summaryrefslogtreecommitdiff
path: root/builtin/fetch.c
AgeCommit message (Collapse)AuthorFilesLines
2011-04-04Merge branch 'jl/submodule-fetch-on-demand'Libravatar Junio C Hamano1-12/+36
* jl/submodule-fetch-on-demand: fetch/pull: Describe --recurse-submodule restrictions in the BUGS section submodule update: Don't fetch when the submodule commit is already present fetch/pull: Don't recurse into a submodule when commits are already present Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option config: teach the fetch.recurseSubmodules option the 'on-demand' value fetch/pull: Add the 'on-demand' value to the --recurse-submodules option fetch/pull: recurse into submodules when necessary Conflicts: builtin/fetch.c submodule.c
2011-04-01Merge branch 'ab/i18n-st'Libravatar Junio C Hamano1-41/+41
* ab/i18n-st: (69 commits) i18n: git-shortlog basic messages i18n: git-revert split up "could not revert/apply" message i18n: git-revert literal "me" messages i18n: git-revert "Your local changes" message i18n: git-revert basic messages i18n: git-notes GIT_NOTES_REWRITE_MODE error message i18n: git-notes basic commands i18n: git-gc "Auto packing the repository" message i18n: git-gc basic messages i18n: git-describe basic messages i18n: git-clean clean.requireForce messages i18n: git-clean basic messages i18n: git-bundle basic messages i18n: git-archive basic messages i18n: git-status "renamed: " message i18n: git-status "Initial commit" message i18n: git-status "Changes to be committed" message i18n: git-status shortstatus messages i18n: git-status "nothing to commit" messages i18n: git-status basic messages ... Conflicts: builtin/branch.c builtin/checkout.c builtin/clone.c builtin/commit.c builtin/grep.c builtin/merge.c builtin/push.c builtin/revert.c t/t3507-cherry-pick-conflict.sh t/t7607-merge-overwrite.sh
2011-03-19Merge branch 'jk/trace-sifter'Libravatar Junio C Hamano1-0/+2
* jk/trace-sifter: trace: give repo_setup trace its own key add packet tracing debug code trace: add trace_strbuf trace: factor out "do we want to trace" logic trace: refactor to support multiple env variables trace: add trace_vprintf
2011-03-09i18n: git-fetch split up "(non-fast-forward)" messageLibravatar Ævar Arnfjörð Bjarmason1-3/+3
Split up the "(non-fast-forward)" message from printf directives and make it translatable. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-fetch update_local_ref messagesLibravatar Ævar Arnfjörð Bjarmason1-5/+5
Translate a "[rejected]" message spotted by Jeff King, and other things in update_local_ref along with it. Reported-by: Jeff King <peff@peff.net> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-fetch formatting messagesLibravatar Ævar Arnfjörð Bjarmason1-10/+10
Translate some of the formatting messages that appear on git-fetch showing how branches/tags etc. were updated. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-fetch basic messagesLibravatar Ævar Arnfjörð Bjarmason1-23/+23
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09fetch/pull: Add the 'on-demand' value to the --recurse-submodules optionLibravatar Jens Lehmann1-3/+19
Until now the --recurse-submodules option could only be used to either fetch all populated submodules recursively or to disable recursion completely. As fetch and pull now by default just fetch those submodules for which new commits have been fetched in the superproject, a command line option to enforce that behavior is needed to be able to override configuration settings. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09fetch/pull: recurse into submodules when necessaryLibravatar Jens Lehmann1-9/+17
To be able to access all commits of populated submodules referenced by the superproject it is sufficient to only then let "git fetch" recurse into a submodule when the new commits fetched in the superproject record new commits for it. Having these commits present is extremely useful when using the "--submodule" option to "git diff" (which is what "git gui" and "gitk" do since 1.6.6), as all submodule commits needed for creating a descriptive output can be accessed. Also merging submodule commits (added in 1.7.3) depends on the submodule commits in question being present to work. Last but not least this enables disconnected operation when using submodules, as all commits necessary for a successful "git submodule update -N" will have been fetched automatically. So we choose this mode as the default for fetch and pull. Before a new or changed ref from upstream is updated in update_local_ref() "git rev-list <new-sha1> --not --branches --remotes" is used to determine all newly fetched commits. These are then walked and diffed against their parent(s) to see if a submodule has been changed. If that is the case, its path is stored to be fetched after the superproject fetch is completed. Using the "--recurse-submodules" or the "--no-recurse-submodules" option disables the examination of the fetched refs because the result will be ignored anyway. There is currently no infrastructure for storing deleted and new submodules in the .git directory of the superproject. That's why fetch and pull for now only fetch submodules that are already checked out and are not renamed. In t7403 the "--no-recurse-submodules" argument had to be added to "git pull" to avoid failure because of the moved upstream submodule repo. Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08add packet tracing debug codeLibravatar Jeff King1-0/+2
This shows a trace of all packets coming in or out of a given program. This can help with debugging object negotiation or other protocol issues. To keep the code changes simple, we operate at the lowest level, meaning we don't necessarily understand what's in the packets. The one exception is a packet starting with "PACK", which causes us to skip that packet and turn off tracing (since the gigantic pack data will not be interesting to read, at least not in the trace format). We show both written and read packets. In the local case, this may mean you will see packets twice (written by the sender and read by the receiver). However, for cases where the other end is remote, this allows you to see the full conversation. Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>, where <foo> takes the same arguments as GIT_TRACE. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-15Make <identifier> lowercase as per CodingGuidelinesLibravatar Michael J Gruber1-3/+3
*.c part for matches with '"[A-Z]+"'. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-16Merge branch 'jl/fetch-submodule-recursive'Libravatar Junio C Hamano1-14/+50
* jl/fetch-submodule-recursive: fetch_populated_submodules(): document dynamic allocation Submodules: Add the "fetchRecurseSubmodules" config option Add the 'fetch.recurseSubmodules' config setting fetch/pull: Add the --recurse-submodules option Conflicts: builtin/fetch.c
2010-11-24Merge branch 'rs/opt-help-text'Libravatar Junio C Hamano1-2/+1
* rs/opt-help-text: verify-tag: document --verbose branch: improve --verbose description archive: improve --verbose description Describe various forms of "be quiet" using OPT__QUIET add OPT__FORCE add description parameter to OPT__QUIET add description parameter to OPT__DRY_RUN add description parameter to OPT__VERBOSE
2010-11-15add OPT__FORCELibravatar René Scharfe1-2/+1
Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE et.al. to simplify defining -f/--force options. Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12Add the 'fetch.recurseSubmodules' config settingLibravatar Jens Lehmann1-5/+16
This new boolean option can be used to override the default for "git fetch" and "git pull", which is to not recurse into populated submodules and fetch all new commits there too. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-12fetch/pull: Add the --recurse-submodules optionLibravatar Jens Lehmann1-14/+39
Until now you had to call "git submodule update" (without -N|--no-fetch option) or something like "git submodule foreach git fetch" to fetch new commits in populated submodules from their remote. This could lead to "(commits not present)" messages in the output of "git diff --submodule" (which is used by "git gui" and "gitk") after fetching or pulling new commits in the superproject and is an obstacle for implementing recursive checkout of submodules. Also "git submodule update" cannot fetch changes when disconnected, so it was very easy to forget to fetch the submodule changes before disconnecting only to discover later that they are needed. This patch adds the "--recurse-submodules" option to recursively fetch each populated submodule from the url configured in the .git/config of the submodule at the end of each "git fetch" or during "git pull" in the superproject. The submodule paths are taken from the index. The hidden option "--submodule-prefix" is added to "git fetch" to be able to print out the full paths of nested submodules. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-03Change incorrect "remote branch" to "remote tracking branch" in C codeLibravatar Matthieu Moy1-1/+1
(Just like we did for documentation already) In the process, we change "non-remote branch" to "branch outside the refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch". The new formulation actually corresponds to how the code detects this case (i.e. prefixcmp(refname, "refs/remotes")). Also, we use 'remote-tracking branch' in generated merge messages (by merge an fmt-merge-msg). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-03Change "tracking branch" to "remote-tracking branch"Libravatar Matthieu Moy1-2/+2
One more step towards consistancy. We change the documentation and the C code in a single patch, since the only instances in the C code are in comment and usage strings. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-08Use parentheses and `...' where appropriateLibravatar Štěpán Němec1-1/+1
Remove some stray usage of other bracket types and asterisks for the same purpose. Signed-off-by: Štěpán Němec <stepnem@gmail.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-09builtin/fetch.c: comment that branch->remote_name is usable when has_mergeLibravatar Brandon Casey1-0/+3
Save future readers the trouble of tracing code to determine that the two uses of branch->remote_name are safe when has_merge is set, by adding a comment explaining that it is so. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-08Merge branch 'bc/maint-fetch-url-only'Libravatar Junio C Hamano1-1/+3
* bc/maint-fetch-url-only: builtin/fetch.c: ignore merge config when not fetching from branch's remote t/t5510: demonstrate failure to fetch when current branch has merge ref
2010-08-31Merge branch 'dj/fetch-tagopt'Libravatar Junio C Hamano1-4/+6
* dj/fetch-tagopt: fetch: allow command line --tags to override config
2010-08-25builtin/fetch.c: ignore merge config when not fetching from branch's remoteLibravatar Brandon Casey1-1/+3
When 'git fetch' is supplied a single argument, it tries to match it against a configured remote and then fetch the refs specified by the named remote's fetchspec. Additionally, or alternatively, if the current branch has a merge ref configured, and if the name of the remote supplied to fetch matches the one in the branch's configuration, then git also adds the merge ref to the list of refs to update. If the argument to fetch does not specify a named remote, or if the name supplied does not match the remote configured for the current branch, then the current branch's merge configuration should not be considered. git currently mishandles the case when the argument to fetch specifies a GIT URL(i.e. not a named remote) and the current branch has a configured merge ref. In this case, fetch should ignore the branch's merge ref and attempt to fetch from the remote repository's HEAD branch. But, since fetch only checks _whether_ the current branch has a merge ref configured, and does _not_ check whether the branch's configured remote matches the command line argument (until later), it will mistakenly enter the wrong branch of an 'if' statement and will not fall back to fetch the HEAD branch. The fetch ends up doing nothing and returns with a successful zero status. Fix this by comparing the remote repository's name to the branch's remote name, in addition to whether it has a configured merge ref, sooner, so that fetch can correctly decide whether the branch's configuration is interesting or not, and fall back to fetching from the remote's HEAD branch when appropriate. This fixes the test in t5510. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-18Merge branch 'tf/string-list-init'Libravatar Junio C Hamano1-4/+4
* tf/string-list-init: string_list: Add STRING_LIST_INIT macro and make use of it.
2010-08-18Merge branch 'ar/string-list-foreach'Libravatar Junio C Hamano1-29/+13
* ar/string-list-foreach: Convert the users of for_each_string_list to for_each_string_list_item macro Add a for_each_string_list_item macro
2010-08-14fetch: allow command line --tags to override configLibravatar Daniel Johnson1-4/+6
Originally, if remote.<name>.tagopt was set, the --tags and option would have no effect when given to git fetch. So if tagopt="--no-tags" git fetch --tags would not actually fetch tags. This patch changes this behavior to only follow what is written in the config if there is no option passed by the command line. Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-27Clarify help message when no remote is specified in fetch/pull.Libravatar Matthieu Moy1-1/+2
The message is especially confusing when "git fetch" is ran from "git pull", for users not aware of "git fetch". The new message makes it clear that "fetch" means "fetch new revisions", and gives hint on the solution. We don't add a advice.* configuration option since this message doesn't appear in normal use, and shouldn't disturb advanced users. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-05string_list: Add STRING_LIST_INIT macro and make use of it.Libravatar Thiago Farina1-4/+4
Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-05Convert the users of for_each_string_list to for_each_string_list_item macroLibravatar Alex Riesen1-29/+13
The rule for selecting the candidates for conversion is: if the callback function returns only 0 (the condition for for_each_string_list to exit early), than it can be safely converted to the macro. A notable exception are the callers in builtin/remote.c. If converted, the readability in the file will suffer greately. Besides, the code is not very performance critical (at the moment, at least): it does output formatting of the list of remotes. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-30Merge branch 'jp/string-list-api-cleanup'Libravatar Junio C Hamano1-9/+9
* jp/string-list-api-cleanup: string_list: Fix argument order for string_list_append string_list: Fix argument order for string_list_lookup string_list: Fix argument order for string_list_insert_at_index string_list: Fix argument order for string_list_insert string_list: Fix argument order for for_each_string_list string_list: Fix argument order for print_string_list
2010-06-27string_list: Fix argument order for string_list_appendLibravatar Julian Phillips1-4/+4
Update the definition and callers of string_list_append to use the string_list as the first argument. This helps make the string_list API easier to use by being more consistent. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-27string_list: Fix argument order for string_list_lookupLibravatar Julian Phillips1-2/+2
Update the definition and callers of string_list_lookup to use the string_list as the first argument. This helps make the string_list API easier to use by being more consistent. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-27string_list: Fix argument order for string_list_insertLibravatar Julian Phillips1-2/+2
Update the definition and callers of string_list_insert to use the string_list as the first argument. This helps make the string_list API easier to use by being more consistent. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-27string_list: Fix argument order for for_each_string_listLibravatar Julian Phillips1-1/+1
Update the definition and callers of for_each_string_list to use the string_list as the first argument. This helps make the string_list API easier to use by being more consistent. Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-31Rewrite dynamic structure initializations to runtime assignmentLibravatar Gary V. Vaughan1-2/+4
Unfortunately, there are still plenty of production systems with vendor compilers that choke unless all compound declarations can be determined statically at compile time, for example hpux10.20 (I can provide a comprehensive list of our supported platforms that exhibit this problem if necessary). This patch simply breaks apart any compound declarations with dynamic initialisation expressions, and moves the initialisation until after the last declaration in the same block, in all the places necessary to have the offending compilers accept the code. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-09Merge branch 'maint'Libravatar Junio C Hamano1-4/+4
* maint: Let check_preimage() use memset() to initialize "struct checkout" fetch/push: fix usage strings
2010-03-20Merge branch 'maint'Libravatar Junio C Hamano1-6/+5
* maint: Update draft release notes to 1.7.0.3 fetch: Fix minor memory leak fetch: Future-proof initialization of a refspec on stack fetch: Check for a "^{}" suffix with suffixcmp() daemon: parse_host_and_port SIGSEGV if port is specified Makefile: Fix CDPATH problem pull: replace unnecessary sed invocation
2010-03-15Merge branch 'tc/transport-verbosity'Libravatar Junio C Hamano1-4/+3
* tc/transport-verbosity: transport: update flags to be in running order fetch and pull: learn --progress push: learn --progress transport->progress: use flag authoritatively clone: support multiple levels of verbosity push: support multiple levels of verbosity fetch: refactor verbosity option handling into transport.[ch] Documentation/git-push: put --quiet before --verbose Documentation/git-pull: put verbosity options before merge/fetch ones Documentation/git-clone: mention progress in -v Conflicts: transport.h
2010-03-10Merge branch 'lt/deepen-builtin-source'Libravatar Junio C Hamano1-0/+942
* lt/deepen-builtin-source: Move 'builtin-*' into a 'builtin/' subdirectory Conflicts: Makefile
2010-02-22Move 'builtin-*' into a 'builtin/' subdirectoryLibravatar Linus Torvalds1-0/+920
This shrinks the top-level directory a bit, and makes it much more pleasant to use auto-completion on the thing. Instead of [torvalds@nehalem git]$ em buil<tab> Display all 180 possibilities? (y or n) [torvalds@nehalem git]$ em builtin-sh builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o [torvalds@nehalem git]$ em builtin-shor<tab> builtin-shortlog.c builtin-shortlog.o [torvalds@nehalem git]$ em builtin-shortlog.c you get [torvalds@nehalem git]$ em buil<tab> [type] builtin/ builtin.h [torvalds@nehalem git]$ em builtin [auto-completes to] [torvalds@nehalem git]$ em builtin/sh<tab> [type] shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o [torvalds@nehalem git]$ em builtin/sho [auto-completes to] [torvalds@nehalem git]$ em builtin/shor<tab> [type] shortlog.c shortlog.o [torvalds@nehalem git]$ em builtin/shortlog.c which doesn't seem all that different, but not having that annoying break in "Display all 180 possibilities?" is quite a relief. NOTE! If you do this in a clean tree (no object files etc), or using an editor that has auto-completion rules that ignores '*.o' files, you won't see that annoying 'Display all 180 possibilities?' message - it will just show the choices instead. I think bash has some cut-off around 100 choices or something. So the reason I see this is that I'm using an odd editory, and thus don't have the rules to cut down on auto-completion. But you can simulate that by using 'ls' instead, or something similar. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>