summaryrefslogtreecommitdiff
path: root/builtin/for-each-ref.c
AgeCommit message (Collapse)AuthorFilesLines
2015-03-05Merge branch 'rs/simple-cleanups'Libravatar Junio C Hamano1-4/+3
Code cleanups. * rs/simple-cleanups: sha1_name: use strlcpy() to copy strings pretty: use starts_with() to check for a prefix for-each-ref: use skip_prefix() to avoid duplicate string comparison connect: use strcmp() for string comparison
2015-02-22for-each-ref: use skip_prefix() to avoid duplicate string comparisonLibravatar René Scharfe1-4/+3
Use skip_prefix() to get the part after "color:" (if present) and only compare it with "reset" instead of comparing the whole string again. This gets rid of the duplicate "color:" part of the string constant. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-11Merge branch 'ah/usage-strings'Libravatar Junio C Hamano1-1/+1
* ah/usage-strings: standardize usage info string format
2015-01-14Merge branch 'rc/for-each-ref-tracking'Libravatar Junio C Hamano1-2/+9
* rc/for-each-ref-tracking: for-each-ref: always check stat_tracking_info()'s return value
2015-01-14standardize usage info string formatLibravatar Alex Henrie1-1/+1
This patch puts the usage info strings that were not already in docopt- like format into docopt-like format, which will be a litle easier for end users and a lot easier for translators. Changes include: - Placing angle brackets around fill-in-the-blank parameters - Putting dashes in multiword parameter names - Adding spaces to [-f|--foobar] to make [-f | --foobar] - Replacing <foobar>* with [<foobar>...] Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-12for-each-ref: always check stat_tracking_info()'s return valueLibravatar Raphael Kubo da Costa1-2/+9
The code handling %(upstream:track) and %(upstream:trackshort) assumed that it always had a valid branch that had been sanitized earlier in populate_value(), and thus did not check the return value of the call to stat_tracking_info(). While there is indeed some sanitization code that basically corresponds to stat_tracking_info() returning 0 (no base branch set), the function can also return -1 when the base branch did exist but has since then been deleted. In this case, num_ours and num_theirs had undefined values and a call to `git for-each-ref --format="%(upstream:track)"` could print spurious values such as [behind -111794512] [ahead 38881640, behind 5103867] even for repositories with one single commit. Verify stat_tracking_info()'s return value and do not print anything if it returns -1. This behavior also matches the documentation ("has no effect if the ref does not have tracking information associated with it"). Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Raphael Kubo da Costa <raphael.kubo.da.costa@intel.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-22Merge branch 'rt/for-each-ref-spell-tcl-as-Tcl'Libravatar Junio C Hamano1-1/+1
* rt/for-each-ref-spell-tcl-as-Tcl: for-each-ref: correct spelling of Tcl in option description
2014-11-30for-each-ref: correct spelling of Tcl in option descriptionLibravatar Ralf Thielow1-1/+1
Tcl is conventionally spelled "Tcl". The description of option "--tcl", however, spells it "tcl". Let's follow the convention. Reported-by: Hartmut Henkel <hartmut_henkel@gmx.de> Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-21Merge branch 'rs/ref-transaction'Libravatar Junio C Hamano1-2/+9
The API to update refs have been restructured to allow introducing a true transactional updates later. We would even allow storing refs in backends other than the traditional filesystem-based one. * rs/ref-transaction: (25 commits) ref_transaction_commit: bail out on failure to remove a ref lockfile: remove unable_to_lock_error refs.c: do not permit err == NULL remote rm/prune: print a message when writing packed-refs fails for-each-ref: skip and warn about broken ref names refs.c: allow listing and deleting badly named refs test: put tests for handling of bad ref names in one place packed-ref cache: forbid dot-components in refnames branch -d: simplify by using RESOLVE_REF_READING branch -d: avoid repeated symref resolution reflog test: test interaction with detached HEAD refs.c: change resolve_ref_unsafe reading argument to be a flags field refs.c: make write_ref_sha1 static fetch.c: change s_update_ref to use a ref transaction refs.c: ref_transaction_commit: distinguish name conflicts from other errors refs.c: pass a list of names to skip to is_refname_available refs.c: call lock_ref_sha1_basic directly from commit refs.c: refuse to lock badly named refs in lock_ref_sha1_basic rename_ref: don't ask read_ref_full where the ref came from refs.c: pass the ref log message to _create/delete/update instead of _commit ...
2014-10-20Merge branch 'jn/parse-config-slot'Libravatar Junio C Hamano1-2/+4
Code cleanup. * jn/parse-config-slot: color_parse: do not mention variable name in error message pass config slots as pointers instead of offsets
2014-10-15for-each-ref: skip and warn about broken ref namesLibravatar Ronnie Sahlberg1-0/+5
Print a warning message for any bad ref names we find in the repo and skip them so callers don't have to deal with parsing them. It might be useful in the future to have a flag where we would not skip these refs for those callers that want to and are prepared (for example by using a --format argument with %0 as a delimiter after the ref name). Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-15refs.c: change resolve_ref_unsafe reading argument to be a flags fieldLibravatar Ronnie Sahlberg1-2/+4
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref resolves successfully for writing but not for reading). Change this to be a flags field instead, and pass the new constant RESOLVE_REF_READING when we want this behaviour. While at it, swap two of the arguments in the function to put output arguments at the end. As a nice side effect, this ensures that we can catch callers that were unaware of the new API so they can be audited. Give the wrapper functions resolve_refdup and read_ref_full the same treatment for consistency. Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-14color_parse: do not mention variable name in error messageLibravatar Jeff King1-2/+4
Originally the color-parsing function was used only for config variables. It made sense to pass the variable name so that the die() message could be something like: $ git -c color.branch.plain=bogus branch fatal: bad color value 'bogus' for variable 'color.branch.plain' These days we call it in other contexts, and the resulting error messages are a little confusing: $ git log --pretty='%C(bogus)' fatal: bad color value 'bogus' for variable '--pretty format' $ git config --get-color foo.bar bogus fatal: bad color value 'bogus' for variable 'command line' This patch teaches color_parse to complain only about the value, and then return an error code. Config callers can then propagate that up to the config parser, which mentions the variable name. Other callers can provide a custom message. After this patch these three cases now look like: $ git -c color.branch.plain=bogus branch error: invalid color value: bogus fatal: unable to parse 'color.branch.plain' from command-line config $ git log --pretty='%C(bogus)' error: invalid color value: bogus fatal: unable to parse --pretty format $ git config --get-color foo.bar bogus error: invalid color value: bogus fatal: unable to parse default color value Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-26Merge branch 'rs/realloc-array'Libravatar Junio C Hamano1-6/+3
Code cleanup. * rs/realloc-array: use REALLOC_ARRAY for changing the allocation size of arrays add macro REALLOC_ARRAY
2014-09-18use REALLOC_ARRAY for changing the allocation size of arraysLibravatar René Scharfe1-6/+3
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-03calloc() and xcalloc() takes nmemb and then sizeLibravatar Arjun Sreedharan1-1/+1
There are a handful more instances of this in compat/regex/ but they are borrowed code taht we do not want to touch with a change that really affects correctness, which this change is not. Signed-off-by: Arjun Sreedharan <arjun024@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-17use commit_list_count() to count the members of commit_listsLibravatar René Scharfe1-14/+2
Call commit_list_count() instead of open-coding it repeatedly. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-09Use starts_with() for C strings instead of memcmp()Libravatar René Scharfe1-1/+1
Convert three cases of checking for a constant prefix using memcmp() to starts_with(). This way there is no need for magic string length constants and we avoid running over the end of the string should it be shorter than the prefix. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-20use wildmatch() directly without fnmatch() wrapperLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Make it clear that we don't use fnmatch() anymore. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-30Merge branch 'maint'Libravatar Junio C Hamano1-2/+1
* maint: for-each-ref: remove unused variable
2013-12-30for-each-ref: remove unused variableLibravatar Ramkumar Ramachandra1-2/+1
No code ever used this symbol since the command was introduced at 9f613ddd (Add git-for-each-ref: helper for language bindings, 2006-09-15). Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-17Merge branch 'cc/starts-n-ends-with'Libravatar Junio C Hamano1-10/+10
Remove a few duplicate implementations of prefix/suffix comparison functions, and rename them to starts_with and ends_with. * cc/starts-n-ends-with: replace {pre,suf}fixcmp() with {starts,ends}_with() strbuf: introduce starts_with() and ends_with() builtin/remote: remove postfixcmp() and use suffixcmp() instead environment: normalize use of prefixcmp() by removing " != 0"
2013-12-06Merge branch 'rr/for-each-ref-decoration'Libravatar Junio C Hamano1-13/+81
Add a few formatting directives to "git for-each-ref --format=...", to paint them in color, etc. * rr/for-each-ref-decoration: for-each-ref: avoid color leakage for-each-ref: introduce %(color:...) for color for-each-ref: introduce %(upstream:track[short]) for-each-ref: introduce %(HEAD) asterisk marker t6300 (for-each-ref): don't hardcode SHA-1 hexes t6300 (for-each-ref): clearly demarcate setup
2013-12-05replace {pre,suf}fixcmp() with {starts,ends}_with()Libravatar Christian Couder1-7/+7
Leaving only the function definitions and declarations so that any new topic in flight can still make use of the old functions, replace existing uses of the prefixcmp() and suffixcmp() with new API functions. The change can be recreated by mechanically applying this: $ git grep -l -e prefixcmp -e suffixcmp -- \*.c | grep -v strbuf\\.c | xargs perl -pi -e ' s|!prefixcmp\(|starts_with\(|g; s|prefixcmp\(|!starts_with\(|g; s|!suffixcmp\(|ends_with\(|g; s|suffixcmp\(|!ends_with\(|g; ' on the result of preparatory changes in this series. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-19for-each-ref: avoid color leakageLibravatar Ramkumar Ramachandra1-5/+23
To make sure that an invocation like the following doesn't leak color, $ git for-each-ref --format='%(subject)%(color:green)' auto-reset at the end of the format string when the last color token seen in the format string isn't a color-reset. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-19for-each-ref: introduce %(color:...) for colorLibravatar Ramkumar Ramachandra1-2/+9
Enhance 'git for-each-ref' with color formatting options. You can now use the following format in for-each-ref: %(color:green)%(refname:short)%(color:reset) where color names are described in color.branch.*. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-19for-each-ref: introduce %(upstream:track[short])Libravatar Ramkumar Ramachandra1-3/+37
Introduce %(upstream:track) to display "[ahead M, behind N]" and %(upstream:trackshort) to display "=", ">", "<", or "<>" appropriately (inspired by contrib/completion/git-prompt.sh). Now you can use the following format in for-each-ref: %(refname:short)%(upstream:trackshort) to display refs with terse tracking information. Note that :track and :trackshort only work with "upstream", and error out when used with anything else. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-18for-each-ref: introduce %(HEAD) asterisk markerLibravatar Ramkumar Ramachandra1-2/+11
'git branch' shows which branch you are currently on with an '*', but 'git for-each-ref' misses this feature. So, extend its format with %(HEAD) for the same effect. Now you can use the following format in for-each-ref: %(HEAD) %(refname:short) to display an asterisk next to the current ref. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-01Merge branch 'jk/for-each-ref-skip-parsing'Libravatar Junio C Hamano1-9/+20
* jk/for-each-ref-skip-parsing: for-each-ref: avoid loading objects to print %(objectname)
2013-10-30for-each-ref: avoid loading objects to print %(objectname)Libravatar Jeff King1-9/+20
If you ask for-each-ref to print each ref and its object, like: git for-each-ref --format='%(objectname) %(refname)' this should involve little more work than looking at the ref files (and packed-refs) themselves. However, for-each-ref will actually load each object from disk just to print its sha1. For most repositories, this isn't a big deal, but it can be noticeable if you have a large number of refs to print. Here are best-of-five timings for the command above on a repo with ~10K refs: [before] real 0m0.112s user 0m0.092s sys 0m0.016s [after] real 0m0.014s user 0m0.012s sys 0m0.000s This patch checks for %(objectname) and %(objectname:short) before we actually parse the object (and the rest of the code is smart enough to avoid parsing if we have filled all of our placeholders). Note that we can't simply move the objectname parsing code into the early loop. If the "deref" form %(*objectname) is used, then we do need to parse the object in order to peel the tag. So instead of moving the code, we factor it out into a separate function that can be called for both cases. While we're at it, we add some basic tests for the dereferenced placeholders, which were not tested at all before. This helps ensure we didn't regress that case. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-30for-each-ref, quote: convert *_quote_print -> *_quote_bufLibravatar Nguyễn Thái Ngọc Duy1-4/+9
The print_value() function in for-each-ref.c prints values to stdout immediately using {sq|perl|python|tcl}_quote_print(). Change these lower-level quote functions to instead leave their results in strbuf so that we can later add post-processing to the results of them. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-07Merge branch 'nd/i18n-parseopt-help'Libravatar Junio C Hamano1-9/+9
A lot of i18n mark-up for the help text from "git <cmd> -h". * nd/i18n-parseopt-help: (66 commits) Use imperative form in help usage to describe an action Reduce translations by using same terminologies i18n: write-tree: mark parseopt strings for translation i18n: verify-tag: mark parseopt strings for translation i18n: verify-pack: mark parseopt strings for translation i18n: update-server-info: mark parseopt strings for translation i18n: update-ref: mark parseopt strings for translation i18n: update-index: mark parseopt strings for translation i18n: tag: mark parseopt strings for translation i18n: symbolic-ref: mark parseopt strings for translation i18n: show-ref: mark parseopt strings for translation i18n: show-branch: mark parseopt strings for translation i18n: shortlog: mark parseopt strings for translation i18n: rm: mark parseopt strings for translation i18n: revert, cherry-pick: mark parseopt strings for translation i18n: rev-parse: mark parseopt strings for translation i18n: reset: mark parseopt strings for translation i18n: rerere: mark parseopt strings for translation i18n: status: mark parseopt strings for translation i18n: replace: mark parseopt strings for translation ...
2012-08-21for-each-ref: Fix sort with multiple keysLibravatar Kacper Kornet1-1/+3
The linked list describing sort options was not correctly set up in opt_parse_sort. In the result, contrary to the documentation, only the last of multiple --sort options to git-for-each-ref was taken into account. This commit fixes it. Signed-off-by: Kacper Kornet <draenog@pld-linux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-20i18n: for-each-ref: mark parseopt strings for translationLibravatar Nguyễn Thái Ngọc Duy1-9/+9
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-13Convert resolve_ref+xstrdup to new resolve_refdup functionLibravatar Nguyễn Thái Ngọc Duy1-5/+2
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-08for-each-ref: add split message parts to %(contents:*).Libravatar Michał Górny1-6/+26
The %(body) placeholder returns the whole body of a tag or commit, including the signature. However, callers may want to get just the body without signature, or just the signature. Rather than change the meaning of %(body), which might break some scripts, this patch introduces a new set of placeholders which break down the %(contents) placeholder into its constituent parts. [jk: initial patch by mg, rebased on top of my refactoring and with tests by me] Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-08for-each-ref: handle multiline subjects like --prettyLibravatar Jeff King1-5/+24
Generally the format of a git tag or commit message is: subject body body body body body body However, we occasionally see multiline subjects like: subject with multiple lines body body body body body body The rest of git treats these multiline subjects as something to be concatenated and shown as a single line (e.g., "git log --pretty=format:%s" will do so since f53bd74). For consistency, for-each-ref should do the same with its "%(subject)". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-08for-each-ref: refactor subject and body placeholder parsingLibravatar Jeff King1-25/+29
The find_subpos function was a little hard to use, as well as to read. It would sometimes write into the subject and body pointers, and sometimes not. The body pointer sometimes could be compared to subject, and sometimes not. When actually duplicating the subject, the caller was forced to figure out again how long the subject is (which is not too big a deal when the subject is a single line, but hard to extend). The refactoring makes the function more straightforward, both to read and to use. We will always put something into the subject and body pointers, and we return explicit lengths for them, too. This lays the groundwork both for more complex subject parsing (e.g., multiline), as well as splitting the body into subparts (like the text versus the signature). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-26for-each-ref: fix objectname:short bugLibravatar Jay Soffian1-1/+2
When objectname:short was introduced, it forgot to copy the result of find_unique_abbrev. Because the result of find_unique_abbrev is a pointer to static buffer, this resulted in the same value being substituted in for each ref. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-07Merge branch 'maint'Libravatar Junio C Hamano1-2/+2
* maint: Change C99 comments to old-style C comments
2010-06-07Change C99 comments to old-style C commentsLibravatar Tor Arntsen1-2/+2
Signed-off-by: Tor Arntsen <tor@spacetec.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-18for-each-ref: Field with abbreviated objectnameLibravatar Michael J Gruber1-0/+3
Introduce a :short modifier to objectname which outputs the abbreviated object name. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-10Merge branch 'lt/deepen-builtin-source'Libravatar Junio C Hamano1-0/+996
* lt/deepen-builtin-source: Move 'builtin-*' into a 'builtin/' subdirectory Conflicts: Makefile
2010-02-22Move 'builtin-*' into a 'builtin/' subdirectoryLibravatar Linus Torvalds1-0/+955
This shrinks the top-level directory a bit, and makes it much more pleasant to use auto-completion on the thing. Instead of [torvalds@nehalem git]$ em buil<tab> Display all 180 possibilities? (y or n) [torvalds@nehalem git]$ em builtin-sh builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o [torvalds@nehalem git]$ em builtin-shor<tab> builtin-shortlog.c builtin-shortlog.o [torvalds@nehalem git]$ em builtin-shortlog.c you get [torvalds@nehalem git]$ em buil<tab> [type] builtin/ builtin.h [torvalds@nehalem git]$ em builtin [auto-completes to] [torvalds@nehalem git]$ em builtin/sh<tab> [type] shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o [torvalds@nehalem git]$ em builtin/sho [auto-completes to] [torvalds@nehalem git]$ em builtin/shor<tab> [type] shortlog.c shortlog.o [torvalds@nehalem git]$ em builtin/shortlog.c which doesn't seem all that different, but not having that annoying break in "Display all 180 possibilities?" is quite a relief. NOTE! If you do this in a clean tree (no object files etc), or using an editor that has auto-completion rules that ignores '*.o' files, you won't see that annoying 'Display all 180 possibilities?' message - it will just show the choices instead. I think bash has some cut-off around 100 choices or something. So the reason I see this is that I'm using an odd editory, and thus don't have the rules to cut down on auto-completion. But you can simulate that by using 'ls' instead, or something similar. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>