| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
|
|
ls-files --ignored can be used together with either --others or
--cached. After being perplexed for a bit and digging in to the code, I
assumed that ls-files -i was just broken and not printing anything and
I had a nice patch ready to submit when I finally realized that -i can be
used with --cached to find tracked ignores.
While that was a mistake on my part, and a careful reading of the
documentation could have made this more clear, I suspect this is an
error others are likely to make as well. In fact, of two uses in our
testsuite, I believe one of the two did make this error. In t1306.13,
there are NO tracked files, and all the excludes built up and used in
that test and in previous tests thus have to be about untracked files.
However, since they were looking for an empty result, the mistake went
unnoticed as their erroneous command also just happened to give an empty
answer.
-i will most the time be used with -o, which would suggest we could just
make -i imply -o in the absence of either a -o or -c, but that would be
a backward incompatible break. Instead, let's just flag -i without
either a -o or -c as an error, and update the two relevant testcases to
specify their intent.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
|
|
Plug various leans reported by LSAN.
* ah/plugleaks:
builtin/rm: avoid leaking pathspec and seen
builtin/rebase: release git_format_patch_opt too
builtin/for-each-ref: free filter and UNLEAK sorting.
mailinfo: also free strbuf lists when clearing mailinfo
builtin/checkout: clear pending objects after diffing
builtin/check-ignore: clear_pathspec before returning
builtin/bugreport: don't leak prefixed filename
branch: FREE_AND_NULL instead of NULL'ing real_ref
bloom: clear each bloom_key after use
ls-files: free max_prefix when done
wt-status: fix multiple small leaks
revision: free remainder of old commit list in limit_list
|
|
common_prefix() returns a new string, which we store in max_prefix -
this string needs to be freed to avoid a leak. This leak is happening
in cmd_ls_files, hence is of no real consequence - an UNLEAK would be
just as good, but we might as well free the string properly.
Leak found while running t0002, see output below:
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9ab1b4 in do_xmalloc wrapper.c:41:8
#2 0x9ab248 in do_xmallocz wrapper.c:75:8
#3 0x9ab22a in xmallocz wrapper.c:83:9
#4 0x9ab2d7 in xmemdupz wrapper.c:99:16
#5 0x78d6a4 in common_prefix dir.c:191:15
#6 0x5aca48 in cmd_ls_files builtin/ls-files.c:669:16
#7 0x4cd92d in run_builtin git.c:453:11
#8 0x4cb5fa in handle_builtin git.c:704:3
#9 0x4ccf57 in run_argv git.c:771:4
#10 0x4caf49 in cmd_main git.c:902:19
#11 0x69ce2e in main common-main.c:52:11
#12 0x7f64d4d94349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full one to avoid missing files.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several methods specify that they take a 'struct index_state' pointer
with the 'const' qualifier because they intend to only query the data,
not change it. However, we will be introducing a step very low in the
method stack that might modify a sparse-index to become a full index in
the case that our queries venture inside a sparse-directory entry.
This change only removes the 'const' qualifiers that are necessary for
the following change which will actually modify the implementation of
index_name_stage_pos().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d5 (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor away the read_tree() function into its only user,
overlay_tree_on_index().
First, change read_one_entry_opt() to use the strbuf parameter
read_tree_recursive() passes down in place. This finishes up a partial
refactoring started in 6a0b0b6de99 (tree.c: update read_tree_recursive
callback to pass strbuf as base, 2014-11-30).
Moving the rest into overlay_tree_on_index() makes this index juggling
we're doing easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that read_tree() has been moved to ls-files.c we can get rid of
the stage != 1 case that'll never happen.
Let's not use read_tree_recursive() as a pass-through to pass "stage =
1" either. For now we'll pass an unused "stage = 0" for consistency
with other read_tree_recursive() callers, that argument will be
removed in a follow-up commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the read_tree() API was added around the same time as
read_tree_recursive() in 94537c78a82 (Move "read_tree()" to
"tree.c"[...], 2005-04-22) and b12ec373b8e ([PATCH] Teach read-tree
about commit objects, 2005-04-20) things have gradually migrated over
to the read_tree_recursive() version.
Now builtin/ls-files.c is the last user of this code, let's move all
the relevant code there. This allows for subsequent simplification of
it, and an eventual move to read_tree_recursive().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During a merge conflict, the name of a file may appear multiple
times in "git ls-files" output, once for each stage. If you use
both `--delete` and `--modify` at the same time, the output may
mention a deleted file twice.
When none of the '-t', '-u', or '-s' options is in use, these
duplicate entries do not add much value to the output.
Introduce a new '--deduplicate' option to suppress them.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: extended doc and rewritten commit log]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will make it easier to show only one entry per filename in the
next step.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: corrected the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This situation may occur in the original code: lstat() failed
but we use `&st` to feed ie_modified() later.
Therefore, we can directly execute show_ce without the judgment of
ie_modified() when lstat() has failed.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: fixed misindented code]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The dir structure seemed to have a number of leaks and problems around
it. First I noticed that parent_hashmap and recursive_hashmap were
being leaked (though Peff noticed and submitted fixes before me). Then
I noticed in the previous commit that clear_directory() was only taking
responsibility for a subset of fields within dir_struct, despite the
fact that entries[] and ignored[] we allocated internally to dir.c.
That, of course, resulted in many callers either leaking or haphazardly
trying to free these arrays and their contents.
Digging further, I found that despite the pretty clear documentation
near the top of dir.h that folks were supposed to call clear_directory()
when the user no longer needed the dir_struct, there were four callers
that didn't bother doing that at all. However, two of them clearly
thought about leaks since they had an UNLEAK(dir) directive, which to me
suggests that the method to free the data was too unclear. I suspect
the non-obviousness of the API and its holes led folks to avoid it,
which then snowballed into further problems with the entries[],
ignored[], parent_hashmap, and recursive_hashmap problems.
Rename clear_directory() to dir_clear() to be more in line with other
data structures in git, and introduce a dir_init() to handle the
suggested memsetting of dir_struct to all zeroes. I hope that a name
like "dir_clear()" is more clear, and that the presence of dir_init()
will provide a hint to those looking at the code that they need to look
for either a dir_clear() or a dir_free() and lead them to find
dir_clear().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* dl/opt-callback-cleanup:
Use OPT_CALLBACK and OPT_CALLBACK_F
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, the expected calling convention for the dir.c API was:
fill_directory(&dir, ..., pathspec)
foreach entry in dir->entries:
if (dir_path_match(entry, pathspec))
process_or_display(entry)
This may have made sense once upon a time, because the fill_directory() call
could use cheap checks to avoid doing full pathspec matching, and an external
caller may have wanted to do other post-processing of the results anyway.
However:
* this structure makes it easy for users of the API to get it wrong
* this structure actually makes it harder to understand
fill_directory() and the functions it uses internally. It has
tripped me up several times while trying to fix bugs and
restructure things.
* relying on post-filtering was already found to produce wrong
results; pathspec matching had to be added internally for multiple
cases in order to get the right results (see commits 404ebceda01c
(dir: also check directories for matching pathspecs, 2019-09-17)
and 89a1f4aaf765 (dir: if our pathspec might match files under a
dir, recurse into it, 2019-09-17))
* it's bad for performance: fill_directory() already has to do lots
of checks and knows the subset of cases where it still needs to do
more checks. Forcing external callers to do full pathspec
matching means they must re-check _every_ path.
So, add the pathspec matching within the fill_directory() internals, and
remove it from external callers.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The internal code originally invented for ".gitignore" processing
got reshuffled and renamed to make it less tied to "excluding" and
stress more that it is about "matching", as it has been reused for
things like sparse checkout specification that want to check if a
path is "included".
* ds/include-exclude:
unpack-trees: rename 'is_excluded_from_list()'
treewide: rename 'exclude' methods to 'pattern'
treewide: rename 'EXCL_FLAG_' to 'PATTERN_FLAG_'
treewide: rename 'struct exclude_list' to 'struct pattern_list'
treewide: rename 'struct exclude' to 'struct path_pattern'
|
|
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames several methods defined in dir.h to make
more sense with the renamed 'struct exclude_list' to 'struct
pattern_list' and 'struct exclude' to 'struct path_pattern':
* last_exclude_matching() -> last_matching_pattern()
* parse_exclude() -> parse_path_pattern()
In addition, the word 'exclude' was replaced with 'pattern'
in the methods below:
* add_exclude_list()
* add_excludes_from_file_to_list()
* add_excludes_from_file()
* add_excludes_from_blob_to_list()
* add_exclude()
* clear_exclude_list()
A few methods with the word "exclude" remain. These will
be handled seperately. In particular, the method
"is_excluded()" is concretely about the .gitignore file
relative to a specific directory. This is the important
boundary between library and consumer: is_excluded() cares
about .gitignore, but is_excluded() calls
last_matching_pattern() to make that decision.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames 'struct exclude_list' to 'struct pattern_list'
and renames several variables called 'el' to 'pl'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Calculating the sum of two array indexes to find the midpoint between
them can overflow, i.e. code like this is unsafe for big arrays:
mid = (first + last) >> 1;
Make sure the intermediate value stays within the boundaries instead,
like this:
mid = first + ((last - first) >> 1);
The loop condition of the binary search makes sure that 'last' is
always greater than 'first', so this is safe as long as 'first' is
not negative. And that can be verified easily using the pre-context
of each change, except for name-hash.c, so add an assertion to that
effect there.
The unsafe calculations were found with:
git grep '(.*+.*) *>> *1'
This is a continuation of 19716b21a4 (cleanup: fix possible overflow
errors in binary search, 2017-10-08).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Debugging code fix.
* tg/ls-files-debug-format-fix:
ls-files: use correct format string
|
|
struct stat_data and struct cache_time both use unsigned ints for all
their members. However the format string for 'git ls-files --debug'
currently uses %d for formatting these numbers. This means that we
potentially print these values incorrectly if they are greater than
INT_MAX.
This has been the case since the --debug option was introduced in 'git
ls-files' in 8497421715 ("ls-files: learn a debugging dump format",
2010-07-31).
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This hasn't been used since 17ddc66e70 (convert report_path_error to
take struct pathspec, 2013-07-14), as the names in the struct will have
already been prefixed when they were parsed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
|
|
"git fetch --recurse-submodules" may not fetch the necessary commit
that is bound to the superproject, which is getting corrected.
* sb/submodule-recursive-fetch-gets-the-tip:
fetch: ensure submodule objects fetched
submodule.c: fetch in submodules git directory instead of in worktree
submodule: migrate get_next_submodule to use repository structs
repository: repo_submodule_init to take a submodule struct
submodule: store OIDs in changed_submodule_names
submodule.c: tighten scope of changed_submodule_names struct
submodule.c: sort changed_submodule_names before searching it
submodule.c: fix indentation
sha1-array: provide oid_array_filter
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When constructing a struct repository for a submodule for some revision
of the superproject where the submodule is not contained in the index,
it may not be present in the working tree currently either. In that
situation giving a 'path' argument is not useful. Upgrade the
repo_submodule_init function to take a struct submodule instead.
The submodule struct can be obtained via submodule_from_{path, name} or
an artificial submodule struct can be passed in.
While we are at it, rename the repository struct in the repo_submodule_init
function, which is to be initialized, to a name that is not confused with
the struct submodule as easily. Perform such renames in similar functions
as well.
Also move its documentation into the header file.
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These functions call tree_entry_interesting() which will soon require
a 'struct index_state *' to be passed in. Instead of just changing the
function signature to take an index, update to take a repo instead
because these functions do need object database access.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running "git ls-files --no-exclude" will currently segfault, as its
option callback does not handle the "unset" parameter.
In theory this could be used to clear the exclude list, but it is not
clear how that would interact with the other exclude options, nor is the
current code capable of clearing the list. Let's just disable the broken
option.
Note that --no-exclude-from will similarly segfault, but
--no-exclude-standard will not. It just silently does the wrong thing
(pretending as if --exclude-standard was specified).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
write_eolinfo() does take an istate as function argument and it should
be used instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the convert API take an index_state instead of assuming the_index
in convert.c. All external call sites are converted blindly to keep
the patch simple and retain current behavior. Individual call sites
may receive further updates to use the right index instead of
the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification.
* nd/use-opt-int-set-f:
Use OPT_SET_INT_F() for cmdline option specification
|
|
The only thing these commands need is extra parseopt flag which can be
passed in by OPT_SET_INT_F() and it is a bit more compact than full
struct initialization.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae55
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the sha1 member of this struct to be an array of struct
object_id instead. This change is needed to convert find_unique_abbrev.
Convert some instances of hard-coded constants to use the_hash_algo as
well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
|
|
Add a new command line option (-f) to ls-files to have it use lowercase
letters for 'fsmonitor valid' files
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a common pattern in git commands to allocate some
memory that should last for the lifetime of the program and
then not bother to free it, relying on the OS to throw it
away.
This keeps the code simple, and it's fast (we don't waste
time traversing structures or calling free at the end of the
program). But it also triggers warnings from memory-leak
checkers like valgrind or LSAN. They know that the memory
was still allocated at program exit, but they don't know
_when_ the leaked memory stopped being useful. If it was
early in the program, then it's probably a real and
important leak. But if it was used right up until program
exit, it's not an interesting leak and we'd like to suppress
it so that we can see the real leaks.
This patch introduces an UNLEAK() macro that lets us do so.
To understand its design, let's first look at some of the
alternatives.
Unfortunately the suppression systems offered by
leak-checking tools don't quite do what we want. A
leak-checker basically knows two things:
1. Which blocks were allocated via malloc, and the
callstack during the allocation.
2. Which blocks were left un-freed at the end of the
program (and which are unreachable, but more on that
later).
Their suppressions work by mentioning the function or
callstack of a particular allocation, and marking it as OK
to leak. So imagine you have code like this:
int cmd_foo(...)
{
/* this allocates some memory */
char *p = some_function();
printf("%s", p);
return 0;
}
You can say "ignore allocations from some_function(),
they're not leaks". But that's not right. That function may
be called elsewhere, too, and we would potentially want to
know about those leaks.
So you can say "ignore the callstack when main calls
some_function". That works, but your annotations are
brittle. In this case it's only two functions, but you can
imagine that the actual allocation is much deeper. If any of
the intermediate code changes, you have to update the
suppression.
What we _really_ want to say is that "the value assigned to
p at the end of the function is not a real leak". But
leak-checkers can't understand that; they don't know about
"p" in the first place.
However, we can do something a little bit tricky if we make
some assumptions about how leak-checkers work. They
generally don't just report all un-freed blocks. That would
report even globals which are still accessible when the
leak-check is run. Instead they take some set of memory
(like BSS) as a root and mark it as "reachable". Then they
scan the reachable blocks for anything that looks like a
pointer to a malloc'd block, and consider that block
reachable. And then they scan those blocks, and so on,
transitively marking anything reachable from a global as
"not leaked" (or at least leaked in a different category).
So we can mark the value of "p" as reachable by putting it
into a variable with program lifetime. One way to do that is
to just mark "p" as static. But that actually affects the
run-time behavior if the function is called twice (you
aren't likely to call main() twice, but some of our cmd_*()
functions are called from other commands).
Instead, we can trick the leak-checker by putting the value
into _any_ reachable bytes. This patch keeps a global
linked-list of bytes copied from "unleaked" variables. That
list is reachable even at program exit, which confers
recursive reachability on whatever values we unleak.
In other words, you can do:
int cmd_foo(...)
{
char *p = some_function();
printf("%s", p);
UNLEAK(p);
return 0;
}
to annotate "p" and suppress the leak report.
But wait, couldn't we just say "free(p)"? In this toy
example, yes. But UNLEAK()'s byte-copying strategy has
several advantages over actually freeing the memory:
1. It's recursive across structures. In many cases our "p"
is not just a pointer, but a complex struct whose
fields may have been allocated by a sub-function. And
in some cases (e.g., dir_struct) we don't even have a
function which knows how to free all of the struct
members.
By marking the struct itself as reachable, that confers
reachability on any pointers it contains (including those
found in embedded structs, or reachable by walking
heap blocks recursively.
2. It works on cases where we're not sure if the value is
allocated or not. For example:
char *p = argc > 1 ? argv[1] : some_function();
It's safe to use UNLEAK(p) here, because it's not
freeing any memory. In the case that we're pointing to
argv here, the reachability checker will just ignore
our bytes.
3. Likewise, it works even if the variable has _already_
been freed. We're just copying the pointer bytes. If
the block has been freed, the leak-checker will skip
over those bytes as uninteresting.
4. Because it's not actually freeing memory, you can
UNLEAK() before we are finished accessing the variable.
This is helpful in cases like this:
char *p = some_function();
return another_function(p);
Writing this with free() requires:
int ret;
char *p = some_function();
ret = another_function(p);
free(p);
return ret;
But with unleak we can just write:
char *p = some_function();
UNLEAK(p);
return another_function(p);
This patch adds the UNLEAK() macro and enables it
automatically when Git is compiled with SANITIZE=leak. In
normal builds it's a noop, so we pay no runtime cost.
It also adds some UNLEAK() annotations to show off how the
feature works. On top of other recent leak fixes, these are
enough to get t0000 and t0001 to pass when compiled with
LSAN.
Note the case in commit.c which actually converts a
strbuf_release() into an UNLEAK. This code was already
non-leaky, but the free didn't do anything useful, since
we're exiting. Converting it to an annotation means that
non-leak-checking builds pay no runtime cost. The cost is
minimal enough that it's probably not worth going on a
crusade to convert these kinds of frees to UNLEAKS. I did it
here for consistency with the "sb" leak (though it would
have been equally correct to go the other way, and turn them
both into strbuf_release() calls).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
|
|
In order to use the submodule-config subsystem, callers first need to
initialize it by calling 'repo_read_gitmodules()' or
'gitmodules_config()' (which just redirects to
'repo_read_gitmodules()'). There are a couple of callers who need to
load an explicit revision of the repository's .gitmodules file (grep) or
need to modify the .gitmodules file so they would need to load it before
modify the file (checkout), but the majority of callers are simply
reading the .gitmodules file present in the working tree. For the
common case it would be nice to avoid the boilerplate of initializing
the submodule-config system before using it, so instead let's perform
lazy-loading of the submodule-config system.
Remove the calls to reading the gitmodules file from ls-files to show
that lazy-loading the .gitmodules file works.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Migrate the functions used to initialize the submodule-config to
submodule-config.c so that the callback routine used in the
initialization process can be static and prevent it from being used
outside of initializing the submodule-config through the main API.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Exit early when asked to prune an index that contains no entries to
begin with. This avoids pointer arithmetic on istate->cache, which is
possibly NULL in that case.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the code for moving members inside of an array and make it more
robust by using the helper macro MOVE_ARRAY. It calculates the size
based on the specified number of elements for us and supports NULL
pointers when that number is zero. Raw memmove(3) calls with NULL can
cause the compiler to (over-eagerly) optimize out later NULL checks.
This patch was generated with contrib/coccinelle/array.cocci and spatch
(Coccinelle).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert ls-files to use a repository struct and recurse submodules
inprocess.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Elijah Newren
Andrzej Hunt
brian m. carlson
Derrick Stolee
Ævar Arnfjörð Bjarmason
ZheNing Hu
Denton Liu
René Scharfe
Thomas Gummerer
Jeff King
Nguyễn Thái Ngọc Duy
Stefan Beller
Johannes Schindelin
Ben Peart
Brandon Williams