| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git describe C" finds an annotated tag with tagname A to be
the best name to explain commit C, and the tag is stored in a
"wrong" place in the refs/tags hierarchy, e.g. refs/tags/B, the
command gave a warning message but used A (not B) to describe C.
If C is exactly at the tag, the describe output would be "A", but
"git rev-parse A^0" would not be equal as "git rev-parse C^0". The
behavior of the command has been changed to use the "long" form
i.e. A-0-gOBJECTNAME, which is correctly interpreted by rev-parse.
* jc/describe-misnamed-annotated-tag:
describe: force long format for a name based on a mislocated tag
|
|
When searching the commit graph for tag candidates, `git-describe`
will stop as soon as there is only one active branch left and
it already found an annotated tag as a candidate.
This works well as long as all branches eventually connect back
to a common root, but if the tags are found across branches
with no common ancestor
B
o----.
\
o-----o---o----x
A
it can happen that the search on one branch terminates prematurely
because a tag was found on another, independent branch. This scenario
isn't quite as obscure as it sounds, since cloning with a limited
depth often introduces many independent "dead ends" into the commit
graph.
The help text of `git-describe` states pretty clearly that when
describing a commit D, the number appended to the emitted tag X should
correspond to the number of commits found by `git log X..D`.
Thus, this commit modifies the stopping condition to only abort
the search when only one branch is left to search *and* all current
best candidates are descendants from that branch.
For repositories with a single root, this condition is always
true: When the search is reduced to a single active branch, the
current commit must be an ancestor of *all* tag candidates. This
means that in the common case, this change will have no negative
performance impact since the same number of commits as before will
be traversed.
Signed-off-by: Benno Evers <benno@bmevers.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An annotated tag has two names: where it sits in the refs/tags
hierarchy and the tagname recorded in the "tag" field in the object
itself. They usually should match.
Since 212945d4 ("Teach git-describe to verify annotated tag names
before output", 2008-02-28), a commit described using an annotated
tag bases its name on the tagname from the object. While this was a
deliberate design decision to make it easier to converse about tags
with others, even if the tags happen to be fetched to a different
name than it was given by its creator, it had one downside.
The output from "git describe", at least in the modern Git, should
be usable as an object name to name the exact commit given to the
"git describe" command. Using the tagname, when two names differ,
breaks this property, when describing a commit that is directly
pointed at by such a tag. An annotated tag Bob made as "v1.0" may
sit at "refs/tags/v1.0-bob" in the ref hierarchy, and output from
"git describe v1.0-bob^0" would say "v1.0", but there may not be
any tag at "refs/tags/v1.0" locally or there may be another tag that
points at a different object.
Note that this won't be a problem if a commit being described is not
directly pointed at by such a mislocated tag. In the example in the
previous paragraph, describing a commit whose parent is v1.0-bob
would result in "v1.0" (i.e. the tagname taken from the tag object)
followed by "-1-gXXXXX" where XXXXX is the abbreviated object name,
and a string that ends with "-g" followed by a hexadecimal string is
an object name for the object whose name begins with hexadecimal
string (as long as it is unique), so it does not matter if the
leading part is "v1.0" or "v1.0-bob".
Show the name in the long format, i.e. with "-0-gXXXXX" suffix, when
the name we give is based on a mislocated annotated tag to ensure
that the output can be used as the object name for the object
originally given to the command to fix the issue.
While at it, remove an overly cautious dead code to protect against
an annotated tag object without the tagname. Such a tag is filtered
out much earlier in the codeflow, and will not reach this part of
the code.
Helped-by: Matheus Tavares <matheus.bernardino@usp.br>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up of the hashmap API, both users and implementation.
* ew/hashmap:
hashmap_entry: remove first member requirement from docs
hashmap: remove type arg from hashmap_{get,put,remove}_entry
OFFSETOF_VAR macro to simplify hashmap iterators
hashmap: introduce hashmap_free_entries
hashmap: hashmap_{put,remove} return hashmap_entry *
hashmap: use *_entry APIs for iteration
hashmap_cmp_fn takes hashmap_entry params
hashmap_get{,_from_hash} return "struct hashmap_entry *"
hashmap: use *_entry APIs to wrap container_of
hashmap_get_next returns "struct hashmap_entry *"
introduce container_of macro
hashmap_put takes "struct hashmap_entry *"
hashmap_remove takes "const struct hashmap_entry *"
hashmap_get takes "const struct hashmap_entry *"
hashmap_add takes "struct hashmap_entry *"
hashmap_get_next takes "const struct hashmap_entry *"
hashmap_entry_init takes "struct hashmap_entry *"
packfile: use hashmap_entry in delta_base_cache_entry
coccicheck: detect hashmap_entry.hash assignment
diff: use hashmap_entry_init on moved_entry.ent
|
|
While we cannot rely on a `__typeof__' operator being portable
to use with `offsetof'; we can calculate the pointer offset
using an existing pointer and the address of a member using
pointer arithmetic for compilers without `__typeof__'.
This allows us to simplify usage of hashmap iterator macros
by not having to specify a type when a pointer of that type
is already given.
In the future, list iterator macros (e.g. list_for_each_entry)
may also be implemented using OFFSETOF_VAR to save hackers the
trouble of using container_of/list_entry macros and without
relying on non-portable `__typeof__'.
v3: use `__typeof__' to avoid clang warnings
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inspired by list_for_each_entry in the Linux kernel.
Once again, these are somewhat compromised usability-wise
by compilers lacking __typeof__ support.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid derefencing ->tagged without checking for NULL by using the
convenience wrapper for getting the ID of the tagged object. It die()s
when encountering a broken tag instead of segfaulting.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are no callers left of sha1hash() that do not simply pass the
"hash" member of a "struct object_id". Let's get rid of the outdated
sha1-specific function and provide one that operates on the whole struct
(even though the technique, taking the first few bytes of the hash, will
remain the same).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The find_commit_name() function passes an object_id.hash as the key of a
hashmap. That ends up in commit_name_neq(), which then feeds it to
oideq(). Which means we should actually be the whole "struct object_id".
It works anyway because pointers to the two are interchangeable. And
because we're going through a layer of void pointers, the compiler
doesn't notice the type mismatch.
But it's worth cleaning up (especially since once we switch away from
sha1hash() on the same line, accessing the hash member will look doubly
out of place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git --work-tree=$there --git-dir=$here describe --dirty" did not
work correctly as it did not pay attention to the location of the
worktree specified by the user by mistake, which has been
corrected.
* ss/describe-dirty-in-the-right-directory:
t6120: test for describe with a bare repository
describe: setup working tree for --dirty
|
|
We don't use NEED_WORK_TREE when running the git-describe builtin,
since you should be able to describe a commit even in a bare repository.
However, the --dirty flag does need a working tree. Since we don't call
setup_work_tree(), it uses whatever directory we happen to be in. That's
unlikely to match our index, meaning we'd say "dirty" even when the real
working tree is clean.
We can fix that by calling setup_work_tree() once we know that the user
has asked for --dirty.
The --broken option also needs a working tree. But because its
implementation calls git-diff-index we don‘t have to setup the working
tree in the git-describe process.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With refresh_index() learning to utilize preload_index() to speed up its
operation there is no longer any benefit to having the caller preload the
index first. Remove those unneeded calls by calling read_index() instead of
the preload variant.
There is no measurable performance impact of this patch - the 2nd call to
preload_index() bails out quickly but there is no reason to call it twice.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comparison functions used for hashmaps don't care about
strict ordering; they only want to compare entries for
equality. Let's use the oideq() function instead, which can
potentially be better optimized. Note that unlike the
previous patches mass-converting calls like "!oidcmp()",
this patch could actually provide an improvement even with
the current implementation. Those comparison functions are
passed around as function pointers, so at compile-time the
compiler cannot realize that the caller (which is in another
file completely) will treat the return value as a boolean.
Note that this does change the return values in quite a
subtle way (it's still an int, but now the sign bit is
irrelevant for ordering). Because of their funny
hashmap-specific signature, it's unlikely that any of these
static functions would be reused for more generic ordering.
But to be double-sure, let's stop using "cmp" in their
names.
Calling them "eq" doesn't quite work either, because the
hashmap convention is actually _inverted_. "0" means "same",
and non-zero means "different". So I've called them "neq" by
convention here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of lookup_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of
lookup_commit_reference_gently to be more specific about which
repository to handle. This is a small mechanical change; it doesn't
change the implementation to handle repositories other than
the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
|
|
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
|
|
The codepath around object-info API has been taught to take the
repository object (which in turn tells the API which object store
the objects are to be located).
* sb/oid-object-info:
cache.h: allow oid_object_info to handle arbitrary repositories
packfile: add repository argument to cache_or_unpack_entry
packfile: add repository argument to unpack_entry
packfile: add repository argument to read_object
packfile: add repository argument to packed_object_info
packfile: add repository argument to packed_to_object_type
packfile: add repository argument to retry_bad_packed_offset
cache.h: add repository argument to oid_object_info
cache.h: add repository argument to oid_object_info_extended
|
|
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Placing `struct lock_file`s on the stack used to be a bad idea, because
the temp- and lockfile-machinery would keep a pointer into the struct.
But after 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05), we can safely have lockfiles on the stack. (This applies
even if a user returns early, leaving a locked lock behind.)
These `struct lock_file`s are local to their respective functions and we
can drop their staticness.
For good measure, I have inspected these sites and come to believe that
they always release the lock, with the possible exception of bailing out
using `die()` or `exit()` or by returning from a `cmd_foo()`.
As pointed out by Jeff King, it would be bad if someone held on to a
`struct lock_file *` for some reason. After some grepping, I agree with
his findings: no-one appears to be doing that.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of oid_object_info
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
|
|
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names. Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:
@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)
@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git describe $garbage" stopped giving any errors when the garbage
happens to be a string with 40 hexadecimal letters.
* sb/describe-blob:
describe: confirm that blobs actually exist
|
|
Code clean-up.
* rs/describe-unique-abbrev:
describe: use strbuf_add_unique_abbrev() for adding short hashes
|
|
Prior to 644eb60bd0 (builtin/describe.c: describe a blob,
2017-11-15), we noticed and complained about missing
objects, since they were not valid commits:
$ git describe 0000000000000000000000000000000000000000
fatal: 0000000000000000000000000000000000000000 is not a valid 'commit' object
After that commit, we feed any non-commit to lookup_blob(),
and complain only if it returns NULL. But the lookup_*
functions do not actually look at the on-disk object
database at all. They return an entry from the in-memory
object hash if present (and if it matches the requested
type), and otherwise auto-create a "struct object" of the
requested type.
A missing object would hit that latter case: we create a
bogus blob struct, walk all of history looking for it, and
then exit successfully having produced no output.
One reason nobody may have noticed this is that some related
cases do still work OK:
1. If we ask for a tree by sha1, then the call to
lookup_commit_referecne_gently() would have parsed it,
and we would have its true type in the in-memory object
hash.
2. If we ask for a name that doesn't exist but isn't a
40-hex sha1, then get_oid() would complain before we
even look at the objects at all.
We can fix this by replacing the lookup_blob() call with a
check of the true type via sha1_object_info(). This is not
quite as efficient as we could possibly make this check. We
know in most cases that the object was already parsed in the
earlier commit lookup, so we could call lookup_object(),
which does auto-create, and check the resulting struct's
type (or NULL). However it's not worth the fragility nor
code complexity to save a single object lookup.
The new tests cover this case, as well as that of a
tree-by-sha1 (which does work as described above, but was
not explicitly tested).
Noticed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
|
|
Call strbuf_add_unique_abbrev() to add an abbreviated hash to a strbuf
instead of taking a detour through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
Patch generated by Coccinelle (and contrib/coccinelle/strbuf.cocci).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
|
|
The man page of the "git describe" command explains the expected
output when using the --all option, i.e. the full reference path is
shown, including heads/ or tags/ prefix.
When 212945d4a85dfa172ea55ec73b1d830ef2d8582f ("Teach git-describe
to verify annotated tag names before output") made Git favor the
embedded name of annotated tags, it accidentally changed the output
format when the --all flag is given, only printing the tag's name
without the prefix.
Check if --all was specified and re-add the "tags/" prefix for this
special case to fix the regresssion.
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
When describing commits, we try to anchor them to tags or refs, as these
are conceptually on a higher level than the commit. And if there is no ref
or tag that matches exactly, we're out of luck. So we employ a heuristic
to make up a name for the commit. These names are ambiguous, there might
be different tags or refs to anchor to, and there might be different
path in the DAG to travel to arrive at the commit precisely.
When describing a blob, we want to describe the blob from a higher layer
as well, which is a tuple of (commit, deep/path) as the tree objects
involved are rather uninteresting. The same blob can be referenced by
multiple commits, so how we decide which commit to use? This patch
implements a rather naive approach on this: As there are no back pointers
from blobs to commits in which the blob occurs, we'll start walking from
any tips available, listing the blobs in-order of the commit and once we
found the blob, we'll take the first commit that listed the blob. For
example
git describe --tags v0.99:Makefile
conversion-901-g7672db20c2:Makefile
tells us the Makefile as it was in v0.99 was introduced in commit 7672db20.
The walking is performed in reverse order to show the introduction of a
blob rather than its last occurrence.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out describing commits into its own function `describe_commit`,
which will put any output to stdout into a strbuf, to be printed
afterwards.
As the next patch will teach Git to describe blobs using a commit and path,
this refactor will make it easy to reuse the code describing commits.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Benno Evers
Eric Wong
René Scharfe
Sebastian Staudt
Nguyễn Thái Ngọc Duy
Ben Peart
Stefan Beller
Martin Ågren
brian m. carlson
Daniel Knittl-Frank