of --no-stat flag
and new hook name
* fixed flag documentation to reflect new hook name
* cleaned up trailing whitespace
* squashed test changes from the original series' patch 4/4
* modified tests to follow pattern from this series' patch 1/4
* added a test case for --no-verify with non-executable hook
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-merge does not honor the pre-commit hook when doing automatic merge
commits, and for compatibility reasons this is going to stay.
Introduce a pre-merge-commit hook which is called for an automatic merge
commit just like pre-commit is called for a non-automatic merge commit
(or any other commit).
[js: * renamed hook from "pre-merge" to "pre-merge-commit"
* only discard the index if the hook is actually present
* expanded githooks documentation entry
* clarified that hook should write messages to stderr
* squashed test changes from the original series' patch 4/4
* modified tests to follow new pattern from this series' patch 1/4
* added a test case for non-executable merge hooks
* added a test case for failed merges
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
* reworded commit message
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
f8b863598c ("builtin/merge: honor commit-msg hook for merges", 2017-09-07)
introduced the no-verify flag to merge for bypassing the commit-msg
hook, though in a different way from the implementation in commit.c.
Change the implementation in merge.c to be the same as in commit.c so
that both do the same in the same way. This also changes the output of
"git merge --help" to be more clear that the hook return code is
respected by default.
[js: * reworded commit message
* squashed documentation changes from original series' patch 3/4
]
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A loop has been rewritten for conciseness and clarity.
* ea/merge-code-cleanup:
builtin/merge.c - cleanup of code in for-cycle that tests strategies
|
|
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
|
|
The cmd_merge() function has a loop that tries different
merge strategies in turn, and stops when a strategy gets a
clean merge, while keeping the "best" conflicted merge so
far.
Make the loop easier to follow by moving the code around,
ensuring that there is only one "break" in the loop where
an automerge succeeds. Also group the actions that are
performed after an automerge succeeds together to a single
location, outside and after the loop.
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
|
|
"git merge" learned "--quit" option that cleans up the in-progress
merge while leaving the working tree and the index still in a mess.
* nd/merge-quit:
merge: add --quit
merge: remove drop_save() in favor of remove_merge_branch_state()
|
|
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert option_commit to tristate, representing the states of
'default/untouched', 'enabled-by-cli', 'disabled-by-cli'. With this in
place, check whether option_commit was enabled by cli when squashing a
merge. If so, error out, as this is not supported.
Previously, when --squash was supplied, 'option_commit' was silently
dropped. This could have been surprising to a user who tried to override
the no-commit behavior of squash using --commit explicitly.
Add a note to the --squash option for git-merge to clarify the
incompatibility, and add a test case to t7600-merge.sh
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Rafael Ascensão <rafa.almas@gmail.com>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Vishal Verma <vishal@stellar.sh>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows to cancel the current merge without resetting worktree/index,
which is what --abort is for. Like other --quit(s), this is often used
when you forgot that you're in the middle of a merge and already
switched away, doing different things. By the time you've realized, you
can't even continue the merge anymore.
This also makes all in-progress commands, am, merge, rebase, revert and
cherry-pick, take all three --abort, --continue and --quit (bisect has a
different UI).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both remove_branch_state() and drop_save() delete almost the same set of
files about the current merge state. The only difference is MERGE_RR but
it should also be cleaned up after a successful merge, which is what
drop_save() is for.
Make a new function that deletes all merge-related state files and use
it instead of drop_save(). This function will also be used in the next
patch that introduces --quit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Next, if commit.cleanup = scissors is specified, don't produce a
scissors line in commit if one already exists in the MERGE_MSG file.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change allows git-merge messages to be cleaned up with the
commit.cleanup configuration or --cleanup option, just like how
git-commit does it.
We also give git-pull the option of --cleanup so that it can also take
advantage of this change.
Finally, add testing to ensure that messages are properly cleaned up.
Note that some newlines that were added to the commit message were
removed so that if a file were read via -F, it would be copied
faithfully.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
|
|
OPTION_CALLBACK is much simpler/safer to use, but parse_opt_cb does
not allow access to parse_opt_ctx_t, which sometimes is useful
(e.g. to obtain the prefix).
Extending parse_opt_cb to take parse_opt_cb could result in a lot of
changes. Instead let's just allow ll_callback to be used with
OPTION_CALLBACK. The user will have to be careful, not to change
anything in ctx, or return wrong result code. But that's the price for
ll_callback.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Give names to these magic negative numbers. Make parse_opt_ll_cb
return an enum to make clear it can actually control parse_options()
with different return values (parse_opt_cb can too, but nobody needs
it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Lowlevel callbacks have different function signatures. Add a new field
in 'struct option' with the right type for lowlevel callbacks.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More codepaths become aware of working with in-core repository
instance other than the default "the_repository".
* nd/the-index: (22 commits)
rebase-interactive.c: remove the_repository references
rerere.c: remove the_repository references
pack-*.c: remove the_repository references
pack-check.c: remove the_repository references
notes-cache.c: remove the_repository references
line-log.c: remove the_repository reference
diff-lib.c: remove the_repository references
delta-islands.c: remove the_repository references
cache-tree.c: remove the_repository references
bundle.c: remove the_repository references
branch.c: remove the_repository reference
bisect.c: remove the_repository reference
blame.c: remove implicit dependency the_repository
sequencer.c: remove implicit dependency on the_repository
sequencer.c: remove implicit dependency on the_index
transport.c: remove implicit dependency on the_index
notes-merge.c: remove implicit dependency the_repository
notes-merge.c: remove implicit dependency on the_index
list-objects.c: reduce the_repository references
list-objects-filter.c: remove implicit dependency on the_index
...
|
|
More _("i18n") markings.
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
|
|
"git merge" and "git pull" that merges into an unborn branch used
to completely ignore "--verify-signatures", which has been
corrected.
* jk/verify-sig-merge-into-void:
pull: handle --verify-signatures for unborn branch
merge: handle --verify-signatures for unborn branch
merge: extract verify_merge_signature() helper
|
|
Since we're going to pass 'struct repository *' around most of the
time instead of 'struct index_state *' because most sequencer.c
operations need more than just the index, the_repository is replaced
as well in the functions that now take 'struct repository
*'. the_repository is still present in this file, but total clean up
will be done later. It's not the main focus of this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Sergey Organov
Elijah Newren
Bradley M. Kuhn
Derrick Stolee
Jonathan Tan
Han-Wen Nienhuys
Andrew Ng
Denton Liu
Martin Ågren
Hans Jerry Illikainen
Thomas Gummerer
Michael J Gruber
Michael J Gruber
Edmundo Carmona Antoranz
Vishal Verma
Nguyễn Thái Ngọc Duy