| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git chery-pick" (and "revert" that shares the same runtime engine)
that deals with multiple commits got confused when the final step
gets stopped with a conflict and the user concluded the sequence
with "git commit". Attempt to fix it by cleaning up the state
files used by these commands in such a situation.
* pw/clean-sequencer-state-upon-final-commit:
fix cherry-pick/revert status after commit
commit/reset: try to clean up sequencer state
|
|
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
|
|
The message given when "git commit -a <paths>" errors out has been
updated.
* nd/commit-a-with-paths-msg-update:
commit: improve error message in "-a <paths>" case
|
|
This fixes a bug where the scissors line is placed after the Conflicts:
section, in the case where a merge conflict occurs and
commit.cleanup = scissors.
Next, if commit.cleanup = scissors is specified, don't produce a
scissors line in commit if one already exists in the MERGE_MSG file.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --cleanup option is commonly used. Extract it so that its definition
is not repeated.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cherry-picking or reverting a sequence of commits and if the final
pick/revert has conflicts and the user uses `git commit` to commit the
conflict resolution and does not run `git cherry-pick --continue` then
the sequencer state is left behind. This can cause problems later. In my
case I cherry-picked a sequence of commits the last one of which I
committed with `git commit` after resolving some conflicts, then a while
later, on a different branch I aborted a revert which rewound my HEAD to
the end of the cherry-pick sequence on the previous branch. Avoid this
potential problem by removing the sequencer state if we're committing or
resetting the final pick in a sequence.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I did something stupid today and got
$ git commit -a --fixup= @^
fatal: Paths with -a does not make sense.
which didn't make any sense (at least for the first few seconds).
Include the first path(spec) in the error message to help spot the
problem quicker. Now it shows
fatal: paths '@^ ...' with -a does not make sense
which should ring some bell because @^ should clearly not be considered
a path.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This hasn't been used since 17ddc66e70 (convert report_path_error to
take struct pathspec, 2013-07-14), as the names in the struct will have
already been prefixed when they were parsed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
|
|
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
|
|
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
|
|
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There were many places the code relied on the string returned from
getenv() to be non-volatile, which is not true, that have been
corrected.
* jk/save-getenv-result:
builtin_diff(): read $GIT_DIFF_OPTS closer to use
merge-recursive: copy $GITHEAD strings
init: make a copy of $GIT_DIR string
config: make a copy of $GIT_CONFIG string
commit: copy saved getenv() result
get_super_prefix(): copy getenv() result
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We save the result of $GIT_INDEX_FILE so that we can restore it after
setting it to a new value and running add--interactive. However, the
pointer returned by getenv() is not guaranteed to be valid after calling
setenv(). This _usually_ works fine, but can fail if libc needs to
reallocate the environment block during the setenv().
Let's just duplicate the string, so we know that it remains valid.
In the long run it may be more robust to teach interactive_add() to take
a set of environment variables to pass along to run-command when it
execs add--interactive. And then we would not have to do this
save/restore dance at all. But this is an easy fix in the meantime.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More codepaths become aware of working with in-core repository
instance other than the default "the_repository".
* nd/the-index: (22 commits)
rebase-interactive.c: remove the_repository references
rerere.c: remove the_repository references
pack-*.c: remove the_repository references
pack-check.c: remove the_repository references
notes-cache.c: remove the_repository references
line-log.c: remove the_repository reference
diff-lib.c: remove the_repository references
delta-islands.c: remove the_repository references
cache-tree.c: remove the_repository references
bundle.c: remove the_repository references
branch.c: remove the_repository reference
bisect.c: remove the_repository reference
blame.c: remove implicit dependency the_repository
sequencer.c: remove implicit dependency on the_repository
sequencer.c: remove implicit dependency on the_index
transport.c: remove implicit dependency on the_index
notes-merge.c: remove implicit dependency the_repository
notes-merge.c: remove implicit dependency on the_index
list-objects.c: reduce the_repository references
list-objects-filter.c: remove implicit dependency on the_index
...
|
|
Various functions have been audited for "-Wunused-parameter" warnings
and bugs in them got fixed.
* jk/unused-parameter-fixes:
midx: double-check large object write loop
assert NOARG/NONEG behavior of parse-options callbacks
parse-options: drop OPT_DATE()
apply: return -1 from option callback instead of calling exit(1)
cat-file: report an error on multiple --batch options
tag: mark "--message" option with NONEG
show-branch: mark --reflog option as NONEG
format-patch: mark "--no-numbered" option with NONEG
status: mark --find-renames option with NONEG
cat-file: mark batch options with NONEG
pack-objects: mark index-version option as NONEG
ls-files: mark exclude options as NONEG
am: handle --no-patch-format option
apply: mark include/exclude options as NONEG
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since we're going to pass 'struct repository *' around most of the
time instead of 'struct index_state *' because most sequencer.c
operations need more than just the index, the_repository is replaced
as well in the functions that now take 'struct repository
*'. the_repository is still present in this file, but total clean up
will be done later. It's not the main focus of this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you run "git status --no-find-renames", it will behave the same as
"--find-renames", because we ignore the "unset" parameter (we see a NULL
"arg", but since the score argument is optional, we just think that the
user did not provide a score).
We already have a separate "--no-renames" to disable renames, so there's
not much point in supporting "--no-find-renames". Let's just flag it as
an error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With refresh_index() learning to utilize preload_index() to speed up its
operation there is no longer any benefit to having the caller preload the
index first. Remove those unneeded calls by calling read_index() instead of
the preload variant.
There is no measurable performance impact of this patch - the 2nd call to
preload_index() bails out quickly but there is no reason to call it twice.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" learns to show progress bar when refreshing the index
takes a long time.
* nd/status-refresh-progress:
status: show progress bar if refreshing the index takes too long
|
|
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
The code in "git status" sometimes hit an assertion failure. This
was caused by a structure that was reused without cleaning the data
used for the first run, which has been corrected.
* en/status-multiple-renames-to-the-same-target-fix:
commit: fix erroneous BUG, 'multiple renames on the same target? how?'
|
|
Generation of (experimental) commit-graph files have so far been
fairly silent, even though it takes noticeable amount of time in a
meaningfully large repository. The users will now see progress
output.
* ab/commit-graph-progress:
gc: fix regression in 7b0f229222 impacting --quiet
commit-graph verify: add progress output
commit-graph write: add progress output
|
|
Status variables were initialized in the collect phase and some
variables were later freed in the print functions.
A "struct wt_status" used to be sufficient for the output phase to
work. It was designed to be filled in the collect phase and consumed
in the output phase, but over time some fields were added and output
phase started filling the fields.
A "struct wt_status_state" that was used in other codepaths turned out
to be useful in the "git status" output. This is not tied to "struct
wt_status", so filling in the collect phase was not consistently
followed.
Move the status state structure variables into the status state
structure and populate them in the collect functions.
Create a new function to free the buffers that were being freed in the
print function. Call this new function in commit.c where both the
collect and print functions were being called.
Based on a patch suggestion by Junio C Hamano. [1]
[1] https://public-inbox.org/git/xmqqr2i5ueg4.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/commit.c:prepare_to_commit() can call run_status() twice if
using the editor, including status, and the user attempts to record a
non-merge empty commit without explicit --allow-empty. If there is also
a rename involved as well (due to using 'git add -N'), then a BUG in
wt-status.c is triggered:
BUG: wt-status.c:476: multiple renames on the same target? how?
The reason we hit this bug is that both run_status() calls use the same
struct wt_status * (named s), and s->change is not freed between runs.
Changes are inserted into s with string_list_insert, which usually means
that the second run just recomputes all the same results and overwrites
what was computed the first time. However, ever since commit
176ea7479309 ("wt-status.c: handle worktree renames", 2017-12-27),
wt-status started checking for renames and copies but also added a
preventative check that d->rename_status wasn't already set and output a
BUG message if it was. The problem isn't that there are multiple rename
targets to a single path as the error implies, the problem is that 's'
is not freed/cleared between the two run_status() calls.
Ever since commit dc6b1d92ca9c ("wt-status: use settings from
git_diff_ui_config", 2018-05-04), which stopped hardcoding
DIFF_DETECT_RENAME and allowed users to ask for copy detection, this bug
has also been triggerable with a copy instead of a rename.
Fix the bug by clearing s->change. A better change might be to clean up
all of s between the two run_status() calls. A good first step towards
such a goal might be writing a function to free the necessary fields in
the wt_status * struct; a cursory glance at the code suggests all of its
allocated data is probably leaked. However, doing all that cleanup is a
bigger task for someone else interested to tackle; just fix the bug for
now.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reason rerere(), rerere_forget() and rerere_remaining() take a
struct repository instead of struct index_state is not obvious from
the patch:
Deep in update_paths() and find_conflict(), hold_locked_index() and
read_index() are called. These functions assumes the index path at
$GIT_DIR/index which is not always true when you take an arbitrary
index state. Taking a repository will allow us to point to the right
index path later when we replace them with repo_ versions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can now optionally run tests with commit-graph enabled.
* ds/commit-graph-tests:
commit-graph: define GIT_TEST_COMMIT_GRAPH
|
|
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
|
|
Refreshing the index is usually very fast, but it can still take a
long time sometimes. Cold cache is one. Or copying a repo to a new
place (*). It's good to show something to let the user know "git
status" is not hanging, it's just busy doing something.
(*) In this case, all stat info in the index becomes invalid and git
falls back to rehashing all file content to see if there's any
difference between updating stat info in the index. This is quite
expensive. Even with a repo as small as git.git, it takes 3
seconds.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix variable spelling error.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit-graph feature is tested in isolation by
t5318-commit-graph.sh and t6600-test-reach.sh, but there are many
more interesting scenarios involving commit walks. Many of these
scenarios are covered by the existing test suite, but we need to
maintain coverage when the optional commit-graph structure is not
present.
To allow running the full test suite with the commit-graph present,
add a new test environment variable, GIT_TEST_COMMIT_GRAPH. Similar
to GIT_TEST_SPLIT_INDEX, this variable makes every Git command try
to load the commit-graph when parsing commits, and writes the
commit-graph file after every 'git commit' command.
There are a few tests that rely on commits not existing in
pack-files to trigger important events, so manually set
GIT_TEST_COMMIT_GRAPH to false for the necessary commands.
There is one test in t6024-recursive-merge.sh that relies on the
merge-base algorithm picking one of two ambiguous merge-bases, and
the commit-graph feature changes which merge-base is picked.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
|
Junio C Hamano
Denton Liu
Phillip Wood
Nguyễn Thái Ngọc Duy
Jeff King
William Hubbs
Ben Peart
Stephen P. Smith
Elijah Newren
Derrick Stolee