| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some older versions of gcc complain about this line:
builtin/fast-export.c:412:2: error: dereferencing type-punned pointer
will break strict-aliasing rules [-Werror=strict-aliasing]
put_be32(oid.hash + hashsz - 4, counter++);
^
This seems to be a false positive, as there's no type-punning at all
here. oid.hash is an array of unsigned char; when we pass it to a
function it decays to a pointer to unsigned char. We do take a void
pointer in put_be32(), but it's immediately aliased with another pointer
to unsigned char (and clearly the compiler is looking inside the inlined
put_be32(), since the warning doesn't happen with -O0).
This happens on gcc 4.8 and 4.9, but not later versions (I tested gcc 6,
7, 8, and 9).
We can work around it by using a local array instead of an object_id
struct. This is a little more intimate with the details of object_id,
but for whatever reason doesn't seem to trigger the compiler warning.
We can revert this patch once we decide that those gcc versions are too
old to care about for a warning like this (gcc 4.8 is the default
compiler for Ubuntu Trusty, which is out-of-support but not fully
end-of-life'd until April 2022).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running "fast-export --anonymize" will leave "refs/heads/master"
untouched in the output, for two reasons:
- it helped to have some known reference point between the original
and anonymized repository
- since it's historically the default branch name, it doesn't leak any
information
Now that we can ask fast-export to retain particular tokens, we have a
much better tool for the first one (because it works for any ref, not
just master).
For the second, the notion of "default branch name" is likely to become
configurable soon, at which point the name _does_ leak information.
Let's drop this special case in preparation.
Note that we have to adjust the test a bit, since it relied on using the
name "master" in the anonymized repos. We could just use
--anonymize-map=master to keep the same output, but then we wouldn't
know if it works because of our hard-coded master or because of the
explicit map.
So let's flip the test a bit, and confirm that we anonymize "master",
but keep "other" in the output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After you anonymize a repository, it can be hard to find which commits
correspond between the original and the result, and thus hard to
reproduce commands that triggered bugs in the original.
Let's make it possible to seed the anonymization map. This lets users
either:
- mark names to be retained as-is, if they don't consider them secret
(in which case their original commands would just work)
- map names to new values, which lets them adapt the reproduction
recipe to the new names without revealing the originals
The implementation is fairly straight-forward. We already store each
anonymized token in a hashmap (so that the same token appearing twice is
converted to the same result). We can just introduce a new "seed"
hashmap which is consulted first.
This does make a few more promises to the user about how we'll anonymize
things (e.g., token-splitting pathnames). But it's unlikely that we'd
want to change those rules, even if the actual anonymization of a single
token changes. And it makes things much easier for the user, who can
unblind only a directory name without having to specify each path within
it.
One alternative to this approach would be to anonymize as we see fit,
and then dump the whole refname and pathname mappings to a file. This
does work, but it's a bit awkward to use (you have to manually dig the
items you care about out of the mapping).
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The anonymize_str() function takes a generator callback, but there's no
way to pass extra context to it. Let's add the usual "void *data"
parameter to the generator interface and pass it along.
This is mildly annoying for existing callers, all of which pass NULL,
but is necessary to avoid extra globals in some cases we'll add in a
subsequent patch.
While we're touching each of these callbacks, we can further observe
that none of them use the existing orig/len parameters at all. This
makes sense, since the point is for their output to have no discernable
basis in the original (my original version had some notion that we might
use a one-way function to obfuscate the names, but it was never
implemented). So let's drop those extra parameters. If a caller really
wants to do something with them, it can pass a struct through the new
data parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the other anonymization functions keep their static mappings
inside the function to avoid polluting the global namespace. Let's do
the same for "idents", as nobody needs it outside of
anonymize_ident_line().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we're using a separate keydata struct for hash lookups, we have
more flexibility in how we allocate anonymized_entry structs. Let's push
the "orig" key into a flex member within the struct. That should save us
a few bytes of memory per entry (a pointer plus any malloc overhead),
and may make lookups a little faster (since it's one less pointer to
chase in the comparison function).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the anonymize_str() interface is restricted to NUL-terminated
strings, there's no need for us to keep track of the length of each
entry in the hashmap. This simplifies the code and saves a bit of
memory.
Note that we do still need to compare the stored results to partial
strings passed in by the callers. We can do that by using hashmap's
keydata feature to get the ptr/len pair into the comparison function,
and then using strncmp().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the anonymize_mem() interface _can_ store arbitrary byte
sequences, none of the callers uses this feature (as of the previous
commit). We'd like to keep it that way, as we'll be exposing the
string-like nature of the anonymization routines to the user. So let's
tighten up the interface a bit:
- don't treat "len" as an out-parameter from anonymize_mem(); this
ensures callers treat the pointer result as a NUL-terminated string
- likewise, don't treat "len" as an out-parameter from generator
functions
- swap out "void *" for "char *" as appropriate to signal that we
don't handle arbitrary memory
- rename the function to anonymize_str()
This will also open up some optimization opportunities in a future
patch.
Note that we can't drop the "len" parameter entirely. Some callers do
pass in partial strings (e.g., "foo/bar", len=3) to avoid copying, and
we need to handle those still.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fast-export stores anonymized oids, it does so as binary strings.
And while the anonymous mapping storage is binary-clean (at least as of
the previous commit), this will become awkward when we start exposing
more of it to the user. In particular, if we allow a method for
retaining token "foo", then users may want to specify a hex oid as such
a token.
Let's just switch to storing the hex strings. The difference in memory
usage is negligible (especially considering how infrequently we'd
generally store an oid compared to, say, path components).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our anonymize_mem() function is careful to take a ptr/len pair to allow
storing binary tokens like object ids, as well as partial strings (e.g.,
just "foo" of "foo/bar"). But it duplicates the hash key using
xstrdup()! That means that:
- for a partial string, we'd store all bytes up to the NUL, even
though we'd never look at anything past "len". This didn't produce
wrong behavior, but was wasteful.
- for a binary oid that doesn't contain a zero byte, we'd copy garbage
bytes off the end of the array (though as long as nothing complained
about reading uninitialized bytes, further reads would be limited by
"len", and we'd produce the correct results)
- for a binary oid that does contain a zero byte, we'd copy _fewer_
bytes than intended into the hashmap struct. When we later try to
look up a value, we'd access uninitialized memory and potentially
falsely claim that a particular oid is not present.
The most common reason to store an oid is an anonymized gitlink, but our
test case doesn't have any gitlinks at all. So let's add one whose oid
contains a NUL and is present at two different paths. ASan catches the
memory error, but even without it we can detect the bug because the oid
is not anonymized the same way for both paths.
And of course the fix is to copy the correct number of bytes. We don't
technically need the appended NUL from xmemdupz(), but it doesn't hurt
as an extra protection against anybody treating it like a string (plus a
future patch will push us more in that direction).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some codepaths were given a repository instance as a parameter to
work in the repository, but passed the_repository instance to its
callees, which has been cleaned up (somewhat).
* mt/use-passed-repo-more-in-funcs:
sha1-file: allow check_object_signature() to handle any repo
sha1-file: pass git_hash_algo to hash_object_file()
sha1-file: pass git_hash_algo to write_object_file_prepare()
streaming: allow open_istream() to handle any repo
pack-check: use given repo's hash_algo at verify_packfile()
cache-tree: use given repo's hash_algo at verify_one()
diff: make diff_populate_filespec() honor its repo argument
|
|
We often skip an optional prefix in a string with a hardcoded
constant, e.g.
if (starts_with(string, "prefix"))
string += 6;
which is less error prone when written
skip_prefix(string, "prefix", &string);
Note that this changes a few error messages from "git reflog expire
--expire=nonsense.timestamp", which used to complain by saying
'--expire=nonsense.timestamp' is not a valid timestamp
but with this change, we say
'nonsense.timestamp' is not a valid timestamp
which is more technically correct (the string with --expire= as
a prefix obviously cannot be a valid timestamp, but the error is
about the part of the input without that prefix).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some callers of check_object_signature() can work on arbitrary
repositories, but the repo does not get passed to this function.
Instead, the_repository is always used internally. To fix possible
inconsistencies, allow the function to receive a struct repository and
make those callers pass on the repo being handled.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up of the hashmap API, both users and implementation.
* ew/hashmap:
hashmap_entry: remove first member requirement from docs
hashmap: remove type arg from hashmap_{get,put,remove}_entry
OFFSETOF_VAR macro to simplify hashmap iterators
hashmap: introduce hashmap_free_entries
hashmap: hashmap_{put,remove} return hashmap_entry *
hashmap: use *_entry APIs for iteration
hashmap_cmp_fn takes hashmap_entry params
hashmap_get{,_from_hash} return "struct hashmap_entry *"
hashmap: use *_entry APIs to wrap container_of
hashmap_get_next returns "struct hashmap_entry *"
introduce container_of macro
hashmap_put takes "struct hashmap_entry *"
hashmap_remove takes "const struct hashmap_entry *"
hashmap_get takes "const struct hashmap_entry *"
hashmap_add takes "struct hashmap_entry *"
hashmap_get_next takes "const struct hashmap_entry *"
hashmap_entry_init takes "struct hashmap_entry *"
packfile: use hashmap_entry in delta_base_cache_entry
coccicheck: detect hashmap_entry.hash assignment
diff: use hashmap_entry_init on moved_entry.ent
|
|
Since these macros already take a `keyvar' pointer of a known type,
we can rely on OFFSETOF_VAR to get the correct offset without
relying on non-portable `__typeof__' and `offsetof'.
Argument order is also rearranged, so `keyvar' and `member' are
sequential as they are used as: `keyvar->member'
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new option, --mark-tags, which will output mark identifiers with
each tag object. This improves the incremental export story with
--export-marks since it will allow us to record that annotated tags have
been exported, and it is also needed as a step towards supporting nested
tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fast-import has support for both an --import-marks flag and an
--import-marks-if-exists flag; the latter of which will not die() if the
file does not exist. fast-export only had support for an --import-marks
flag; add an --import-marks-if-exists flag for consistency.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fast-export allows specifying revision ranges, which can be used to
export a tag without exporting the commit it tags. fast-export handled
this rather poorly: it would emit a "from :0" directive. Since marks
start at 1 and increase, this means it refers to an unknown commit and
fast-import will choke on the input.
When we are unable to look up a mark for the object being tagged, use a
"from $HASH" directive instead to fix this problem.
Note that this is quite similar to the behavior fast-export exhibits
with commits and parents when --reference-excluded-parents is passed
along with an excluded commit range. For tags of excluded commits we do
not require the --reference-excluded-parents flag because we always have
to tag something. By contrast, when dealing with commits, pruning a
parent is always a viable option, so we need the flag to specify that
parent pruning is not wanted. (It is slightly weird that
--reference-excluded-parents isn't the default with a separate
--prune-excluded-parents flag, but backward compatibility concerns
resulted in the current defaults.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are no callers left of lookup_object() that aren't just passing us
the "hash" member of a "struct object_id". Let's take the whole struct,
which gets us closer to removing all raw sha1 variables. It also
matches the existing conversions of lookup_blob(), etc.
The conversions of callers were done by hand, but they're all mechanical
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Automatic re-encoding of commit messages (and dropping of the encoding
header) hurts attempts to do reversible history rewrites (e.g. sha1sum
<-> sha256sum transitions, some subtree rewrites), and seems
inconsistent with the general principle followed elsewhere in
fast-export of requiring explicit user requests to modify the output
(e.g. --signed-tags=strip, --tag-of-filtered-object=rewrite). Add a
--reencode flag that the user can use to specify, and like other
fast-export flags, default it to 'abort'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The find_encoding() function returned the encoding used by a commit
message, returning a default of git_commit_encoding (usually UTF-8).
Although the current code does not differentiate between a commit which
explicitly requested UTF-8 and one where we just assume UTF-8 because no
encoding is set, it will become important when we try to preserve the
encoding header. Since is_encoding_utf8() returns true when passed
NULL, we can just return NULL from find_encoding() instead of returning
git_commit_encoding.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fast-export encounters a commit with an 'encoding' header, it tries
to reencode in UTF-8 and then drops the encoding header. However, if it
fails to reencode in UTF-8 because e.g. one of the characters in the
commit message was invalid in the old encoding, then we need to retain
the original encoding or otherwise we lose information needed to
understand all the other (valid) characters in the original commit
message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Small fixes and features for fast-export and fast-import, mostly on
the fast-export side.
* en/fast-export-import:
fast-export: add a --show-original-ids option to show original names
fast-import: remove unmaintained duplicate documentation
fast-export: add --reference-excluded-parents option
fast-export: ensure we export requested refs
fast-export: when using paths, avoid corrupt stream with non-existent mark
fast-export: move commit rewriting logic into a function for reuse
fast-export: avoid dying when filtering by paths and old tags exist
fast-export: use value from correct enum
git-fast-export.txt: clarify misleading documentation about rev-list args
git-fast-import.txt: fix documentation for --quiet option
fast-export: convert sha1 to oid
|
|
Knowing the original names (hashes) of commits can sometimes enable
post-filtering that would otherwise be difficult or impossible. In
particular, the desire to rewrite commit messages which refer to other
prior commits (on top of whatever other filtering is being done) is
very difficult without knowing the original names of each commit.
In addition, knowing the original names (hashes) of blobs can allow
filtering by blob-id without requiring re-hashing the content of the
blob, and is thus useful as a small optimization.
Once we add original ids for both commits and blobs, we may as well
add them for tags too for completeness. Perhaps someone will have a
use for them.
This commit teaches a new --show-original-ids option to fast-export
which will make it add a 'original-oid <hash>' line to blob, commits,
and tags. It also teaches fast-import to parse (and ignore) such
lines.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git filter-branch has a nifty feature allowing you to rewrite, e.g. just
the last 8 commits of a linear history
git filter-branch $OPTIONS HEAD~8..HEAD
If you try the same with git fast-export, you instead get a history of
only 8 commits, with HEAD~7 being rewritten into a root commit. There
are two alternatives:
1) Don't use the negative revision specification, and when you're
filtering the output to make modifications to the last 8 commits,
just be careful to not modify any earlier commits somehow.
2) First run 'git fast-export --export-marks=somefile HEAD~8', then
run 'git fast-export --import-marks=somefile HEAD~8..HEAD'.
Both are more error prone than I'd like (the first for obvious reasons;
with the second option I have sometimes accidentally included too many
revisions in the first command and then found that the corresponding
extra revisions were not exported by the second command and thus were
not modified as I expected). Also, both are poor from a performance
perspective.
Add a new --reference-excluded-parents option which will cause
fast-export to refer to commits outside the specified rev-list-args
range by their sha1sum. Such a stream will only be useful in a
repository which already contains the necessary commits (much like the
restriction imposed when using --no-data).
Note from Peff:
I think we might be able to do a little more optimization here. If
we're exporting HEAD^..HEAD and there's an object in HEAD^ which is
unchanged in HEAD, I think we'd still print it (because it would not
be marked SHOWN), but we could omit it (by walking the tree of the
boundary commits and marking them shown). I don't think it's a
blocker for what you're doing here, but just a possible future
optimization.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If file paths are specified to fast-export and a ref points to a commit
that does not touch any of the relevant paths, then that ref would
sometimes fail to be exported. (This depends on whether any ancestors
of the commit which do touch the relevant paths would be exported with
that same ref name or a different ref name.) To avoid this problem,
put *all* specified refs into extra_refs to start, and then as we export
each commit, remove the refname used in the 'commit $REFNAME' directive
from extra_refs. Then, in handle_tags_and_duplicates() we know which
refs actually do need a manual reset directive in order to be included.
This means that we do need some special handling for excluded refs; e.g.
if someone runs
git fast-export ^master master
then they've asked for master to be exported, but they have also asked
for the commit which master points to and all of its history to be
excluded. That logically means ref deletion. Previously, such refs
were just silently omitted from being exported despite having been
explicitly requested for export.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If file paths are specified to fast-export and multiple refs point to a
commit that does not touch any of the relevant file paths, then
fast-export can hit problems. fast-export has a list of additional refs
that it needs to explicitly set after exporting all blobs and commits,
and when it tries to get_object_mark() on the relevant commit, it can
get a mark of 0, i.e. "not found", because the commit in question did
not touch the relevant paths and thus was not exported. Trying to
import a stream with a mark corresponding to an unexported object will
cause fast-import to crash.
Avoid this problem by taking the commit the ref points to and finding an
ancestor of it that was exported, and make the ref point to that commit
instead.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Logic to replace a filtered commit with an unfiltered ancestor is useful
elsewhere; put it into a function we can call.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If --tag-of-filtered-object=rewrite is specified along with a set of
paths to limit what is exported, then any tags pointing to old commits
that do not contain any of those specified paths cause problems. Since
the old tagged commit is not exported, fast-export attempts to rewrite
such tags to an ancestor commit which was exported. If no such commit
exists, then fast-export currently die()s. Five years after the tag
rewriting logic was added to fast-export (see commit 2d8ad4691921,
"fast-export: Add a --tag-of-filtered-object option for newly dangling
tags", 2009-06-25), fast-import gained the ability to delete refs (see
commit 4ee1b225b99f, "fast-import: add support to delete refs",
2014-04-20), so now we do have a valid option to rewrite the tag to.
Delete these tags instead of dying.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ABORT and ERROR happen to have the same value, but come from differnt
enums. Use the one from the correct enum, and while at it, rename the
values to avoid such problems.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename anonymize_sha1() to anonymize_oid(() and change its signature,
and switch from sha1_to_hex() to oid_to_hex() and from GIT_SHA1_RAWSZ to
the_hash_algo->rawsz. Also change a comment and a die string to mention
oid instead of sha1.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When printing variables which contain a size, today "unsigned long"
is used at many places.
In order to be able to change the type from "unsigned long" into size_t
some day in the future, we need to have a way to print 64 bit variables
on a system that has "unsigned long" defined to be 32 bit, like Win64.
Upcast all those variables into uintmax_t before they are printed.
This is to prepare for a bigger change, when "unsigned long"
will be converted into size_t for variables which may be > 4Gib.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of lookup_blob
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of parse_object_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_object to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
|
Jeff King
Junio C Hamano
Matheus Tavares
Eric Wong
Elijah Newren
Torsten Bögershausen
Nguyễn Thái Ngọc Duy
Stefan Beller