| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
|
|
Instead of dying of a segmentation fault if getcwd() returns NULL, use
xgetcwd() to make sure to write a useful error message and then exit
in an orderly fashion.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert several calls of getcwd() and die() to use xgetcwd() instead.
This way we get rid of fixed-size buffers (which can be too small
depending on the used file system) and gain consistent error messages.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Feeding the result of a real_path() call to real_path() again doesn't
change that result -- the returned path won't get any more real. Avoid
such a double call in set_git_dir_init() and for the same reason stop
calling real_path() before feeding paths to set_git_work_tree(), as the
latter already takes care of that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When extract l10n messages, we use "--add-comments" option to keep
comments right above the l10n messages for references. But sometimes
irrelevant comments are also extracted. For example in the following
code block, the comment in line 2 will be extracted as comment for the
l10n message in line 3, but obviously it's wrong.
{ OPTION_CALLBACK, 0, "ignore-removal", &addremove_explicit,
NULL /* takes no arguments */,
N_("ignore paths removed in the working tree (same as
--no-all)"),
PARSE_OPT_NOARG, ignore_removal_cb },
Since almost all comments for l10n translators are marked with the same
prefix (tag): "TRANSLATORS:", it's safe to only extract comments with
this special tag. I.E. it's better to call xgettext as:
xgettext --add-comments=TRANSLATORS: ...
Also tweaks the multi-line comment in "init-db.c", to make it start with
the proper tag, not "* TRANSLATORS:" (which has a star before the tag).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up and protection against concurrent write access to the
ref namespace.
* mh/safe-create-leading-directories:
rename_tmp_log(): on SCLD_VANISHED, retry
rename_tmp_log(): limit the number of remote_empty_directories() attempts
rename_tmp_log(): handle a possible mkdir/rmdir race
rename_ref(): extract function rename_tmp_log()
remove_dir_recurse(): handle disappearing files and directories
remove_dir_recurse(): tighten condition for removing unreadable dir
lock_ref_sha1_basic(): if locking fails with ENOENT, retry
lock_ref_sha1_basic(): on SCLD_VANISHED, retry
safe_create_leading_directories(): add new error value SCLD_VANISHED
cmd_init_db(): when creating directories, handle errors conservatively
safe_create_leading_directories(): introduce enum for return values
safe_create_leading_directories(): always restore slash at end of loop
safe_create_leading_directories(): split on first of multiple slashes
safe_create_leading_directories(): rename local variable
safe_create_leading_directories(): add explicit "slash" pointer
safe_create_leading_directories(): reduce scope of local variable
safe_create_leading_directories(): fix format of "if" chaining
|
|
safe_create_leading_directories_const() returns a non-zero value on
error. The old code at this calling site recognized a couple of
particular error values, and treated all other return values as
success. Instead, be more conservative: recognize the errors we are
interested in, but treat any other nonzero values as failures. This
is more robust in case somebody adds another possible return value
without telling us.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of returning magic integer values (which a couple of callers
go to the trouble of distinguishing), return values from an enum. Add
a docstring.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Solaris systems we'd warn about an implicit cast of mode_t when we
printed things out with the %d format. We'd get this warning under GCC
4.6.0 with Solaris headers:
builtin/init-db.c: In function ‘separate_git_dir’:
builtin/init-db.c:354:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘mode_t’ [-Wformat]
We've been doing this ever since v1.7.4.1-296-gb57fb80. Just work
around this by adding an explicit cast.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function was not gentle at all to the callers and died without giving
them a chance to deal with possible errors. Rename it to read_gitfile(),
and update all the callers.
As no existing caller needs a true "gently" variant, we do not bother
adding one at this point.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
init/clone: remove short option -L and document --separate-git-dir
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark the init-db messages that were added in v1.7.5-rc1~16^2 (init,
clone: support --separate-git-dir for .git file) by Nguyễn Thái Ngọc
Duy for translation.
This requires splitting up the tests that the patch added so that
certain parts of them can be skipped unless the C_LOCALE_OUTPUT
prerequisite is satisfied.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/init-gitdir:
init, clone: support --separate-git-dir for .git file
git-init.txt: move description section up
Conflicts:
builtin/clone.c
|
|
* ab/i18n-st: (69 commits)
i18n: git-shortlog basic messages
i18n: git-revert split up "could not revert/apply" message
i18n: git-revert literal "me" messages
i18n: git-revert "Your local changes" message
i18n: git-revert basic messages
i18n: git-notes GIT_NOTES_REWRITE_MODE error message
i18n: git-notes basic commands
i18n: git-gc "Auto packing the repository" message
i18n: git-gc basic messages
i18n: git-describe basic messages
i18n: git-clean clean.requireForce messages
i18n: git-clean basic messages
i18n: git-bundle basic messages
i18n: git-archive basic messages
i18n: git-status "renamed: " message
i18n: git-status "Initial commit" message
i18n: git-status "Changes to be committed" message
i18n: git-status shortstatus messages
i18n: git-status "nothing to commit" messages
i18n: git-status basic messages
...
Conflicts:
builtin/branch.c
builtin/checkout.c
builtin/clone.c
builtin/commit.c
builtin/grep.c
builtin/merge.c
builtin/push.c
builtin/revert.c
t/t3507-cherry-pick-conflict.sh
t/t7607-merge-overwrite.sh
|
|
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These messages could benefit from splitting up. An earlier version of
this patch began like this:
const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n");
const char *init_shared = _("Initialized empty shared Git repository in %s\n");
const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n");
const char *init_noshared = _("Initialized empty Git repository in %s\n");
But in the first round of gettextization I'm aiming to keep code
changes to a minimum for ease of review. So just add a comment
explaining to translators how the sprintf format gets used so they
can cope for now if the language's grammar allows.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the user visible strings in init-db.c to use gettext
localizations. This only converts messages which needed to be changed
from "foo" to _("foo"), and didn't need any TRANSLATORS comments.
I haven't marked the messages in init_db_usage or init_db_options for
translation, since that would require additional changes in
parse-options.c. Those can be done later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_dir must always be non-NULL so "if (git_dir)" is unnecessary.
Before this code, if git_dir == NULL, it will default to
DEFAULT_GIT_DIR_ENVIRONMENT.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also corrects a wrong description for clone.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This logic is now only used by cmd_init_db(). setup_* functions do not
rely on it any more. Move all the logic to cmd_init_db() and turn
get_git_work_tree() into a simple function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_git_work_tree() takes input as core.worktree, core.bare,
GIT_WORK_TREE and decides correct worktree setting.
Unfortunately it does not do its job well. core.worktree and
GIT_WORK_TREE should only be taken into account, if GIT_DIR is set
(which is handled by setup_explicit_git_dir). For other setup cases,
only core.bare matters.
Add a temporary variable setup_explicit to adjust get_git_work_tree()
behavior as such. This variable will be gone once setup_* rework is
done.
Also remove is_bare_repository_cfg check in set_git_work_tree() to
ease the rework. We are going to check for core.bare and core.worktree
early before setting worktree. For example, if core.bare is true, no
need to set worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The buffer used to construct paths like ".git/objects/info" and
".git/objects/pack" is allocated on the heap and never freed.
So free it. While at it, factor out the relevant code into its own
function and rename the sha1_dir variable to object_directory (to
match the change in everyday usage after the renaming of
SHA1_FILE_DIRECTORY in v0.99~603^2~7, 2005).
Noticed by valgrind while setting up tests (in test-lib).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we know we are creating a bare repository, we use setenv
to set the GIT_DIR directory to the current directory
(either where we already were, or one we created and chdir'd
into with "git init --bare <dir>").
However, with "git --bare init <dir>" (note the --bare as a
git wrapper option), the setup code actually sets GIT_DIR
for us, but it uses the wrong, original cwd when a directory
is given. Because our setenv does not use the overwrite
flag, it is ignored.
We need to set the overwrite flag, but only when we are
given a directory on the command line. That still allows:
GIT_DIR=foo.git git init --bare
to work. The behavior is changed for:
GIT_DIR=foo.git git init --bare bar.git
which used to create the repository in foo.git, but now will
use bar.git. This is more sane, as command line options
should generally override the environment.
Noticed by Oliver Hoffmann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sd/init-template:
wrap-for-bin: do not export an empty GIT_TEMPLATE_DIR
t/t0001-init.sh: add test for 'init with init.templatedir set'
init: having keywords without value is not a global error.
Add a "TEMPLATE DIRECTORY" section to git-init[1].
Add `init.templatedir` configuration variable.
|
|
* lt/deepen-builtin-source:
Move 'builtin-*' into a 'builtin/' subdirectory
Conflicts:
Makefile
|
|
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
René Scharfe
Jiang Xin
Michael Haggerty
Christian Couder
Nguyễn Thái Ngọc Duy
Torsten Bögershausen
Ævar Arnfjörð Bjarmason
Carlos Martín Nieto
Michael J Gruber
Jonathan Nieder
Jeff King
Linus Torvalds