| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gethostname(2) may not NUL terminate the buffer if hostname does
not fit; unfortunately there is no easy way to see if our buffer
was too small, but at least this will make sure we will not end up
using garbage past the end of the buffer.
* dt/xgethostname-nul-termination:
xgethostname: handle long hostnames
use HOST_NAME_MAX to size buffers for gethostname(2)
|
|
If the full hostname doesn't fit in the buffer supplied to
gethostname, POSIX does not specify whether the buffer will be
null-terminated, so to be safe, we should do it ourselves. Introduce
new function, xgethostname, which ensures that there is always a \0
at the end of the buffer.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
POSIX limits the length of host names to HOST_NAME_MAX. Export the
fallback definition from daemon.c and use this constant to make all
buffers used with gethostname(2) big enough for any possible result
and a terminating NUL.
Inspired-by: David Turner <dturner@twosigma.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We probe the "17/" loose object directory for auto-gc, and
use a local buffer to format the path. We can just use
git_path() for this. It handles paths of any length
(reducing our error handling). And because we feed the
result straight to a system call, we can just use the static
variant.
Note that git_path also knows the string "objects/" is
special, and will replace it with git_object_directory()
when necessary.
Another alternative would be to use sha1_file_name() for the
pretend object "170000...", but that ends up being more
hassle for no gain, as we have to truncate the final path
component.
Signed-off-by: Jeff King <peff@peff.net>
|
|
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
|
|
This function will be used in a following commit to get the expiration
time of the shared index files from the config, and it is generic
enough to be put in "config.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A server can end up in a state where there are lots of unreferenced
loose objects (say, because many users are doing a bunch of rebasing
and pushing their rebased branches). Running "git gc --auto" in
this state would cause a gc.log file to be created, preventing
future auto gcs, causing pack files to pile up. Since many git
operations are O(n) in the number of pack files, this would lead to
poor performance.
Git should never get itself into a state where it refuses to do any
maintenance, just because at some point some piece of the maintenance
didn't make progress.
Teach Git to ignore gc.log files which are older than (by default)
one day old, which can be tweaked via the gc.logExpiry configuration
variable. That way, these pack files will get cleaned up, if
necessary, at least once per day. And operators who find a need for
more-frequent gcs can adjust gc.logExpiry to meet their needs.
There is also some cleanup: a successful manual gc, or a
warning-free auto gc with an old log file, will remove any old
gc.log files.
It might still happen that manual intervention is required
(e.g. because the repo is corrupt), but at the very least it won't
be because Git is too dumb to try again.
Signed-off-by: David Turner <dturner@twosigma.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git gc --auto does an incremental repack of loose objects, we do
not expect to be able to write a bitmap; it is very likely that
objects in the new pack will have references to objects outside of the
pack. So we shouldn't try to write a bitmap, because doing so will
likely issue a warning.
This warning was making its way into gc.log. When the gc.log was
present, future auto gc runs would refuse to run.
Patch by Jeff King.
Bug report, test, and commit message by David Turner.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
|
|
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
|
|
This commit message is long and has lots of background and
numbers. The summary is: the current default of 250 doesn't
save much space, and costs CPU. It's not a good tradeoff.
Read on for details.
The "--aggressive" flag to git-gc does three things:
1. use "-f" to throw out existing deltas and recompute from
scratch
2. use "--window=250" to look harder for deltas
3. use "--depth=250" to make longer delta chains
Items (1) and (2) are good matches for an "aggressive"
repack. They ask the repack to do more computation work in
the hopes of getting a better pack. You pay the costs during
the repack, and other operations see only the benefit.
Item (3) is not so clear. Allowing longer chains means fewer
restrictions on the deltas, which means potentially finding
better ones and saving some space. But it also means that
operations which access the deltas have to follow longer
chains, which affects their performance. So it's a tradeoff,
and it's not clear that the tradeoff is even a good one.
The existing "250" numbers for "--aggressive" come
originally from this thread:
http://public-inbox.org/git/alpine.LFD.0.9999.0712060803430.13796@woody.linux-foundation.org/
where Linus says:
So when I said "--depth=250 --window=250", I chose those
numbers more as an example of extremely aggressive
packing, and I'm not at all sure that the end result is
necessarily wonderfully usable. It's going to save disk
space (and network bandwidth - the delta's will be re-used
for the network protocol too!), but there are definitely
downsides too, and using long delta chains may
simply not be worth it in practice.
There are some numbers in that thread, but they're mostly
focused on the improved window size, and measure the
improvement from --depth=250 and --window=250 together.
E.g.:
http://public-inbox.org/git/9e4733910712062006l651571f3w7f76ce64c6650dff@mail.gmail.com/
talks about the improved run-time of "git-blame", which
comes from the reduced pack size. But most of that reduction
is coming from --window=250, whereas most of the extra costs
come from --depth=250. There's a link in that thread showing
that increasing the depth beyond 50 doesn't seem to help
much with the size:
https://vcscompare.blogspot.com/2008/06/git-repack-parameters.html
but again, no discussion of the timing impact.
In an earlier thread from Ted Ts'o which discussed setting
the non-aggressive default (from 10 to 50):
http://public-inbox.org/git/20070509134958.GA21489%40thunk.org/
we have more numbers, with the conclusion that going past 50
does not help size much, and hurts the speed of normal
operations.
So from that, we might guess that 50 is actually a sweet
spot, even for aggressive, if we interpret aggressive to
"spend time now to make a better pack". It is not clear that
"--depth=250" is actually a better pack. It may be slightly
_smaller_, but it carries a run-time penalty.
Here are some more recent timings I did to verify that. They
show three things:
- the size of the resulting pack (so disk saved to store,
bandwidth saved on clones/fetches)
- the cost of "rev-list --objects --all", which shows the
effect of the delta chains on trees (commits typically
don't delta, and the command doesn't touch the blobs at
all)
- the cost of "log -Sfoo", which will additionally access
each blob
All cases were repacked with "git repack -adf --depth=$d
--window=250" (so basically, what would happen if we tweaked
the "gc --aggressive" default depth).
The timings are all wall-clock best-of-3. The machine itself
has plenty of RAM compared to the repositories (which is
probably typical of most workstations these days), so we're
really measuring CPU usage, as the whole thing will be in
disk cache after the first run.
The core.deltaBaseCacheLimit is at its default of 96MiB.
It's possible that tweaking it would have some impact on the
tests, as some of them (especially "log -S" on a large repo)
are likely to overflow that. But bumping that carries a
run-time memory cost, so for these tests, I focused on what
we could do just with the on-disk pack tradeoffs.
Each test is done for four depths: 250 (the current value),
50 (the current default that tested well previously), 100
(to show something on the larger side, which previous tests
showed was not a good tradeoff), and 10 (the very old
default, which previous tests showed was worse than 50).
Here are the numbers for linux.git:
depth | size | % | rev-list | % | log -Sfoo | %
-------+-------+-------+----------+--------+-----------+-------
250 | 967MB | n/a | 48.159s | n/a | 378.088 | n/a
100 | 971MB | +0.4% | 41.471s | -13.9% | 342.060 | -9.5%
50 | 979MB | +1.2% | 37.778s | -21.6% | 311.040s | -17.7%
10 | 1.1GB | +6.6% | 32.518s | -32.5% | 279.890s | -25.9%
and for git.git:
depth | size | % | rev-list | % | log -Sfoo | %
-------+-------+-------+----------+--------+-----------+-------
250 | 48MB | n/a | 2.215s | n/a | 20.922s | n/a
100 | 49MB | +0.5% | 2.140s | -3.4% | 17.736s | -15.2%
50 | 49MB | +1.7% | 2.099s | -5.2% | 15.418s | -26.3%
10 | 53MB | +9.3% | 2.001s | -9.7% | 12.677s | -39.4%
You can see that that the CPU savings for regular operations improves as we
decrease the depth. The savings are less for "rev-list" on a smaller repository
than they are for blob-accessing operations, or even rev-list on a larger
repository. This may mean that a larger delta cache would help (though setting
core.deltaBaseCacheLimit by itself doesn't).
But we can also see that the space savings are not that great as the depth goes
higher. Saving 5-10% between 10 and 50 is probably worth the CPU tradeoff.
Saving 1% to go from 50 to 100, or another 0.5% to go from 100 to 250 is
probably not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"gc.autoPackLimit" when set to 1 should not trigger a repacking
when there is only one pack, but the code counted poorly and did
so.
* ew/gc-auto-pack-limit-fix:
gc: fix off-by-one error with gc.autoPackLimit
|
|
"gc.autoPackLimit" when set to 1 should not trigger a repacking
when there is only one pack, but the code counted poorly and did
so.
* ew/gc-auto-pack-limit-fix:
gc: fix off-by-one error with gc.autoPackLimit
|
|
This matches the documentation and allows gc.autoPackLimit=1
to maintain a single pack without attempting a repack on every
"git gc --auto" invocation.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Having a leftover .idx file without corresponding .pack file in
the repository hurts performance; "git gc" learned to prune them.
* dk/gc-idx-wo-pack:
gc: remove garbage .idx files from pack dir
t5304: test cleaning pack garbage
prepare_packed_git(): refactor garbage reporting in pack directory
|
|
Add a custom report_garbage handler to collect and remove
garbage .idx files from the pack directory.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various compilation fixes and squelching of warnings.
* js/misc-fixes:
Correct fscanf formatting string for I64u values
Silence GCC's "cast of pointer to integer of a different size" warning
Squelch warning about an integer overflow
|
|
Prepare for Git on-disk repository representation to undergo
backward incompatible changes by introducing a new repository
format version "1", with an extension mechanism.
* jk/repository-extension:
introduce "preciousObjects" repository extension
introduce "extensions" form of core.repositoryformatversion
|
|
This fix is probably purely cosmetic because PRIuMAX is likely identical
to SCNuMAX. Nevertheless, when using a function of the scanf() family,
the correct interpolation to use is the latter, not the former.
Signed-off-by: Waldek Maleska <w.maleska@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
|
|
When "git gc --auto" is backgrounded, its diagnosis message is
lost. Save it to a file in $GIT_DIR and show it next time the "gc
--auto" is run.
* nd/gc-auto-background-fix:
gc: save log from daemonized gc --auto and print it next time
|
|
We sometimes sprintf into fixed-size buffers when we know
that the buffer is large enough to fit the input (either
because it's a constant, or because it's numeric input that
is bounded in size). Likewise with strcpy of constant
strings.
However, these sites make it hard to audit sprintf and
strcpy calls for buffer overflows, as a reader has to
cross-reference the size of the array with the input. Let's
use xsnprintf instead, which communicates to a reader that
we don't expect this to overflow (and catches the mistake in
case we do).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While commit 9f673f9 (gc: config option for running --auto in
background - 2014-02-08) helps reduce some complaints about 'gc
--auto' hogging the terminal, it creates another set of problems.
The latest in this set is, as the result of daemonizing, stderr is
closed and all warnings are lost. This warning at the end of cmd_gc()
is particularly important because it tells the user how to avoid "gc
--auto" running repeatedly. Because stderr is closed, the user does
not know, naturally they complain about 'gc --auto' wasting CPU.
Daemonized gc now saves stderr to $GIT_DIR/gc.log. Following gc --auto
will not run and gc.log printed out until the user removes gc.log.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "lockfile" API has been rebuilt on top of a new "tempfile" API.
* mh/tempfile:
credential-cache--daemon: use tempfile module
credential-cache--daemon: delete socket from main()
gc: use tempfile module to handle gc.pid file
lock_repo_for_gc(): compute the path to "gc.pid" only once
diff: use tempfile module
setup_temporary_shallow(): use tempfile module
write_shared_index(): use tempfile module
register_tempfile(): new function to handle an existing temporary file
tempfile: add several functions for creating temporary files
prepare_tempfile_object(): new function, extracted from create_tempfile()
tempfile: a new module for handling temporary files
commit_lock_file(): use get_locked_file_path()
lockfile: add accessor get_lock_file_path()
lockfile: add accessors get_lock_file_fd() and get_lock_file_fp()
create_bundle(): duplicate file descriptor to avoid closing it twice
lockfile: move documentation to lockfile.h and lockfile.c
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove remaining cruft from "git checkout --to", which
transitioned to "git worktree add".
* es/worktree-add:
config: rename "gc.pruneWorktreesExpire" to "gc.worktreePruneExpire"
Documentation/git-worktree: wordsmith worktree-related manpages
Documentation/config: fix stale "git prune --worktree" reference
Documentation/git-worktree: fix incorrect reference to file "locked"
Documentation/git-worktree: consistently use term "linked working tree"
|
|
As of df0b6cf (worktree: new place for "git prune --worktrees",
2015-06-29), linked worktree pruning functionality moved from
"git prune --worktrees" to "git worktree prune". Rename the
associated configuration variable accordingly.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles
checking if the current branch was checked out elsewhere, when we
know we are not switching the branches ourselves.
* nd/multiple-work-trees:
worktree: new place for "git prune --worktrees"
checkout: don't check worktrees when not necessary
|
|
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
|
|
If this extension is used in a repository, then no
operations should run which may drop objects from the object
storage. This can be useful if you are sharing that storage
with other repositories whose refs you cannot see.
For instance, if you do:
$ git clone -s parent child
$ git -C parent config extensions.preciousObjects true
$ git -C parent config core.repositoryformatversion 1
you now have additional safety when running git in the
parent repository. Prunes and repacks will bail with an
error, and `git gc` will skip those operations (it will
continue to pack refs and do other non-object operations).
Older versions of git, when run in the repository, will
fail on every operation.
Note that we do not set the preciousObjects extension by
default when doing a "clone -s", as doing so breaks
backwards compatibility. It is a decision the user should
make explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
|
|
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use `git_config_get_*()` family instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git gc --auto" was recently changed to run in the background to
give control back early to the end-user sitting in front of the
terminal, but it forgot that housekeeping involving reflogs should
be done without other processes competing for accesses to the refs.
* nd/daemonize-gc:
gc --auto: do not lock refs in the background
|
|
9f673f9 (gc: config option for running --auto in background -
2014-02-08) puts "gc --auto" in background to reduce user's wait
time. Part of the garbage collecting is pack-refs and pruning
reflogs. These require locking some refs and may abort other processes
trying to lock the same ref. If gc --auto is fired in the middle of a
script, gc's holding locks in the background could fail the script,
which could never happen before 9f673f9.
Keep running pack-refs and "reflog --prune" in foreground to stop
parallel ref updates. The remaining background operations (repack,
prune and rerere) should not impact running git processes.
Reported-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow tweaking the maximum length of the delta-chain produced by
"gc --aggressive".
* nd/gc-aggressive:
environment.c: fix constness for odb_pack_keep()
gc --aggressive: make --depth configurable
|
|
When 1c192f3 (gc --aggressive: make it really aggressive - 2007-12-06)
made --depth=250 the default value, it didn't really explain the
reason behind, especially the pros and cons of --depth=250.
An old mail from Linus below explains it at length. Long story short,
--depth=250 is a disk saver and a performance killer. Not everybody
agrees on that aggressiveness. Let the user configure it.
From: Linus Torvalds <torvalds@linux-foundation.org>
Subject: Re: [PATCH] gc --aggressive: make it really aggressive
Date: Thu, 6 Dec 2007 08:19:24 -0800 (PST)
Message-ID: <alpine.LFD.0.9999.0712060803430.13796@woody.linux-foundation.org>
Gmane-URL: http://article.gmane.org/gmane.comp.gcc.devel/94637
On Thu, 6 Dec 2007, Harvey Harrison wrote:
>
> 7:41:25elapsed 86%CPU
Heh. And this is why you want to do it exactly *once*, and then just
export the end result for others ;)
> -r--r--r-- 1 hharrison hharrison 324094684 2007-12-06 07:26 pack-1d46...pack
But yeah, especially if you allow longer delta chains, the end result can
be much smaller (and what makes the one-time repack more expensive is the
window size, not the delta chain - you could make the delta chains longer
with no cost overhead at packing time)
HOWEVER.
The longer delta chains do make it potentially much more expensive to then
use old history. So there's a trade-off. And quite frankly, a delta depth
of 250 is likely going to cause overflows in the delta cache (which is
only 256 entries in size *and* it's a hash, so it's going to start having
hash conflicts long before hitting the 250 depth limit).
So when I said "--depth=250 --window=250", I chose those numbers more as
an example of extremely aggressive packing, and I'm not at all sure that
the end result is necessarily wonderfully usable. It's going to save disk
space (and network bandwidth - the delta's will be re-used for the network
protocol too!), but there are definitely downsides too, and using long
delta chains may simply not be worth it in practice.
(And some of it might just want to have git tuning, ie if people think
that long deltas are worth it, we could easily just expand on the delta
hash, at the cost of some more memory used!)
That said, the good news is that working with *new* history will not be
affected negatively, and if you want to be _really_ sneaky, there are ways
to say "create a pack that contains the history up to a version one year
ago, and be very aggressive about those old versions that we still want to
have around, but do a separate pack for newer stuff using less aggressive
parameters"
So this is something that can be tweaked, although we don't really have
any really nice interfaces for stuff like that (ie the git delta cache
size is hardcoded in the sources and cannot be set in the config file, and
the "pack old history more aggressively" involves some manual scripting
and knowing how "git pack-objects" works rather than any nice simple
command line switch).
So the thing to take away from this is:
- git is certainly flexible as hell
- .. but to get the full power you may need to tweak things
- .. happily you really only need to have one person to do the tweaking,
and the tweaked end results will be available to others that do not
need to know/care.
And whether the difference between 320MB and 500MB is worth any really
involved tweaking (considering the potential downsides), I really don't
know. Only testing will tell.
Linus
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When it is not necessary to edit a commit log message (e.g. "git
commit -m" is given a message without specifying "-e"), we used to
disable the spawning of the editor by overriding GIT_EDITOR, but
this means all the uses of the editor, other than to edit the
commit log message, are also affected.
* bp/commit-p-editor:
run-command: mark run_hook_with_custom_index as deprecated
merge hook tests: fix and update tests
merge: fix GIT_EDITOR override for commit hook
commit: fix patch hunk editing with "commit -p -m"
test patch hunk editing with "commit -p -m"
merge hook tests: use 'test_must_fail' instead of '!'
merge hook tests: fix missing '&&' in test
|
|
Don't change git environment: move the GIT_EDITOR=":" override to the
hook command subprocess, like it's already done for GIT_INDEX_FILE.
Signed-off-by: Benoit Pierre <benoit.pierre@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow running "gc --auto" in the background.
* nd/daemonize-gc:
gc: config option for running --auto in background
daemon: move daemonize() to libgit.a
|
|
Shrink lifetime of variables by moving their definitions to an
inner scope where appropriate.
* ep/varscope:
builtin/gc.c: reduce scope of variables
builtin/fetch.c: reduce scope of variable
builtin/commit.c: reduce scope of variables
builtin/clean.c: reduce scope of variable
builtin/blame.c: reduce scope of variables
builtin/apply.c: reduce scope of variables
bisect.c: reduce scope of variable
|
Junio C Hamano
Brandon Williams
Johannes Schindelin
David Turner
René Scharfe
Jeff King
Christian Couder
Eric Wong
Doug Kelly
Waldek Maleska
Nguyễn Thái Ngọc Duy
Michael Haggerty
Eric Sunshine
Alex Henrie
Tanay Abhra
Benoit Pierre