| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* rs/no-no-no-parseopt:
parse-options: remove PARSE_OPT_NEGHELP
parse-options: allow positivation of options starting, with no-
test-parse-options: convert to OPT_BOOL()
Conflicts:
builtin/grep.c
|
|
PARSE_OPT_NEGHELP is confusing because short options defined with that
flag do the opposite of what the helptext says. It is also not needed
anymore now that options starting with no- can be negated by removing
that prefix. Convert its only two users to OPT_NEGBIT() and OPT_BOOL()
and then remove support for PARSE_OPT_NEGHELP.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In builtin/fast-export.c we'd assign to variables of the
tag_of_filtered_mode enum type with constants defined for the
signed_tag_mode enum.
We'd get the intended value since both the value we were assigning
with and the one we actually wanted had the same positional within
their respective enums, but doing it this way makes no sense.
This issue was spotted by Sun Studio 12 Update 1:
"builtin/fast-export.c", line 54: warning: enum type mismatch: op "=" (E_ENUM_TYPE_MISMATCH_OP)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/fast-export-quote-path:
fast-export: quote paths in output
|
|
Many pathnames in a fast-import stream need to be quoted. In
particular:
1. Pathnames at the end of an "M" or "D" line need quoting
if they contain a LF or start with double-quote.
2. Pathnames on a "C" or "R" line need quoting as above,
but also if they contain spaces.
For (1), we weren't quoting at all. For (2), we put
double-quotes around the paths to handle spaces, but ignored
the possibility that they would need further quoting.
This patch checks whether each pathname needs c-style
quoting, and uses it. This is slightly overkill for (1),
which doesn't actually need to quote many characters that
vanilla c-style quoting does. However, it shouldn't hurt, as
any implementation needs to be ready to handle quoted
strings anyway.
In addition to adding a test, we have to tweak a test which
blindly assumed that case (2) would always use
double-quotes, whether it needed to or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If fast-export is being used to generate a fast-import stream that
will be used afterwards it is desirable to indicate the end of the
stream with the new 'done' command.
Add a flag that causes fast-export to end with 'done'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
|
|
*.c part for matches with '"[A-Z]+"'.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* en/d-f-conflict-fix:
fast-export: ensure that a renamed file is printed after all references
|
|
t9350 sets up a commit where a file is both copied and renamed. The output
of fast-export for this commit should look like this:
author ...
committer ...
from :19
C "file2" "file4"
R "file2" "file5"
The order of the two modification lines is derived from the result that
the diff machinery produces.
060df62 (fast-export: Fix output order of D/F changes) inserted a qsort
call that modifies the order of the diff result. Unfortunately, qsort need
not be stable. Therefore, it is possible that the 'R' line appears before
the 'C' line and the resulting fast-import stream is incorrect.
Fix it by forcing that the rename entry is printed after all other
modification lines with the same file name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* en/d-f-conflict-fix:
merge-recursive: Avoid excessive output for and reprocessing of renames
merge-recursive: Fix multiple file rename across D/F conflict
t6031: Add a testcase covering multiple renames across a D/F conflict
merge-recursive: Fix typo
Mark tests that use symlinks as needing SYMLINKS prerequisite
t/t6035-merge-dir-to-symlink.sh: Remove TODO on passing test
fast-import: Improve robustness when D->F changes provided in wrong order
fast-export: Fix output order of D/F changes
merge_recursive: Fix renames across paths below D/F conflicts
merge-recursive: Fix D/F conflicts
Add a rename + D/F conflict testcase
Add additional testcases for D/F conflicts
Conflicts:
merge-recursive.c
|
|
* en/fast-export-fix:
fast-export: Add a --full-tree option
fast-export: Fix dropping of files with --import-marks and path limiting
|
|
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option adds symmetry with fast-import, enabling it to also work with
complete trees instead of just incremental changes. It works by issuing a
'deleteall' directive with each commit and then listing the full set of
files that make up that commit, rather than just showing the list of files
that have changed since the (first) parent commit. Note that this
functionality is automatically turned on when using --import-marks together
with path limiting in order to avoid dropping important but unchanged
files.
This functionality is desired when using hand-written filters along with
'fast-export | some-filter | fast-import' as it can be easier to write
<some-filter> in terms of complete trees than incremental changes.
We could avoid the need to add this option by simply always turning it on.
While the end result would be identical, it would slow things down slightly
by printing many more filenames per commit which goes somewhat against the
'fast' in 'fast-export'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since fast-export operates by listing file changes since the (first) parent
commit, when using --import-marks and path limiting and using a wider list
of paths than in previous runs, files from the new path(s) will silently be
omitted from the result unless or until a commit which explicitly changes
those files. The resulting repository in such cases is broken and makes no
sense.
This commit fixes this by having fast-export work with complete trees
instead of incremental changes (when both --import-marks and path limiting
are used). It works by issuing a 'deleteall' directive with each commit and
then listing the full set of files that make up that commit, rather than
just showing the list of files that have changed since the (first) parent
commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fast-import stream format requires incremental changes which take place
immediately, meaning that for D->F conversions all files below the relevant
directory must be deleted before the resulting file of the same name is
created. Reversing the order can result in fast-import silently deleting
the file right after creating it, resulting in the file missing from the
resulting repository.
We correct this by first sorting the diff_queue_struct in depth-first
order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t9350: fix careless use of "cd"
difftool: Fix '--gui' when diff.guitool is unconfigured
fast-export: don't segfault when marks file cannot be opened
|
|
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
René Scharfe
Ævar Arnfjörð Bjarmason
Jeff King
Sverre Rabbelier
Michael J Gruber
Nguyễn Thái Ngọc Duy
Johannes Sixt
Thiago Farina
Elijah Newren
Julian Phillips
Linus Torvalds