| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change code in "builtin/grep.c" and "builtin/ls-tree.c" to trust the
"prefix" passed from "run_builtin()". The "prefix" we get from setup.c
is either going to be NULL or a string of length >0, never "".
So we can drop the "prefix && *prefix" checks added for
"builtin/grep.c" in 0d042fecf2f (git-grep: show pathnames relative to
the current directory, 2006-08-11), and for "builtin/ls-tree.c" in
a69dd585fca (ls-tree: chomp leading directories when run from a
subdirectory, 2005-12-23).
As seen in code in revision.c that was added in cd676a51367 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12) we already have existing code that does away with this
assertion.
This makes it easier to reason about a subsequent change to the
"prefix_length" code in grep.c in a subsequent commit, and since we're
going to the trouble of doing that let's leave behind an assert() to
promise this to any future callers.
For "builtin/grep.c" it would be painful to pass the "prefix" down the
callchain of:
cmd_grep -> grep_tree -> grep_submodule -> grep_cache -> grep_oid ->
grep_source_name
So for the code that needs it in grep_source_name() let's add a
"grep_prefix" variable similar to the existing "ls_tree_prefix".
While at it let's move the code in cmd_ls_tree() around so that we
assign to the "ls_tree_prefix" right after declaring the variables,
and stop assigning to "prefix". We only subsequently used that
variable later in the function after clobbering it. Let's just use our
own "grep_prefix" instead.
Let's also add an assert() in git.c, so that we'll make this promise
about the "prefix" to any current and future callers, as well as to
any readers of the code.
Code history:
* The strlen() in "grep.c" hasn't been used since 493b7a08d80 (grep:
accept relative paths outside current working directory, 2009-09-05).
When that code was added in 0d042fecf2f (git-grep: show pathnames
relative to the current directory, 2006-08-11) we used the length.
But since 493b7a08d80 we haven't used it for anything except a
boolean check that we could have done on the "prefix" member
itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d5 (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
|
|
These functions call tree_entry_interesting() which will soon require
a 'struct index_state *' to be passed in. Instead of just changing the
function signature to take an index, update to take a repo instead
because these functions do need object database access.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When printing variables which contain a size, today "unsigned long"
is used at many places.
In order to be able to change the type from "unsigned long" into size_t
some day in the future, we need to have a way to print 64 bit variables
on a system that has "unsigned long" defined to be 32 bit, like Win64.
Upcast all those variables into uintmax_t before they are printed.
This is to prepare for a bigger change, when "unsigned long"
will be converted into size_t for variables which may be > 4Gib.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of oid_object_info
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names. Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:
@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)
@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the callback functions for read_tree_recursive to take a pointer
to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert parse_tree_indirect to take a pointer to struct object_id.
Update all the callers. This transformation was achieved using the
following semantic patch and manual updates to the declaration and
definition. Update builtin/checkout.c manually as well, since it uses a
ternary expression not handled by the semantic patch.
@@
expression E1;
@@
- parse_tree_indirect(E1.hash)
+ parse_tree_indirect(&E1)
@@
expression E1;
@@
- parse_tree_indirect(E1->hash)
+ parse_tree_indirect(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a prerequisite to convert do_diff_cache, which is required to
convert parse_tree_indirect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'show_recursive()' to use the pathspec struct interface from
using the '_raw' entry in the pathspec struct.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We sometimes sprintf into fixed-size buffers when we know
that the buffer is large enough to fit the input (either
because it's a constant, or because it's numeric input that
is bounded in size). Likewise with strcpy of constant
strings.
However, these sites make it hard to audit sprintf and
strcpy calls for buffer overflows, as a reader has to
cross-reference the size of the array with the input. Let's
use xsnprintf instead, which communicates to a reader that
we don't expect this to overflow (and catches the mistake in
case we do).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ls-tree uses read_tree_recursive() which already does path filtering
using pathspec. No need to filter one more time based on prefix
only. "ls-tree ../somewhere" does not work because of
this. write_name_quotedpfx() can now be retired because nobody else
uses it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows the callback to use 'base' as a temporary buffer to
quickly assemble full path "without" extra allocation. The callback
has to restore it afterwards of course.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A long time ago, for some reason I was not happy with
match_pathspec(). I created a better version, match_pathspec_depth()
that was suppose to replace match_pathspec()
eventually. match_pathspec() has finally been gone since 6 months
ago. Use the shorter name for match_pathspec_depth().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch is essentially no-op. It helps catching new use of this
field though. This field is introduced as an intermediate step for the
pathspec conversion and will be removed eventually. At this stage no
more access sites should be introduced.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These call sites follow the pattern:
paths = get_pathspec(prefix, argv);
init_pathspec(&pathspec, paths);
which can be converted into a single parse_pathspec() call.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We mark pathspec with wildcards with the field use_wildcard. We
could do better by saving the length of the non-wildcard part, which
can be used for optimizations such as f9f6e2c (exclude: do strcmp as
much as possible before fnmatch - 2012-06-07).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the case of a corrupt repository, git ls-tree may report an error but
presently it exits with a code of 0.
This change uses the return code of read_tree_recursive instead.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the point of the last change is to allow use of strings as
literals no matter what characters are in them, "has_wildcard"
does not match what we use this field for anymore.
It is used to decide if the wildcard matching should be used, so
rename it to match the usage better.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch changes behavior of the two functions. Previously it does
prefix matching only. Now it can also do wildcard matching.
All callers are updated. Some gain wildcard matching (archive,
checkout), others reset pathspec_item.has_wildcard to retain old
behavior (ls-files, ls-tree as they are plumbing).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
find_unique_abbrev() already returns the full SHA-1 if abbrev = 0,
so we can remove the logic that avoids the call.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Junio C Hamano
Nguyễn Thái Ngọc Duy
Torsten Bögershausen
Stefan Beller
brian m. carlson
Brandon Williams
Jeff King
Stefan Beller
Jon Seymour
Štěpán Němec
Erik Faye-Lund
Linus Torvalds